SAP notes applied to a TX
Hi Experts
I am investigating a probelm related to some TX's e.g MB1B, MIGO.
How do I know that what SAP notes have been applied to a SAP tranasction.
Pls advise.
e.g. I may have to apply a SAP note to a TX but before that I want to make sure that what notes have been applied so far
Regards
Gaurav
The program related to MB1B...., MIGO is <u>SAPMM07M</u>, please check the program and program versions. If there are descriptions or comments maintained while applying the note then you can easily find it. Or please check the transaction SNOTE which will list you all the oss notes applied,
Also please check SPAM transaction from which you can find the package name of the OSS note in which it is included.
In every Oss note it will be mentioned in which support pack this OSS note belongs to, please check if that support pack exists in your system then it is implied that this Oss note is present in your system.
Hope this helps you.
Similar Messages
-
Report to find the SAP NOTES applied
Is there a way to generate a report in solution manager which gives us a list of SAP NOTES applied in our R/3 or BW servers.
Thanks,
KiranHi
What Rajeev was tryin to say is... you implement E2E root cause analysis in solution manager system.
sub component under root cause analysis is "Change analysis" this will give details about notes implemented in satellite system.
There is also feature called change reporting, even this can be used for getting details about notes applied.
for more details chk
service.sap.com/diagnostics.
Regards,
Shyam. -
Hi Folks,
I need to apply Sap note 791240 in my dev system.I have run SNOTE & down loaded note .But i cannot see that note in the NEW list.Can any body let me know whether it is down loaded to the system or not.Also is there any other go to apply THE ABOVE NOTE.Please help me out on this issue.
Thanks in advance,
Regards,
chanduHi Rohit,subash
when i tried to implement that note i got a screen saying to upload some list of sap notes n i did but finally after giving reauest no it terminated does this going to make any thing wrong in my dev system?
Please suggest me what exactly i need to do.
Thanks guys in advance,
Regards,
chandu -
SAP NOTE APPLIED OR NOT?
HI all,
how to know the particular sap note is applied or not in the system >
regards ,
Srinivas .Hi there,
You use transaction SNOTE and click on Ctrl+F9. This will check if the note is already installed or not.
If not, and you want to install it, click on download note, and then apply it in DEV and afterwards transport it to production.
Diogo. -
Checking SAP notes on Solution Manager
Hi...
I need to get a report with all the SAP notes applied in my ERP environment.
If I use tx code snote, on ERP, I can find this, but I need something on Solution Manager, like a report...
What can I do?!
Thank's in advance.Hi,
If you have already configured Diagnostics,(Solution manager Diagnostics - SMD and its a must for this activity), call Txn-> Solman_workcenter -> Root cause Analysis-> End to End Analysis->Select your system <SID>-> Change Analysis-> Select the Time Frame->goto notes ->Jump in-> to change Reporting ->Export the Result(if needed).
Or
Under RCA- Call system Analysis -> Change Reporting -> Select the instance and Get the suitable Extractor to get this :).
Hope this helps.
PS: If you have not configured Diagostics yet, Do configure it in first place, other wise, you don't have an option in solman and had to ge the individual reports from remote/satellite systems :(.
Kindly revert for any issues.
Thanks,
Jagan -
Issue : Regarding SAP Note 1465628
Dear All,
we have to Implement the SAP Note No 1465628 , For that During manual Corrections , we are Unable to Upload the HR_IN_ESI_005_99 , it is saying
ERROR Ocuured unknown file Format (unknown)
Our System is ECC6 , Please help on this to Get the SAP note Apply.
Thanks & Regds
Manish
Edited by: Sikindar on Jun 10, 2010 5:18 PMRegarding your query, to use the transaction SFP you have to install and configure ADS (Adobe Document Services). Can you please check whether you have done the necessary configuration or not?
Please have a look at note 894009 and the reference note attached to it.
Regards
Ramana -
Hi,
Is there a Transaction where I could track the SAP Notes applied. This should give me all SAP Notes applied and when it was applied.
Thanks,
KishanHi,
You can Track using T-code SNOTE and go-to SAP Note browser. Check for the Implementation status 'Completely Implemented'. check the Note log for more details.
Maually applied notes you can track thru Transport Request numbers.
Best Regards,
Swamy. -
Help on applying Workflow Relevant SAP Notes in Production
Hello,
Can you please provide your input whether we should apply below mentioned SAP Notes in Production system.
1.SAP Note-0001925195
Symptom-
In the context of event generation for system and user status, the system no longer generates the event)
2. SAP Note-0001946643
Sympton-
The following runtime error occurs in your system:
Category ABAP Programming Error
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Except. CX_SY_REF_IS_INITIAL
ABAP Program CL_SWF_RUN_WIM_LOCAL==========CP
Application Component BC-BMT-WFM
The problem occurs only if you use an API to start a new work item within the execution of another work item. Additionally, you use an ABAP OO methods in the work item task.
3. SAP Note-0001935328
Symptom-
A runtime error occurs when you call the workflow outbox or a corresponding API.
Runtime error EXPORT_NO_SHARED_MEMORY
Exception CX_SY_EXPORT_NO_SHARED_MEMORY
The short text of the runtime error tells you that the EXPORT data cluster is too large for the SHARED MEMORY. The termination occurs in the class CL_SWF_RUN_OUTBOX_PERSISTENCE
I would appreciate quick response with reasons on same.
Regards,
Sudeesh SoniHi Abdullah,
We are not applying given SAP Notes directly into Production.
Basis team is applying the Support Package stack(SPS) and further, they would like to know the impact of applying above mentioned SAP Notes.
Regards,
Sudeesh Soni -
Regarding applying SAP Note 1172084
Hi all,
I have applied SAP Note 1172084 - PKMC: Dump DYNPRO_NOT_FOUND for control cycles of type SeqJC through SNOTE as we are receiving run time error Dynpro Not Found...Even though it didnt solve our problem..
Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
Could you pls. help in solving the problem..
Thanks,
Subbu> Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
There are corrections in the note, if you scroll down to "correction instructions" for your release and you open it, there are 4 program changes displayed.
If you can apply the note via SNOTE and the program is still dumping I'd open an OSS call.
Markus -
No default workstation application TRM on applying SAP Note 1320374
Hello Gurus,
My question, as you can see in the title is that I'm trying to apply the SAP Note 1320374 and in the step B7 it sais that you have to go to this path,
IMG--> Cross-Apllication Components -->Document Management --> Control Data --> Define Document Types
and enter:
Default Application: TRM
Dis. WS Apllic. : TRM
and some more data.
And the question is that I don't have defined 'TRM' application in my system, so I've discovered that I can create that application by going in the spro to the path "Define Workstation Apllication" but i don't know the data I have to put on it.
I would appreciate if someone let me know what is the necessary data on that application.
Thanks!Maybe if I put the full path where the Define Workstation Application is located, someone could check if has the entry TRM on it.
Path: IMG--> Cross-Apllication Components -->Document Management --> General Data --> Define Workstation Application
Any response will be highly appreciated
<< Moderator message - Please do not promise points >>
Edited by: Rob Burbank on Jan 17, 2011 4:29 PM -
Dear all,
I want to apply a sap note 1105997 on my system. I have downloaded it in tcode snote. i have some queries in this regarding.
1. I should implement this note from client 000 or my 800 client.
2. In status, it is showing status *cannot be implemented*. What should i do?
3. Tel me the step by step procedure to implement it.
4. In future, when i will implement the support pack in which it is delivered, what will i have to do?
Thanks in advance,
AnkitHello Ankit,
Here are you answers
1. You can apply the note in any client
2. That means that you can't implement the note either the note has been implemented with the support packs that you have done already or this is not valid for you version
3. Please use the following link for applying note
http://www.sappoint.com/PHPWebUI/Documents/OSS%20Note%20Application%20-%20Using%20SNOTE.pdf
4. You will need to do Modification adjustments through SPAU if any condition like this happens
Hope it helps
Rohit -
Applying SAP Notes or BWDK*
Hi Experts,
I had issue Info-object and SAP suggested
" Import Support Package 16 for SAP NetWeaver 7.0 BI (BI Patch 16 or
SAPKW70016) into your BI system. The Support Package is available
when Note 1074388 "SAPBINews BI7.0 Support Package 16", which
describes this Support Package in more detail, is released for
customers."
But how do i do that?
How can i import the support pack first to DEV system and test it ?
Can somebody give me step by step procedure ?
I will assign pointsHi,
Pls Go to service.sap.com/https://websmp103.sap-ag.de/notes ---> click on SAP note search under SAP Support portal,You will have to log in with a valid user id and password.
You can search notes by typing the SAP Note Number, download it & There will be instructions for applying notes.
Hope this helps,
Regards
CSM Reddy -
Applying SAP Notes using SNOTE
Hi,
I have question regarding transaction SNOTE.
I am applying one note in my development system. This SAP note has some manual steps, like create function module in the given function group with the given short text.
If I follow the manual steps mentioned in the note, it ask for Access key while saving the changes.
How to work on the manual steps mentioned in SAP notes?
Regards,
YogitaHello Yogia,
It doesn't make any difference. Do it as the Note has Mentioned. If system ask for the access key then you can contact your BASIS people.
They will generate a Key for you.
Thanks,
Chidanand -
Modification problems while applying SAP Note manually
Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note -
Outdated prerequisit when applying SAP Note
Hi Experts,
Ask a noob question here.
When we apply SAP note, SAP may popup the window to download an outdated prerequisit. For example, when I apply note A on release 700, system may popup to let me download note B, whose fix has been included in release 700. In this case, shall I just go ahead to download the old prerequisit in order to apply the new note?
Actually I awlays download the old note in order to apply the new note. There seems to be no impact. But I want to know if there is any offical note from SAP to confirm the approach.
Many thanks!
Regards.your approach is good.. is what you should do.. just an advice.. before going to the SNOTE to implement the notes, try to trace the requirements by yourself, to know what you are applying, read carefully the notes and the pre-requisites, after this apply the notes.. this is what I always do to know the impact..
Regards..
Esteban
Maybe you are looking for
-
24" iMac will only boot in safe mode
Here is the short version: I have a 24" iMac Core 2 2.16 GHZ with Lion installed (has been for a long time). It will only boot successfully in safe mode. The AHT Extended tests do not report any problems. I have reset PRAM and SMC. Nothing helps.
-
Application Server File Status
Hi, I'm trying to read a file from AL11 which is written by a standard program. I want to ensure that file is completely written on Appl. server by the standard program before I start reading that file from my Custom Program. Kindly Tell me the metho
-
I recently imported pictures from my camera to iphoto. I also synced my ipad. In less than 24 hours my photos are now missing from iphoto even after trying to sync my ipad again. These pictures are from a very special occasion and I did not even get
-
NRW files from Nikon P340 in PSE11
I have PSE11. I recently purchased a Nikon P340 which uses NRW files. I cannot open these files in Camera Raw 7.4. Any solutions?
-
I have a need to find a way to "trisect" my iTunes library to make way for movies, as I rip my DVD library. Ideally, I would like to get all movies on an external drive (3 TB) and leave music and podcasts on the internal drive where they now reside.