SAP Note Number: 852443 | Runtime Error MESSAGE_TYPE_X in Data Source over HANA Source System

Hi,
I am facing an issue for Inconsistency in Delta extraction due to a Init Request Mismatch.
I found out an SAP Note 852443 for the same and it provided me with a workaround solution for the same.
But , this Issue is frequently reappearing for the same Data Source and I need to find a permanent fix/solution for the same.
Kindly help me in this.
Thanks,
Vimarsh

Hi.....
I have gone through the SAP note......what I have understood I will explain you....
1) You need to compare the Init request (ex : REQU_44H2K09BTG5799G2JXCORI1O5) in both BW and R/3 side....both should be same......
In the R/3 side the value of the field : RNR of the table :RSSDLINIT should match with the value of the field : INITRNR of the table ROOSPRMSC in the R/3 side.....
2) If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).........this step is very simple.......
3) But the confusion arrise when value is there in the table RSSDLINIT in the BW side.......then check the same Request number in the table ROOSPRMSF and ROOSPRMSC tables with the INITRNR field.
If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers...............it means if the value doesn't match or multiple values are there then also same solution ...........i.e...........use transaction RSA7 in an OLTP source system to delete all entries ...............then use the Program : RSSM_OLTP_INIT_DELTA_UPDATE and then delete all init selections in the 'Scheduler/Init selections in the source system' menu in the InfoPackage.......
4) But if it is a DataMart datasource that is a Export Dtasource then the solution is different.........starting with 8
But I don't want to confuse you.........first check whether is is a Export Datasource or not.....
Regards,
Debjani.....

Similar Messages

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

SAP Note Number: 953823 says string not supported in FM ??

Hello Friends
I am desperately trying to findout how to send a variable length string from XI and save it in a table.
However, SAP Note Number: 953823 says that STRING is not supported in FM but the work around it suggests is as follows:
========================================================
The only work around for this is :
To wrap the Function module used in function control with the custom function module,which substitutes the STRING parameter with CHAR datatype.
========================================================
But the problem is that for CHAR datatype you have to give the field length, the requirement I have is to send a VARIABLE LENGTH data.
Could some one help me in understanding how this can be achieved?
Thanks a lot in advance
Ram

Interesting question. Maybe I don't completely understand. When you say store it in a table, do you mean a database table or an itab?
I seem to be able to pass a string to a FM. Am I doing something wrong?
I created a type of string called "ZTYSTR".
I then created this FM.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_STR) TYPE ZTYSTR
DATA:
     l_string   type string.
l_string = i_str.
ENDFUNCTION.
Then I call the function module as such.
REPORT zz_temp.
DATA: g_str TYPE string VALUE 'Hello World'.
CALL FUNCTION 'Z_TEMP'
EXPORTING
    i_str = g_str.
Debugging the FM, it says that both the parameter and local variable are of type string.

TS3212 Just attempted to download current update of Itunes into my HP windows 7 computer. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714)

Need SAP Note NUmber

Hi,
I need form24Q version 1.28 sap Note number. Anybody knows the SAP note no for that plz let me know
Regards,
Prasad

Dear Prasad,
The last note regarding this form I could find is note 1355062 New Form 17-as per the Income-tax (8th Amendment) rules 2009
Hope this help
Sarah

'Error Occured in the Source System' for Non SAP system

Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?

Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R.

Error message from the source system

Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
Vish

I see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish

Error occurred in the source system

Hi,
I am receiving the below error while loading data from APO system
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
******On further investigating the error message I get the following Diagnosis and Resolution details.*****
Diagnosis
    The sequence for creating time series in LiveCache is:
    1. Characteristic value combinations are created which in turn create
        planning object in the system
    2. The combination of version, planning area, and planning object is
        initialized, creating time series in LiveCache. This combination is
        so to speak the LiveCache anchor.
    This error occurs if
    o   New characteristic value combinatons have been created for the
        master palnning object structure that is assigned to the planning
        area, but the time series objects were not created.
System response
     Processing cannot continue.
Procedure
     There are two methods of creating time series objects for individual
     characteristic value combinations:
         a) Re-initialize the version without deleting the time series
             objects beforehand.
         b) Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
     In general SAP recommend that when you generate new characteristic value
     combinations, you set the Create time series objects indicator. This
     prevents this error from occurring.
Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
Regards,
Tyson

Hi tyson,
Has it run good before? if yes, try to restore the source system.
by right click on the source system then choose restore.
It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
hope it help. Give point if you see its helpful.
Chuong Hoang

Error while deleting data source : Message RSO414

Hello Guys,
We have activated data source 2LIS_04_PKKANBAN and entire standard BI content . When i tried to extract data, i got 0 records initially and after that i came to know that some functions needs to be activated in ECC to extract KANBAN data.
We activated some function and deleted & filled setup tables for KANBAN and i can see data in RSA3 (368 Records). Then i tried to extract data into SAP BI. it took me 20 minutes but ended with error. "Data Source needs to be activated again as it was changed (We just activated one function only) nothing changed to data source" I activated data source again in ECC and replicate on SAP BI side but i am not able to get it in activated mode.
I tried to activate it manually and it takes 20-25 minutes but i am not able to activate it and getting error "Error when activating DataSource : MESSAGE NO RSO414 " "Error when resetting DataSource 2LIS_04_PKKANBAN to the active version". i also can't delete data source as when i try to delete it, i get the error "ERROR WHEN DELETING DATA SOURCE : MESSAGE NO RSO414" . What to do in this situation ?
Regards,
Komik Shah

Hi Rahul,
I tried it but it didn't help me.
Also there is no FM in SAP BI called RS_DATASOURCE_ACTIVATE_ALL. I have activated data source in my ERP system and replicated same on BI side as we don't have standard Transfer Rules or Transformation, i can't use RS_TRANSTRU_ACTIVATE_ALL .
Regards,
Komik Shah

An error occurred in the source system, DBIF_RSQL_SQL_ERROR

Dear All,
last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
the error i found
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"BWFIR_READ_BSID_CPUDT_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU10"
"BWFIR_READ_BSID_CPUDT_DATA"
please any one help on this issue
Advance in thanks
Regards
Priya

Hi,
Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
Can you please let me know if it got fixed.
Thanks & Regards,
VR

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error in generating data source from planning area

Hi experts! I have an error while making data source from planning area:
after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
Syntax error in program /sapapo/cl_im_extract_ex======cp
the main reason: the type /BI0/9A0IVWKNDGD is unknown
what you can suggest to solve this problem?
Thanks.

Dear Andrey Kudriavzev,
The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
Search for an OSS Note. Raise one if you cannot find the relevant notes.
Regards,
Naveen.

Error message: While activating source system in RSA1

When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
System response: Error when sending data to BW.
Procedure: Enter Idoc type ZSAE008.
Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
Can anybody kindly help me resolve the issue.
Message was edited by:
Muzafaruddin Mohammed

Hi,
You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P

An error occurred in the source system

Hi Gurus,
when i am trying to load the data into the master data object 0PMNT_BLOCK_TEXT ,I am getting the error "an error occured in the source system"with caller 09. and the error message contains "no transfer structure available for info source 0PMNT_BLOCK_TEXT in the source system and "errors in source system".
I have loaded the data in development and quality environments succesfully.this problem is causing in production environment.all other loads are working fine.
Please give me your valuble inputs.
regards
Sridhar V

Hi,
there may be no connection with source system to BW system.
please check the same in RSA1 Source system tree for the source system, context menu, check the connection.
if not activate the transfer stru. of this object in BW system by replicating the datasource.
Regards,
Vishwa.

An error occurred in the source system (DB Conect)

Hi,
It message appear while an ODS was loading data fully to a Cube.
Please, can anyone help me to solve this problem?
Thank you very much in advance.
Jorge
Mensaje de error del sistema fuente
Diagnóstico
An error occurred in the source system.
Actividades en el sistema
An error occurred in Extractor .
Check the error message.
Procedimiento
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.

HI,
go to RSA1->Source systems -> Right-click -> check. if the connection is OK then, u will find the message in the status bar saying that, source system connection ok.
otherwise select the source system>context menu>activate.
if its activated then replicate your data source if it is giving error while activating source system, then contact your BASIS Administrator to activate the Source system.
plz assign points
regards
vadlamudi

SAP Note Number: 852443 | Runtime Error MESSAGE_TYPE_X in Data Source over HANA Source System

Similar Messages

Maybe you are looking for