SAP PI 7.3 Upgrade from SAP PI 7.11

Dear all,
Just a small clarification on PI 7.3 upgrade.
In the document,  Decision making factors when moving to SAP NetWeaver Process Integration 7.3 - Upgrade or New
Installation with Phase-out, it is mentioned that
If you plan on taking advantage of the performance benefits of the Advanced Adapter Engine
Extended (AEX), please be aware that there is no upgrade path to move your existing PI to a
java-only AEX. This includes the AAE (Advance Adapter Engine) available with PI 7.1 and PI
7.11. The AAE is the runtime for the AEX but the AEX is more than just the AAE and the AAE
*cannot be upgraded to an AEX*
The second exception is if you are planning on moving scenarios to the AEX that you currently have
running on the AAE. This will require a new installation of the AEX (as stated earlier, the AAE cannot
be upgraded to an AEX) and a change to the configuration of the AAE scenarios
I am just littel bit confused with above statments. My case is as below.
We have SAP PI 7.1 EHP 1 (i.e) SAP PI 7.11 with ABAP and AAE. Most of our interfaces are in AAE and now planning to upgrade to PI 7.3 with both stack (i.e) ABAP and Advanced adapter engine Extended.
My questions are,
  1) Can we upgrade our PI to PI 7.3 with both stacks? i don't want to install a new system
  2) the above two points are valid if we want to have java only AEX. am i correct

Found out:)

Similar Messages

  • Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • Issue with SAP GUI 7.30 launching with users upgrading from 7.10

    We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
    Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
    I don't know why the program is trying to search for saplogontree.xml.
    I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
    I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

    This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
    Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
    If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
    The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
    Windows Vista and higher, and will only cause further trouble later on in the updates
    See note http://service.sap.com/sap/support/notes/1409494
    Jude

  • Urgent SAP upgrade from 4.0B to 4.7 Oracle 9.2.0.6

    Dear support,
    I have upgraded my oracle database to 8.1.7.4 with 4.0B extended kernel along with upgradation from NT 4.0 to Win 2000 is finished , and we are planning to upgrade SAP to 4.7 version.Please let me know whether i need to upgrade my database to oracle 9.2.0.6 before upgrade prepare phase ,
    If yes then , do 4.0B ext kernel on Win 2000 will support oracle 9.2.0.6
    I am not able to find any info on service.sap.com\PAM , because info about 4.0B
    version not available.
    Best Regards,
    AjitR.

    -> regarding 40B_EXT see sapnote 1.009.695
    -> see sapnote 85.838 (section Operating System: WINDOWS FOR X86):
    <b>SAP KERNEL 4.0B_COM 32-BIT:</b>
    <b>ORACLE 8.1.7      WINDOWS SERVER 2000/IA32 32BIT    4,5
    ORACLE 9.2            WINDOWS SERVER 2000/IA32 32BIT     6,7,8</b>
    ORACLE 9.2            WINDOWS SERVER 2003/IA32 32BIT     9
    SAP KERNEL 4.0B_EXT 32-BIT:
    <b>ORACLE 9.2            WINDOWS SERVER 2000/IA32 32BIT     6,7,8</b>
    ORACLE 9.2            WINDOWS SERVER 2003/IA32 32BIT     9
    GreetZ, AH

  • Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

    Hi,
    I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
    If yes, could you forward some links so as to know how.
    Thanks,
    Fariha

    hi,
    >>>>Is that Possible..?
    yes
    >>>Wont there be any additional configuration needed ?
    if you use IDOCs then you don't need anything special
    Regards,
    michal

  • Regrding upgradation from sap r/3 4.6 to ECC 6.0

    Hi Friends,
    We want to upgrade from 4.6C to ECC6.0 .
    Pls can any one suggest me which tool i have to use .
    Possible pls send me some docs on this one.
    Thanks & Regards,
    Ramnaresh.P

    hello,
    u need to post in forums SAP Solutions » SAP ERP 6.0 Upgrade .this is not the forum to post,
    For the info:
    For the functional and technical changes, check out the release notes for SAP ERP 6.0 and SAP NetWeaver (AS ABAP usage type) on the help portal respectively. http://help.sap.com
    You can also check out the SAP ERP solution browser on the SAP ERP upgrade page. http://service.sap.com/erp-upgrade.
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Please refer to the following links -
    https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7308da46-0d01-0010-30aa-b61527ba008c?rid=/library/uuid/9cfdd546-0d01-0010-6688-ba8ddc48edc9
    http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
    http://www.sap.com/solutions/business-suite/erp/pdf/ERP_Upgrade_Guide.pdf
    Reg,
    Dhanya

  • Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

    Hi,
    We are planning upgrade from 4.6C to ECC6.0 .Is there a table in SAP which contains old and new transaction codes? or is there any easy way to find obselete transaction codes and new Tcodes.
    I also want to know the new tables added and replaced tables .Any
    help is appreciated.
    thanks
    Venkateswara Rao Yeleswaram

    Hi
    Try this link, which will give functionality enchancements between different versions of SAP.
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Regards
    Ramakrishna

  • Upgrade from Training and Events managment to SAP LSO

    Hi,
    We've upgraded from Training and Events management to SAP LSO 604 and during that process we have run the execute booking relationship harmonization node in IMG.
    We still have references to Business event groups and Business event type in themaster data catalog instead of Course groups and Course types. Are we missing something?
    Thanks,
    Swathi.

    Hi Swathi,
    You have not missed anything, they  resemble the same both in TEM & LSO so dont worry.
    Go Ahead >>>>>>>>>>>>>>
    Regards
    Rafi

  • How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

    Hi Experts,
      I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
    GRC 10.0 only work on NW7.02,we now have NW7.01. 
      How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
    Use EHPI tools or just spam/saint  or any other way ?
    current version:
    SAP_ABA 701 0006 SAPKA70106
    SAP_BASIS  701 0006 SAPKB70106
    PI_BASIS 701 0006 SAPK-70106INPIBASIS
    SAP_01 0006 BW SAPKW70106
    Thanks!

    HI,
    Net wevaer 7.2 CE is totally different from Net weaver 7.01.
    No relation i feel.kindly check the links.
    http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
    http://help.sap.com/content/documentation/netweaver/index.htm
                      OR
    You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
    You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
    Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
    Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
    *Regards,
    Ajitabh

  • SAP AFS Upgrade from version 5.0 to 6.4

    Hi Experts,
    I wanted to know if someone here was familiar with the SAP AFS upgrade from 5.0 to 6.4. I wanted to know how exactly they improved the  areas listed below. (obtained from SAP Course). Your help would be greatly appreciated
    http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=%5b%5b|wdedaf||1||de|%5d%5d|
    1) Improvements in the areas of planned independent requirements, seasonal concept, value add services, Combined order, productionu2013 warehouse interface
    2) Production Planning Basic Data - Enhancements of AFS Bill of Material (AFS BOM), SKU Group Based Routing
    3) Manufacturing Execution u2013 Collective Planned Order Conversion, Combined Order Confirmations
    4) Batch Determination/Classification for SAP Apparel and Footwear
    5) Handling Unit Management for AFS
    Thanks,

    Hi Ronny,
    Thanks for the reply!
    These patches you speak of, is it for the types of issues I mentioned in my first post or do they cover the entire AFS functionality? I assume it still requires complex configurations but are there a lot of complications with going from AFS 5.0 to 6.4, compared to a new AFS 6.4 implementation? Specifically with the grids, categories and BOMs?
    /Cheers

  • MB_DOCUMENT_BADI - SAP R/3 release upgrade from 4.7.1 to ECC 6

    Once finished upgrading from SAP R/3 4.7.1 to SAP ECC 6, from SPAU I see that there was no problem on the implementations of this BAdI. But when I tried the transaction, where this BAdi was implemented in, I realized that my implementations were not working. In addition, from SE19, I see that these implementations are active, so why they aren't working?
    I think that there are some problem in BAdI implementations when upgrading SAP release, but I don't know how to solve my problem and turn on my implementations.
    Thanks,
    Luca

    Hi Sunny,
    i continued with the option - without ADD ON.
    So, this mount point and ADD ON dvd issues are over.
    In the next screen, i have to specify the xml file and place the packages under EPS/in. I have done that accordingly and now i get a new error - No matching SAINT package for 'SAP_APPL' found.
    Any ideas where i have done wrong?
    Thanks,
    Mohan.

  • Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

    Hi
    We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
    1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
    2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
    3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
    Thanks
    anu

    Hi Anu,
    1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
    2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
    3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
    Thanks,
    Sneha

  • Upgrade from SAP Training & Event Management (TEM) to SAP LSO

    What are the best practices to follow when you upgrade from TEM to LSO. Any issues to look-out for, avoid, etc

    Hi.
    I have a document from SAP related with CRM upgrade and CRM migration.
    I just don1t know how to insert it here on SDN. Yesterday I displayed my address on a message and I received a message from the moderator complaining about that.
    If you know were can I put this docs please forward.
    I get them from service.sap.com
    Migration guide has 280 Kb and Upgrade guide has almost 9 Mb.
    Kind regards,
    Susana Messias

  • Role of Time Mgmt functional consultant during SAP Upgrade from 4.7 to ECC6

    Hi,
    Could anyone explain the role of a time management functional consultant during SAP upgrade from R/3 4.7 to ECC6.0. Please provide me if you got any documentation.
    Thanks,
    Sunny

    "After you upgrade to SAP ERP 6.0, you can enhance the functionality of your application without performing a further
    upgrade thanks to a new deployment technology u2013 the SAP enhancement package for SAP ERP. The enhancement
    packages simplify the way you manage and deploy new software functions for SAP ERP." - that is the real benefit of ECC 6.0
    There aren't any major changes to PTM functionalities from 4.7 to 6.0. I hope your system is already using IT 2006 instead of IT 0005. Under functional role, you are required to configure/test any functional upgrade and manage data.
    Regards
    Yash

  • SAP Upgrade from ECC 5.0 to ECC 6

    Hello All,
    We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
    Thanks in advance for your response
    Anirban

    Hi,
    It has to be manually done for each and every program.
    Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
    Regards,
    Subramanian

Maybe you are looking for

  • How do I stop contacts from duplicating (and more) on my iMac?

    I swtiched from PC to Mac a couple months ago.  I did a lot of contact importing.  I also use iCloud to bring my contacts to my iPad2 and iPhone 4S.  The phone and iPad contacts seem to be ok, but the contacts on my iMac keep multiplying!  I have abo

  • How do I re-install the iTunes radio feature on my iPod Touch 5 running iOS7?

    Soon after installing iOS7 on my iPod 5, there was a new radio feature in the Music app. That feature has now disappeared. At the bottom of the Music app where the icons show for Playlists, Artists, Songs, and More..., Radio no longer shows. Does any

  • MIRO FI DOCUMENT NOT GENERATED

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Don't use ALL CAPS in your title.> Hi pls help me on this MIRO invoice posting ha

  • How to compare a parameter while calling a function?

    Hello, I have a powershell script with a function doing a switch process. While calling the function in the script I want to compare if the parameter is contained in the switch condition of the function. function test{ [CmdletBinding()] Param( [Param

  • My late 2011 15 inch mbp screen shuts down and don't turn on

    My late 2011 15 inch mbp screen shuts down and don't turn on. Sometimes goes down after it gets in the sleep mode but another times it goes down when i'm working on it. The battery lights and the magsafe light still work but the screen doesn't respon