SAP Objects not getting loaded in Sybase Unwired Platform

Hi,
I am able to create an SAP connection successfully through SAP router string..
But it is not able to Read the SAP objects from the Repository..
The status bar says 'Reading Objects from Repository' but the Application Components are not seen..
Any help would be appreciated.
Thanks

Shyam,
Try following :
Try to Update your Workspace JCO.
OR
This is not a requirement for Windows 7, or 64-bit Windows Server 2008 system.
Install the Microsoft Visual C++ 2005 Service Pack 1 Redistributable.
Obtain the Microsoft Visual C++ 2005 Service Pack 1 Redistributable from: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14431.
You can install the service pack after installing the 2.1 ESD #3 upgrade if you discover you need it.
Let me know if it works for u.

Similar Messages

Monthly sales forecast file upload new combinations not getting loaded.

For one of our planning areas, I get sales forecast as spread sheet and upload this to the infocube.
We run CIF daily and monthly also to include all new material.
When I upload the file when I checked the log everything went fine with 3 warnings for 3 products with message "contents of the infocube not contained in BasicPlobStruc.
Now these material are already in APO by Sold to party is new and there is no combination to this Sold to party and hence the the data did not get loaded.
Now my Client wants to change whatever required so that all new combinations data are included in when month end sales forecast is loaded.
Can you advice what needs to be done as ther are large number of products I wont which are new combinations and as far as my knowledge is concerned , since there is no history CVC's are not automatically created.
Can anyone advice.

Hi Siva,
To b frank I did not completely understand what you are talking about as you are all over.
As I understand you are getting excel file for sales forecast and you upload the flat file to cube and generate CVCs based on this cube. You are not able to generate the CVCs for all combinations in the cube.
"Sold to party is new"-- where is this new? in the cube data?
"contents of the infocube not contained in BasicPlobStruc." - You get this warning if you have lets say 4 characteristics in your cube and only 3 of them in the planning object structure. This is ok. The rule of thumb is that "Your planning object structure has to be subset of your infocube". Which means that you cannot have 3 characteristics in cube and have all those 3 +1 additional in POS.
This still does not stop the system from creating all combinations int he cube as CVCs.
The possible reasons why the combinations(CVCs) are not generated from cube:
1. If there are empty values in a record like below
Plant--Materialsales org.-customer---qty.
P1--M1SO1____----10
P2--M2SO2C2--
17
The system only creates the combination P2M2SO2C2 but leaves out the first combination..Why? you have an empty value and system cannot take it so it leaves it out.
2. If you are checking the flag "Check SCM master data" in MC62 while CVC creation. The system checks the master data for products, locations and if the product or location does not exist the system doesnot create the corresponding combination.
Please correct me if I misunderstood you and also do not hesitate to ask more questions for clarity.

Data is not getting loaded in the Cube

Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
Thanks

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

The custm error page is not getting loaded in TomCat 5.0

Hi all,
I am working on a JSF web application deployed in Tomcat 5.0.I was trying to redirect 404 and 500 error pages to custom error pages.But the error pages are not getting loaded and i am getting normal Tocat 404 status page.
I am giving the web.xml entry for the error page defenition.
<error-page>
          <error-code>404</error-code>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
     <error-page>
          <error-code>500</error-code>
          <location>/faces/SessionExpirepage.jsp</location>
     </error-page>
     <error-page>
          <exception-type>java.lang.Throwable</exception-type>
          <location>/faces/displayErrorpage.jsp</location>
     </error-page>
Please help me out to solve this problem.Its urgent.I will be greatful for any kind of help.
Note: The same application working fine,ie,the error page is getting loaded while deploying WAS 6.0.
Jeevan Edakkunnath.

That's a specification version. I was asking for the implementation and version. Is it the Sun reference implementation (Sun JSF RI)? If so, which build?
It works flawlessly here on the latest build of Sun JSF RI 1.1, the 1.1_02. You can get the latest build at [http://javaserverfaces.dev.java.net]. I was using Tomcat 6.0.14 by the way, it might make difference.
Does it work if you use plain vanilla JSP files and do not pass the request through the FacesServlet? I recall some bugs related to it, but I am not sure anymore if it is related to the JSF implementation or application server used.

Images not getting Loaded while running Java Application through jar file

Hello Friends,
I have a problem while starting my application.I have written my application using pure java.There is no JSP or anything just pure swings.Mine is a standalone appplication.So i used to run it using a batch file.And when i used to start my application it used to not show me the images.so what i did was i mentioned the starting directory in the properties of the batch file (ie in the start in column field).But that was when i was using weblogic server.And i have lot of people working on the same application.so i used ZAC publisher in weblogic and along with that i used to publish the batch file also.so the users dint have any problem.But now what is my problem is i m trying to use JAVA Webstart instead of weblogic ZAC.Now in webstart what happens is that i have to run the appliaction thru jar file.so where do i mention the class path so that the images get loaded.As of now the imaes are not getting loaded.i feel this is a class path problem.but where do i mention it that is my problem.It would be really helpfule if someone could help me out.
thanx and regards,
[email protected]

try out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file

Applet does not get loaded when viewed in a browser

Hi,
I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
An error appears at the bottom of the browser that load: class not found.
Any suggestions...please..
Thank you....
Pooja

If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
Hope one of these helps!

Some images are not getting loaded

I am online tutor. And today i got a problem . Images are not getting loaded and also many things are not getting loaded. But when i use internet explorer i don't have that problem . But i don wanna u internet explrer. Can any one help me. And the site with which i am facing problem is tutor.tutorvista.net

Please try the instructions in this article: http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show
Hope this helps. :)

W_DAY_D is not getting Loaded with Enterprise WEEK or FISCAL week informati

HI Experts,
We have OBI Application 7.9.6.1 (FIN,SCM,PSA analytics application).
We are using Oracle EBS 12.0.6 as the source system.
we are using the Enteprise Calendar in EBS to load the W_DAY_D,but the W_DAY_D is not getting Loaded with Enterprise WEEK or FISCAL week informations,
does any one have an answer to this question,how to load theEnterprise WEEK or FISCAL week information in the W_DAY_D table??
We have raised an SR with Oracle Support & got the reply that this is a product BUG & they have internaly raised an Enhancement Request.
God knows when this will be fixed??
Can any one provide me with a work around ?/
Thanks

Hello:
Please look at these W_MCAL_PERIOD_D, and W_MCAL_DAY_D Tables for Fiscal information. For more information you can look at the RPD BMM Layer Dim - Date Fiscal Calendar.
With Regards,
Mohan

MDM 7.1.02.59 : Repository not getting loaded

We are experincing a problem.
The problem is Repository is not getting loaded. We have tried the
below:
1.#Verify-> Check Repository: 0 fatal and 0 Non-fatal errors.
2.#Verify-> Repair : 0 fatal and 0 Non-fatal errors were corrected
We Tried loading the Repository with Immediate and Update Indices
option. The error we get is:
Load aborted with error(0xFFAA0300: Table not found).
We tried restarting the server and database as well. But it gives same
error.
Any valubale suggestions on the same will be highly appreciated.
Thanks in advance .
Regards,
Nitin

Hi Nitin,
Can you post a list of all the database tables that are connected to this repository?
You'll have to access the database using a DB client or SQL. The DB schema for this repository should be named similar to the repository name.
Please be aware that there are two schemas per repository - one with suffix "_Z<3 digits>", one with "_M<3 digits>".
Best regards,
Dennis

Child CMP local object not getting refreshed with parent entity information

Hi,
I have a container mnaged relatioships (example) between Emp and Dept entities. I have generated their DTO and using them to tranfer data across layers.
I am updating deptno CMP field of EMP entity and returning the Entity DTO. When extracting dept information like empLocalDTO.getDept_Deptno().getDname(), it's returning old department name.
Can anybody help in resolving this problem of DeptLocal object not getting updated when setting deptno on EmpLocal entity?
Session Bean updateEmp method code:
EmpLocal local = (EmpLocal) getEmpLocalHome().findByPrimaryKey(dto.getEmpno());
local.setDeptno(dto.getDeptno());
local.setSal(dto.getSal());
local.setJob(dto.getJob());
EmpLocalDTO eDTO = new EmpLocalDTO(local);
Servlet Code:
localDTO = empLocal.updateEmp(localDTO);
out.println("Dname : " + localDTO.getDept_deptnoDTO().getDname() + " <BR/>");
Thanks

I haven't personally seen this but Daniele Grandini in his article states:
- The
ICMP latency between the Management Server and the Domain Controller is above 150 msec (this is no fixed rule)
- This specific issue manifest itself when the Active Directory lookup takes more than 1000 msec (more or less);
If the agents have been green (healthy) intermittently then it suggests that it is not a configuration issue as such with the agent but some sort of communication \ authentication issue. And that suggests you are seeing the same issue .. at present there
isn't a straight forward workaround as you can't force the agents to use certificates to get around the problem.
The notes at the bottom of Daniele's article are not promising - http://nocentdocent.wordpress.com/2012/10/26/opsmgr-2012-agents-across-slow-wan-links-are-unable-to-communicate/
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

CCM: More than two items in catalog are not getting loaded into CCM

Hi All,
We configured CCM to our client and working fine, but we are able to upload only two items. when we add third item or more items to catalog, these are not getting loaded in to CCM (The catalog is loading find and there is no problem when loading).
The log shows green, but items are not there in CCM.
Is any one faced similar problem?
How can we export master schema from CCM to desktop?
Thanks,
Ravi Varma

It is Supplier catalog
Ravi

Apps imattic not getting loaded on iPad or iPhone

I down loaded imattic apps from apps store. It got downloaded on the iPad, synced with iPhone as we'll, but the problem is the app imattic does not get loaded with any article it goes to loading and gets stuck there it self, it does not work on iPhone as we'll

Hello there, vikram80.
Sounds like your app is stuck downloading on both of your iOS devices. You can try tapping on the application icon to resume the download, as outline in this featured discussion:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks for reaching out ot Apple Support Communites.
Cheers,
Pedro.

Sybase Unwired Platform - Error in creating a Blackberry Application

Hi Experts,
I am working in the development of Blackberry application using Sybase Unwired Platform and SAP as the backend data source. As a part of this I had created a Remote enabled function module in SAP which returns an internal table as the output. In the Sybase Unwired Workspace I had created an MBO with this function module and created the User Interface using Device Application Designer. When I test this application in the simulator BlackBerry Storm2 9550, It is showing an error which says
Encountered error while synchronizing package <package_name> and synchronization group "default", see logs for details : com.Sybase.persistence.SynchronizeException: com.Sybase.persistence.ProtocolException: deivce's protocol version is incompatible with the server's protocol version. (1>0)
I am using Sybase Unwired Platform 1.5.5 for this development and BlackBerry Storm2 9550 as simulator.
Can anybody help me to solve this issue?
Thanks and regards,
Rinzy Deena Mathews.

Hi pradeep,
      Application is connected with SUP because i tried a simple application using sampleDB.
        But when i used to connect SAP to Application, that error generated.
        I created SAP Connection successfully but its still show that "Could not initialize class com.sap.mw.jco.JCO in Sybase Control Center's Domain's log page.
        I am not able to understand why that error generate because i connected successfully with SAP in Sybase Workspace.
        I think that is the problem of 64 & 32 bit files problem.
I used windows 7 64 bit.
Please reply me.
Thanks & Regards,
Tapan

How to write sync service in sybase unwired platform

Hi
How to write sync service in sybase unwired platform?
Thanks in advance....

Hi!
A RESTful web service (also called a RESTful web API) is a simple web service implemented using HTTP and the principles of REST. It is a collection of resources, with three defined aspects:
- the base URI for the web service, such as http://example.com/resources/
- the Internet media type of the data supported by the web service. This is often JSON, XML or YAML but can be any other valid Internet media type.
- the set of operations supported by the web service using HTTP methods (e.g., POST, GET, PUT or DELETE).
On Sybase Unwired WorkSpace you can select, in Enterprise Explorer, REST Web Services connection defining a resource base URL and URI template, and then using this as MBO defining HTTP method and parameters.
Try this:
http://en.wikipedia.org/wiki/Representational_State_Transfer
and this:
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0155/doc/html/fre1261416769728.html
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0155/doc/html/fre1261424660910.html

Is 'Sybase Unwired Platform' supports Android?

Hi Experts:
I am learning android develop , the SUP support blackberry and iphone , i want to konw if the 'Sybase unwired platform' support android , if support can you tell me some books and i can learn it.
Thank you very much.
Satish.

hi
Currently sybase supports Windows mobile ,iPhone ,blackberry Platforms but soon it will support android also
as android is growing very fast SYBASE will soon launch platform for android also.
sybase site has all the relevant information on this though currently not for android but
there is lot to learn in sybase you can go through this link
Hope it may help you
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.pubs.docset-SUP-1.5.5/doc/html/title.html
regards
suresh joshi

SAP Objects not getting loaded in Sybase Unwired Platform

Similar Messages

Maybe you are looking for