SAP Notes and Packages

HI
Before uploading the SAP release note or packages What are things should taken care and also help me in the uploading the SAP Notes or packages
regards
sathish kumar

The care required to be taken is to go through the notes carefully & analyse implication.
If SAP Note is to be applied, It is normally done by Abaper, incase of Code Correction, alternatively, if customizing changes recommended, it requires to be customized.
Incase of Package application, this is normally done by basis person.
After SAP note / package applied, we require to test the scenarios in test server, before applying the same to Production Server.
Regards,
Rajesh Banka

Similar Messages

SAP Notes and OSS notes

Hi Gurus,
1) Is there any difference between the two or are they used interchangeably?
2) They are 6 digit numbers. Any significance attached to any of the numbers ? I mean Notes Beginning with a "1" belong to performance category or Notes number beginning with a "2" refer to another category... something of that sort?
Many thanks in advance Points will be assigned for helpful answers.
Shivu

Hi,
1. there is no difference between a SAP note and an OSS note: they're the same as far as I know.
2. there is no numbering convention as far as I know either....
hope this helps...
Olivier.

Sap notes and general site usability

Why can't i find sap note 1219819? It was referred to me by a regular poster on the forums, http://forums.sdn.sap.com/profile.jspa?userID=3852876. if it's legitimate, then why does it not show up in searches, neither on the site or Google? Why is there no page for listing, searching and viewing sap notes? Why is it, in general, so hard to find the info I need on this site? I loathe having to use this site.
I recommend improving the search feature and make the site easy for new users to zero in on what they might be looking for.
(Rant complete)
-K

>
visualkev wrote:
> That's the key to support. You have to assume that someone coming into a forum asking questions doesn't know what you know and you therefore have to mention the obvious little bits, because they are not readily apparent to the casual (noob) observer.
Well, this isn't a support site, it's a user forum. (actually, it's meant to be an expert forum, but we'll let that go for now). So basic knowlege is assumed.
Anyway, you can find notes at service.sap.com.
Rob

Re: sap notes and sscr

Hi,
1.What is sapnotes. How far it willbe useful for abaper. What is the way to see the sap notes.
2. what is sscr key

Hi prasad,
check this links...
for 1
https://websmp104.sap-ag.de/notes
for 2.
The SSCR (SAP Software Change Registration) is a procedure, valid from Release 3.0A, which registers all manual changes to SAP sources and SAP Dictionary objects. SAP matchcodes and tuning measures such as the setup of database indices and buffers are excluded from the registration. With this procedure, the availability and reliability of productive R/3 installations is further improved.
https://websmp104.sap-ag.de/notes
after clicking this link see the option Keys & Requests and check for SSCR Keys
hope this helps you.
reward points for helpfull answers and close the thread if your question is solved.
regards,
venu.
Message was edited by: Venu Narayana

Funny SAP notes and/or ABAP coding

yesterday i was searching for a note. as happens sometimes i got a hunch that i had better check on the code, so it was due to that hunch that i found this in note [730545 correction 437023|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=730545&nlang=EN&smpsrv=https%3a%2f%2fwebsmp106%2esap-ag%2ede]
PERFORM get_allocation_data
            TABLES
                 p_atpallx
                 p_atpcsx
                 s_qtdatx
                 s_qtobjx
                 s_qtcorx.
*   these are the adventures of the new spaceship BERID;
*   she intrudes into MRP areas where no man has gone before;
i had to laugh so hard, i almost fell off my chair. and obviously BERID has been cruising MRP for quite a while, since we now have a 'new' BERID.
there must be others out there - anybody met some?

as stated earlier, a lengthy topic on SapFans as tons of funny references in SAP code:
http://www.sapfans.com/forums/viewtopic.php?t=103417
And a funny OSS note - 60233:
STEP 8. Rerun your long running report, and hope it works. If it runs for many
many hours, one example ran for 18 hours then crashed, hen there is not much more
you can do! I generally cry, kick my PC, then go down to the pub and drink lots of
beer . But seriously, if all spare space available has been added to your
PSAPROLL tablespace and created the bigest rollback segments possible, and the
report still crashes with an ORA-1555, then a serious look at what the report is
doing and how to make it run faster is the only remaining solution.
this text was deleted, but it is still available in old notes versions such as version #26.
by the way, Mylene's text was reported at http://www.sapfans.com/forums/viewtopic.php?t=103417#383142

New Tool to Automatically Search for SAP Notes and detect Customer Code.

Dear Gurus,
Please check this interesenting blog with a completely new approach to the note search for bugs and more:
/people/carlos.martinezescribano/blog/2010/12/16/automated-note-search-and-customer-code-detection
And feel free to post your comments on the blog.
Thanks a lot,
Carlos Martinez Escribano.

Now Automated Note Search Tool is a standard application:
http://service.sap.com/sap/support/notes/1818192
Regards,
Carlos.

Document Printing - Delivery Note and Packaging

Hi Experts,
When I print my Delivery Notes through Document Printing my Packaging Document prints off automatically. Please can you tell me if it's possible to switch this off so when I print my Delivery Notes through Document Printing only my Delivery Note prints off without the Packaging Note also printing.
Many thanks for any help,
Caroline

Hi Gordon,
Thanks for your reply.
The options I can see on my Document Printing are:
Document Type - I've selected 'Deliveries'
Series - I'll selected 'All'
When Batch/serial No Exist, Print - no matter what I select here I always get the Packaging Note printed.
Is there anyway to stop the Packaging Note being printed when printing the Delivery Note through Document Printing?
Thanks so much for your help.
Caroline

SAP Portfolio and Project Management: u201CCustomer Connectionu201D

SAP Portfolio and Project Management: u201CCustomer Connectionu201D
SAP Portfolio and Project Management is one of the first focus topics of the [Customer Connection initiative|https://service.sap.com/influence].
The related developments are delivered by SAP Notes and/or by Support Package (SP) only (in case delivery by SAP Note is not possible). Target releases are 5.0 (for all points) and 4.5 (for those points where it is technically possible and reasonable to downport).
[Composite SAP Note 1631964 |https://service.sap.com/sap/support/notes/1631964]collects and links all SAP Notes released for Customer Connection for SAP Portfolio and Project Management. It also includes a PDF file giving an overview of all released Customer Connection PPM developments as well as a PDF file with details about each released Customer Connection PPM development.
An overview about all influence channels for customers can be found under [https://service.sap.com/influence|https://service.sap.com/influence].
Kind regards,
Florian

Hi
Thanks for your Valuable information -Customer connection PPM.
Regards
PP

Is the SAP note (old, 2001 year) valid?

Hi!
I am trying to create source system in BW to connect from BW-system to SAP source system. I can connect to SAP system but when I click on use (RFC connection) I get message "Error during insert in port table". I found SAP note with number 110849 but it is was released in 2001 year. I work with Netweaver 7.0. Can I use this note to correct error?
Thanks,
Olga

Olga,
There is another alternative solution here which does not require transaction SNOTE usage - go to SAP Service Marketplace, open the required SAP Note and check section "Affected Releases", where you will be able to find out information on software components' release versions which are affected. Just find out if the one which you use is in the list - if not, then the SAP Note is not applicable for your system. The second step in case the first one is passed and you found your release version in the list of affected releases is to verify Support Package level: ensure that Support Package which delivers the correction for this software component hasn't yet been implemented in your system (if it or higher Support Packages are implemented, then you should already have the correction applied in your system).
My regards,
Vadim

Securing payload in message monitoring using SAP note 1370334

Hi Experts,
I am working to implement SAP note 1370334 to PI server.For that i have created :
1. an xml file having actions and roles according to the SAP note and zipped in .EAR file and given to BASIS team to deploy that .EAR file.
2.BASIS deployed that .EAR file successfully.
To test whether the SAP note has been uploaded successfully or not, we asked BASIS to create two 'test user ids' with minimum authorisation.
When I am testing through RWB to see payload without assigning any roles to the created test user, it is showing 'No authorisation'.
But when we assigned role to one test user, both the test user are able to see the payload.But according to the SAP note, payload should be visible to one user only not to the other.
And according to roles assinged in Action.xml file, display authorisation is only from sender service 'A' to receiver service 'B' but message content are visible for all services.
Canm anyone help me why is it happening or where I am going wrong or suggest me if I am testing in wrong way??
It's Urgent!!!
thanks in advance.

hi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal

SAP note 1941092 hasn't been updated in a while

SAP note 1941092 hasn't been updated in a while (2+ months), the last version covered is 1.2.4. At least changes for 1.25, 1.4.0 and 1.4.4 are missing. Would somebody from the UI Theme Designer team please update the SAP note and keep it up to date? Thank you.

Hi Samuli,
Note 1941092 as well as note 1852401 had been updated on 1.4.x - finally

Error in TDS Calculation(/4T1) after implementing SAP Note

Dear Experts,
I have implemented SAP Note and followed the steps suggested by SAP. I have processed payroll and found that /4T1 Income Tax 02 is still showing 30,000. Kindly attached screenshots of tax slab and RT for your reference.
Kindly suggest.
Regards
Ravi Kumar

Dear Experts,
It was observed that for senior citizens, system is calculating on 2,50,000 instead of 3,00,000. Kindly find attached screenshot of RT for the employee whose age is 62.
Regards
Ravi Kumar

Help on SAP Note

Hi,
Could you plz tell me what is the SAP Note and how to update this. Update New fields in Structures.
Regards
Reddy

Hi,
Some times some where Customer need more functionality that the original one, or some one wants extra fields and some customers want some others, so SAP has given this notes to solve the problems, it is nothing but Patches to SAP.
To apply OSS notes to my R/3 system:-
http://www.sap-img.com/basis/oss-notes.htm
Regards
Sudheer

How to Upload SAP notes

How to Upload SAP notes in the system.
Can anybody tell me the step by step procedure.
Thanks & Regards
Mayank Tyagi

Hi,
Go to Tr Code.SNote
1. Check the OSS no whether already been downloaded or not,
2. if not download it
3. it will be in the New tree.
4. FInd your note and double click on the same. then Pdf will open
5. Read it properly check whether it can be implemented it or cn not be implemented
6. If can be implemented then implemetnte the note and create a request for the same.
7. once implemented then go to consistant portion then change the status of the Notes for this you need to go to the SAP Note and change the note processing status to completed.

Note : Soms times the SAP tells to download the files from the Service.sap.com and for some notes u need to create a field or new objects. For this u need to get the Access key from ur team and change the same.
Lastly go inside the report and check whether the changes have been done or not.
sometimes changes may not be there. this will lead to problem
Hope this will help you
Sail

Doubts relating to SAP Notes?

Dear All,
Being a new bee to ABAP environment, I am eager to know some information regarding SAP Notes.
often I am hearing that SAP notes have to be implemented for some programmes. Why we implement SAP notes, and how we add sap notes to the programmes.
If I want to add a note to Purchase Order process, under which transaction can I add, does it change any standard behavior of the system?
What is Development, how does it differs with standard sap process?
under which transaction all this developments take place,
How can I see all developments done by a consultant in a project?
Please clarify my doubts and your help will be highly appreciated
thank you
Raghu Ram

Hi,
Please do not create multiple threads for same question.
Your question has been answered in ABAP general forum.
How and Where SAP Notes have to be implemented?

SAP Notes and Packages

Similar Messages

Maybe you are looking for