SAP Payment Medium File for China

Hi Guys,
Could you advise on this please?
We need to create a payment file from SAP for sending to Bank of America in China.
The payment file needs to be in the following format:
PAYMENT","HEADER","07192005","MTI-MTIW0000","0009"
"PAYMENT","FXW","31","07252005","DEBIT","9976.37","CNY","国家高新
"PAYMENT","TRAILER",
Can you advise please
(1) which payment medium program do you advise to use in order to generate this DME file for China? Is it payment program RFFOM100?
(2) are there other payment programs within SAP for China that can handle different file formats specified by the banking partner? Reading the RFFOM100 documentation, the format above does not seem to be accomodated Bank RFFOM100:
Thanks for any guidance you can offer here.
Michael

Refer OSS Note 164888. You will find an answer to your question.

Similar Messages

  • Howto split the payment medium file for bank's tranference?

    Hello all
    We use the Tx:PC00_M32_FFOT to get the payment file (MT100 format). The file is submitted in bank's portal but the portal accepts 3000 transactions per file.
    How could we do for get files with 3000 transactions ?
    thanks in advance

    Refer OSS Note 164888. You will find an answer to your question.

  • Payment medium program for Taiwan

    Hello Gurus,
    could u kindly provide Standred SAP payment medium program for Taiwan which we maintain in set up payment method per country for payment transactions
    Thanks in advance
    kumar

    hi Suresh,
    thank u so much.
    been searchin for this for some time.
    Regards,
    Hari Kiran

  • DMEE error (Error Log -  Too many payment mediums created for this payment group)

    Hi Experts,
    Please see the below error while generating the DMEE file.
    Error Log -  Too many payment mediums created for this payment group
    Error is - Too many payment mediums created for this payment group
    Please explain how to resolve this error.Send detail documentation how to rectify this error
    Regards
    Sreedhar

    Hi Nimish Agarwal,
    With reference to the error faced i.e. BFIBL02160 "too many payment
    mediums created for this payment group", please review the information
    provided in the long text of this error in detail.
    Please ensure that the orders are not carried out several times.
    Alternatively you can apply the optional usable message 166 (same
    class: BFIBL02), so that you can prevent creating duplicates in future.
    Please customize this message as an error so as to prevent the system
    from creating duplicate files. You can customize this message in OBA5.
    The message BFIBL02 160 always occurs, if you create more than one
    file for the same payment run, in order to warn you not to send the
    same file twice to the bank.
    The SAPFPAYM program does not create 2 files at once. But if you
    run this program more than once for the same payment run, more than
    one file is created. From the second run on you receive the error
    message BFIBL02 160. You can easily test it, by creating a new
    payment proposal and creating a new file with this proposal and
    SAPFPAYM. The first time you run this program you will not receive
    the message.
    Hope this clarifies.
    Kind Regards,
    Fernando Evangelista

  • One payment ID has more than one payment medium file by Vendor

    Hi Guru,
    Running DME engine currently creates one payment medium file but inside the lines haaving dulicates under the same payment method and same vendor.
    How to collect  them in a payment medium file  under one payment method?
    KR,
    J.

    Thanks for updates but we are using Standard programe to create DME file.
    It does not seem related to program problem.
    KR,
    J.

  • Error Log -  Too many payment mediums created for this payment group

    Hi Experts,
    When I am doing payment to customers through T-code F110, I am able to clear the open item. But when we are executing the Payment medium - DME Administration, generate the Payment Advice and when we see the print preview of the Payment Advice in spool request, System is showing the following errors,
    "BFIBL02160               Too many payment mediums created for this payment group"
    "BFIBL02616               End of log for payment run 20120123 / NAA02 , NSD / 200"
    "This is line 1/column 45 on page 1"
    Message no. SP01R116
    Kindly help how to rectify the same
    Thanks in advance
    Regards,
    Nimish Agarwal

    Hi Nimish Agarwal,
    With reference to the error faced i.e. BFIBL02160 "too many payment
    mediums created for this payment group", please review the information
    provided in the long text of this error in detail.
    Please ensure that the orders are not carried out several times.
    Alternatively you can apply the optional usable message 166 (same
    class: BFIBL02), so that you can prevent creating duplicates in future.
    Please customize this message as an error so as to prevent the system
    from creating duplicate files. You can customize this message in OBA5.
    The message BFIBL02 160 always occurs, if you create more than one
    file for the same payment run, in order to warn you not to send the
    same file twice to the bank.
    The SAPFPAYM program does not create 2 files at once. But if you
    run this program more than once for the same payment run, more than
    one file is created. From the second run on you receive the error
    message BFIBL02 160. You can easily test it, by creating a new
    payment proposal and creating a new file with this proposal and
    SAPFPAYM. The first time you run this program you will not receive
    the message.
    Hope this clarifies.
    Kind Regards,
    Fernando Evangelista

  • F110 -Too many payment mediums created for this payment group

    Hello Gurus,
    Am getting below error after executing payment run F110.
    BFIBL02160               Too many payment mediums created for this payment group
    BFIBL02616               End of log for payment run 20140409 / DPA04 , PE1 / 500
    We are not able to see the Payment advice note in the spool request.
    Can you please share your ideas to resolve the issue
    Thanks in advacne

    HI,
    Please let us know for account like vendor , customer  you running the payment advice.
    check if the customer ,vendor document  is posted or not.
    which customer, vendor number you had maintained in the f110 .
    check that before you run it.
    else.. create new document  and start run the payment.
    for single document fi you try  more than once it will give the above error.
    and also the check the program and variant as well.
    let me know any corrections.
    thanks.

  • Payment Run program for china country code

    Hi all,
    We have a requirement where, after running a payment program we need a generate a dme file. till now we were using rffod__u which is for derman,
    But our requirement is for china.
    Can anyone suggest which is the payment run program that is used for china.
    Please give replies as early as possible
    Thanks and Regards
    Veda

    Hi,
    you can go to F110 T.CODE
    Run date:Todays date
    Identification:Country and any number.
    It should help you.
    *reward points if it useful.
    regards

  • Payment medium program for MT103 format

    Hi,
    We had a requirement of generating MT013 format from automatic payment program and we are on ECC 5.0 Version.
    I have tried generating with program RFFOM100, but unable to meet all the requirement for HSBC bank, UK.
    I have another program RU_MT103 in ECC 6.0 but this is not available for ECC 5.0.
    Can anyone suggest the payment medium program to be used to generate MT 103 format.
    Thanks in advance
    Rajesh Angadala

    Hi, I implemented this MT103 two years ago for ECC500;
    At the end I copied program RFFOM100 and created a new ZFFOM103 based on the original one.
    Other option is to use PMW. If I am right I think that SAP provides a PMW format (MT103) and a structure (FPM_SWIFT_103) that I think that could be useful if you are used to PMW.
    I hope this helps
    Rafael Barreda

  • Classic payment medium programs for EFT

    Hi All!....
    I'm trying to run the payment for EFT with the classic run but an error is displayed "Program RFFOAU_T: No records selected "...
    The PMW --> AU_BECS works ok..but when trying to Run the classic payment with RFFOAU_T nothing happen...
    I'm using the classic payment cause I need to create 2 files for the payment.... one is already been created with all the data to the bank, we need the standard file.. and the 2nd one is an EFT advice with 5 diferents types of records...
    What I'm doing is:
    - created a copy of the programa RFFOAU_T (zRFFOAU_T)
    - add code lines...
    I am not sure if thi is the best way to do this, do someone know how to do this? anyway it doesn't work...
    Thanks.

    Hi Jayaram... Yes I've created a variant....
    I will explain you again my issue...
    I need to create a 2nd file with Remitance Advice to send it to the Bank..In transaction F110 you can create a Form to send it to the vendor or whichever....
    I need to find the plase to create that file, not the form....
    I thought in create a new program but I kept reading and now I am not sure if it is the best option...
    what do you reckon?

  • Security Control on Payment Medium File

    Hi! Experts,
    Currently, our Auditor has a question :
    Data Medium Exchange file is first created for Vendor/Employee payments. Before Finance/HR staffs transmit the files to the Bank, how to make sure the DME file is not append/modified (especially BASIS/DBA/TECHNICAL people have Super access, they can use SQL to modify the content of the file, to delete the change log...)?
    Would you mind sharing your control process with me ? Thanks.

    Hi,
    Please check DME file encryption tread for your needful:
    DME file encryption
    Regards,
    Santosh

  • Payment medium program for outgoing transfers payments in Portugal

    Hello experts,
    we need to customize automatic payments with payment way T (standard outgoing transfers)  for Portugal
    and we need to be customized with the correct program to create a DME file.
    Has anyone experiece with portuguese banking settings (maybe standards?) for this issue?
    For Spain there is program RFFOES_T which generates a standard file (spanish norm CSB 34-1)
    Thank you,
    Daniel

    Hi.
    I would like to ask you if you have finally solved this issue, and if you are  using PS2 for international payments. We are also setting up a Company in Portugal and need some info about the formats we can use to send automatic payments.
    Thanks in advance.
    Ignacio.

  • "Purpose of Payment" Tag in Outgoing Payment (XML) file for India

    Hi All
    While setting up DME tree for India , we need to populate field “Purpose of Payment” as per the norms laid down by the Reserve Bank of
    India (RBI). Please help on following points if anyone has experience of developing DME tree for RTGS payment method of country India.
    How the “purpose of payment codes” have been populated based on the vendor invoice
    How DME tree configuration has been done for the XML Tag <CtgyPurp>
    Currently RBI has following codes :
    Thanks and Best Regards
    Nitin

    Hi Nitin,
    It looks like it's not related to TRM.
    Maybe you can ask the FI experts in the relative area.
    Thanks, Feng

  • SAP delivered WPS file for SA

    We need to understnad if anyone has applied the specific patches for SAP delivered Saudi WPS banking output ?  If any step by step information is available it will help.

    Yes you are right, I actually have done this in the past and totally forgot. I ended up using Visual Administrator which worked but I am pretty sure the override options in SDM would have worked also.
    thanks
    brad

  • Violating Namespace Rules in Payment Medium Formats Customisation

    Hello
    I want to use the PMW to create payment medium files for Citibank.  I created the mapping in DMEE.  I called it Z_CITIPAYLINKPLUS.  Now I am trying to set-up the payment medium format in SPRO and I get the following message in the status when I use this name:
    Choose the key from the allowed namespace.
    I thought that anything starting with a Z was open for customers.  Has anyone else encountered this issue?
    What am I doing wrong???
    Here is my info:
    SAP_BASIS 620 0058 SAPKB62058 SAP Basis Component
    SAP_ABA 620 0058 SAPKA62058 Cross-Application Component
    SAP_APPL 470 0025 SAPKH47025 Logistics and Accounting
    SAP_HR 470 0010 SAPKE47010 Human Resources
    EA-IPPE 200 0020 SAPKGPIB20 SAP_iPPE
    PI 2004_1_470 0015 SAPKIPZI5F PI_2004_1_for_R3_Release_470
    PI_BASIS 2005_1_620 0000 - PI_BASIS 2005_1_620
    ST-PI 2005_1_620 0008 SAPKITLQG8 SAP Solution Tools Plug-In
    EA-APPL 110 0021 SAPKGPAA21 SAP R/3 Enterprise PLM, SCM, Financials
    EA-FINSERV 110 0006 SAPKGPFA06 SAP R/3 Enterprise Financial Services
    EA-GLTRADE 110 0006 SAPKGPGA06 SAP R/3 Enterprise Global Trade
    EA-HR 110 0010 SAPKGPHA10 SAP R/3 Enterprise HR Extension
    EA-PS 110 0006 SAPKGPPA06 SAP R/3 Enterprise Public Services
    EA-RETAIL 110 0006 SAPKGPRA06 SAP R/3 Enterprise Retail
    DIMP 471 0009 SAPKIPME09 DIMP 471 : Add-On Supplement
    ST-A/PI 01K_R3_470 0000 - Application Servicetools for R/3 470
    Thanks for the assistance!

    I figured it out myself.  I had to start the name with a '/'.  I just was not expecting that.
    thanks for reading!

Maybe you are looking for