SAP NOTES QUERY

Hi ,
can anyone help me with the problem i am facing.
Sap Note No. : 951764
When the Note is applied to Object BAPI_XBP_JOB_SPOOLLIST_READ_20, a syntax error is generated.
Technically, a fields "plain" is not defined in the function module import parameters.
And in Correction instructions of the SAP Note, there is no mention for the same.
Also,
Explain the concept of sap notes.
Its urgent
answers will be rewarded.

Hi
To check the SAP Notes you need to have the OSS User Id to logon.
Goto www.service.sap.com-> SAP Support Portal--> Enter your OSS User ID
Search for required SAP Note. And open the Note.
The SAP Note describes you the how to modify the program,.
First check the Componet information from your SAP system.. Goto> system> status---> Component Information.
Then for each Component (SAP_APPL -- 470, 500, 600....)there will be different modification.
Now choose your Component and replace the code from SAP Note Correction instructions to your SAP Syatem.
Thanks & Regards,
Dileep .C

Similar Messages

Implementing SAP Note query

Hello,
My query is , i need to implement SAP Note 1232490. The highest support package applied in my system is SAPKB46C55.
This note is part of support pack SAPKB46C59. Can i apply this note now directly or should i apply SAPKB46C56,SAPKB46C57,SAPKB46C58,SAPKB46C59 ?
If i apply directly,what about if any dependencies exist for that ?how to check the dependencies ?
Our SAP Version -- 4.6C
Regards,
Chaitanya.

i have one more query.
for SAP Note : 1449574
it is written Valid Releases SAP_APPL 46C to higher releases.
But it is also written in SAP note that, this note comes as part of support pack for minimum 500 release.
can i apply this in R/3 4.6C ??
please go through the note pdf and please clear my doubt.
Regards,
Chaitanya.

SuPM - Data from SAP BW Query(Automatic) and Manual not displayed in KPI

Dear Forum,
I am also, currently working on a project implementing BO SuPM Version 1.0. Landscape is ECC -> BI -> SuPM dashboards.
I have created a KPI in SuPM dashboard.
Case 1 : Automatic data collection - This KPI is marked for Automatic data collection. So, maintained Scripts with Connectivity and SAP BW Query name. I save this KPI and include in a new report and Run it. There are no records displayed.
Case 2: Manual data collection - This KPI is marked for manual data collection. So, maintained values in SuPM portal itself. I save this KPI and include in a new report and Run it. There are no records displayed.
Could you please help me how KPI in SuPM be filled manually and automatically ( from BW Query)?
Thanks,
Best Regards
PhaniRaj

Dear Phani,
First of All, you should have a framework created and assign the Core KPI to that framework and specify the frequency of the framework (Say Monthly) and Activate it.
Upon Activation, if it is a Manual Data Collection, then you should perform Role Assignment ie specifyinfwho would be the Business Contributor & Approver for ur Manual KPI.
After this, you have to run this program [/SRCORE/DATAREQUEST] in SE38 in the backend system which wil create a data request,
Later you should login as Business Contributor and go to MY Data Requests and then provide the data for the Month specified. Then login as Approver and under Approvals option, you should Approve the data. Now, you should go to SuPM application and select that Month in the dimension and KPI and then RUN the Report.
For Automated Data Collection, you should have to initially creata a Query (SAP/ BW) and specify the name of the query in SPRO--> Sustainability Performance Management --> Automated Data Collection --> Maintain Queries (SAP/ BW) --> Specify that Query name and the Connector ID (SM59).
Now go for KPI creation and specify the Query name in the KPI and then Assign the KPI to the framework and activate it.
Upon Activation, You should RUN the program /SRCORE/AUTO_DATA_COLLECT. Now, select this KPI in the report and RUN the report.
If you perform these actions, you will get the values in the report.
It can be checked in the backend application, either by checking the Process chain[RSPC] or by checking the Infocube if the data is loaded into the Infocube or not.
Let me know if you face any problems...
Regards,
Raghu

SAP ABAP Query not generated after upgrade

Hi All,
Our client has upgraded from 4.6c to ECC 6.0
In the upgraded server some SAP Queries have not been generatedand others have generated. I wanted to know why all are not generated.
I also wanted to know if any table name exists which maintains query with generated program name
Please let me know your learnings on SAP/ABAP Query if any
Thanks in advance

I forgot to mention that FM will just give u the report name..wont generate it.
I dont think the report name is saved in any tables... it is generated ...
but u can derive the report name..if u know the user group and query name.. by concatenating those ..
for details..look into the code for that FM

Can not build a Universe based on a SAP/BW Query:

Hi,
In Universe Designer I can not build a Universe based on a SAP/BW Query:
-The Universe Items -> Sight -> Universe Window and -> Sight -> Liste Mode are greyed our
- Its simply not possible to move Universe "Objects" = "Classes" into the Table, Join or
Item Plane.
I am useing:
-BO XI 3.1
-BO Solutions for SAP Integration
-Universe Designer
Universe Designer based on a Database is ok
The Connection to the SAP System is stored in BO XI 3.1
What's missing ?
Any Rights/Authorizations are Misseing ?
Thanks a lot !
Martin

Hi
when working with OLAP universes (eg. universes based on SAP BW queries) it is not possible to work as you normally do when you have a universe based on a relational data source. The data madel is the one from the OLAP source (cube) so it is not possible to create your on joins, tables etc. In this case you can only add/modify the objects in the object browser (left panel).
Regards,
Stratos
PS: The Data Federator will allo you to create relational universes on an SAP BW source. Still this is a product that must be licensed seperately and currently does not support SAP logon ticket-based SSO.

Query About Sap Notes

Hi,
I want to know where can I get more indformation about SAP notes.
e.g. We have a sap note no. 'note 871787' , for a newly piece of code added to a standard function module.
Where can i get motre information about this note .

Hi
To check the SAP Notes you need to have the OSS User Id to logon.
Goto www.service.sap.com-> SAP Support Portal--> Enter your OSS User ID
Search for required SAP Note. And open the Note.
The SAP Note describes you the how to modify the program,.
First check the Componet information from your SAP system.. Goto> system> status---> Component Information.
Then for each Component (SAP_APPL -- 470, 500, 600....)there will be different modification.
Now choose your Component and replace the code from SAP Note Correction instructions to your SAP Syatem.
Thanks & Regards,
Dileep .C

Start SAP BW Query Designer button in Crystall Report is not find

Hi all
I installed Crystal Report 2008 SP1 and Integration Kit for SAP 3.1
After Integration Kit installed, I see in SAP Menu have Start SAP BW Query Designer button
But, when I update to Crystal Report SP2, I dont find Start SAP BW Query Designer button in SAP Menu
Can I help me enable Start SAP BW Query Designer button
Thanks

Hi,
the query designer can be started from the SAP BusinessExplorer menu items. the button has been removed from Crystal Reports
Ingo

Prompt List of Values in WebI - SAP BI Variable - SAP BI Query -BI Infoset

Hi,
We have a Multiprovider built on an Infoset. SAP BI Infoset is built using 2 DSOs.
There is a SAP BI Query on top of this Multiprovider.
Multiple-Single Values type Optional Variables are created for some of the Objects of this SAP BI Query.
Universe is created on top of this SAP BI Query, using SAP Integration kit.
WebI is created on top of this Universe.
Prompts are created on some of the Universe Objects, for the WebI report.
We are facing a typical problem.
When a WebI prompt is created on one particular object, (which also has a Multiple Single Value type Optional Variable in SAP BI Query), its List of Values is showing up only first three values in WebI. The SAP BI Variable in BEX Analyzer shows up all the 8 values for the List of Values, for the same object.
The Output WebI report has more values for the object than shown up in the List of Values & this is the problem.
We tried to keep the settings in Info-object, DSO, Infoset, Multiprovider = Values in Master Data (for the List of Values).
Similar objects and similar variables for the same query / webi show all the List of Values.
Any guidance on aspects to be checked would be helpful.
regards,
Rajesh K Sarin

Problem :
If an SAP BI Infoset is used in data modelling, and a restricted key
figure is created in the SAP BI Query; the resultant WebI Object Prompt
for the Info-object, only shows up LOVs which have been used for the
restricted Key Figure. Both the things are not related except for the
fact that some of the values for the same object are used for the
restricted key figure.
Details :
We have a Multiprovider built on an SAP BI Infoset.
SAP BI Infoset is built using 2 DSOs.
There is a SAP BI Query on top of this Multiprovider.
There is a restricted key figure in the sap bi query. KeyFigure "Number
of Records" is restricted for 3 of the relevant Info-object "Meter
Reading Status" values.
Universe is created on top of this SAP BI Query, using SAP Integration
kit. WebI is created on top of this Universe.
Prompt is created on the Universe Object for Meter Reading Status, in
the WebI report.
List of Values is showing up only the three values in WebI (which were
used in the Restricted Key Figure calculation).
SAP BI Variable in BEX Analyzer for the same Info-object Meter Reading
Status shows up all the 8 values for the List of Values.
The Output WebI report has more values for the object than shown up in
the List of Values & this is the problem.
We have kept the settings in Info-object, DSO, Infoset,
Multiprovider, Query = Values in Master Data (for the List of Values).
When we delete the "Restricted Key Figure" from the SAP BI Query, the
refreshed Universe and Webi have a complete set of List of Values
applicable.
Steps for Reconstruction
1. Create Infoset
2. Create SAP BI Query on Infoset
3. Create Restricted Key Figure for Number of Records and few of the
values for a characteristic info-object "X".
4. Create BO Universe on SAP BI Query
5. Create Webi on BO Universe
6. Create a Prompt on the characteristic info-object "X".
7. Check List of Values for the characteristic info-object "X" in SAP
BI Query and WebI.
8. LOVs in WebI are equal to the values used for restriction in the
restricted key figure.
9. Delete the restricted key figure from SAP BI Query.
10. Refresh Universe
11. Webi prompt shows all the values for the prompt on "X".

Performance Issue with Webi report uses SAP BI Query as the data source

Hello.
I have created a Webi ad-hoc report which connects to a SAP BI query through BO OLAP universe.
The layout of Webi is the exactly the same as the BI query. There are filters in the Webi to restrict the number of data extraction, but even with data result of 5000 rows, it took about 30 seconds.
If I execute the BI query with the same filter restriction, it tooks less than 10 seconds.
It seems that large percentage of time is consumed at the MDX part.
Is there any tuning method that could speed up the process time of MDX?
Thank you.
Justine
Edited by: Justine Liu on Mar 18, 2009 6:59 AM

Hi,
please take a look here:
[https://service.sap.com/sap/support/notes/1142664] (Look under related notes)
It includes references to various performance improvements of the MDX interface. From what I saw there it is advisable to upgrade your SAP BI (7.0) up to at least Support Package 21 (you are currently on SP 15).
This may also be interesting for you: There is a new Fix Pack 1.4 coming out for BOBJ XI 3.1. Combined with the related SAP Enh.Pack (not sure about the version of this one) should also improve WebI performance. This fix pack is not yet officially released though but it should not take look.
I recommend that you try the upgrade to Support Package 21 first.
BTW it is also advisable to take a look in the results of your MDX query (e.g using the MDXTEST transaction). You should make sure that your query is indeed restricted as expected. Sometimes the results you see in SAP native reporting tools (e.g. BEx Analyzer) differ from those returned from the MDX component, depending on the way variables/restrictions where defined in the query designer. It is all about making sure that there is no apples/oranges comparison here.
Regards,
Stratos

Webi Report Against SAP BW Query Fails When Scheduled

Hi all,
I'm facin a problem with all my Web intelligence Reports. When i refresh them on demand from view or design mode, everything works fine, but when i schedule them all instances fails with this error:
A database error occured. The database error text is: The MDX query SELECT { [Measures].[DF4LK70NQJ0KRU6XHODIE9TGA], [Measures].[3EG3OC7QZBODSE9J2JI4OLOPI], [Measures].[CXDGYOWE9FJFHS72KIO78WGTT], [Measures].[12C28AI1LLXSDEHMWCDUMJWCW], [Measures].[E2OE5J39YBUPP4IPZCX1HNHZX], [Measures].[5X2TIT4FSFEBHYFDEFACO2DCF], [Measures].[E6WGO3AACYBZ20ZIHZF28Y9TT], [Measures].[CB1PAR1H2KF21CWAY6G3NP2WK], [Measures].[8GZAGANUUZA7B2V59A5FBB5BO] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZSOLTYPE].[LEVEL01].MEMBERS, [0CALMONTH].[LEVEL01].MEMBERS ), [0MATL_GROUP].[LEVEL01].MEMBERS ), [0MATERIAL__0MATL_TYPE].[LEVEL01].MEMBERS ), [0COMPL_DEL].[LEVEL01].MEMBERS ), [0BBP_STATUS].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ) ON ROWS FROM [CUBE_NAME/QUERY_NAME] SAP VARIABLES [ENTFINAL] INCLUDING X [0I_CALZ2] INCLUDING ENE 2008 : MAR 2008 failed to execute with the error FUNCTION_NOT_FOUND. (WIS 10901) .
BO is XI3.0, BW 3.5, Universe made from a SAP BW Query.
Thanks in advance!

Hi Ingo,
All the authorizations for crystal report to fetch data is in place, and crystal report refresh and schedule runs success fully. The issue is only in Web Intelligence.
If it is same as crystal report we should see similar results for crystal report, which is not the case as of now. Crystal report refreshes without any error and we can able to schedule it without any problem.
As it is said earlier, SAP secuirty guy doesnt find any missing authorizations. It is very difficult to say which authorization is missing.
Edited by: Raghavendra Barekere on Nov 7, 2008 6:42 PM

Crystal Report Missing SAP InfoSet, SAP BW Query Connector

Hi,
I have installed SAP GUI for Windows 7.2 (Compilation 2) and Crystal Report 2008 SP2 then following by installed SAP Integration Kits 3.1 SP3 on my workstation. However, when i launch my Crystal Report designer, it do shows SAP toolbar however when i click on one of the icon (eg: Setting) the entire CR will hung and prompt me error and exit automatically.
Beside that, i could not find any connector for SAP (Eg: SAP InfoSet, SAP BW Query and etc) when i create a new blank report by click on the New Connection.
Appreciated anyone know this could assist on this.
Thank You.
Regards,
CK

Hi Ingo,
Thanks for your prompt reply. I will sort it out and ensure the release version will be the same as Inter Kits.
By the way, i saw your post regarding the Integration Kits installation and configuration. However, i still need some clarification; appreciated you could assist me on this.
I have installed SAP BOXI3.1 SP3 on an LINUX machine (Redhat Enterprise 5) and the server was running fine without connecting to BW or SAP eCIBS.
Now, i have to establish the connectivity to BW (InfoCuve and BW Query) and SAP eCIBS system. As my customer requirement was required to using WEBI, CR and Xcelsius for connecting to BW for getting the data and then using scheduler in BOE for performing report distribution. Some of the report will connecting to SAP eCIBS directly and that will using our Client's machine for creating the report (using CR2008) and then publish to the BOE platform for report scheduling and distribution.
My question, i wish to install SAP Inter Kits and downloaded Inter. Kits for SAP Solution 3.1 SP3 from service market place. When i refer to the document from help.sap.com; there are couple of section but i wish to know which are the perquisite section that i wish to install and configure?
Eg: System Requirement which are installing SAP RFC SDK and SAP JCO SDK into my BOE server, then following my create a logon token. How to to that? It also require to install SAP Java Connector and SAP GUI, does these two available for LINUX OS as well?
The steps in doc was confuse, appreciated your kind help.
THanks.
Regards,
CK.

Crystal Report and SAP BW Query

I have developed the Crsytal Report (ontop of SAP BW Query), and save this report into my local c:\ drive.
Now I made some changes to the BW Query (this is the Datasource of my Crystal Report) to include new Key Figure and Characteristic via BEx Query Designer.
Now when I open my existing Crystal Report, I dont get see the new key Figure/Characteristics that I just included to the BEx Query. Why? Is this bug? How can we update the Crystal Report automatically when the underline BEx Query has changed?

Hi,
We have similar case when the underline BEx query has been changed.
In our case, the Variable value is not appear in CR.
Example, a Variable has been created and assigned to the Cost Centre.
In BEx Query, I can see the value of the Cost Centre and can therefore select the value from the Variable field.
In CR, I have the Cost Centre prompt as parameters, but there is no value for me to select.
Database Verify has been performed.
Anyone come across this?

How to remove Decimals in Quantity Objects in SAP BO Explorer View created on top SAP Bex Query?

Hi,
I created SAP BO Explorer report on top of SAP BEx Query.
In SAP BEx Query, Decimals were hided but when i created OLAP Universe on top that SAP BEx Query and Created Index on top of Information Space in SAP BO Explorer and then created Exploration Views. But i'm getting Decimals in my Exploration Views where as SAP BEx Query in RSRT, no decimals were appearing.
Can anyone suggest me how to remove decimals in SAP BO Exploration Views.

Hi Ramana,
I am not use how you connect to SAP BEx query (Via universe or BWA or HANA)
What I could say is BWA and HANA, you cannot adjust this
For universe, you could try in universe layer, there is note about this
For BWA and HANA, this function might be enhanced but you 'd better raise OSS to SAP to check with them
Best regards
Alex yang

Unable to use SSO with universe connection on top of SAP BW query

Hi,
We're creating a universe on top of a SAP BW query by using universe designer.
We logon to universe designer by using SAP credential.
When creating the connection, we set the option "Use Single Sign On when refreshing reports at view time" in order to logon to BW server. But when clicking next, an error arises:
"DBD: Unable to connect to SAP BW server Incomplete logon data"
The strange thing on this is that there is one laptop which is able to set up this kind of connection, while all other workstations are not able to set it because they recieve that error (we all work against the same BO server). So this looks like an installation issue.
We reinstalled SAP Integration Solutions on those workstations, but problem is still the same.
I found thread: Universe Connection Authentication on SAP BW which talks about the same issue, but solution involves uninstalling Xcelsius. But we do need Xcelsius!
Any suggestions?
Thanks,
David.

>
Ingo Hilgefort wrote:
> Hi,
>
> - how did you enter the SAP credentials when logging on ?
username/password with sap authentication
>
> - are you using a application server or a message server for the connection ?
Application server
>
> - SAP GUI is installed ?
SAP GUI 710 patch 11
>
> - SAP Integration Kit is installed ? is it a full keycode or a temp keycode ?
SAP Integration Solutions with temp keycode
>
>
> thanks
> Ingo

Getting error while running crystal reports on SAP BW Query

Hi
I have installed Crystal Reports 2008 SP3 and then SAP Integration Kit. I'm able to connect to SAP BW but after adding the query to crystal and while refreshing the report i'm getting an error
Database Connection Error: 'BAPI Error #:0' Error occured when starting the parser: timeout during allocate/CPIC-CALL:'ThSAPCMRCV'.
Please help how to overcome this error.
Thanks
Raghavendra.G

Check the following SAP note
https://service.sap.com/sap/support/notes/1032461
Regards,
Stratos

SAP NOTES QUERY

Similar Messages

Maybe you are looking for