SAP on Oracle RAC+ASM 11g - SWPM installation Option

Dear Experts,
I came across SAP Note 1977393 which is describing the installation steps of a RAC installation with SWPM with an example.
However, the note is not describing the exact preparation steps to be performed on the cluster nodes.
For example, the note doesn't describe if it's required to install the Oracle Grid Infrastructure on the Cluster Nodes before using the SWPM with the RAC+ASM option.
Thanks in advance.
Mohamed Awny

Hi Mohamed,
Details of selection parameters can be found in the link below
Installation of SAP on RAC with Oracle ASM
Additional useful documents for installation can be found in below link
SAP on Oracle Real Application Clusters (RAC)
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • SAP ON Oracle RAC

    Hi All,
    We are planing  to move our ECC production server to Oracle RAC (11g, Solaris) . If any one having idea about this, suggest how to proceed with oracle..
    Regards,
    Jithin M

    Hi Jithin,
    Please refer to below documentation for guidance
    SAP on Oracle Real Application Clusters (RAC)
    http://www.oracle.com/us/solutions/sap/wp-sap-rac-asm-adv-config-oct2012-1875141.pdf
    Regards,
    Deepak Kori

  • Install SAP cluster ORACLE RAC and SCS

    I need to install SAP ECC SR3 in an environment in cluster. 
    O.S: Linux Red Hat B.D: Oracle 10.2.0.4
    I am trying to follow the official manual of SAP, but this very confused, would like the you aid.
    The environment is the following one:
    2 machine (Node A and Node B)
    1 area of storage shared for datafiles of Oracle. /oracle/PRD.
    It goes also to be installed ORACLE RAC.
    My doubt is the following one: Which the steps that I have that to follow so that everything of certain.
    When I go to install ORACLE RAC? Before, later or during the installation of SAP?
    I go to need to install the central office services (SCS) in the two servers? Or only in one?
    Somebody could help with some document or detail me of what I go to need to make?
    Please! 
    Thanks!

    Hi Alan,
    Please go through this link [http://www.oracle.com/newsletters/sap/docs/wp-o10g-rac-config-unx.pdf] Hope this should help you.
    Thanks and Regards,
    Damanaidu J

  • Oracle rac templates 11g R2 buildcluster.sh error

    Hi All,
    am facing below error, while creating oracle rac templates. kindly let us know how to resolve below error.
    ===error=========================
    Oracle RAC 11gR2 OneCommand (v1.2) for Oracle VM - (c) 2010-2011 Oracle Corporation
       Cksum: [1170221909 255000 racovm.sh] at Sun Jan  5 04:15:14 EST 2014
       Kernel: 2.6.18-194.0.0.0.3.el5xen (i686) [1 processor(s)] 1700 MB
    2014-01-05 04:15:14:[printparams:Time :racnode1] Completed successfully in 4 seconds (0h:00m:04s)
    2014-01-05 04:15:14:[setsshora:Start:racnode1] SSH Setup for the Oracle user(s)...
    INFO (node:racnode1): Running as oracle: /u01/racovm/ssh/setssh-Linux.sh -s -x -c NO -h nodelist -p ***   (setup on 2 node(s): racnode1 racnode2)
    ERROR: Failed to create temporary file /tmp/setssh-cretmpQY3958 on localhost, can not proceed
    Exiting...
    ERROR (node:racnode1): Failed to configure passwordless SSH for the oracle user
    2014-01-05 04:15:17:[setsshora:Time :racnode1] Completed with errors in 3 seconds (0h:00m:03s), status: 1
    2014-01-05 04:15:17:[buildcluster:Time :racnode1] Completed with errors in 58 seconds (0h:00m:58s), status: 1
    thanks,
    Mike.

    Try this. It worked for me.
    Please keep in mind that you will need wait till each step finishes successfully before move to next one
    For Step1 and 2, you can skip node(s) on which you didn't execute root.sh yet.
    Step 1: As root, run "$GRID_HOME/crs/install/rootcrs.pl -verbose -deconfig -force" on all nodes, except the last one.
    Step 2: As root, run "$GRID_HOME/crs/install/rootcrs.pl -verbose -deconfig -force -lastnode" on last node. This command will zero out OCR and VD disk also.
    Step 3: As root, run $GRID_HOME/root.sh on all node one by one

  • Oracle RAC 10g/11g on Solaris 10 OS

    Hi Experts et all
    I am now pretty sure I am confusing my self a lot and probably this solution exist.. or may be not ..
    When we have an ACTIVE - PASSIVE Clustering of, say Veritas Cluster 5.0 on Solaris 10 OS running on SPARC Platform, could we configure an ACTIVE - ACTIVE Oracle database cluster on top of this?
    In other words , I will configrue Node A and Node B in ACTIVE-PASSIVE Configuration using VERITAS Cluster. Then I will want to configure many oracle database on it in such a way that its running on Node A as well as on Node B. Is this possible ? How does the Oracle configuration change here if it is possible?
    I understand that for a database to be ACTIVE, its instance needs to be accessing data files, control files and redo log files continuously.
    So if the Oracle database is to be in ACTIVE-ACTIVE Cluster, all its instances should also be accessing necessary filesystems which have these files.
    When OS Admin says that it is ACTIVE - PASSIVE Clustering from Veritas, I understand the Filesystems are not accessible from Passive node. So I am not able to understand how can the database be active on that node. Is it possible?
    Please share your thoughts, ideas, experiences.. etc.
    Regards!
    Sarat

    Yes.. I absolutely agree with you.. If I need to run ACTIVE - ACTIVE Databases, I must have all these resources available on all clustered nodes. In other words, the OS cluster Solution should also be an ACTIVE - ACTIVE. At least, I will need to use oracle clusterware and configure database on ASM and to make sure we have hardware to support this functionality before hand, if the cluster filesystems are not available.
    When I modify this approach a little bit, I could go ahead configure ACTIVE - ACTIVE Solaris or Veritas Clusters (if thats okay with the clients in terms of cost), and use clusterware additonally before configuring ACTIVE - ACTIVE RAC databases. I will have all databases required by the application to run multiple instances on the cluster. In other words ACTIVE - ACTIVE every thing until the database layer and let the application use them as it would require.
    JDBC Drivers could be a worry factor. I believe the JDBC used by websphere applications behave like thin clients and hence will not be able to utilize the features like load balencing, TAF which are fascinating features Oracle 10g RAC has provided. Perhaps, if I could try get these websphere app behave just like an oracle client/thick client, would be a better answer but these questions will need to go to websphere folks ..
    just in case if one of you have seen this happening?
    I learned some time ago... "Administrators should never leave their hope ..there could always be a new learning round the corner" :-)
    Heartfelt thanks.
    Sarat

  • Oracle BPA architect 11g Silent Installations on windows

    hello,
    how can I make a silent install of Oracle business process architect on Windows XP ?
    (I think it can be done using an XML file, if so, thank you for giving me the file silent.xml and the procedure to do the installation of Oracle business process architect iin silent mode on Windows).
    Thank you for your help

    Hello,
    In fact, I found a difficult in installing the BPA publisher 11g. I did like mention in the oracle guide for installation but when i am adaptating the files , i cannot found the XML files?
    Do u think that way is not necessary fot the BPA Publisher 11g??
    Thanks

  • Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
    When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
    Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
    specific settings in Oracle RAC setup for performance evaluations?
    Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
    balancing)
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
    Edited by: user2033016 on Jun 29, 2011 10:02 PM

    user2033016 wrote:
    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
    which documentation you have followed?

  • Restore DB13 Oracle backup of RAC+ASM to Standalone server with ASM only

    Dear Experts,
    My SAP ECC System is on Oracle 11g with RAC on ASM. I am taking the backup using DB13 with init<SID>.sap profile as attached.
    I want to restore this backup on single node System with only ASM(no RAC). (ASM File system structure remains the same)
    As per my finding and as per Note 1627541 - BR*Tools support for Oracle ASM and Exadata/ODA, it says use only BRRECOVER to restore the database.
    Can anyone please assist me, in restoring the database. As in step by step commands or points to follow the restore.
    Thanks,
    KK

    Hi Yayati,
    Please refer to SAP guidelines on the configuration for using brtools on Oracle RAC + ASM
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0063fdad-49f6-2e10-22bc-
    c8c4c7f9e055?QuickLink=ora&ov…
    Additional configuration information can be checked under SAP note
    Note 1598594 - BR*Tools configuration for Oracle inst. under "oracle" user
    you need to adapt your init<SID>.sap file according to the recommendations suggested.
    Post this you may use brtools to backup and perform restoration as well.
    Hope this helps.
    Regards,
    Deepak Kori

  • Oracle RAC 11g on  EL5/XEN/NFS

    I have written a small article on my Linux/Xen para-virtual based RAC 11g system
    http://boulayp.free.fr/articles.php?lng=fr&pg=170

    user2033016 wrote:
    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
    which documentation you have followed?

  • Oracle RAC 11g - Transition queries

    Hi,
    I am about to get transition on Oracle databases used currently by one of the client managed by another vendor.
    I would like to I have a check list sort of thing for getting transition on Oracle RAC 11g r2 from the current vendor.
    Appreciate if anybody can help me on this asap.
    Thanks in advance.

    user2033016 wrote:
    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
    which documentation you have followed?

  • Domain migration of Oracle RAC nodes on windows 2008

    Hello masters,
    We are planning to migrate servers from old domain to a new domain due to company name change. That is, our DB servers named like db-node-x.old-domain.com will be migrated to db-node-x.new-domain.com. The servers are all on Windows 2008 R2 and Oracle RAC 11g2. As dba, i have no idea about what will happen to DBs. Please let me know any possible solutions?
    Thanks in advance.

    user2033016 wrote:
    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
    which documentation you have followed?

  • RAC database software silent installation

    Hello,
    Could you please share an example of response file content for an Oracle RAC 11gR2 database software installation using ASM (Redhat Linux) ?
    thank you,
    S

    Hi,
    have you checked the Doc Id :Grid Infrastructure Redundant Interconnect and ora.cluster_interconnect.haip (Doc ID 1210883.1)

  • Oracle RAC on VMWare vs. Virtualbox

    hello,
    has anyone tested Oracle RAC DB 11g performance on VMWare server and on Virtualbox?
    I wonder which virtual solution is faster.

    I have created several Virtual Machines on my laptop using both VMWare Server 2 and Virtual Box (various versions utilized over time). I have found that the memory overhead of Virtual Box is lower then that of VMWare Server can not answer why I can jsut say that I have more free memory with Virtual Box then with VMWare Server 2 when using Virtual Machines with same configuration. On my Laptop I have not noticed a large performance difference between virtual box and VM Ware Server for Virtual Machines of like resource allocation and activity types, the performance appears to vary more by the resource consumption and activity executing within the VM. If I had to give a gut feel for an overall local VM tool, I like virtual box better then VMWare Server. I also see Virtual Box Updates coming, however not seen an update to VM Ware Server in a while. Hope this helps

  • Oracle RAC certification

    hi all ,
    i have OCA and OCP certification for database administrator 10g , i need to take oracle RAC certification 11g
    what is the best scenario should i do .

    Your best option would probably be to upgrade your 10g DBA OCP to 11g DBA OCP with exam 050, then move to 11g RAC with exam 058. This way you do not have to complete additional training.
    Regards,
    Brandye Barrington
    Certification Forum Moderator

  • Enterprise User Security (EUS) with Oracle RAC database

    Hi all,
    i'm experiencing a problem configuring centralized AAA on Oracle OID for Oracle RAC Database.
    My environment is:
    1) Oracle OID 10g (192.168.15.245 - rh4oidserver.klab.it)
    2) Oracle RAC database 11g
    I successfull configured a standalone Oracle Database to authenticate user in OID centralized repository, but i'm experiencing different problem to do, with RAC, same things.
    In dept:
    1) Oracle RAC works correctly and internal user (SYS,Oracle, ecc.) are correctly authenticated and authorizated against database
    2) Oracle RAC register himself in OID (see attached snapshoot)
    3) I run sqlplus to connect on Oracle RAC using OID users and i get following error: ORA-28030 Server encountered problems accessing LDAP directory service
    Using a sniffer, i can see a reset message after SSL handshake (SSL v3 encrypted alert), but i don't undenstand root cause....
    Host file on RAC server is:
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1          localhost.localdomain localhost
    ::1          localhost6.localdomain6 localhost6
    # Public
    192.168.15.177          orclrac1.klab.it orclrac1
    192.168.15.178 orclrac2.klab.it orclrac2
    #Private
    192.168.1.100          orclrac1-priv.klab.it orclrac1-priv
    192.168.1.105 orclrac2-priv.klab.it orclrac2-priv
    #Virtual
    192.168.15.88 orclrac1-vip.klab.it orclrac1-vip
    192.168.15.96 orclrac2-vip.klab.it orclrac2-vip
    92.168.15.184 openfiler.klab.it openfiler
    192.168.1.90 openfiler-priv.klab.it openfiler-priv
    192.168.15.246     acti.klab.it acti
    #192.168.1.245 rh4oidserver.klab.it rh4oidserver
    192.168.15.245 rh4oidserver.klab.it rh4oidserver
    tnsname.ora is:
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    RACDB1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = racdb.klab.it)
    (INSTANCE_NAME = racdb1)
    RACDB =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac2-vip)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = racdb.klab.it)
    LISTENERS_RACDB =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac2-vip)(PORT = 1521))
    RACDB2 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac2-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = racdb.klab.it)
    (INSTANCE_NAME = racdb2)
    ldap.ora is:
    # ldap.ora Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/ldap.ora
    # Generated by Oracle configuration tools.
    DIRECTORY_SERVERS= (rh4oidserver.klab.it:389:636)
    DEFAULT_ADMIN_CONTEXT = "dc=dbtest101,dc=klab,dc=it"
    DIRECTORY_SERVER_TYPE = OID
    sqlnet.ora is:
    # sqlnet.ora.orclrac1 Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora.orclrac1
    # Generated by Oracle configuration tools.
    NAMES.DIRECTORY_PATH= (LDAP,TNSNAMES)
    WALLET_LOCATION =
    (SOURCE =
    (METHOD = FILE)
    (METHOD_DATA =
    (DIRECTORY = /u01/app/oracle/admin/racdb)
    listener.ora is:
    # listener.ora.orclrac1 Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora.orclrac1
    # Generated by Oracle configuration tools.
    LISTENER_ORCLRAC1 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521)(IP = FIRST))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.15.177)(PORT = 1521)(IP = FIRST))
    LISTENER_ORCLRAC2 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = orclrac1-vip)(PORT = 1521)(IP = FIRST))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.15.178)(PORT = 1521)(IP = FIRST))
    Thank's in advance for any help or suggestion.
    Antonio

    Hello bipkary,
    what version are you using?
    the following link tells you everything about EUS in oracle10g R2:
    http://download.oracle.com/docs/cd/B19306_01/network.102/b14269/toc.htm

Maybe you are looking for