SAP - Novell IDM Connector

We are implementing a Novell IDM LDAP connector to interface with SAP HR systems. We are passing PA fields across via IDOC's. A routine (Novell side) creates a new User ID & E-Mail Address to be passed back to populate IT0105. We get the error message -
"MESSAGE_TYPE_X - Nested call of PERFORM ON COMMIT: NESTED_PERFORM_ON_COMMIT caller: SAPLB
UBA_4 program: SAPLBUBA_4 form: GENERAL_BADI_CALL"
This happens when using IT0105 subtypes '0001' User ID & '0010' E-Mail Address. However, when we pass back only E-Mail address and use a different 'MAIL' we do not get the error.
Regards,
Martin

AFAIK there is no direct provisioning from IdM 7.2 to BO. In my current project the BO access rights are delivered via AD groups. BI is just an ABAP system.
It was possible to map the BO access rights agains BI-privileges. But AD was chosen as that enabled SSO-login to BO.
Your BO/BI/authorization-folks should know how the mapping of access rights works.
regards, Tero

Similar Messages

SAP IDM Connector list

Hi there!
So I was looking at the most recent version of the SAP IDM Connector List, and I don't see BI or BOBJ. Can anyone provide best practices information on connecting / working with these systems? We are considering leveraging AD for Authentication and Authorization.
Please advise.
Thanks,
Matt

AFAIK there is no direct provisioning from IdM 7.2 to BO. In my current project the BO access rights are delivered via AD groups. BI is just an ABAP system.
It was possible to map the BO access rights agains BI-privileges. But AD was chosen as that enabled SSO-login to BO.
Your BO/BI/authorization-folks should know how the mapping of access rights works.
regards, Tero

How do we Integratet SAP to Non-SAP Using Business Connector

Hi Experts,
I am new to SAP Business Connector !!
and what are the Forms ? for SAP Business Connector Related Postings ??
!! I have a requirement to integrate sap to non-sap with Business Connector !!
We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
For Eg. like in R/3 SD to FICO and MM Integration.
Please Give your Valuable Suggests..
Thanks .
Upender.

Hi,
It is not an issue, It will be a separate project :-).
The right forums for this,
Expert Forums » SAP NetWeaver » Process Integration
www.wmusers.com
Also go through the following links:
http://www.sapgenie.com/interfaces/businessconnector.htm
http://www.sapgenie.com/mysap/bus_connector.htm
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
https://websmp104.sap-ag.de/connectors
Thanks and Regards,
Chandra Madapati

OIM - SAP Employee Recon and SAP User Management Connectors vs. OC4J

In reading through the SAP connector documentation I've found that we cannot use OC4J to run OIM if the 9.0.3 SAP User Management Connector or SAP Employee Recon Connector is used. This is all related to a conflict in JDK versions supported between the SAP JCo (Java Connector) library and OC4J. A thought we've had is to use a Remote Manager for these connectors. Can anyone validate this approach? Is it possible to use a different JDK version with your remote manager? Is there another workaround that anyone is aware of?
Thanks

Hi,
The remote manager should work with different JDKs. We are going to be doing the same thing for one of our adapters.
As for SAP, I cannot think of another workaround -- we actually abandoned the SAP JCo approach and are doing web services with XI.
Thanks,
Deborah
http://www.linkedin.com/in/dvolk

Need Standard BAPI To Create Opportunity in SAP Using Java Connector.

Hi All,
What is the standard BAPI to create an opportunity in SAP CRM through Java Connector.
Please share code if available for doing same. I have found BAPI_OPPORTUNITY_CREATE_MULTI .
How to create opportunity in SAP through java connector using BAPI_OPPORTUNITY_CREATE_MULTI .

Hi,
I think you can search for it or you can create a thread at ABAP section.

SAP PLM DMS Connector - Read Only

I've a very simple question.
Using SAP PLM DMS Connector can I upload documnents into repositories configured for DMS?
I read the documentation and it looks like a read only connector.
Thanks and Regards,
Prasanna Krishnamurthy

Hi,
It is a read only connector, confirmed by SAP.
Cheers,
Tuval

SAP CRM Groupware Connector for Exchange on 64 Bit platform

Hi All,
We have successfully installed SAP CRM 5.0 on Windows 2003 x64 Server R2 SP2.
OS, Database and SAP Kernel are all 64 Bit enabled.
Now we are trying to install SAP CRM Groupware Connector on the same server.
But we encounter problems with SAP Groupware Connector 2.1 for MS Exchange installer (setup.exe), which stops with the following error:
Required Software missing:
- MS SOAP Toolkit
Installation cannot be continued !
But SOAP Toolkit 3.0 definitely is installed.
Obviously the Groupware Connector is still 32 Bit.
It is the only available download in SAP Marketplace i could find.
The CD is located in the same area where the CRM installation CDs can be downloaded.
SAP does not differ between 32 Bit and 64 Bit versions.
I'm wondering if it is possible, to run a 32 Bit Groupware Connector in a 64 Bit environment.
Does anybody have experience with such a configuration ?
Or is there a 64 Bit enabled version available for download ? Where can i find this version ?
Thank you in advance.

I got an answer from SAP Support:
SAP still recommends to use 32-bit system OS in order to avoid any future confusions.
So we have to install another 32 Bit Server only for the Groupware Connector.
Thx for your interest.

Unable to run SAP HANA Cloud Connector on windows 8.1

Hi Experts,
I am trying to run SAP HANA Cloud Connector on Windows 8.1 machine , i could see the go.bat command response as below:
But when i run https://localhost:8443 URL in a browser, i don't see any response. Just a blank screen.
By looking at the logs:
#ERROR#com.sap.scc.jni#Start Level Event Dispatcher# #Cannot load the Cloud Connector native library. (exception java.lang.UnsatisfiedLinkError: no sapscc20jni in java.library.path)
As per this reference https://help.hana.ondemand.com/help/frameset.htm?204aaad4270245f3baa0c57c8ab1dd60.htmlInstallation on Microsoft Windows OS it doesn't talk anything about support of HCC on Windows 8.1, just wondering if above error is because of it.
For more details, PFA log files.
Regards,
JK

As a workaround have tried copying sapscc20jni.dll file from auditor folder at sapcc-2.4.0-windows-x64 into Windows\System32 and it worked like a charm
Thanks Virinchy P
Regards,
JK

Wanted 'Using Sap Adapter for Connector Framework' document

dear friends
I want to display ABAP reports in iView without Transaction iView.
From the below forum link
/community [original link is broken]
i came to know i can get the help from 'Using Sap Adapter for Connector Framework' document, but the link is giving
404
The requested resource is not available.
can anybody help me to find out the document
thanx in advance
please reply me at the earliest.
kantha

have a look here - should help:
http://help.sap.com/saphelp_nw04s/helpdata/en/f2/db49421c0b3c54e10000000a1550b0/frameset.htm
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/f2/db49421c0b3c54e10000000a1550b0/frameset.htm">sap help portal</a>
you may also download PDK, there are some samples in it.
Best Oliver

OIM - SAP Employee Reconciliation Connector - Dates Mapping

Hi Everyone,
I am beginning to work in OIM11gR2 and the SAP Employee Reconciliation Connector 9.1.2. I have some specific questions that I haven't been able to find in the connector documentation.
Basically the questions I have are related to the mapping of the Dates, assuming I have the Reconciliation of Effective-Dated Events configured:
When there is a HireEvent registered in SAP and reconciled into OIM, in what OIM fields are the Start and End Date stored?
When there is a TerminateEvent registered in SAP and reconciled into OIM, in what OIM fields are the Start and End Date stored?
When there is a RehireEvent registered in SAP and reconciled into OIM, in what OIM fields are the Start and End Date stored?
Has anyone worked with this connector?
Thanks in advance!
Regards,
Camila

Hi Everyone,
I am beginning to work in OIM11gR2 and the SAP Employee Reconciliation Connector 9.1.2. I have some specific questions that I haven't been able to find in the connector documentation.
Basically the questions I have are related to the mapping of the Dates, assuming I have the Reconciliation of Effective-Dated Events configured:
When there is a HireEvent registered in SAP and reconciled into OIM, in what OIM fields are the Start and End Date stored?
When there is a TerminateEvent registered in SAP and reconciled into OIM, in what OIM fields are the Start and End Date stored?
When there is a RehireEvent registered in SAP and reconciled into OIM, in what OIM fields are the Start and End Date stored?
Has anyone worked with this connector?
Thanks in advance!
Regards,
Camila

Configuring SAP HANA Cloud Connector with trial account

The free developer license includes the use of cloud connector. (message from SAP)
When I try to set up the Initial configuration of the SAP HANA Cloud Connector as described in the SAP How-To Guide (Version 1.0, March 2013 and Technical Documentation SAP HANA Cloud, Document Version: 1.6.0 - 2013-06-18 ) I get the the message
"Connection to https://connectivityconfig.hanatrial.ondemand.com:443 refused"
Configuration Data of Cloud Connector Connector
Landscape Host:        hanatrial.ondemand.com
Account Name:         s<user>trial
User Name:               s<user>
Password:                 ...
Do I have to observe further settings?

Hi Markus,
I'm getting same error Connect_failed . I check with my network & basis guys There are no firewall blocking ports . Is this problem with hantrail account or what could it be? Please guide .
Thanks,
Vidya

SAP HANA Cloud Connector Login Issue

Hi Everyone,
Until recently my SAP HANA Cloud Connector Login was working fine. Now, when I try to login, I get the below error:
Please let me know what could be the issue here.
Regards,
Lipsa

Hi,
I recommend to place this question under SAP HANA Cloud Platform Developer Center
Regards,
Ifat.

Support for SONiC SAP Office Notification Connector

Hi there,
we may be looking to implement SAP Office Notification Connector
(SONiC) to our portal system (NW7 ehp 1).
I can see that the connector is valid for NW 2004s, so should be
supported for our version of the portal?
Also wondered if this is a fully SAP-supported connector and if there
are any other support implications eg conditions on versions of portal,
business packages, backend systems etc?
Many thanks for your help

Hi Nicholas,
The official stance on the SoNiC connector is located in note number: 945484. Please have a look because support is not valid on the release you are using. The note specifically states the following:
This connector is not supported by SAP for the mentioned releases in the
note validity. (Note validity shows the following: Not supported for:
UWLJWF 700, 701, 710, 711)
"There is no support if any problems or side effects
appear from this connector. Usage of the connector is only on your own
risk in unsupported releases.
The connector is part of the standard delivered software and it is
supported by SAP in upper releases."
So in other words, versions lower than 702 and 720 do not contain the connector, and the customer can implement this at their own risk, but it really shouldn't be used for productive use. In the newer versions this connector comes as standard implementation with the UWL. I hope that this is helpful to you.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

ALE:SAP to non-SAP using Bussines connector

Hi
The business connector has been set up. I've created two logical systems.
Transaction SALE
LS: DEVCLNT500 Assigned LS: DEVCLNT500 to SAP client 500
LS: DEVCLNT900
Defined RFC Target system: DEVCLNT900 connection type 'T'
Program id SAPBC
Created a distribution model view DEVCLNT900
Added message type :MATMAS
Model View: DEVCLNT900
Sender    : DEVCLNT500
Receiver : DEVCLNT900
Generated the profile without errors.
But when i tried to distribute it to DEVCLNT900,
i got a communication error <b>" Communication error occurred Unknown Partner and Message Type. Sender: DEV500 Receiver: DEVCLNT900 MsgType: M"</b>
What could be the cause.

Ravi
It seems to me based on the info that i received from the basis adminastrator that i need to create something in BC.
com.wm.app.b2b.server.ServiceException: Unknown Partner and Message Type. Sender: DEV500 Receiver: DEVCLNT900 MsgType: MODEL_VIEW_REPLICATE
     at wm.PartnerMgr.gateway.runtime.InboundProcess(runtime.java:388)
     at pub.sap.transport.RFC.InboundProcess(RFC.java:190)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:466)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:495)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:464)
     at com.wm.pkg.sap.rfc.Listener.handleRequest(Listener.java:286)
     at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:6022)
     at com.sap.mw.idoc.jco.JCoIDoc$Server.dispatchRequest(JCoIDoc.java:10120)
     at com.wm.pkg.sap.rfc.Listener.dispatchRequest(Listener.java:186)
     at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method)
     at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(MiddlewareRFC.java:1070)
     at com.sap.mw.jco.JCO$Server.listen(JCO.java:5797)
     at com.sap.mw.jco.JCO$Server.run(JCO.java:5731)
     at com.wm.pkg.sap.rfc.Listener.run(Listener.java:101)
     at java.lang.Thread.run(Thread.java:479

Crystal Report Missing SAP InfoSet, SAP BW Query Connector

Hi,
I have installed SAP GUI for Windows 7.2 (Compilation 2) and Crystal Report 2008 SP2 then following by installed SAP Integration Kits 3.1 SP3 on my workstation. However, when i launch my Crystal Report designer, it do shows SAP toolbar however when i click on one of the icon (eg: Setting) the entire CR will hung and prompt me error and exit automatically.
Beside that, i could not find any connector for SAP (Eg: SAP InfoSet, SAP BW Query and etc) when i create a new blank report by click on the New Connection.
Appreciated anyone know this could assist on this.
Thank You.
Regards,
CK

Hi Ingo,
Thanks for your prompt reply. I will sort it out and ensure the release version will be the same as Inter Kits.
By the way, i saw your post regarding the Integration Kits installation and configuration. However, i still need some clarification; appreciated you could assist me on this.
I have installed SAP BOXI3.1 SP3 on an LINUX machine (Redhat Enterprise 5) and the server was running fine without connecting to BW or SAP eCIBS.
Now, i have to establish the connectivity to BW (InfoCuve and BW Query) and SAP eCIBS system. As my customer requirement was required to using WEBI, CR and Xcelsius for connecting to BW for getting the data and then using scheduler in BOE for performing report distribution. Some of the report will connecting to SAP eCIBS directly and that will using our Client's machine for creating the report (using CR2008) and then publish to the BOE platform for report scheduling and distribution.
My question, i wish to install SAP Inter Kits and downloaded Inter. Kits for SAP Solution 3.1 SP3 from service market place. When i refer to the document from help.sap.com; there are couple of section but i wish to know which are the perquisite section that i wish to install and configure?
Eg: System Requirement which are installing SAP RFC SDK and SAP JCO SDK into my BOE server, then following my create a logon token. How to to that? It also require to install SAP Java Connector and SAP GUI, does these two available for LINUX OS as well?
The steps in doc was confuse, appreciated your kind help.
THanks.
Regards,
CK.

SAP - Novell IDM Connector

Similar Messages

Maybe you are looking for