SAP NW BRM and JSR 94 support?

Hello,
Can someone please provide some insight on SAP NW BRM's plan to support JSR 94?
I believe the support does not exist in SAP NW BRM 2007 (NW ver 2004s)
Thanks,
Nitin

Arti, this was quite an open question, I'm aware. Thanks for replying though.
We would like to offer Business Users (probably BPXs) the ability to modify rules. For example, approval amount for PO.
BRM seems the most likely candidate in this respect, especially since we use BPM heavily. But of course we use ERP  functionality (with its customizing) as well.
We see an overlap in BRM decision tables and ERP Customizing Tables ("steering" tables, also Masterdata, non-transportable data). A lot of decisions / checks require the same data, but we don't want to maintain this both in ERP and BRM.
Any ideas on this?

Similar Messages

  • Support of JSR 168 and JSR 286 portlets

    Hi,
    As far as I know there is no direct support for JSR 168 compliant portlets in the SAP portal. Remote portlets can be consumed using WSRP. I was wondering whether the SAP portal will provide direct support for JSR 168 or even JSR 286 portlets in future releases?
    Regards,
    Kevin

    Hi Kevin,
    Long time ago SAP promised to implement JSR 168. Nowadays, you don't find much official documentation stating SAP portal is JSR168 compliant.
    SAP introduced the Federated Portal Network (Consumer and Producer portals), also with WSRP support.
    Check:
    cheers,
    Noë

  • SAP Enterpirse Portal Development standards (JSR 168 and JSR 286)

    Hi
    I am working on SAP Entperprise Portal Assessment. I  heard SAP-EP not supporting JSR 168 and JSR 286 standards.
    Can anyone please let me know what JSR 186  and  JSR 286 standards are and impact in SAP development work.
    Thanks everyone.

    Hi Ravi,
    SAP EP is definitely not supporting JSR 168.
    The next release (Portal on NetWeaver 7.1) will support JSR 286.
    You have to consider that the huge amount of SAPs standard portlets / iViews (addressing Knowledge Management, Employee Self Service, Business Intelligence, etc.) will not be implementations of JSR 286 but so called portal applications or Web Dynpro applications.
    HTH,
    Carsten

  • SAP Bunisess Connector 4.8 -Can support SAP 4.6C and ECC6 at the same time

    Hi All,
    I am upgrading Busniess Connector 4.0 to 4.8 .
    I have sap 4.6C systems and ECC6 systems in Landscape.Will Business Connector 4.8 support both (SAP 4.6C and ECC6) simultaneously ?

    Hello gaurav,
    I have tried re-installing.
    I am able to open the web-admin and also all the links except the ones in the adapters section.
    I have checked the installation document, adapter guide for BC 4.8 but i couldnt find anything useful.
    I was just wondering if it has got anything to do with the OS.
    lemme know if you have come across anything like this.
    thanks for the help.
    Sreejith

  • OIM - SAP Employee Recon and SAP User Management Connectors vs. OC4J

    In reading through the SAP connector documentation I've found that we cannot use OC4J to run OIM if the 9.0.3 SAP User Management Connector or SAP Employee Recon Connector is used. This is all related to a conflict in JDK versions supported between the SAP JCo (Java Connector) library and OC4J. A thought we've had is to use a Remote Manager for these connectors. Can anyone validate this approach? Is it possible to use a different JDK version with your remote manager? Is there another workaround that anyone is aware of?
    Thanks

    Hi,
    The remote manager should work with different JDKs. We are going to be doing the same thing for one of our adapters.
    As for SAP, I cannot think of another workaround -- we actually abandoned the SAP JCo approach and are doing web services with XI.
    Thanks,
    Deborah
    http://www.linkedin.com/in/dvolk

  • SAP  6.00   and  Adobe Acrobat Reader 9

    Hi   gurus,
    Can someone know why SAP 6.0  and Adobe Acrobat Reader 9 was not compatible ?
    Thanks a lot
    Soufiene

    Hi Soufiene,
    The last homologated version by SAP was 8.2. There are already some people using v9 and working fine, but I cannot assure support on any issue on it.
    You should refer to PAM (product matrix availability) site to know everything that is homologated and supported by SAP:
    http://service.sap.com/pam
    I hope this helps.
    Best regards,
    Cristiano

  • PI 7.31 Dual Stack Using BPM/BRM and ccBPM

    Hello,
    My client has decided to use SAP PI 7.31, because we have many ccBPM solutions, being used a long time, the idea is install the Dual Stack solution and keep using the ccBPM, at least for while.
    But for the new integration solutions, we would like to use the AEX(Local AEX-Based) and connect to BPM and BRM, and maybe migrate the old solutions when possible.
    Is it possible, use the both solutions( AEX/BPM/BRM and ccBPM) ? In this case, we will have all the benefits and great perfomance
    when using the AEX/BPM/BRM(Local AEX-Based) solution, that we have in the single stack ?
    Best regards,
    Dylon.

    Hi, vishal jain.
    Thank you! Checking your link, we will probably choose the third case:
    If PI is installed as dual-stack, then PO, PI and BPM/BRM, will have to be installed with different SIDs.  PI on one SID and BPM/BRM on a different SID.
    But the question remains... in this case is possible to use ccBPM and BPM/BRM, ok ?
    And when using the BPM/BRPM, how is the performance and benefits ?
    Are the same when using single stack solution ?
    Best regards!

  • Drag and Drop not supported in TextBox in Automation

    Hi All,     This is regarding the drag and drop functionality support in text box in Flex automation. I am using the automation API of Flex. since our application is having multiple modules, I had to use the automation swc given as an attachment in the JIRA Issue 1088. ( bugs.adobe.com/jira/browser/FlexEnt-1088) But these swc are not recording drag and drop on to text box. I tried adding the drag and drop events to the AutoQuickEnv.xml for textbox ; but in vain. Any help is appreciated.  Regards Gireesh

    Hi Torsten
    Thank you for this hint!
    I've installed NW 7.02 ABAP trial within a win x 64 VM on an ESXi 4.1 VMWare Server.
    NSP is running - but shows also the problem described in this thread.
    So I tried to solve this issue by applying note1576441 - logged on as BCUSER.
    BUT:
    I need ACCESS KEYs to modify the relevant SAP objects.
    My question:
    Where can I get the appr. ACCESS KEYs for the SAP objects I've to correct as described within note 1576441?
    Do I have logged on as DDIC or SAP* or ...*
    Would be great if you or anyone of this community has a hint acc. to this issue!
    Thank you all in advance!
    Regards, Stefan

  • IDoc structure mismatch between SAP R/3 and PI

    Hi,
    There is an interface in PI which receives IDoc from SAP R/3 system. I have been facing an issue of IDoc structure mismatch (in terms of data present in it) between SAP R/3 and when PI receives the IDoc.
    To be more precise,
    In SAP R/3 system, the value ABC is present in the field DOCNUM in the IDoc.
    But when the PI receives the same IDoc from SAP R/3 (as seen in Integration Engine), the value ABC is present in a different field and the DOCNUM field is empty.
    <DOCNUM></DOCNUM>
    <ARCKEY>ABC</ARCKEY>
    The first step towards resolution was to delete and reimport the IDoc metadata from SAP R/3 in PI system using IDX2, which did not help in this case.
    Could anyone please help in resolving the field mismatch between the IDoc triggered from SAP R/3 and the IDoc received by PI.
    Regards,
    Prajeet

    Hi Prajeet,
    it's long ago but your question has not been finally solved, so let me try to give you an answer. We are facing the same problem after patching our PI.
    I think the reason for the different behaviour is related to SAP note 1233908, where SAP has changed the IDoc adapter.
    https://service.sap.com/sap/support/notes/1233908
    Regards,
    Lars

  • SAP best practice and ASAP methodology

    Hi,
            Can any body please explain me
                                                          1. What is SAP best practice?
                                                           2. What is ASAP methodology?
    Regards
    Deep

    Dear,
    Please refer these links,
    [SAP best practice |http://www12.sap.com/services/bysubject/servsuptech/servicedetail.epx?context=0DFA5A0C701B93893897C14DC7FFA7D62DC24E6E9A4B8FFC77CA0603A1ECCF58A86F0DCC6CCC177ED84EA76F625FC1E9C6DCDA90C9389A397DAB524E480931FB6B96F168ACE1F8BA2AFC61C9F8A28B651682A04F7CEAA0C4%7c0E320720D451E81CDACA9CEB479AA7E5E2B8164BEC98FE2B092F54AF5F9035AABA8D9DDCD87520DB9DA337A831009FFCF6D9C0658A98A195866EC702B63C1173C6972CA72A1F8CB611798A53C885CA23A3C0521D54A19FD1B3FD9FF5BB48CFCC26B9150F09FF3EAD843053088C59B01E24EA8E8F76BF32B1DB712E8E2A007E7F93D85AF466885BBD78A8187490370C3CB3F23FCBC9A1A0D7]
    [ASAP methodology|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/asap%2bfocus%]
    ASAP methodology is one methodlogy used in implementing SAP .
    The ASAP methodology adheres to a specific road map that addresses the following five general Phases:
    Project Preparation, in which the project team is identified and mobilized, the project Standards are defined, and the project work environment is set up;
    Blueprint, in which the business processes are defined and the business blueprint document is designed;
    Realization, in which the system is configured, knowledge transfer occurs, extensive unit testing is completed, and data mappings and data requirements for migration are defined;
    Final Preparation, in which final integration testing, stress testing, and conversion testing are conducted, and all end users are trained; and
    Go-Live and Support, in which the data is migrated from the legacy systems, the new system are activated, and post-implementation support is provided.
    ASAP incorporates standard design templates and accelerators covering every functional area within the system, as well as supporting all implementation processes. Complementing the ASAP accelerators, the project manager can create a comprehensive project plan, covering the overall project, project staffing plan, and each sub-process such as system testing, communication and data migration. Milestones are set for every work path, and progress is carefully tracked by the project management team.
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Queries regarding instalation of SAP R/3 and BW

    Dear Friends,
    I am planning to install SAP R/3 and BW on a external hard disk.Then install two operating system in my laptop which supports R/3 and BW.
    Regarding this I have below mentioned doubts / queries,
    1) Is is workable solution?
    2) Is my approach correct ? If not what do u suggest ?
    3) what are the advantage & Disadvantage of this?
    4) What should be the configuration ? like total capacity of the Hard disk etc...?
    I hard from Technical person that , If I install SAP BW / R3 on external hard disk, the performance becomes slow as i'll connect to my lap top through USB port. Hence the processin time will be more. Is this true?
    Also he mentioned there will be noice when i work with external Hard Disk.
    I require this information ASAP, your answers will be of great help to me.
    Thanks,
    Nayak.

    Hi,
    YOU can check the following for BW extraction
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    PLease also have a look at BW data modelling guide,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5586d290-0201-0010-b19e-a8b8b91207b8
    http://www.thespot4sap.com/Articles/SAP_BW_Metadata_Modelling.asp
    Please reward points.

  • SAP Backend systems and SAP OPI Integration

    Dear Experts
    I have been reading many articles and blogs on Operational Process Intelligence but have couple of doubts regarding capturing events
    from different backend systems
    1. There is a Business workflow in ERP which we needs to be imported in SAP OPI. In one of the guides its mentioned that
    "The ERP system needs to have the software component
    SAP_BS_FND satisfying the below mentioned support package levels for various releases. ● 731: support package level 5 ● 730: support package level 4 ● 702: support package level 10 ● 701: support package level 12".
    If a customer is not on SAP Business Suite and its only ERP installation then does this mean that we cannot import Business workflows in SAP OPI?
    2. In lot of blogs its mentioned to use Process Observer in backend systems but what if client has not activated or using Process Observer in their landscape. What would be our options here to capture events ?
    3. In SRM system we typically use Process Controlled workflows. Can these be imported directly in SAP OPI business scenario. Again assume there is no Process Observer here. Has anybody tried this?
    Would be really great if I get clarity on these items
    Regards
    Rahul

    Hello
    Do you need to connect SAP R/3 users to ADS?
    for that just follow SPRO setting of LDAP and customize your SAP system to access LDAP.
    If you need to define HPUX users using ADS, It will require you the define login stack for HPUX.
    Erez

  • SAP Business Objects and IBM i White Paper available

    The "SAP Business Objects and IBM i" White Paper is available on IBM Techdocs under the follwing URL:
    [http://www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101947]
    The SAP Business Objects and IBM i white paper describes how the SAP Business Objects Enterprise XI server fits into an SAP on IBM i landscape. The paper provides detailed instructions showing how to integrate data sources located on an IBM i server with SAP Business Objects.
    Feel free to post your feedback and comments.
    Thanks and Regards,
    Mirco
    Edited by: Mirco Malessa on Jul 14, 2011 1:11 PM

    Hi ,
       Please find these blogs by Ingo. This should help you.
    BusinessObjects and SAP - Installation and Configuration Part 1 of 4
    Install Part #1
    BusinessObjects and SAP - Installation and Configuration Part 2 of 4
    Install Part #2
    BusinessObjects and SAP - Installation and Configuration Part 3 of 4
    Install Part #3
    BusinessObjects and SAP - Installation and Configuration Part 4 of 4
    Install Part #4
    BusinessObjects and SAP - Configure SAP Authentication
    SAP Authentication
    BusinessObjects Integration with SAP NetWeaver BI - Technical Material
    Thanks,
    Gopi

  • Difference between BPM, BRM, and BRF

    Hi Experts,
    I need your suggestion.
    I am in a confution to learn Business Rules.
    When I am searching for SAP Business Rules in net, i got Business Rules Management(BRM), Business Rules Framework(BRF) and Business Process Management(BPM).
    My core module is SAP ABAP, and little bit working experience in WebDynpro ABAP.
    What exactly the difference among these 3 modules i.e. BPM, BRM and BRF. What is the link among these 3 modules.
    For my ABAP experience, any one suits. If it is which one is suitable and where can i find the exact material. What are all the tools required other than R/3.
    Thanks in Advance.
    Regards,
    Chandu V

    Hi Chandu,
    pls take a look at [last year's TechEd slides about BRM and BRFplus.|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50a961f8-8dd7-2d10-8f9b-f20285870733] The slides are still valid.
    BR,
    Carsten

  • SAP CRM Tables and Fields for Contract start and End dates

    Hi Experts,
    Please Provide me SAP CRM Tables and Field names for the below.
    SAP CRM Contracts start date and End date
    SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
    Thanks and Regards,
    Teja

    correction
    10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev  
    Tweet
    SAP CRM Tables and Fields for Contract start and End dates
    This question has been Answered.
    Teja Dhar 12 Oct, 2009 8:03 PM  
    Currently Being Moderated
    Hi Experts,
    Please Provide me SAP CRM Tables and Field names for the below.
    SAP CRM Contracts start date and End date
    SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
    Thanks and Regards,
    Teja
    Correct Answer by Sreekantha Gorla  on Oct 22, 2009 8:22 PM
    Hi,
    dates will be stores in the table 'SCAPPTSEG'.
    I double checked it. This table stores all the date types of one order transactions...
    The relationship is as follows..
    CRMD_ORDERADM_H- guid = crmd_link-guid_hi
    crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
    Thanks and regards,
    Sreekanth
    <:footer>See the answer in context
    6281 Views
    Topics: Customer Relationship Management
    Reply
    Average User Rating
    0
    (0 ratings)
    My Rating:
      Rating Saved!
    Comment on your rating
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi, 
    you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
    There is something in table SCAPPT and SCGENAPPT.
    Regards, R
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)  
    Currently Being Moderated
        Hi Robert, 
    I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
    Can you suggest some relevant tables.
    Best Regards,
    Teja
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi, 
    Table SCAPPTSEG stores the contract start and end dates.
    Thanks,
    Sreekanth
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)  
    Currently Being Moderated
        Hi Sreekanth, 
    I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
    Can you suggest some relevant tables.
    Best Regards,
    Teja
    Report Abuse
    Like (0)
    Reply
    Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
    Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi, 
    dates will be stores in the table 'SCAPPTSEG'.
    I double checked it. This table stores all the date types of one order transactions...
    The relationship is as follows..
    CRMD_ORDERADM_H- guid = crmd_link-guid_hi
    crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
    Thanks and regards,
    Sreekanth
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)  
    Currently Being Moderated
        Hi, 
    I can tell you where the pricing records are saved, replicated from ECC.
    The data from ECC table Axxx (e.g. A304) is replicated to CRM table
    CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
    Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
    About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
    What might help is to execute program "CRM_ORDER_READ". Here you can find
    the relevant entries also.
    regards,
    Wim
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi Experts, 
    Thanks a lot for your support.My problem got resolved.
    Best Regards,
    Teja
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi Teja 
    Please let me know how you got the dates. i got the same requirement
    Report Abuse
    Like (0)
    Reply
    Correction on above mail.
    Hi Sanjay,
    Can you please help me to find the contract st art date and end date fetching from the table as below
    ITEM DATES:
    Select guid_set from table CRMD_LINK where guid_hi              =  CRMD_ORDER_I-GUID AND
                                                                              OBJTYPE_HI     =  '06'
                                                                              OBJTYPE_SET  =  '30'.
    Select * from SCAPPTSEG where APPL_GUID = guid_set.
    as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
    pls suggest further on same
    regards
    Arora

Maybe you are looking for