SAP OSS
Hi people,
I want to download the patches through of solution manager, but I have to set up sap oss connection,because it fails to perform the test.What can i do?
Thanks
-The configuration of MO is correct I followed step by step the guide.
-In the saproutertab I have the next entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
SNC-connection from SAP to local R/3-System for NetMeeting,
if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 1503
SNC-connection from SAP to local R/3-System for saptelnet,
if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P * 194.39.131.34 3299
Deny the rest connections
D * * *
-In the OSS1 tcode
saprouter1
1-.hostname saprouter
2-.ip saprouter
2-.99
saprouter at sap
sapserv2
194.39.131.34
99
sapnet message server
oss001
O01
01
-In the sm59 tcode
On the sap OSS Connection the follow entries:
technical settins--
load balancing
target system OSS
Msg server /H/IP_SAPROUTER/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
GROUP EWA
logon & security--
client 001
user OSS-RFC
Password CPIC
More thanks for help me.
Similar Messages
-
Is SAP-OSS RFC Configuration required for Technical Monitoring ?
Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh EHello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh -
Hello,
RFC SAP-OSS shows this error....
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner 'SAP-SOLMAN:sapdp99' not reached
Error Details LOCATION: SAP-Server SAP-SOLMAN_SOL_00 on host SAP-SOLMAN (wp 1)
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 104
Error Details ERROR NUMBER: 10061
Error Details ERROR TEXT: WSAECONNREFUSED: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 2845
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Aug 26 10:25:45 2011
Error Details VERSION: 38
RFC SAPOSS shows this error...
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner '192.168.0.147:sapdp99' not reached
Error Details LOCATION: SAP-Server SAP-SOLMAN_SOL_00 on host SAP-SOLMAN (wp 1)
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 112
Error Details ERROR NUMBER: 10061
Error Details ERROR TEXT: WSAECONNREFUSED: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 2845
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Aug 26 10:29:14 2011
Error Details VERSION: 38
We have done add these entries in saprouttab...
#SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.2 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.2 3389
outbound connections to <sapserv2> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3299
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
permission entries to check if connection is allowed at all
P 192.168.0.2 194.39.131.34 *
P 192.168.0.147 194.39.131.34 *
But Still not able to resolve this isse....
Please help
Thanks,
AbhaHi All,
SAPRouter is working fine but dev_rout files shows this
nihsl-init: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 entries at 01530048)
NiIInit: host-/servbuffer alreay initialized
SAP Network Interface Router, Version 37.11
Compiled Dec 5 2005 23:28:45
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 2
command line arg 4: -K
command line arg 5: p:CN=SCLSAPDEV-SOL, OU=0001193985, OU=SAProuter, O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "C:\saprouter\ntintel\sapcrypto.dll".
load shared library (C:\saprouter\ntintel\sapcrypto.dll), hdl 0
using "C:\saprouter\ntintel\sapcrypto.dll"
File "C:\saprouter\ntintel\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
<<- SncInit()==SAP_O_K
sec_avail = "true"
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=SCLSAPDEV-SOL, OU=0001193985, OU=SAProuter, O=SAP, C=DE"
NiSetParamEx: switch NIP_CONNLOCAL off
NiSetParamEx: Set UDS path to /tmp/.sapstream%d
NiIMyHostName: hostname = 'SCLSAPDEV-SOL'
main(): pid = 15960, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
NiIInitSocket: set default settings for socket 360
NiCreateHandle: state hdl 1 / socket 360 NI_INITIAL
NiPBind: set option SOL_SOCKET-SO_REUSEADDR of socket 360 TRUE
NiSetStat: state hdl 1 NI_LISTEN
NiBufHdlInit: BufInit for hdl 1
NiIListen: listen for client requests on hdl 1
reading routtab: ./saprouttab
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '5631' = port 15.FF/5631
nihsi-getServNo: servicename '5631' = port 15.FF/5631
nihsi-getServNo: servicename '23' = port 00.17/0023
nihsi-getServNo: servicename '23' = port 00.17/0023
nihsi-getServNo: servicename '1503' = port 05.DF/1503
nihsi-getServNo: servicename '1503' = port 05.DF/1503
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
ERROR => invalid token (168*) in IPadr-string, skip line 25 [nirout.cpp 8451]
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
nihsi-getServNo: servicename '3299' = port 0C.E3/3299
nihsi-getServNo: servicename '3299' = port 0C.E3/3299
Thanks,
Abha -
Raising Customer Messages with SAP OSS on BCS issues
Hi guys,
I'd be keen to know everyone's opinion on raising customer messages with SAP OSS, in particular on BCS.
Often I find that my colleagues are hesitant to raise a note with SAP because they think it either takes too long or they don't get a satisfactory answer.
Whereas as soon as I see something fishy, that I cannot explain I will check my logic once more, check on SDN, check existing OSS notes, then raise a Customer Message immediately (while I continue to investigate/test).
This is partly due to my experience that half the time I feel like a guinea pig in BCS, perhaps because BCS is not as widespread as other modules and i may be the first to try something so may be first to experience the problem.
The first line response (often from Shanghai) usually tries to send the message straight back but I find with a little persistence, clear (and irrefutable) documentation , you soon get through to the experts in Germany (or is it Czech Rep?) who actually understand the issue.
The client has paid a lot of money for the service through their SAP licensing and maintenance fees, so I have no qualms about 'reporting a product error' when I see one.
Also, I find a lot of BCS documentation is out of date, not updated as new releases/EHPs come out, eg I recently relied on the contents of OSS note 936590, which was wrong for BCS 604. So I raised a customer message and requested that they update it, which has now been done - this is too late for me but might help someone else.
Raising a Customer Message with OSS is not an excuse to avoid doing your job, but where there is a genuine error in BCS, I encourage others to raise OSS notes and persis with them until a satisfatcory response is received.Concur with TheScotsman.
The situation is almost the same: the 1st line support (India) very often beat back the costomer message without going deep into the problem. However, if we persist and provide additional details (or when the message was made very professionally and bypassed the 1st line) the message was rerouted to consultants from Czeck Rep.). In this case the progress was significant. Since the client do not provide access to the system, in a couple of times we made a remote session: the support guy gave directions what to do in the system and where to look for some details. The problems were solved in a half an hour. -
Pls som1 send me sap oss note for customising higher edu cess (1%) in CIN
hi
pls some body send me sap oss note for customizing higer edu cess in cin
bcoz i dont have id n password for sap marketplace/help portal.
my email id [email protected]Hi
I have sent the following notes to your mail id:
1040241 Incorrect calculation of Sec & Higher Education CESS in J1IG
1044509 Master note for SECess in release CIN30A - Budget 2007
1032265 Budget 2007-Legal implications
1055370 ER1: Changes for SECess as per budget 2007-08
Cheers
Jags -
Saprouter problem ,, no connectivity to SAP OSS
Hi Tea,
WE have a problem with SAP OSS Connectivity, there is a failure for SNC and the log shows the follwoing error message
when we try to ping the oss conection from sm59
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: SNC processing failed: SncProcessInput
Error Details LOCATION: SAProuter 39.2 (SP4) on 'sapserv2a'
Error Details DETAIL: NiSncIProcIn: sncrc=-4;8000000100498dc0
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 135
Error Details MODULE: nisnc.c
Error Details LINE: 946
Error Details RETURN CODE: -93
Error Details SUBRC: 0
Error Details RELEASE: 710
Error Details TIME: Tue Jul 20 08:43:42 2010
Error Details VERSION: 39
Please help to resolve these issue.
Thanks
ArpitaHi!
You have rectified the error?
I too have faced the similar
trc file: "dev_rout", trc level: 1, release: "640"
Tue Jul 27 12:50:16 2010
SAP Network Interface Router, Version 37.11
Tue Jul 27 12:51:07 2010
ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c 423]
Somebody has ideas? -
Hi,
Am facing a problem while connecting SAP-OSS from SM59. I can able to ping 194.39.131.34 successfully from my saprouter system,router command also working fine as below.
D:saprouter>saprouter -r -S 3299 -K "p:CN=<hostname of saprouter> , OU=0000849108,OU=SAProuter, O=SAP, C=DE"
trcfile dev_rout
no logging active
Iam able to login my devleopment and solution manager systems from out side network also successfully.
But iam unable to connect the SAP-OSS (SM59) from development and solution manager.before that its working fine from last days iam getting the problem of SAP-OSS connection.
Here Iam sending the OSS Connection error on SM59 and dev_rout file after iam checking SAP-OSS through SM59.
SM59 Error :
Error Details Error when opening an RFC connection
Error Details ERROR: SNC processing failed: SncSessionInitiatorAK
Error Details LOCATION: SAProuter 39.3 (SP4) on 'AEOM1SAP05'
Error Details DETAIL: NiSncIInitHdlSecurity: sncrc=-4;000000000275AE40
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 8
Error Details MODULE: nisnc.c
Error Details LINE: 1121
Error Details RETURN CODE: -104
Error Details SUBRC: 0
Error Details RELEASE: 710
Dev_Rout File :
ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1439]
GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged on) (USER=sncadm)
Could't acquire INITIATING credentials for
name="p:CN=AEOM1SAP05, OU=0000757839, OU=SAProu"
<<- SncSessionInitiatorAK()==SNCERR_GSSAPI
'target_acl_key' (addr=000000000202C374, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
ERROR => NiSncIInitHdlSecurity: SncSessionInitiatorAK failed (sncrc=-4;00000000027DFB50) [nisnc.c 1124]
ERROR => NiSncHandleForAddr C9/-1, 194.39.131.34 (rc=-17) [nirout.cpp 3272]
ERROR => NiRClientHandle: NiRExRouteCon for C9/-1 'AEOM1SAP05.aeom.local' failed (rc=-17) [nirout.cpp 2650]
Guide me the same.
Thanku
ThankuHi hashit,
1 st Restart the Solman Server and go to command prompt. Then select the SAPROUTER drive ( D: > cd saprouter )
Currently, your SNC Saprouter process is not up and running, please stopyour saprouter process with command ' saprouter -s ' and restart it using the following with correct User.
D:saprouter> saprouter -r -V2 -K "p:CN=<hostname>, OU=<Number>, OU=SAProuter, O=SAP, C=DE"
Please note that to ensure you Saprouter process is running, you must not close the command prompt screen after you started the above. Once you closed the screen, your saprouter process is stopped and your connection to SAP is dropped.
Please try it and Let me know
Regards
Thomas.T -
Download patch from SAP OSS.
Hello everybody,
I had installed the Solution Manage.
Now I want to download the patches from SAP Protal.
So is it SAP router is required?
which RFC is required for the same and what settings are required?
beacuse their is two RFC SAPOSS and SAP-OSS then which RFC is used when connect to SAP OSS.
I have configure the Maintenance Optimizer but unable to download the Patches.
I have also install the Download manager.
Please suggest me.
How to process so that I can able to donwload the Patch.
Thanks
GanesjHi,
Try FM's from the Function Group GRAP.
Especially the FM's
GRAPH_RECEIVE.
Hope this helps...
Lokesh
Pls. reward appropriate points -
SAP-OSS Connection error LB: Unexpected error in LG Layer.
Hi Gurus,
I am using Solman 3.2 on Oracle/Win 2003 server.
While doing Test connection for SAP-OSS Connection error "<b>LB: Unexpected error in LG Layer</b>" is coming.
<b>Please guide me through configuration steps .</b>
I am using following settings which is appearing by default:
Connection type 3
Load distrib. : Yes
Target system : OSS
Msg. server : /H/147.204.2.5/S/sapdp99/H/oss001
Group : EWA
Regards
GauravHello Gaurav,
- in transaction SM59, delete the RFC destinations SAPOSS - in transaction OSS1 -> parameter -> technical settings, save the
actual configuration. After that, in SM59, test again the connection
Did you get this connection SAPOSS working before or this is the first try?
Check note 35010.
Hope this helps,
Dolores -
Hi,
SAP-OSS connection (as tested through SM59) suddently failed to work and constantly throws the following error message:
Error Details Error when opening an RFC connection
Error Details ERROR: SNC processing failed: ?
Error Details LOCATION: SAProuter 37.11 on sapdev
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 44
Error Details MODULE: nisnc.c
Error Details LINE: 502
Error Details RETURN CODE: -104
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details VERSION: 37
Our server's name is "sapdev".
My question: can this error be related with SAP side or is it strictly our company's networking issue? I've contacted our IT office already; however, they didn't notice anything suspicious.
Also, where can I find a table with error return codes listed? To decipher what -104 in this case means?
Thanks
JanekI also checked "dev_rout" file (the log file), which lists the following error message:
LOCATION SAProuter 37.11 on sapdev
ERROR GSS-API(maj): <b>The referenced credentials have expired</b>
GSS-API(min): Validity date of certificate is invalid
target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
TIME Tue Nov 06 08:48:54 2007
RELEASE 640
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 3411
DETAIL SncPEstablishContext
SYSTEM CALL gss_init_sec_context
ERRNO
ERRNO TEXT
DESCR MSG NO
<b>DESCR VARGS GSS-API(maj): The referenced credentials have expired;;;;
;;;;GSS-API(min): Validity date of certificate is invalid;;;;</b>
;;;;target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
DETAIL MSG N
DETAIL VARGS
COUNTER 3
<<- ERROR: SncProcessOutput()==SNCERR_GSSAPI
ERROR => NiSncInitiate: SncProcessOutput (rc=-4) [nisnc.c 502]
ERROR => NiSnc2Connect C0, 194.39.131.34 (rc=-17) [nirout.cpp 2607] -
Business area with SAP support in SAP OSS notes #
Dear all,
I would like to search OSS documentation which mention that SAP does not support business area anymore? anyone knows the exact OSS number for thatstatement ?
Because as far as I remember, SAP does not recommend business area. SAP advised customer to use PCA or new GL instead.
Thank you for your kind help.
Kind regards,Check OSS Note 321190. Here is one section:
To meet the changing requirements, we will focus the further
functional developments in Financial Accounting on the profit
center entity. With General Ledger Accounting (new) in Release SAP
ERP 2004, you can create financial statements for profit centers.
See Note 756146 for more detailed information.
o The business area will be retained in the present form. The data
and functions will continue to be available. In the context of the
use of classic General Ledger Accounting, business area accounting
(Customizing OB65 for business area financial statements, SAPF181
and SAPF180) will continue to be supported to the known extent;
only a further development in the context of classic General Ledger
Accounting is not planned.
BG -
HOW TO CREATE SAP OSS NOTES ID
I am SAP FI certified and i have my certificate but i have only my SUID as written on certificate. now i want to create my OSS NOTES is , along with SUID i need to give password to create ID. please guide me how create oss id
Hi,
Login on sap market place then go to Data Administration------>User Data -
>Request new users.Then give authorization to this user.
Regards,
Pankaj -
Hi experts!
I don't understand very much how can I know if a SAP note is applicable or not for my system. I know that if I go to System -> Status -> Component Information I can see the realease and level of the support package but in the note I see an specification of the release and version of the support package... that is the part that I don't understand very much... That means if the version is higer in the note and in the system the version is minor the note is applicable? I'm correct?
Thanks for the help!Hi Carlos, pls chk this.
OSS notes describe bugs/issues/problems in SAP software, provide the technical details and correction instructions.
Notes also sometimes cover 'features' (ie things that are not bugs) that cause ambiguous application behavior. Additionally, specific information relevant to releases, SAP strategy (eg when is support to a particular version going to end) regarding its products and so on is also provided via notes.
You have a search portal for SAP Notes which will tell you more about it.
You would a S-user id to logon to the OSS Notes. The S-user id is basically based on the installation number of your SAP system. You can get the user id from your BASIS. Once you get this then logon to this link:
http://service.sap.com/notes.
Check this:Re: oss
Also check this document. It has the step by step procedures with screenshots to apply a Note.
http://www.sappoint.com/basis/snote.pdf
first you should have oss id then you can see oss note here
https://service.sap.com/notes
take a look thread
oss
oss note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
oss note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
in practice, when error occured, normally there will be error number and message, that can be used to search oss note which in return may provide possible solutioon. some problem will have short dump, and in the dump, there is suggestion to search oss note with using keywords specified(program name, module name, etc.)
cheers,
Hema. -
SAP OSS Note 804753 Not working.
Followed all the instructions in the Note and still it is not working , this is done in order to post the data of parallel ledger to CO.
Transaction used is FB01L
Please let me know if there are any ways existing other than raising the OSS Note request in Service Market Place.Hi
For this issue, I suggest you to create a customer message (component FI-GL-GL-RP).
https://service.sap.com/support
Cheers, Kyoko -
Sap oss connection failed.
Dear exports,
I am getting the oss connection failed error.How it will reslove please provide any solution.
I have checked in sm59.
logon : connection error.
1)errordetails: error when opening the RFC an connection.
2)errordetail : error partner: avbc.ad.12.13. sapdp99 not reached.
3)errodetail: location: sap_server_name.
4)errordetail: details:NIPCONNECT2.
5)errordetail: call:connect.
6)errordetail:component NI(network interface).
7)errprdetail: counter:100.
8)errordetail:errornumer:10061.
9)errordetail: error text:wsaeconnectrefused:connection refused.
10)errordetail:module:nixxi.ccp.
11)errordetail:line:2823.
12)errordetail: return code:-10
regards,
RamanIs SAP Router is installed and configured. Is it registered under the customer ID in SMP. Once you register in SMP you need to import in the SAP Router.
If SAP Router is already configured, have set up a connection in OSS1 t code.
if not check the link for the Router installation https://websmp104.sap-ag.de/SAPROUTER
Maybe you are looking for
-
HT4061 How do I change my bank account details?
I have had reason to open a new bank account and need to close the one I have already given. Could anyone tell me how this is done ~ either on my laptop or my iPhone? Thanks
-
BOBJ XI2 does't support Interval/Mandatory variable using bw query7?
hi, I have create a bw query using Interval/Mandatory variable and a SAP EXIT variable. The query can run in Bex Analyzer, but I can't create a unvierse using this query. our BOBJ(SP4) and IK FOR SAP is XI2. Is any support package or same id
-
Hello, ECS 5.0 Trying to find a place to maintain contact persons for organisational units. Any ideas where that is done? rgds GAR
-
I have a document with nearly 200 versions of conditional text that has to be individually swapped out and exported to pdf. I genearlly just do this one at a time all the way though. Is there a way to batch the export of these pdfs? I've been scourin
-
Can we know the total consumption of a text item in a bom over a period of time. Or can we know the consumption values of a phantom assembly Or is there a bom item which is not to be stocked , but thier quantity in bom multiplied with the order quant