SAP on XServer with Virtualisation

Hi Everybody,
Does anybody have any positive or negative experience with running SAP software - particularly ECC 6.0, both ABAP and Java stack on an Intel XServer? No - not for production use - but for small development environments...
Regards
Andrew

Hi,
I am thinking to install a development environment in an Xserver with virtualization... Did you finally installed?
What is your feedback?
Regards,
Antonio

Similar Messages

Send/Receive IDOCs (XML) from/to SAP R/3 with XI-SOAP without XI!

Dear SAP specialists,
(BACKGROUND) We are using the Microsoft BizTalk Adapter for SAP 1.0, developed on top of the SAP DCOM Connector (we are using the version 6.20 Patch Nr. 177), with Microsoft BizTalk Server 2002 SP1 in order to send and receive IDOC via the tRFC transport protocol. We are using the Microsoft BizTalk Adapter for SAP 1.0 since February 2002, and today we are exchanging more than 25,000 IDOC/day with this architecture.
When we migrate our SAP R/3 system to the version 4.7 with WAS 6.20, I was very enthusiastic about the possibility of sending the IDOC in XML via the standard HTTP transport protocol, because it would considerably simplify my architecture, i.e. no need of any (expensive) adapter any more! But, I had to realise that the quality of service exactly once will not be there anymore with HTTP as it exists with tRFC. Then, we carry on using the tRFC transport protocol with the adapter.
(QUESTION) But recently, I followed the SAP Course TBIT40 XI Foundations and I learn that:
1. On one hand, the XI-SOAP protocol supports the quality of service exactly once by the usage of a message GUID within the XI-SOAP envelope;
2. On the other hand, all mySAP solutions using WAS 6.20 (or higher) carry a small Integration Engine (with XI-SOAP as the native transport protocol).
Then, my question is: << Is it possible to exchange IDOC (XML) directly with an SAP R/3 4.7 (WAS 6.20) via the XI-SOAP transport protocol using the small Integration Engine embedded into it, with the quality of service exactly once? >>
Many thanks in advance and best regards,
Patrice Krakow

Hello Patrice
We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
Since your que is three years old, I'm sure you must have found some method for this.
We'll highly appreciate your help.
Regards: Gaurave

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to take the data from excel list to sap r/3(with time interval)

hi experts,
   how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.

Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '500'
      giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva

Integrate data from SAP R/3 with iDOC

Hi,
I need extract data from SAP R/3 with the iDoc method, but I can't found documentation from oracle where explain it how do it?, just I know that for this method ODI use two agent (OdiSAPALEServer and OdiSAPALEClient) and they are part of Open Connector for SAP R/3, so anybody that can help me with this issue?, I will be very grateful, just I need some orientation about how to do it?, for example, I need to be clear if the Open Connector for SAP R/3 is part of ODI or I need iinstall other special connector, etc.
I will be expecting for any answer that can help me.
Best regards

Hi Rodrigoalegrem,
Below llink will helps you for
*Oracle Data Integrator
Getting Started with SAP ABAP ERP Adapter
10g Release 3 (10.1.3)*
URL: http://www.oracle.com/technetwork/middleware/data-integrator/overview/odigs-sapabap-168070.pdf
Regards,
Phanikanth

Not able to connect SAP through internet with Windows 7 OS

Hi,
I am trying to use use latest version of SAP GUI 720 with Windows 7 Home Edition.
When I am connecting through Local Area Connection I am able to connet to the sap servers.
But when I am trying to connect through Internet with sap router string it displays error
"""""hostname 'mypublicip/s/3299/w/solman' unknown
Check your application server name
Do you want to see the detailed error desciption?
Yes/No """""
With same router string I am able to connect to SAP server through internet on Windows XP pro.
Does SAP router string needs some modification for Windows 7?
Kindly help.
With Best Regards,
Rajkumar

hi,
Can you try to input the private ip address of the SAP router server instead of the public. Client should be connected in your network.
Thanks.
newbie

Integrating with SAP CRM / SAP ECC apps with SMP 3.0

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

SAP AUTO ID with screen shots.

Is there any step by step scenario,where we can understand about SAP AUTO ID with screen shots.

Hello PSRK,
Please note the Outbound Delivery scenario to be used here is the Slap & Ship Outbound Scenario
which only uses SAP AII.
Steps in the same will be:
1) Maintain ID settings - Defauly ID version - spro - aotu id - basic settings - id settings - default id version
2) Maintain Products - spro -auto id - master data + sap easy access -- auto id -- master data
3) Maintain Devices - spro - -auto id master data + sap easy access -- auto id -- master data
4) Maintain number ranges - spro --auto id master data + sap easy acccess - auto id -- master data
5) Maintain Rules - spro - auto id - Rules
6) Maintain activities - spro - auto id - Activities
7) Maintain Locations - easy access - master data
8) Maintain Conditions spro - auto id - conditions
9) RFC for simulating device controllers - sm59
10 ) then use auto id test tool - easy access - auto id - tools -auto id
Thnks

No receiver could be determined while doing SAP ECC Integraion with MDM 7

Dear All,
Can you please help me to resolve the following issue.
We are doing SAP ECC Integration with MDM 7.1 by using MDM PI Adapter.
Source side we are processing MATMAS.MATMAS05 IDoc and Receiver side we are using MDM PI Adapter to Connect the MDM System.
I have checked the Configuration by using Test Configuration Wizard, it showing every thing fine there.
Is it because of any network connection issue at the Target system (MDM) side?
Plz check the error message for your reference;
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Mahesh

Hi,
From error looks like it is not failing at receiver determination step. if you all configurations are fine, then this could be because of system cache refresh.
Go to Edit mode in your scenario and again save it and activate it. Do a cache refresh and check if it works.
Regards,
Shiv

SAP GTS------- SAPPI with Seeburger BIC----- ATLAS using with SAP PI

Hi All,
I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
Regards,
Ramesh

>
Ramesh Gulipalli wrote:
> Hi All,
>
> I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
>
> 1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
> 2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
>
> How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
>
> Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
>
> For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
>
> Regards,
> Ramesh
> .
for converting an XML to EDI or vice versa you can use the seeburger adapter.
http://www.seeburger.com/xi-pi-adapters/

Is it possible to directly connect two Xserves with a Promise VTrak E610fD via Fibre?

I have two Xserves and I'd like to connect them with a Promise VTrak E610fD. As this storage has two controllers, I'd like to connect both Xserve with both controllers. Is this setup possible? Can I access (read and write) the same disk array with both Xserves simultaneously (Xsan?) or do I have to create two separate arrays?

Hello bleistift, and welcome to the AppleBoards,
Fibre channel is SCSI which means that any device connected by fibre assumes it is in sole control of that device. When you attach more than one machine via fibre both machines assume they are in control and unexpected behaviors and data corruption ensues. SAN (like Apple's XSAN) provides a layer of arbitration over the shares allowing multiple fibre connections to play nicely with one another while still being connected over fibre.
You could easily connect two machines to a single RAID box if they are accessing different RAID volumes at the same time, but once you start connecting to the same data at the same time you need SAN.
HTH,
=Tod

Restiction on SAP Lumira user with BI_DATA_ANALYST role

Hi,
Is there an option to disable the SAP Lumira user with BI_DATA_ANALYST role from loading the Excel data into SAP Hana? We would like the user to be able to create story boards and publish it on SAP LUMIRA server using HANA views but not allow him to load any flat file data.
Thanks,
Lakshmi

Manish - if you are on BI4 there is no need for the SAP Integration Kit with Web Intelligence
You can connect using the BEx Query
For Lumira right now you can connect using the BEx query but only in the Visualize room - more enhancements are planned in 1.27 - see SAP Lumira Webcast including H1 Plans with BW Updates
I don't think Gateway is needed in these scenarios
Tammy

Securing old 10.4 xserve with hot spare - new xserve does not boot with 10.

dear you,
I am in the murky situation of having to secure a single, non redundant productive scenario which is running on one xserve (model identifier 1,1; dual core 3GHz; boot-rom XS11.0080.B00). due to several reasons the server needs to be cloned, so that a separate xserve with a daily cloned boot-device can take over if things go south with the productive one.
unfortunately the newly bought xserve quadcore single 2.26GHz refuses to boot from the image taken from the production machine. tried to downgrade firmware, did not help. new machine crashes during startup (empty grey screen).
anybody knows any help? moving the production machine to 10.5 or newer is NO option.
an option could be two elder xserves I have here additionally. how do I find out which xserve model will boot with an image from the production server?
thank you all for any idea in advance,
thaijay
Message was edited by: thaijay
Sorry, failed to let you know the productive server is running 10.4.11. please let me know which other details I can post/will help us with this issue

This is never going to work via cloning.
The server you're cloning has to be one of the original Intel-based XServes. Each successive revision adds requirements to the OS to the point where they have a minimum OS version. In the case of the latest generation servers, they won't run on anything earlier than 10.5.6 (IIRC). To put it simply - 10.4 doesn't know how to drive the latest generation hardware.
In any case, cloning is rarely a good idea for servers anyway. You would do better to look at the services you're running and look at backup/failover plans for them rather than trying to clone the entire server. Many services such as Open Directory, DNS, MySQL and more have built-in replication systems that are designed to replicate their data across many machines. Other client-facing services such as AFP, web, FTP, etc. can be set to failover (where the second machine takes over the service when the primary machine fails).
Such replication/failover techniques are far more reliable than a daily clone, and they're also faster. Replicated data could be maintained up to the minute, compared to a day old data if you need to boot up the clone.
If you really, really want to go the clone route, then reverse the roles - setup the new machine as the primary server with all the services and clone this machine to create your failover system. 10.5.6 will run the old/original XServe, it's just a matter of updating your services to the newer version.

SAP on XServer with Virtualisation

Similar Messages

Maybe you are looking for