SAP On Dataguard

Hi,
I would like to know the prerequisite and feasibility of implementing DataGuard on SAP ECC 6 which is running with Oracle 10G. I heard Oracle 10G built in with Dataguard. Can someone help me on the details regarding this. We are trying to implement this.
regards,
raj

Raj,
Please find attached link. Once you open it take a look at Stefan's reply with useful links on dataguard.
[Dataguard: switchover-switchback;
I am sure this will help you.
Manoj Chintawar

Similar Messages

SAP official support of Oracle Dataguard

Hello all,
Since which Oracle version SAP ECC6 supported dataguard? Please refer me to SAP note or document.
regards,
Daniel

Hello Daniel,
all currently supported Oracle versions (10.2.0.5, 11.2.0.2, 11.2.0.3) for SAP ECC 6.0 are supported with Oracle Data Guard. Previous patch sets were supported too.
Sapnote #105047 (Point "15. Data Guard") describes the suppported Data Guard functions.
Regards
Stefan

Cannot login oim after restore db from other server using dataguard

Hi all,
i find a problem,
I installed OIM 11g R1 application and database both DC and DRC server, and all application and database is already running normally. i used dataguard for set up both database.so, i restore database DRC to DC, and database DC already restored and weblogic,oim server,soa already up. but when i try to login into oim application i cannot login because wrong password, and i go to forgot password i get the popup error "cant find resource for bundle java.util.PropertyResourceBundle". i think this problem about keystore, but when i copy keystore in server DRC to DR, this problem can't be solve.
any idea to solve this problem? or i set up dataguard using different way with oracle best practice?
env :
OIM 11.1.1.5 patch 7
wl 10.3.5
db 11.2.0

Hi San Xu,
Thanks for the reply.
I cannot remove add-on with this database, when I click button update there is same message "Continue working without this Add-on"
I already try to remove the add-on in Test Server with another database in same server (I can remove the add-on used another database) and then I try to clear up entries in registration file and then try to run SAP B1 as administrator to register and install again with the database which infected, with result cannot install with same message "Continue working without this Add-on", but I can install again the add-on with another database with no problem and the add-on run well in another database.
I'm very confused, why any add-on cannot installed in this database only and also cannot remove use this database but run well (can installed, can remove and also can used) in another database in same server.
I also already try such your suggestions to create a new test company in Test Server and try remove and installing the add-on with the new database, there is no problem with this new database (the add-on can remove, installed and then can run well in the new database). But still the add-on cannot run in the database which I backup from Production Server.
Best Regards,
Silvy

When using DataGuard, the logical standby DB is already "OPEN"?

When I was setting up the physical standby DB several years ago no DataGuard got involved), I had the impression that the standby DB is in MOUNT status.
But since when using DataGuard to set up the logical standby DB, the logical standby DB can be used as it is already OPENed.
Is it actually in OPEN status? If so, can the primary and logical standby have the same SID without any trouble?
Please help advise. Thanks a lot!

Hello Christy,
yes it is ok that both database are in status OPEN, that is also the main reason for using logical standby databases (you can do changes and queries on standby too).
I hope you don't use a logical standby database in a SAP environment, because of this is NOT supported. Check sapnote #105047 - Point "14. Data Guard". A logical standby database has limitations.
If you just want to use the physical standby database for queries you can open it in read only or you can use flashback technology for read/write. With Oracle 11g you have these features included in data guard itself (Active Data Guard / Snapshot StandBy) to perform such steps automatically.
Regards
Stefan

Procedure for Standby Database for SAP ERP 6.0

Hello All,
We are using SAP ERP 6.0 with Oracle 10g with AIX 5.3.
We are planning to setup a standby database for our SAP ERP 6.0 production system as part of remote DR site using Oracle Data Guard.
I was under the assumption that i can first install an erp 6.0 (ABAP) system using homogeneous system copy from my erp 6.0 (ABAP) production system and then start configuring oracle dataguard.
But the System Copy Guide "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP" has mentioned that "You cannot create standby systems with a system copy".
Please suggest the best practise or the procedure for creating standby database for SAP ERP 6.0 system. Iam not looking at the steps for creating a pure oracle 10g standby database, but with SAP instances as well.
Thanks in advance.
CVS

Hi,
Please refer the below mentioned link for configuring data guard.
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10823/create_ps.htm
Below mentioned are the sequence of stpes, which needs to be followed for setting up data guard.
3.1 Configuring the Primary Database
3.1.1 Enable archiving and define a local archiving destination
3.1.2 Create a password file
3.1.3 Configuring the Oracle networking files
3.1.4 Set initialization parameters on the primary database
3.1.5 Take Offline/Online backup of the primary database
3.1.6 Create a control file for the standby database
3.1.7 Prepare initialization parameter file for the standby database and start the primary database with the changed pfile.
3.1.8 Copy all files from the primary host to the standby host
3.2 Configuring the Standby Database
3.2.1 Configuring the Oracle networking files
3.2.2 Create a INIT parameter file for the standby database
3.2.3 Copy the standby controlfile to the appropriate location
3.2.4 Create Oracle Password File
3.2.5 Start the physical standby database
3.2.6 Initiate log apply services
Regards,
Ranjith

Dataguard : redo transport service

Hi,
I have a question regarding dataguard: I have a primary database (oracle 10.2.0.4 win 2003 x64 R2 SP2) communicating with a standby and everything was working like a charm up to the moment where the primary starts creating a lot of session with the user PUBLIC on the standby.... At the end, the standby exceeded the maximum processes and the redo transport service stopped.
So I stopped/restart the standby and as soon as the primary sees the standby, there are 7 sessions with user PUBLIC that are created. Then few seconds, after another one was created and another one and it stoppes at 9 this time.
I would like to know what drives the creation of a new session and what is the purpose of those sessions (I thinks it maintains the synchronisation information....) .... What could be the reason for so many sessions to be created... Could it be network failure...
Thanks
Christophe Lizé

Hi Ogan,
Thanks for your answer. This is a windows box. SAP is the application that consumes the data.
In the standby alertlog, we can see the session that is started:
Setting recovery target incarnation to 2
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=14, OS id=4380
ARC1 started with pid=15, OS id=5008
ARC2 started with pid=16, OS id=2276
ARC3 started with pid=17, OS id=3596
ARC4 started with pid=18, OS id=5852
ARC5 started with pid=19, OS id=6044
ARC6 started with pid=20, OS id=4956
ARC7 started with pid=21, OS id=6068
ARC8 started with pid=22, OS id=2380
Wed Nov 24 15:05:52 2010
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC9 started with pid=23, OS id=5296
Wed Nov 24 15:05:53 2010
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
Wed Nov 24 15:05:53 2010
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC0: Thread not mounted
Wed Nov 24 15:05:53 2010
ARC1: Becoming the heartbeat ARCH
ARC1: Thread not mounted
Wed Nov 24 15:05:53 2010
ARC4: Thread not mounted
Wed Nov 24 15:05:53 2010
Successful mount of redo thread 1, with mount id 589430539
Wed Nov 24 15:05:53 2010
Physical Standby Database mounted.
Completed: alter database mount standby database
Wed Nov 24 15:05:53 2010
alter database recover managed standby database disconnect from session
MRP0 started with pid=24, OS id=3980
Wed Nov 24 15:05:54 2010
ARC7: Thread not mounted
Wed Nov 24 15:05:55 2010
ARC9: Thread not mounted
Wed Nov 24 15:05:56 2010
ARC5: Thread not mounted
Wed Nov 24 15:05:57 2010
ARC3: Thread not mounted
Wed Nov 24 15:05:58 2010
ARC2: Thread not mounted
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 7 processes
Wed Nov 24 15:05:58 2010
Waiting for all non-current ORLs to be archived...
Wed Nov 24 15:05:59 2010
ARC6: Thread not mounted
Wed Nov 24 15:05:59 2010
Completed: alter database recover managed standby database disconnect from session
Wed Nov 24 15:05:59 2010
Media Recovery Waiting for thread 1 sequence 816
Fetching gap sequence in thread 1, gap sequence 816-821
Wed Nov 24 15:06:00 2010
ARC8: Thread not mounted
Wed Nov 24 15:06:10 2010
Using STANDBY_ARCHIVE_DEST parameter default value as G:\oracle\PPS\oraarch
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 5408
RFS[1]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
RFS LogMiner: Client disabled from further notification
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2360
RFS[2]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 5872
RFS[3]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 2012
RFS[4]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[5]: Assigned to RFS process 5336
RFS[5]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[6]: Assigned to RFS process 3888
RFS[6]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[7]: Assigned to RFS process 3088
RFS[7]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
RFS[3]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_817_735230249.ARC'
Wed Nov 24 15:06:10 2010
RFS[4]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_818_735230249.ARC'
Wed Nov 24 15:06:10 2010
RFS[7]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_821_735230249.ARC'
Wed Nov 24 15:06:11 2010
RFS[2]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_819_735230249.ARC'
Wed Nov 24 15:06:11 2010
RFS[5]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_816_735230249.ARC'
Wed Nov 24 15:06:11 2010
RFS[6]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_820_735230249.ARC'
Wed Nov 24 15:06:29 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_816_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_817_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_818_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_819_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_820_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_821_735230249.ARC
Media Recovery Waiting for thread 1 sequence 822
Fetching gap sequence in thread 1, gap sequence 822-822
Wed Nov 24 15:07:10 2010
RFS[6]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_822_735230249.ARC'
Wed Nov 24 15:07:31 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_822_735230249.ARC
Media Recovery Waiting for thread 1 sequence 823
Wed Nov 24 15:08:11 2010
RFS[7]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_823_735230249.ARC'
Wed Nov 24 15:08:31 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_823_735230249.ARC
Media Recovery Waiting for thread 1 sequence 824
Wed Nov 24 15:15:00 2010
RFS[1]: Successfully opened standby log 5: 'G:\ORACLE\PPS\ORIGLOGA\STBLOG_G5M1.DBF'
Wed Nov 24 15:15:01 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_824_735230249.ARCA lot of RFS process are created and each one is taking a session with the user PUBLIC.
What drives the creation of RFS process... and why Oracle does not reuse those created....
on the standby, the following query shows UNKNOW client_process
SQL> select process,status,client_process,sequence#,block#,active_agents,known_agents
2 from v$managed_standby;
PROCESS STATUS       CLIENT_P SEQUENCE#     BLOCK# ACTIVE_AGENTS KNOWN_AGENTS
ARCH    CLOSING      ARCH            800          1             0            0
ARCH    CLOSING      ARCH            801          1             0            0
ARCH    CLOSING      ARCH            802          1             0            0
ARCH    CLOSING      ARCH            803       2049             0            0
ARCH    CLOSING      ARCH            804          1             0            0
ARCH    CLOSING      ARCH            805          1             0            0
ARCH    CLOSING      ARCH            795       2049             0            0
ARCH    CLOSING      ARCH            796          1             0            0
ARCH    CLOSING      ARCH            797          1             0            0
ARCH    CLOSING      ARCH            798          1             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
MRP0    WAIT_FOR_LOG N/A             807          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
PROCESS STATUS       CLIENT_P SEQUENCE#     BLOCK# ACTIVE_AGENTS KNOWN_AGENTS
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
RFS     IDLE         UNKNOWN           0          0             0            0
57 rows selected.I don't know if you have enough information...
Thanks
Christophe

Oracle upgrade with DataGuard

Hello Experts,
We have to upgrade oracle db from 10.2.0.2 to 11g.
While upgrading to PRD system there is DR system also, which uses DataGuard for archive update on DR system.
I would like to know that we need to take special care for DataGuard or DBUA will take care of DataGuard mechanism?
Thanks in advance.
Regards,
Yogesh

Hi Yogesh,
in a SAP environment it is even more specific than the standard oracle upgrade guide (because of the compatible parameter and SAP scripts).
We discussed this already in this thread: Upgrade to Oracle 11G in standby environment
Regards
Stefan

DR Site for SAP

Hello SDN,
We have configure DR site for our SAP production system with oracle dataguard. We have done failover successfully. But we are not able to do switchover bitween oracle RAC (two instance) Primary database and Physical standby database Single instance.
so please we are looking for help can some one help us on this.
Thanks & regards,
Vijay

Hi,
Your question seems to be realted to storage not SQL server you should post your question in forum dealing with storage. You should also involve SAP vendor regarding your license question.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SAP DR Site

Dear All,
We have SAP ECC 6 / Oracle 10g on HP Unix 11.31.
I have prepared a Test scenario for SAP DR solution for our Testing Server.
I have configured oracle dataguard successfully.
I have installed SAP ECC 6 on same server where oracle standby database is configured.
So in case of primary server goes down I can activate the standby database and start SAP instance.
Now I need a suggestion on connect to SAP while primary goes down.
1. Present Status : If primary goes down all users will be disconnected. I have already configured SAPGUI for connect to DR server in case of primary failure. So there are two connection on SAPGUI one is for primary and one is for DR server.
2. Is there any solution where I do not need to configure another connection on SAPGUI for DR.
3. In case of primary failure. Users are disconnected. But as soon as I activate standby server, Users can reconnect to server again.
We donu2019t want that users has to remember that on SAP GUI one connection is for Primary and one is for Standby,
Thanks in advance,
Nirav

Hello Nirav,
If I understand it the right way :
You'll have your production on DR site, while the other systems keep working on your primary site.
Your STMS must still be usable.
About the instances still on primary site :
If you use DNS and FQDNs also for the communication between dev, qual and production, then the DNS switch will do the work.
Your trans directory is usually an nfs share. You mount the share using fqdn. Everything is O.K.
On your DR site :
Your DR server must be able to route to your DEV and QUAL on your primary site wether using an /etc/hosts file or a DNS on your drp site.
Hope this helps,
Steve.

Oracle Data Guard, SAP instances not coming up after switchover

Dear Experts,
We have implemented Dataguard, Uisng Maximum performance with real time apply (redo log apply). Redo logs are apply from primary to standby perfectly. And the SAP Instances are up and running, when we create a user in primary its reflecting in standby server.
When i do the the switchover from primary <--> standby. There is no communication between R3 and database. I have refered the Note 400241, have not got the solution. I changed the password of the OPS$ user uisng brtools utility. Still getting the r3trans return code 0012.
O/s-Windows 2003 server
DB- Oracle 10g
SAP ECC 6.0
Regards,
Nisar

Hi Nisar,
We would like to implement the data guard , the system landscapes are also similar to your site. Can u pls give me the documentation which explains step by step configuration. We are not able to activate oracle enterprise manager where the configuration is slightly simple. Is it possible to have the primary and standy database with same db_name?. Pls help to proceed further.
Regards
SK

SAP & Data Guard

hi,
i want to Data Guard on SAP. have you got any idea?
thanks.

Hi,
First read Dataguard documentation see below link
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d2827bef-0c01-0010-75a3-f96aa47fe920?overridelayout=true
SurendraJain

Install SAP ERP 6.0 with Linux and Oracle RAC

Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.

Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
    o You can use "Physical Standby".
    o You cannot use "Logical Standby".
    o You can use Data Guard Broker.
    o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
    o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende

SAP message Log

Does SAP maintain log of all the messages displayed on screen using MESSAGE statement?
We are investigating a problem and want to see the messages displayed by SAP during the time when problem occured.

We have custom development for picking and confirmation. Last week we found that in some deliveries there is difference in delivered quantity and packed quantity.
Custom development is calling sap-standard FMs. Problem occurs randomly, roughly 10 deliveries in a week has this problem.
We are still trying to investigate the reason that is causing the problem.
Custom program does display the message to user if FM raise any message. We asked user of they are getting any message while picking, and if they are ignoring it.
They just confirmed that they are getting message 'Packing Not Possible Since there is no Quantity to be Packed' and they did ignored this.

Rendering xml-table into logical filename in SAP R/3

Hi,
I am trying to translate an xml-table with bytes into a logical filepath in SAP R3.
Do I have to use the method gui-download or shall I loop the internal xml-table?
When I tried to loop the xml-table into a structure, and then transfering the structure into the logical filename, I get problems with the line breaks in my xml-file. How do I get the lines to break exactly the same as I wrote them in my ABAP-code?
Edited by: Kristina Hellberg on Jan 10, 2008 4:24 PM

I believe you posted in the wrong forum.
This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
Ludek

Manual de Integracao v300-2009-03-16 - SAP 4.7 SP30 preparado para NF-e?

Boa tarde,
Estou iniciando um projeto de implementação de MP135 + NF-e + SPED na versão 4.7 do SAP, este ambiente encontra-se atualizado com o SP30.
Gostaria de saber se é possível configurar a NF-e com base no novo layout definido no "novo" manual de integração do contribuinte (emitido em 16/03/2009) versão 3.00, a versão 4.7 com SP30 está preparada?
Como estamos iniciando a fase de blueprint, foi colocado por parte do cliente o interesse de implementação da NF-e com esta nova versão, permitindo desde já que a empresa emita NF-e já novo layout definido.
Desde já agradeço pela atenção,
Att,
André Teixeira

Bom dia André,
O projeto NF-e no R/3 4.7 tem como prerequisito mínimo o SP 30, conforme SAP Note 989115. Então você está tranquilo quanto a isso. Faça uma busca em XX-CSC-BR-NFE no market place filtrando este support package para obter a lista de notas que deverá aplicar em seu ambiente.
Fiz uma rápida análise no manual 3.0 e concluí que as principais modificações são relacionadas ao DANFE, que no manual 3.0 diserta sobre a possibilidade de impressão em formulário contínuo e também a diferença do DANFE em contingência. O novo manual aproveita para documentar novas rejeições, novos retornos de protocolo (adicionando valores para o SCAN/DPEC), e o consulta de cadastro de emissor (atualmente sem suporte).
O layout utilizado continuará sendo o 1.10, com mínimas modificações no domínio de alguns campos (ex.: bairro exige hj de 1 a 60 caracteres, está mudando para 2 a 60 caracteres).
Respondendo sua pergunta, a solução SAP/GRC pode emitir NF-e conforme este novo manual pois o layout 1.10 já é suportado, regras de validação deverão ser atualizadas no GRC para evitar falha de schema (215/225) na Sefaz.
Atenciosamente,
Fernando Da Ros

SAP On Dataguard

Similar Messages

Maybe you are looking for