SAP Note Note 724354 - DP90: Information from contract instead of sales doc

Hi Experts,
How to implement this Note - Note 724354 - DP90: Information from contract instead of sales document. It says use Tcode VOFM and create RV60CXXX data transfer routine.
How do we do that ?
in VOFM there is nothing.
Please suggest.

Hi,
VOFM is transaction where u create Routines in which ABAP code will be written...
For ur requirment SAP is suggesting to create COPY Control routine...
==> Go to transaction VOFM
==> In menu bar/Sub-menu, select "COPY Control", U will get a list of SAP standard routines defined there...
==> U can select one & check it u will understand the coding for it...
==> If Code is given in code... Create a new one (between 900 - 999) which is given to customers...
It will create a program... RV60CXXX where 'XXX' will be the number u give...
U have register that with SAP using the S-key for ur SAP installation & get the key....
Then u can go forward on this......................
Regards,
Bhargava

Similar Messages

Siri could not download required information from the server

I'm getting the message "siri could not download required information from the server". I haven't been able to use SIRI for 5 days. Does anyone know an answer?
I've tried turning SIRI off, rebooting, and turning it back on. You know, the old PC approach.
I have an excellent WI-FI connection.

Not an answer but I do know if I do not have a good internet connection (3G or WiFi) I get that same error. Has always cleared up for me once that was resolved.

Siri can not download required information from server

siri can not download required information from serve

Make sure you are connected to the internet whether it is via Wi-fi or 3G.
Then, try turning Siri off in Settings>General>Siri and then wait a couple seconds after it is off. Turn it back on and ask it something again.

Google cloud print for officejet pro 8600 - could not get printer information from hp.

I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
This was a big factor in purchasing this printer. Help anyone?
This question was solved.
View Solution.

Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well. Engineers are currently investing this problem to try and provide a solution to it. I want to again apologize and thank you all for your patience in this matter. They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Google cloud print "could not get printer information from hp"

As of today google cloud print has stopped working with my laser jet pro. I started getting an error message that "hp eprint is unavailable at this time". I decided to remove my hp printer from google cloud print. I haven't been able to add it back in since. Every time I try to verify the printer with google cloud print I get the error message "could not get printer information from hp". Everything seems to be configured properly as far as I can tell. I even removed the printer from hp connected and readded the printer and have changed my printers email address. Help please! I am on Chrome OS and this is the only option I have to print.

The issue just kind of resolved itself today and I was able to add the printer. I'm assuming it was some kind of server issue on hp's end because I haven't changed anything since yesterday.

Could not load servlet information from web server

I am trying to register a servlet through the web object manager.
As soon as click the web object manager menu pick I get the following
error: Could not load servlet information from web server.
On other peoples machines here it works fine and they can register
servlets. What am I missing!

You must be using Jdev 3.2.x, this is a known bug. In Jdev 9.0.2 we use the standard J2EE web.xml in order to register servlets. You should consider moving to the new IDE.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap"

Cisco Unity Connection 8.6 not getting CLID information from CUCM 8.6

Hello,
Currently Running:
Cisco Unified Communications Manager 8.6.2
Cisco Unity Connection 8.6.2
Problem:
when any outside caller leaves a voicemail, the caller number information is not being sent to unity.
example, I call with my cell phone, 817.555.1234 to my Cisco 7940 phone and it shows the CLID information that i am calling with. iDivert to voice mail, Leave a message. Playback message and just the default message information from Cisco Unity.
we currently upgraded from CUCM 6.1.3 and Unity 5. before i could press 9 and get the caller information.
I have viewed the "Playback Message Settings" and selected "After Playing Each Message, Play" and selected Sender's Information. and also selected "Include Extension and Sender's ANI"
upon playing the VoiceMail after the message i get the default message "From Cisco Unity Connection Messaging System"
I also have the message relaying to my E-mail and I get the same in the subject line.
"Message from Cisco Unity Connection Messaging System (Unknown extension)"
This tends to be a big deal with the Sales team as customers will call and say "Call me back"
But any Internal Calls show the correct information, proper greeting, extension information even on the relay to e-mail.
Any help will be appreciated.
Thanks
Tim

Found another post that referenced Cisco Bug ID CSCti37610.
CUC plays message is from Unity Connection Messaging system
Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
Workaround:
Restart the Unity Connection servers
It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

TS4079 Receiving the: retrieval failed "Siri could not download required information from the server."

I am currently connected to the internet over wifi and also tried a 4G signal. I have confirmed that locations services are on both under settings for Siri and under location services. I have turned the phone off and on. I have closed and reopened the program. I have even tried turning location services off for a minute and turning them back on.
Every suggestion I have found here, I have tried.
I don't know if this is related or not - but there is not a version number listed under Siri Settings. Could the app not have properly installed from the manufacturer?
Please HELP!!

It works now.
I went to settings, General, network, wi-fi and conected to my network.

ITunes could not load dataclass information from sync services

I'm getting this message every time i'm connecting my iPhone with my mac. When i try to sync it i get this message:
iTunes could not backup the iPhone “iPhone” because the backup session failed.
I've tried deleting all my old backups and a manual backup as hinted here but with no luck... any tips?

Re-install iTunes over your current installation from this link:
http://www.apple.com/itunes/download/

Not reading profile information from cookies..?

Hi All,
i' working on soflogin. When i loggedin to site, it is sending 3 cookies to browser, each for sessionId, profileId, and hashKe. Upto here it is working well. But , when i restart the browser without loggin out, it is not able to pick the cookies from browser, resulting in failure of the soft login. I also wrote the code to consider cookies for softlogin as follows,
<dsp:droplet name="Compare">
          <dsp:param name="obj1" bean="Profile.securityStatus" />
          <dsp:param name="obj2" bean="PropertyManager.securityStatusCookie" />
          <dsp:oparam name="lessthan">
               
               <c:set var="showLoginForm" value="true" scope="request" />
               <c:set var="useDefaultProfileValues" value="false" scope="request" />
          </dsp:oparam>
          <dsp:oparam name="equal">
               
               <c:set var="showLoginForm" value="true" scope="request" />
               <c:set var="useDefaultProfileValues" value="true" scope="request" />
          </dsp:oparam>
          <dsp:oparam name="greaterthan">
               
               <c:set var="showLoginForm" value="false" scope="request" />
          </dsp:oparam>
     </dsp:droplet>
And based on the value of showLoginForm variable , i'm displaying the loginPage.. But it is still showing the login page with empty fields instead of login with previous loggedin user login value.. (expected result)
Thanks,
VishnuVardhan

Before reading these values, check in the browser if you have the cookies present before and after restart.
Otherwise you need to look at the configurations to set the cookie.
Peace
Shaik

HP Photosmart 7510 "Could not get printer information from HP" NOT SOLVED

OK. So, I have searched all over the forums for a clear solution to this problem, and I have yet to see one that applies to my printer (HP Photosmart 7510). I have regestered the printer, selected 'everyone' in the allowed senders area, and am still receiving the same error message when trying to connect Google Cloud Print. Being able to print my google docs is EXTREMELY important... can anyone shed light on this?
If I have missed a post on my specific problem, I apologize for the double-posting.
Thanks

amp85,
The ePrint servers have been going through some heavy maintence here lately to upgrade the servers and it seems like it is causing issues with Google Cloud Print. I would keep trying and see if anything changes, it should resolve itself when the maintence has been completed. If you are still having issues after the next couple days, post back in here and let me know. Hopefully I'll have some more information about this issue by then if it has not yet been resolved.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I just got an iphone 4 but the software is upgraded on it. Siri says "Could not download required information from server"

How do I fix This?

If you have a 4 and not a 4S, then the Siri app has been disabled. Currently Siri is built into the 4S and functions only on the 4S.

Error during copying from contract to std sales - Message no. V2 005

Dear Experts,
      My client requirement is, "Qty Contract" needs to be created in the name of one Sold To Party (e.g. XYZ). After that, in the regular sales order screen after entering another Sold To Party code (e.g. ABC) the previously created "Qty Contract" needs to be referred.
                When we tried to create the regular sales order for another Sold To Party (e.g. ABC) by referring the "Qty contract" created we are getting the error message that "The sold-to parties are different. 19991 and/or 99992 (reference)" Message no. V2005
Can any experts help us to resolve this issue.
Thanks in advance
Warm Regards,
VEL

Dear Experts,
         Thanks for your valuable feedback.
But due to my client business requirement, we are looking for the solution as we told in our initial question. But we got the confident by seeing the "Message" we received during our process from SAP system. In that message its mentioned that, If Business wants the "Error" message can be modify as "Warning". So we are looking for the solution where to modify this error message in to Warning message.
Please find below the system message we received during our testing
The sold-to parties are different. T-L63C01 and/or T-S62A01 (reference)
Message no. V2005
                                                                                Diagnosis
The sold-to party in the reference document is not the same as the
    sold-to party in the target document.
System response
Depending on the copying requirements for the various sales documents
    which are defined in Customizing, this message appears either as an
    error message which requires a correction or a warning which can be
    skipped over.
Procedure
Procedure for
-   Error message
      Select a suitable reference document which has the same sold-to
      party as the target document.
-   Warning
      Proceed as described for the error message or skip over the
      warning with ENTER.
      If you skip over the warning, only the item data from the
      reference document is copied into the target document.
Warm Regards,
VEL

SAP Note Note 724354 - DP90: Information from contract instead of sales doc

Similar Messages

Maybe you are looking for