SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1

Hello members
The last time I install SAP on IBM i was about 3 years ago with ECC 6 on NW 7.00 on IBM i V5R4. Now, I have to install ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1 for my new customer (only the ABAP ERP components - not CRM, SCM, SRM or Java stack). I try to first gather all important SAP notes that would be useful for me in doing the installation. By far, I identify note 1234455 (NetWeaver 7.0 EHP1/Business Suite 7 - IBM i) and 1432783 (Known Issued with IBM i 7.1). Is there any other notes I should be aware of for a successful installation?
I also need to identify the list of installation DVD that I need for this installation but, so far, I can identify DVD 51038620 (Install Master) and 51036902 (Install Export). I know I need more DVD than these two but I could not find any SAP notes that list all the DVD number I need.
Any suggestion would be very much appreciated?
Thanks.

Hello Satid,
nice to hear from you )
As you already pointed out, it is always useful, to read and apply the notes ...
What is special here ?
- Installation runs similar to your ecc6 stuff from 3 years ago - we typically replace the kernel of the kernel CD with a new patch level on the CD already.
- the big point is, that the system does NOT have EHP4 installed when you are done with SAPinst ;-(
you do have NW 7.01 and ERP6.00 => you have to start SAPEHPI immediately after that for all the components, that you require on EHP4. This is 95% of an complete upgrade => the installation is 2 . 3 times the effort of what wou would expect ...
If you do have questions, don't hesitate and contact us.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

Similar Messages

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

What is the new sap note for Ptax slabs of FY 2011-12.

Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.

Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha

SAP note for implementing FM CONVERSION_EXIT_MATN2_OUTPUT

Hello Experts,
I need to implement the FM CONVERSION_EXIT_MATN2_OUTPUT ( + Conversion routine MATN2 ) in our SAP system version 4.7. Can anyone tell me if there are any specific SAP note for implementing it.
Note: Our SAP system dont have DI software component. I want to implement the FM without going for DI.
Awaiting reply,
Thanks,
Balaji
Edited by: Balaji on Jan 19, 2009 11:59 AM
Edited by: Balaji on Jan 19, 2009 1:02 PM

Thanks.

SAP Note for XD99 : Data changed but Output screen show error message

This is regarding the XD99.. Mass data update.
I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
Is there any Sap Note for this.
Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
Moderator message: please have a look in the Service Marketplace yourself.
Edited by: Thomas Zloch on Dec 9, 2010 2:58 PM

Hi there, gwinslo. You have come to the right place.
From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
This is not a cure but will make it easier if Firefox locks up.

SAP NOTE for Error in MB01

Hi,
I am searching for a SAP NOTE for an Error in MB01
Error is :Check Table BIWE: Entry 0004 not found.
Please let me know if anybody implemented note for this error.
Iam searching in SAP Marketplace but didn't find the right one.
<removed_by_moderator>
Thanks,
Rhea.
Edited by: rhea on Jul 24, 2008 4:21 PM
Edited by: Julius Bussche on Oct 7, 2008 5:09 PM

Error No is M7001.
This error is raised when the internal table BIWE and MSEG doesn't match ie. biwe-zeile NE mseg-zeile.
I searched with those keywords (BIWE , MB01) but didn't find the right one.
Regards,
Rhea.

SAP Note for iw32

Hi,
Good day guys
Ive the user exit for iw32 for creating the settelment rules. iam getting all values except cost center. Right now we are using Ecc 6.0.
Plz let me know if any sap note for iw32 to get the cost center value.
Regards

Hi,
I tried to find some oss message but there is only one SAP note 1250669 related to your problem. Please check this one.
But looks that i has been published on 09.2008. So it might be in your system already.
Regards,
Lokesh.

SAP Notes for Revaluation

Dear All,
I have some issue related the revaluation. Do you ever know which SAP Notes for revaluation (FAGL_FC_VAL) which is explained that this revaluation cannot be assigned with each original cost object? Do you ever know which SAP Notes for revaluation Joint Venture (GJ91) which is explaned that this program only display the standard and we cannot add some new field in this screen? Please share if you know this notes.
Thanks,
Jones

1. I have some issue related the revaluation. Do you ever know which SAP Notes for revaluation (FAGL_FC_VAL) which is explained that this revaluation cannot be assigned with each original cost object?
https://service.sap.com/sap/support/notes/949971
Please also check the related notes in the above note.

Regarding SAP notes for Budget-2007

Hi all
can anybody tell me the sequence the sap notes for budget 2007
as our client using 4.6 C version of SAP
helpful answer will get awarded
Thanks in Advance

hi Santosh
thanks for reply really valauable answer u have given
actually we r going to implicate the CIN for Budget -2007 and the current pacakge they r using is SAPKIPNG07
could u tell me please how to upgrade the Patch level actually i didn't do any upgrade but i will have to do
please give me the response of this
thanks

How to install ERP 6.0 EHP4

Hi gurus, I want to install a fresh new ERP6.0 system in my company. Since there is EHP4 out in the market then i want to install that version. I have read through the EHP erp 6.0 master guide and relevant document but it's seems to be not clear how to directly install the EHP4. I want to install a Java+Abab system with EP,BI and EPCore.
I've downloaded the Installation Master for 7.01 SR1. I've choose the *Sap ERP 6.0 EHP4 Ready u2013 Support Release 1* to install. But there is no option to Install Dual Stack which is Java+ ABAB at once. The option available is only Abap separately and Java separately which u cant install two instance with the same SID. How do i solve this issue. Is there another way to install the EHP4. If do please guide me through. I'm very confuse.

Hi,
Not necessarily two servers. If it is a development or testing system and if the server has sufficient resources to handle two instances then you can install those separate instances one for ABAP and one for JAVA in single server.
If it is production environment and planning for MSCS, then better to install in separate servers.
Thanks & Regards,
Sharath

Errors in phase MAIN_SHDIMP/SHADOW_IMPORT_INC for upgrade ERP 6.0 EHP4

Hello,
I am executing the upgrade to ERP 6.0 EHP4-Stack4 and in the phase MAIN_SHDIMP/SHADOW_IMPORT_INC, i have the follow error:
"SHADOW IMPORT ERRORS and RETURN CODE in SAPK-40001INCPRXRPM.FSD
2EETW165 Function "/RPM/RELATION_MODIFY (/RPM/CONFIG|15)" does not fit into the existing function group "(/RPM/RELATION_DATA|02)".
Long text:
    Cause
      A function module with LIMU FUNC ... was transported in the transport
      request.
      An import is only possible if this function module belongs to the same
      function group in the target system and
      has the same internal number as in the source system.
      These conditions were not observed in the target system.
      This problem can occur,
      if an entry LIMU FUNC ... is included in a transport request manually
      in the object list editor,
      or if a function module is deleted, and then created again under the
      same name in another function group, and deletion and creation are
      recorded in the same change request.
    System Response
      The function module was not imported.
    What to do
      You can remove the error by making another transport from the source
      system. Transport the affected function groups once more in their
      entirety. To do this, use the transport object R3TR FUGR ... .
      You can avoid the second type of error (deletion and creation in
      another function group) as follows:
      In the ABAP Workbench use the function <LS>Reassign</>, or record the
      deletion and the new creation in separate change requests.
      Release the change request with the deletion before you release the
      change request with the new creation.
1 ETP111 exit code           : "8"
I don't found the function module or function group in the system, this system is the development instance.
Regards, Alberto.

Hi,
I have checked the link before to open my question, but I can't or don't follow the instructions:
1. Ensure Namespace /RPM is modifiable in SE06
2. Call transaction SE37
3.Enter /RPM/RELATION_MODIFY
4.Select Function module-> Other functions-> Rename
5.Rename it to /RPM/RELATION_MODIFY_OLD
6.Release the request if one was created in the process
7.Restart the phase
The Function Module and the Function Group does not exist in our system. And when I can to create the Function Gorup, I have the follow error in the SE80: "Namespace /RMP/ does not exist", and when I try to create the namespace /RPM/ I don't have the "repair license".
I'm using the EHPI Upgrade tools for the EHP4.
Regards, Alberto

KE5Z : UserExit or SAP Note for adding new fields in the report output

Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractal

Hi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!!

SAP NOTE for COMPUTE_BCD_OVERFLOW in include LM60EF0C

Hello friends,
I am getting dump COMPUTE_BCD_OVERFLOW in include LM60EF0C of standard program SAPLM60E.
Error position --> ADD L_PBET-PLNMG TO LV_GESAMT_PLNMG.
The above code is added in sap program in note 671875.
I am not getting any correction note for 671875 note to avoid dump.
Please let me know if you knows any correction note for 671875 note.
Thanks in advance.
Edited by: lovely_yp on Dec 22, 2011 9:20 AM

Hi,
@Srikishan : Correction note 561614 you suggested is for include LM60EFXS,
             But i want correction note for include LM60EF0C.
             SAP system component version --> SAP ECC 6.0
@Siva Kumar: Correction note 671875 is already implemented in program,
             Now I am facing the problem in the code of note 671875.
             Hence i need correction note for the already implemented note 671875.
Thank you.
Edited by: lovely_yp on Dec 23, 2011 7:45 AM
Edited by: lovely_yp on Dec 23, 2011 7:49 AM

Help with SAP notes for SD process please

i m new to Sd,
but for a urgent work, i require help,
can i have SAP NOTES relevant to SD logicistic process like, sales order,
outbound delivery, shipment,
pls pls pls help

hi
Refer to the links below.. can get useful info..
=====================================
SD Process...
PO and SO
SD Process Flow
================================
Shipment
http://help.sap.com/erp2005_ehp_02/helpdata/en/67/a417d443e511d2bf740000e8a7386f/frameset.htm
Shipment Reports
http://help.sap.com/erp2005_ehp_02/helpdata/en/76/22ea8a4c9411d2bf760000e8a7386f/frameset.htm
Creating Shipment Costs documents with work list
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/744121546011d1a7020000e829fd11/frameset.htm
Creating Shipment Costs Online
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/744114546011d1a7020000e829fd11/frameset.htm
Processing the Shipment Cost Document
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/74412e546011d1a7020000e829fd11/frameset.htm
===================
Delivery Processing
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/56078c545a11d1a7020000e829fd11/frameset.htm
PGI
http://help.sap.com/erp2005_ehp_02/helpdata/en/2a/e56de9c1a611d2b68c0000e8359890/frameset.htm
Create Transfer Order
http://help.sap.com/erp2005_ehp_02/helpdata/en/2a/e56de3c1a611d2b68c0000e8359890/frameset.htm
Outbound Delivery Group Processing
http://help.sap.com/erp2005_ehp_02/helpdata/en/4d/fb785614a6412c903fc2f18c100947/frameset.htm
Creating Outbound Delivery
http://help.sap.com/erp2005_ehp_02/helpdata/en/b0/7f2cc829bb11d5bc6e0050da59d79e/frameset.htm
Changing OutBound Delivery
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/56084f545a11d1a7020000e829fd11/frameset.htm
Deleting Outbound Delivery
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/560869545a11d1a7020000e829fd11/frameset.htm
Displaying Outbound Deliveries
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/56085c545a11d1a7020000e829fd11/frameset.htm
Outbound Delivery Group
http://help.sap.com/erp2005_ehp_02/helpdata/en/72/08a3f506924397965af2dfa42c1604/frameset.htm
Changing Outbound Delivery Groups
http://help.sap.com/erp2005_ehp_02/helpdata/en/d9/a223e8265b4c56851ae23b6b36335c/frameset.htm
=====
Sales Order Selection Criteria
http://help.sap.com/erp2005_ehp_02/helpdata/en/04/99590a141511d3b481006094b9b9dd/frameset.htm
========================
Reward if USeful
Thanx & regrads.
Naren..

SAP Notes for BI7

Hi BI Experts
Can you please send me the SAP Notes no.s for BI7 which help me for certification exam?
I have knowledge of Bw 3.x.
Thanks

Hi Krishna,
Really thanks for your instructions. We have enabled hte "refresh on individual workbooks" in the workbook settings tab adn we are able to see the same in the context menu of the analysis grid.
Again i have few doubts.
I can able to see two options as below.
1. Refresh
2. Refresh this query.
What is the difference between this two?. Also when i click the "refresh this query" it shud display the "selections screen of the particular query", But it is not at all showing me a selection screen,
What i am doing is.. I am simply doing "refresh this query" option that will refresh my screen first adn i am doing change variables.
That will give me the selection screen of the particular query. If i am not doing so, all workbooks are refreshing,
Please advice, whether selection screen of the particular query can be shown when clicking "refresh this query".
Thanks/

SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1

Similar Messages

Maybe you are looking for