SAP on SOLARIS on VMWare -- DELL ?

Friends, I noticed that Dell does not have hardware certified to run SAP on Solaris -> http://www.saponsolaris.com/hwlist.html
However I have a quest that requires SAP -> on Solaris -> on DELL
One of the solutions was virtualized Solaris and install SAP on Solaris: SAP -> on Solaris -> on VMWare -> on DELL
In the topic below there is a mention that SAP does not support this type of installation, but without any reference to any SAP Note:
ERP6 EHP4 SOLARIS 10 Sparc,Oracle 10g in a virtual envirn swap size requir
Do you know any case that could help me?
thank you

If I understand the license policy of Oracle Solaris properly, the only valid way of running Solaris entitled is on hardware you bought by Sun/Oracle.
There is no note because it is not supported. There are no Solaris specific VMWare tools available, there will be no integration in the monitoring becaues of that and hance it's not supported officially.
We had likewise problems and we will switch all Solaris boxes to Linux subsequently.
Markus

Similar Messages

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

FANAQ: Solaris 8 on Dell CPx

This is one of those Frequently Asked but Never Answered Question. I am having problem with install Solaris 8 on my new Dell CPx. The frist problem seems to be that the Solaris kernel does not recognize the system keyboard. I was able to use USB keyboard to perform installation ok, but when I booted it up, I endup with a blank screen even with the USB keyboard. I guess I may have to solve these problems one by one. I know that Sun has a translate program that translate Linux dev. drivers to Sun driver. So if someone can point out what missing driver could cause the keyboard problem, I may try to work that first, then bit-by-bit, I hope I can have Solaris 8 running on Dell Laptop.
Of course, if someone has already installed solaris 8 on Dell CPx, I'm glad to learn the tricks.
thanks.
steve

dont think so..not for the 7500. post here if you get it working for the 7500.

Solaris 9 on Dell Power Edge 6650 x86 system

Does anyone have driver for PERC3 controller for Solaris 9, which comes with Dell Power Edge 6650?? We are tring to install Solaris 9 on Dell Power Edge 6650. The error we get is "No Hard Disks Fount".
Thank U!

After thrashing for 2 weeks with the onboard 7880 SCSI and onboard 7890 RAID controllers, I was finally able to load up Solaris 8 on a Poweredge 2400. (4/01 build)
The only way I was able to do it was configure the server as below:
7880 SCSI: CD-ROM drive only device on this controller, set to ID 5.
7890 RAID controller: Disabled. Dont' believe Dell or Adaptec, this card will not work with Solaris 7 or 8. Even with the RAID chip removed and running as standard SCSI controller, it still would not work.
Adaptec 2940 U2W: 9G Quantum Atlas V drive with HP SureStore DAT 24i drive.
PERC II RAID controller yanked out of older 4100 system, 3 drives running RAID 5.
Important note: Do not attach anything to the 7880 controller besides the CD. The system will not boot if attempting to boot to the HD or if you attempt to boot from CD, it will hang at the adp.bef file.
Hope this helps..
Mike

Installation Of Solaris In VMware

Hi,
I have a query.
What is the advantages and disadvantages of running any operating system (for eg: SOLARIS) in VMWARE(virtual machine) running on other Operating System(for eg: Windows XP).

I would suggest that you simply lump / and /usr together into at least an 8-10GB space. This assumes that you are installing an entire distribution cluster (SUNWCall or SUNWCXall). I have built some security hardened loads that require < 2GB and I'm sure I could get the footprint smaller if I had to.
I don't recall the size of an entire distribution on x86, but thought it was around 5GB for Solaris 10 for combined root and /usr.
Cheers,

Help install solaris 10 on dell 430SC

tried without success install solaris 10 on dell 430SC.
the installation hangs at the very begining with no
appreant errors . any suggestions?thanks.

I couldn't get Solaris 10 to install.
However, I downloaded the Solaris express 11 b24 and that installs fine. It runs the 64 bit kernel :) No problems so far.
The graphics for the SC430 is a little odd. We use the SUN window system (not XOrg) and select the XF84Intel driver for the card. This works fine, trouble is it tends to like to start in a very high res mode i.e 1600xmnnnn. Run KDM config and drop the resolution.
This release uses the grub boot loader which is different but good.
Best of Luck

SAP on solaris x86 or sparc

Hi,
Can you please let me know the advantages of running SAP on Solaris X86 or SPARC machines. Which is recommended?
Thanks
Joyce

> If the compnay has very few end users to work on SAP i.e. less than 50 users, then x86 is suited.
> FOr large ended systems that is for large number of users to work on SAP, SPARC is better choice.
> SPARC is recommended.
I'm sorry but this is simply not true.
x86_64 is VERY suited for big systems, we run x86_64 systems with 1000+ users, on Solaris and on Linux.
Solaris on x86_64 is a very good choice, a mature OS with lots of features (zones, ZFS...) running on affordable hardware.
SPARC is a RISC architecture, there are even drawbacks in performance if you use e. g. T-series systems (UltraSparc) for ABAP systems and databases (see Oracle Metalink ID 781763.1 - "Migration from fast single threaded CPU machine to CMT UltraSPARC T1 and T2 results in increased CPU reporting and diminished performance").
So it's a matter of taste and choice - and money.
Markus

Help! Can'i install Solaris 9 on Dell Laptitude LS

Can'i install Solaris 9 on Dell Laptitude LS. Setting of video card and monitor fail.
My configuration is:
P3 450
128MB
MagicMedia 256 AV video and sound card.
Monitor unknown with 800*600 resolution.
Anyone has idea about that. Thanks!

Yes, OS 9 is PPC architecture only. The only way I can think of that you could possibly run it would be to download PearPC (A PPC architecture emulator-http://pearpc.sourceforge.net/) off of Windows (which is officially unsupported on Apple machines to begin with), and then attempt to run OS 9 off of PearPC.
The program is rather slow, and as you can see, the process is really quite time consuming, illogical (three different systems, one running in emulation), and definitely not worth the end result.
Good Luck,
DV Guru

Install SAP on Solaris

Hi all,
I can install SAP on Windows and Linux, but now i want to install SAP on solaris,
Can anyone know how to install or provide me the SAP Note #
I have no idea about solaris.
regards
Imran Khan

import_monitor.java.log
"java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Import Monitor jobs: running 1, waiting 25, completed 2, failed 0, total 28.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 25, completed 2, failed 1, total 28.
Import Monitor jobs: running 1, waiting 24, completed 2, failed 1, total 28."
import_monitor.log
INFO: 2009-06-08 19:35:53
Import Monitor is started.
CONFIG: 2009-06-08 19:35:53
Application options:
dbCodepage=4102
dbType=ORA
ddlMap=ddl_mapping.txt
extFiles=yes
importDirs=/oracle/dump/d51033500_1/EXP1:/oracle/dump/d51033500_1/EXP2:/oracle/dump/d51033500_1/EXP3:/oracle/dump/d51033500_1/EXP4:/oracle/dump/d51033500_1/EXP5:/oracle/dump/d51033500_1/EXP6:/oracle/dump/d51033500_2/EXP7:/oracle/dump/d51033500_2/EXP8:/oracle/dump/d51033500_2/EXP9:/oracle/dump/d51033500_2/EXP10:/oracle/dump/d51033500_2/EXP11
installDir=/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS
jobNum=1
loadArgs=-stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=/usr/sap/DEV/SYS/exe/run/R3load
sapinst=
trace=all
tskFiles=yes
CONFIG: 2009-06-08 19:35:53
List of packages with table structure: 'SAP0000'.
CONFIG: 2009-06-08 19:35:53
List of packages with views: 'SAPVIEW'.
TRACE: 2009-06-08 19:35:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is started.
INFO: 2009-06-08 19:35:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
TRACE: 2009-06-08 19:35:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL' template file is started.
INFO: 2009-06-08 19:35:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
TRACE: 2009-06-08 19:35:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is started.
INFO: 2009-06-08 19:35:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2009-06-08 19:35:54
Data codepage 1100 is determined using TOC file '/oracle/dump/d51033500_1/EXP1/DATA/SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2009-06-08 19:35:58
Version table 'SVERS' is found in STR file '/oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2009-06-08 19:35:58
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file '/oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2009-06-08 19:35:58 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2009-06-08 19:35:58 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPNTAB' import package:
/usr/sap/DEV/SYS/exe/run/R3load -ctf I /oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
TRACE: 2009-06-08 19:35:59 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i SAPNTAB.cmd -dbcodepage 4102 -l SAPNTAB.log -stop_on_error
INFO: 2009-06-08 19:55:40 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is successfully completed.
TRACE: 2009-06-08 19:55:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2009-06-08 19:55:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC' import package:
/usr/sap/DEV/SYS/exe/run/R3load -ctf I /oracle/dump/d51033500_1/EXP1/DATA/SAPSSEXC.STR /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL SAPSSEXC.TSK ORA -l SAPSSEXC.log
TRACE: 2009-06-08 19:55:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error
ERROR: 2009-06-08 21:43:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process '/usr/sap/DEV/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error' exited with return code 1.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2009-06-09 11:11:09
Import Monitor is started.
CONFIG: 2009-06-09 11:11:09
Application options:
dbCodepage=4102
dbType=ORA
ddlMap=ddl_mapping.txt
extFiles=yes
importDirs=/oracle/dump/d51033500_1/EXP1:/oracle/dump/d51033500_1/EXP2:/oracle/dump/d51033500_1/EXP3:/oracle/dump/d51033500_1/EXP4:/oracle/dump/d51033500_1/EXP5:/oracle/dump/d51033500_1/EXP6:/oracle/dump/d51033500_2/EXP7:/oracle/dump/d51033500_2/EXP8:/oracle/dump/d51033500_2/EXP9:/oracle/dump/d51033500_2/EXP10:/oracle/dump/d51033500_2/EXP11
installDir=/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS
jobNum=1
loadArgs=-stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=/usr/sap/DEV/SYS/exe/run/R3load
sapinst=
trace=all
tskFiles=yes
CONFIG: 2009-06-09 11:11:09
List of packages with table structure: 'SAP0000'.
CONFIG: 2009-06-09 11:11:09
List of packages with views: 'SAPVIEW'.
TRACE: 2009-06-09 11:11:09 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is started.
INFO: 2009-06-09 11:11:09 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
TRACE: 2009-06-09 11:11:09 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL' template file is started.
INFO: 2009-06-09 11:11:09 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
TRACE: 2009-06-09 11:11:09 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is started.
INFO: 2009-06-09 11:11:09 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2009-06-09 11:11:10
Data codepage 1100 is determined using TOC file '/oracle/dump/d51033500_1/EXP1/DATA/SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2009-06-09 11:11:15
Version table 'SVERS' is found in STR file '/oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2009-06-09 11:11:15
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file '/oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2009-06-09 11:11:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2009-06-09 11:11:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error
ERROR: 2009-06-09 11:11:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process '/usr/sap/DEV/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2009-06-09 11:11:39 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is started.
TRACE: 2009-06-09 11:11:39 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'DOKCLU' import package:
/usr/sap/DEV/SYS/exe/run/R3load -ctf I /oracle/dump/d51033500_2/EXP11/DATA/DOKCLU.STR /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL DOKCLU.TSK ORA -l DOKCLU.log
TRACE: 2009-06-09 11:11:40 com.sap.inst.migmon.LoadTask processPackage
Loading of 'DOKCLU' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i DOKCLU.cmd -dbcodepage 4102 -l DOKCLU.log -stop_on_error
INFO: 2009-06-09 11:42:52 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is successfully completed.
TRACE: 2009-06-09 11:43:10 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2009-06-09 11:43:10 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL2' import package:
/usr/sap/DEV/SYS/exe/run/R3load -ctf I /oracle/dump/d51033500_2/EXP8/DATA/SAPAPPL2.STR /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL SAPAPPL2.TSK ORA -l SAPAPPL2.log
TRACE: 2009-06-09 11:43:16 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error
ERROR: 2009-06-09 11:49:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process '/usr/sap/DEV/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error' exited with return code 1.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2009-06-09 11:58:24
Import Monitor is started.
CONFIG: 2009-06-09 11:58:24
Application options:
dbCodepage=4102
dbType=ORA
ddlMap=ddl_mapping.txt
extFiles=yes
importDirs=/oracle/dump/d51033500_1/EXP1:/oracle/dump/d51033500_1/EXP2:/oracle/dump/d51033500_1/EXP3:/oracle/dump/d51033500_1/EXP4:/oracle/dump/d51033500_1/EXP5:/oracle/dump/d51033500_1/EXP6:/oracle/dump/d51033500_2/EXP7:/oracle/dump/d51033500_2/EXP8:/oracle/dump/d51033500_2/EXP9:/oracle/dump/d51033500_2/EXP10:/oracle/dump/d51033500_2/EXP11
installDir=/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS
jobNum=1
loadArgs=-stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=/usr/sap/DEV/SYS/exe/run/R3load
sapinst=
trace=all
tskFiles=yes
CONFIG: 2009-06-09 11:58:24
List of packages with table structure: 'SAP0000'.
CONFIG: 2009-06-09 11:58:24
List of packages with views: 'SAPVIEW'.
TRACE: 2009-06-09 11:58:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is started.
INFO: 2009-06-09 11:58:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
TRACE: 2009-06-09 11:58:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL' template file is started.
INFO: 2009-06-09 11:58:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA_LRG.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
TRACE: 2009-06-09 11:58:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is started.
INFO: 2009-06-09 11:58:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of '/tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2009-06-09 11:58:24
Data codepage 1100 is determined using TOC file '/oracle/dump/d51033500_1/EXP1/DATA/SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2009-06-09 11:58:30
Version table 'SVERS' is found in STR file '/oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2009-06-09 11:58:30
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file '/oracle/dump/d51033500_2/EXP10/DATA/SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2009-06-09 11:58:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2009-06-09 11:58:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error
ERROR: 2009-06-09 11:58:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process '/usr/sap/DEV/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2009-06-09 11:58:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2009-06-09 11:58:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
/usr/sap/DEV/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error

Can't install Solaris 10 on DELL VOSOTRO 200 ?

Hi All,
I am new to SOLARIS, and wanted to play with it.
I tried to install Solaris 10 ON dell VOSOTRO 200 and it does not install at all. It gets stuck at the very first place. I tried open solaris and Solaris in all different ways, CD/DVD/USB.
I used the same CD/DVD in Emachine and they get install just fine. Is solaris not compatible to DELL VOSOTRO? Or am I doing something wrong ?
Any answer would be appreciated.
Thanks,
Envrionment
SOLARIS 10, 32 Bit.
DELL VOSOTRO 200
Thanks,
jfk

Hi, I had a similar problem when I tried to Install Solaris X86 on an HP Proliant DL586g2. You'll probably find the problem Is that you need to Install some drivers first to enable the Installation. If you need more specific details I can probably find a guide on how to do this. But I'm certain It Is possible to run Solaris on the Dell It just might take a bit of perseverance.
Good luck

Solaris 10 on Dell Dimension 4300

After initial install Solaris 10 on Dell Dimension 4300 (Pentium 4 1.6GHz, 512MB RAM), when system first reboot, I got error message:
Configure IPv4 interface: Segamentation Fault
elxl0
..... can not assign request address.
So I have manualy asign IP address when system boot up, what was wrong ?
Thanks.

I remember that a similar problem was reported on the solarisx86 mailing list, in an old build of solaris 10:
http://groups.yahoo.com/group/solarisx86/message/3456
What version of Solaris 10 are you using? The current build is s10_55, Solaris Express 5/2004.
Apparently there was a problem with /sbin/ifconfig or /sbin/mount crashing at boot time, when /usr was
on a separate filesystem, and some naming serverice was consulted (?). (bugid 4853968).
The workarounds are apparently:
- don't use a separate /usr filesytem, or
- use numeric IP addresses in /etc/hostname.interface files

SAP IDES installation in a DELL Inspiron 3537 i3 - 4th Gen DOS Operated

Hi Experts,
I am going to buy a DELL inspiron 3537 15 inches 4th Gen. i3 -4010 U processor, DOS operated RAM - 8GB, HDD - 750 GB or 1 TB.
I need to install latest SAP IDES version in this laptop (both type of access, directly from laptop or Virtual/Remotely).
Does DOS operated system supports SAP IDES installation?
Can we install SAP IDES on Windows 8.1 or DOS is mandatory?
Kindly suggest at earliest as I need to buy it by today or tomorrow.
Thanks in advance.
Regards,
Sandeep

Dear Sandeep
on windows 8.1 we are not able to install sap exports bcaz win 8.1 is operating system but we need server operating system to install sap which are window 2003,2008,2012 if you purchase win 8.1 license version you have to format whole laptop and license version will be of not use
there is option if you want run you sap on VMWARE (virtual machine) then it possible that you can use it on win 8.1 laptop bcaz vmvare open new operating system on existing win 8.1
Thanks

Does SAP support Solaris 10 ZFS filesystem when using DB2 V9.5 FP4?

Hi,
I'm installing NW7 (BI usage). SAPINST has failed in the step "ABAP LOAD due to the DB2 error message
"Unsupported file system type zfs for Direct I/O". It appears my Unix Admin must have decided to set these filesystems as ZFS on this new server.
I have several questions requiring your expertise.
1) Does SAP support ZFS filesystems on Solaris 10 (SPARC hardware)? I can not find any reference in SDN or Service Market Place? Any reference will be much appreciated.
2) How can I confirm my sapdata fielsystems are ZFS?
3) What actions do you recommend for me to resolve the SAPINST errors? Do I follow the note "Note 995050 - DB6: NO FILE SYSTEM CACHING for Tablespaces" to disable "Direct I/O" for all DB2 tablespaces? I have seen Markus Doehr's forum Link:[ thread|Re: DB2 on Solaris x64 - ZFS as filesystem possible?; but it does not state exactly how he overcame the error.
regards
Benny

Hi Frank,
Thanks for your input.
I have also found the command "zfs list" that would display any ZFS filesystems.
We have also gone back to UFS as the ZFS deployment schedule does not meet this particular SAP BW implementation timeline.
Has any one come across any SAP statement that states NW7 can be deployed with ZFS for DB2 database on Solaris SPARC platform. If not, I'll open an OSS message.
regards
Benny

Bank Statement management in SAP B1 on a VMWare Windows 2008 server

Hi everybody,
One of our customer is using a VMWare Windows 2008 server with SAP B1.
Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
Everything including bank statements transfer was working very fine on a "real" server before new implementation.
When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
"JAVA Virtual Machine Launcher : could not find the main class : program will exit."
JAVA is well installed on the VMWare server.
We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
Does anybody already have this problem with Integration Platfom on VMWare server ?
Is there a solution to our problem ?
Thanks for all your contributions.
Best regards.
Michel

Hi Michel,
First of all, your PL is too low. AFAIK, the first supported PL for 2007A SP00 is PL30. You may upgrade your PL first to see if that is a bug or not.
Thanks,
Gordon

Solaris 8 on Dell Inspiron 3500 ?

Hi!
Is there anyone who successfully installed Solaris 8 on a Dell Inspiron 3500 laptop? The problem is with the video card (NeoMagic) which is not automaticaly recognized by Solaris installer.
Thanks for any advices,
Claudiu

I am trying to install on a Dell Latitude laptop. I cant get very far though. Please see below:
I'm quite familiar with Solaris 8 and have done numerous installs
including dual boot on x86, and jumpstarts on Ultras.
I am trying to install x86 on a Dell laptop. No problems with setting up
the bios, and telling it to boot into the Solaris install menu. (from 1
of 2 cd)
My problem is this:
When I get to the language preference question, my keyboard mapping is
shot. I've tried numlock off and on, and used 3 different keyboards.
Laptop keyboard out of docking station, and two different keyboards
while the Dell is docked.
Funny thing is, the mapping is fine until the point where the install
program wants language preferences entered. I tried various keys and the
whole mapping of the keys on the board is off.
As I mentioned, in the earlier phase of the install program, when it
asks if you want Jumpstart, the mapping is fine. I did not have this
problem on my x86 install on my tower, (same keyboard tested as bad on
the Dell) and used the exact same cd's (1 of 2) that sun sent.
So I tried to configure Jumpstart to get around the mapping. Booted the
Dell bios to boot from the network using BOOTP, which is the core
protocol that Jumpstart uses. No go. Used the procedure from the Sun
Admin 2 class, it is proven to work on an Ultra environment. No go on
x86 though.
Any suggestions?
Thanks much,
Sam

SAP on SOLARIS on VMWare -- DELL ?

Similar Messages

Maybe you are looking for