SAP Personas Development Guide

Hello,
Is there a development guide available for SAP Personas.
regards
Kaushik

Hello Kaushik
You can get a lot of information on Personas from the Getting Started Page.
At the bottom of the page you will also see links to Technical guides and How-To videos.
Hope that helps.
Vandana

Similar Messages

SAP BW development user guide links

Hi - I'm new to SAP BW development. I'm looking for user guides which will help to understand the Info cubes, DSO, creating a BEx query in Query designer, step by step instructions etc. I went through SAP help forum but not sure where to start and which guide to download. Appreciate your help.
Thanks
Suresh

Hi Suresh,
Please refer to this link below
Help For Beginners in BW
Also there is plenty of information on SAP website about it.
Regards
Sunny

SAP NetWeaver Developer Studio Installation guide

Hi All,
Could you please provide the SAP NetWeaver Developer Studio Installation guide?
Thanks & Regards
Sara

Hi Sara,
Go to https://service.sap.com/nw04installation go to the bottom of the page expand dev env and you'll see the Installation Guide - SAP NetWeaver Developer Studio
this should answer your question.
Regards
Juan
Please reward with points if helpful

Installation Guide for SAP NetWeaver Developer Studio 2.0.5

Hi,
The Sneak Preview Download of SAP NetWeaver on this site also contains the SAP NetWeaver Developer Studio 2.0.5
I am trying to install this version. However, the installation guide provided alongwith this setup refers to the version 2.0.4
I checked on SAP Service Marketplace too. It seems that even SAP has not issued anything for this version.
Any ideas where I can get the relevant installation guide for v2.0.5?
Thanks and Regards,
Sagar Kirtany

Hello Sagar,
the Installation Guide for the Developer Studio is included in the "How To Install EP 6.0 SP 4 Sneak Preview Edition". But you have only to extract the ZIP File and start the JDTsetup.exe.
Regards
Gregor

READ THIS FIRST: Check out the Developer Guide, other forums and Wikis

The Portal Content Development forum is one of the most-active forums on SDN, and many, many experts read it and can answer your questions.
Before posting, please check out the following sources of information:<ul><li><a href=http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Portal Developer Guide</a> (2004) and <a href=http://help.sap.com/saphelp_nw2004s/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Running an Enterprise Portal (developer guide)</a> (2004s): This is THE source for information on portal APIs. All of the public APIs are documented here. </li>
<li><a href=https://wiki.sdn.sap.com:/wiki/display/EP>Portal Wiki</a>: See below.</li>
<li>This Forum: Someone probably has already asked your question. Before adding another post, check if you can find a similar post that has sufficient information to help you. </li></ul>
<h3>Other forums</h3>
<li>Employee self service questions: https://forums.sdn.sap.com/forum.jspa?forumID=267</li>
<li>Visual Composer questions: https://forums.sdn.sap.com/forum.jspa?forumID=58</li>
<li>Web Dynpro for Java questions: https://forums.sdn.sap.com/forum.jspa?forumID=52</li>
<h3>More on Wikis</h3>The recently announced Wiki functions of SDN will, over time, be a great start for getting information about portal development and implementation...
The main wiki portal page is <a href="https://wiki.sdn.sap.com:/wiki/display/HOME/Portal">here</a>.
Please read this before asking a question in the forum - believe me, there are not many new questions being asked!
There is quite a bit of repetition in forum questions, and maybe if people are directed to the wiki page as a first step, it may make it easier to watch this forum.
The Wiki concept is all about sharing within a community, so feel free to modify the content - more accurately 'our' content - and maybe start some other pages, such as one about modifying logon pages - a fairly consistent topic in this forum
Edited by: Michael Nicholls on Feb 18, 2009 9:48 AM
Edited by: Michael Nicholls on Feb 18, 2009 9:49 AM

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

From Where can i install ABAP plug-in in SAP Netweaver Developer Studio 7.3?

Hello,
I have Installed SAP NetWeaver Developer Studio 7.3 and I was trying to install ABAP plug-in but i couldn't found the link to install.
Later i found SAP Development Tools for Eclipse this link but its not working. As i came to know it will work only for Luna (4.4) or Kepler (4.3).
Would you please let me know how to install ABAP plug-in in SAP NetWeaver Developer Studio 7.3.
Thanks and Regards,
Shaik Shabeer Ahmed.

Hello Ahmed,
Use the links in that page:
NWDS Download Links - Java Development - SCN Wiki
And here also an installation guide:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80a100d2-109f-2e10-e996-c2b80803740b?overridelayout=t…
Best regards,
Serhat

Error while installing SAP Widget Developer tool.zip on Eclipse Java EE IDE

Hello,
          I am new to SAP widget. I hav installed "Eclipse Java EE IDE for Web Developers" from eclipse.org and now when i was trying to install SAP Widget Developer tool.zip add-on as stated in the SAP Enterprise Widget Development Guide
--> http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
I get this error at the last stage of installation.
Cannot complete the install because one or more required items could not be found.
Software currently installed: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
Missing requirement: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner 0.13.0.1376) requires 'bundle org.eclipse.wst.javascript.core 0.0.0' but it could not be found
Cannot satisfy dependency:
    From: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner [0.13.0.1376]
Cannot satisfy dependency:
    From: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner.feature.group [0.13.0.1376]
Please helo me to get this error fixed.
Thank you very much.
Anil Raparthi.

Hi,
The newest and default version of Eclipse is Galileo which is version 3.5.x
According to the Widget development guide, widget developer tool covers Eclipse 3.3.x (Europa) and 3.4.x (Galileo).
The problem is solved by downloading one of those versions from http://wiki.eclipse.org/Older_Versions_Of_Eclipse and installing widget development tools.
Regards,
Jolanta Gniadek

Error while Installing and Starting SAP Widget Development Tools

Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AM

Hi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai

Error during installation SAP SAP NetWeaver Developer Studio

Hello,
Can somebody help installing SAP SAP NetWeaver Developer Studio?
I get the message:
SAP NetWeaver Developer Studio 2.0.0. Setup Wizard not Completed
The SAP NetWeaver Developer Studio 2.0.0 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard.
The following program files could not be installed:
     c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\vmconfiguration.xml
The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://D:\IDE\setup\saplogvw.exe .
The following program files could not be installed:
     c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\vmconfiguration.xml
The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://D:\IDE\setup\saplogvw.exe .
It looks like a Windows XP problem, because manually I can't copy or create a file in de directory:
C:\Documents and Settings\All Users\Documenten
So the following directory doesn't exits:
c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\
It's weird that I don't have access to the "Documenten" directory (this is the dutch Shared-documents-directory) , because I never changed it.
When I right-click the directory "Documenten", and I go to Properties, then I don't see a tab setting access groups.
How can I get access again to the "Documenten"-directory?
Kind regards,
Alwin.

Sunil,
     There is a NW-DS version on the NW4 test drive DVD given out at TechED which I believe was also posted on the ftp.sap.com before TechEd '04 for CeBit 2004. I personally would like to put my vote out there for getting preview versions to the hands of admins to install and kick the tires before we try to convince management to buyin to purchase a product. Another way SAP reduces TCO?
Bill

Adobe Flex within SAP NetWeaver Developer

Hello,
I can't find Adobe Flex within SAP NetWeaver Developer Studio.
I am using Version: 7.0.09
Build id: 200608262203
Is it necessary to download additional software for it?
Regards
sas

Hi
NetWeaver provides the ability to develop portal content without programming through Visual Composer (Outside-in approach).
SAP NETWEAVER VC
Visual Composer is a visual modeling tool that enables sophisticated
content development for the SAP NW Portal merely by dragging and
dropping appropriate objects and establishing relationships between them.
No programming required.
Visual Composer is completely Web based. Business experts can sit next to
the business users and access Visual Composer from any machine to build or
customize to reflect the business needs on demand
The purpose of Visual Composer is to provide a visual tool that enable
customers quick and easy content development thereby
Minimize the time and effort to create content
Lead to quicker go live decision
Reduce Total Cost of Ownership (TCO)
Increase ROI
Please check out the following links:
http://help.sap.com/content/documentation/netweaver/docu_nw_vc.htm
http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_UserGuide_v1_1.pdf
http://help.sap.com/download/netweaver/nw04/visualcomposer/html/en/fd/4a7e40417c6d1de10000000a1550b0/frameset.htm
Here the installation guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/45bfd990-0201-0010-e1b3-a38f22a5b5b2
For download info check this thread:
Where to download VC?
Visual Composer as Modelling Tool
Models designed in Visual Composer can be deployed to run in one or more technology engines, including SAP HTML/B and Flex. The same model can be deployed to more than one environment, although not all components and controls are fully supported in each. Visual Composer implements a proprietary XML-based Visual Composer Language as its source code for creating the models. Only at deployment is the model actually compiled into the executable code required by the selected UI technology. The result is a model once run
anywhere capability.The models that you build in Visual Composer are generated in Generic Modeling Language (GML) code. To deploy your application to a portal, the GML code
must be compiled into a language supported by the portal. During compilation, warnings and possible errors may be discovered, enabling you to check the model validity. The compiled content is deployed directly to the portal, in the runtimeenvironment that you select.In runtime, transactional content can run through HTML/B and Flex, while
analytic content which may require a more animated environment may run through Flex. The models deployed by Visual Composer to the portal include runtime metadata, which is stored with the model in the PCD and exported in the business package, for delivery to customers.
Thanks,
Tulasi Palnati

What is standard authorization object for Personal development P_PLOG

Hi,
Recently i got a object in HR and i dont have any experince in HR.Could you guide me how to asssign standard authorisation object for the personal development p_plog? how to see the infotypes and what is the header field in innfotypes?

1-First of all the object is "PLOG" for personal planning. Theres no object with p_plog , most of time to maintain HR master we use object P_ORGIN.
2- You want to assign authorization for certain infotypes?
if yes, you have to go TR.PFCG and assign the authorization to that specific role.
Now you might have question , how youll will track down the roles against the authorization object .
Therere several ways , you can go to Tr.SUIM and find reports by user , roles etc.
You can also go SE16-> give table AGR_1251, give object and you can see the values in table.
After finding the suitable roles you can go to PFCG and assign the values to the roles.
As a good practice its better to create your OWN role Z:hrXXXX and assign it to users.
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Knowledge comes but wisdom lingers!!"

C_ABAP_70 - SAP Certified Development Associate - ABAP with SAP NetWeaver 7

Hello all,
Does anybody have any information on C_ABAP_70 - SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0?
Study guides? Outlines? Sample Questions? Anything?
It is being offered at TechEd this year and I'm trying to determine if I should take it and what I should study up on.
Thanks!

HI
You can look into the following link te get desired information
http://www.sap.com/services/education/certification/certificationtest.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA282F33B1BD441FBE4083F2C923E33EA0C5960F8C8950FDEB6081ABED6E0E05E2617A693D85077260F9EA218716A79AEF3AA57C7D5E8975334%7cBDB43D565DAE7A9D74437573A166A860
OR you can follow following steps:
http://www.sap.com/services/education/certification/index.epx
Go to "find a certification" box
Put
Sap netweaver
developement
developer/developement consultant
Now got to "find" button
click on "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0 " Option
Now click on following link under "Certification Tests"
SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0
Now u will get desired output.
reward points if it is answered.
Regards
Sukhi

SAP Application Development Lead (ABAP) Needed in Fort Worth, Texas

Hi SAP Community,
A client of mine in the Aerospace and Defense industry is looking for an SAP Application Development Lead in Fort Worth, Texas for an 11 month contract. Below is the description, if you are interested please email me your resume at <removed> or give me a call at <removed>
SAP Application Development Lead ABAP

Fort Worth, Texas
Contract - 11 months
Responsibilities:
Lead the development of the technical integration strategy for the SAP environment including approved tools, usage criteria, development standards, and monitoring techniques.
Ensure optimization of SAP technical performance in the infrastructure environment, including network, database, and application server performance.
Provide oversight to individual project technical development activities to ensure appropriate use of integration tools and standards.
Establish an internal staff development plan to train and development internal expertise in use of SAP technical tools and techniques and testing tools.
Participate in SAP issue and change management processes to ensure alignment with business objectives, and appropriate prioritization and assignment of integration related change requests.
Skills:
7-10 years experience in ABAP toolsets.
Comprehensive knowledge of problem analysis, and design and application development programming techniques.
Minimum of 5 years experience in developing and supporting SAP in a complex, multi-organization, multi-landscape environment.
Minimum of 5 years experience with SAPs native integration tools (BAPI, IDOCS, etc).
Minimum of 3 years experience with IBMs WBI (Websphere).
Superior organizational skills and excellent communication skills.
Strong analytical and problem solving skills.
Good customer service skills.
Solid project management skills and team-oriented interpersonal skills.
Ability to work in a matrix organization.
Education:
Bachelor's degree in Computer Science, Engineering, or related discipline with an IT focus is required.
 This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder').
Message was edited by:
Rich Heilman

This is not a recruitment site. Thanks for NOT posting such threads.
Regards,
Rich Heilman

Sap abap developer or java developer

hi
I am an engineer (fresher) and i have two job offers in my hand one is java/j2ee developer and other is sap abap developer
i am not able to decide which one to choose and i have no idea that which one is better than other.
So if u were in my place then which offer will you accept
Thanks
Viron

Hi Viron,
I had to make a similar decision myself a number of years ago. Based on my personal experience I would say the following:
*ABAP Vs Java*
- ABAP is a business procedural language, only used with SAP. Therefore you need to ask yourself the question do you want to restrict yourself to working with one product. Also more importantly do you enjoy writing business related reports? i.e. if you would prefer to program games on mobile phones or be involved in developing a cutting edge software product then ABAP is not for you.
- As a general rule ABAP jobs command a higher salary over Java (in the UK anyway) as it is a more specialised skill. There are far more Java developers around.
- You may feel like ABAP is a step back after programming in Java. Although ABAP supports object orientated programming, web services, web portals ect.. this is not commonly adopted. There is of course a disclaimer here as if you are going to work for a consultancy on green field SAP implementations then you are far more likely to adopt and use the above technologies. However if you are working on an older SAP system or in a support environment most companies are still using the standard R/3 Interface i.e. no web portal and the majority of their reports have not been developed using OO Programming Techniques.
- You could get the best of both worlds if you can get a job as a webdynpro Java developer in SAP. Then pick up ABAP on the side. Having knowledge of both languages would make you highly employable as a web portals developer.
- If you are strongly motivated towards Business Application Programming but would prefer to keep your options open to move into another area later in your career. Then you could look at working with Oracle Fusion, it is a software product based on Java. It is also the 2nd largest ERP tool on the market just behind SAP. This way you are building on your Java programming skills but not restricting yourself to working with an ERP software product in the future.
Hope this is of some help.
Regards,
Phil

Hello World in SAP NW Developer Studio

Hi,
Was wondering if someone could provide me (or guide me) to a step-by-step guide on creating a "Hello World" application within SAP Portal using the SAP NetWeaver Developer Studio.
Thanks very much.

Step 1:Click File->New->Other: Choose Portal Application(Left pane) and choose Create a Portal Application Project(Right Pane)Hit Next-> Enter Project Name:"ABCXYZ" and hit Finish.A project ABCXYZ will be created.
Step 2:Right click on ABCXYZ and choose New->Other and now choose Create a new Portal Application Object, Hit Next->Next and now choose a template: Under Portal Component, choose JSPDynpage and hit next.
Enter Dynpage Name:"Test", Enter package: com.abc and next JSP Name: test and hit next->Finish(You can create a Bean just before hitting Finish)
Step 3: Now from application , Under DIST->PORTAL-INF folder open portalapp.xml.
Click on components on the bottom of this xml file. right click component-profile and hit add .
Now choose New Enter Name as: tagLib and value as /SERVICE/htmlb/taglib/htmlb.tld and Finish.
Now on the bottom of the portalapp.xml choose source.REMOVE these two lines:
 <property name="ComponentType" value="jspnative"/>
 <property name="JSP" value="pagelet/test.jsp"/>
Step 4: Open your test.jsp from the DIST->PORTAL-INF folder and hits source on the bottom.
Now put this <%@ taglib uri= "tagLib" prefix="hbj" %> on top of it.
Step 5: Now put "Hello World" on the JSP. You could also use different htmlb components to display text like textview
Step 6: right click your project and hit export...choose the par file option and then ur project.
check Deploy Par option and hit finish to deploy it!
Step 7: Build your iview in portal based on this par file!
Regards,
P.

SAP Personas Development Guide

Similar Messages

Maybe you are looking for