SAP PI Backup: Cannot find InitSID profile backup

Dear Expert,
Im Finish install SAP PI 7.4 with database oracle 11g at windows server.
but, I will backup database (ABAP) with DB13 error:
I find profile backup at /oracle/SID/11203/dbs doest exist.
backup use profile initSID.sap.
please the advice..
regards,
Ruhul

Dear Reagan,
Infra team did only the Backup Restore of the Prod system and no Export Import of Prod using the sapinst.
Should I do the export import as it sounds by your and Pavan's reply that it might be required
We are doing Restore for Dual stack first time done the backup restore for ABAP stack a couple of times for ECC Quality refresh.
Should this be the option that I should select in sapinst for JAVA Export and JAVA Import:
JAVA Export
JAVA Import
Regards,
APS

Similar Messages

Mozilla cannot find my profile

After my latest Mozilla update, it cannot find my profile. I need to retrieve my emails as I have important information in there. How can I do it, is there a way to find my profile information?
Thanks
ladyrltr

My profile completely disappeared off my computer after an update. I tried the suggestion above but it did not help.

Macbook air restored from time capsule backup cannot find ms office product key

Had a moisture problem on my Macbook Air. Had to replace with newer pc as could not wait a week for repair. Had been using Time Machine and a Time Capsule hard drive to back up and the final backup was about 5 minutes before the spill.
So, I was able to fully restore the new laptop from Time capsule. Only problem is that I had purchased MS Office and while the programs are restored, when I launch MS Word, it wants the product code. I cannot find my cd and packaging with the product code from my original purchase. Any way to get the code off the Time capsule backup? It must be stored there somewhere but I wonder if it was encrypted and somehow linked to a physical something on the damaged MBAir.
I'm hoping to not have to buy MS Office again.
Thanks for any advice.
JC

Here you go:
http://support.microsoft.com/kb/2279109

Cannot find time capsule backup to restore

Hello - I have a MacMini (Intel Core 2 duo) runing OS 10.6.7. I used Time Machine to backup my data daily to a remote Time Capsule on my local network; I should also say at this point that I use Time Capsule to backup 4 machines in total. The hard drive crashed, and needed to be replaced. Now I am trying to restore my data to my computer. However, neither migration assistant nor time capsule can find the correct image (sparsebundle) to be mounted - for example, when I "Choose Time Machine Disk to Browse" no disks show up. Migration Assistant behaved a little differently, showing me 2 (out of 4) Time Capsule backups, but not the one relevant for this particular computer.
I know that backups have been performed, and I can manualy mount the specific Time Machine Backup through the finder - at which point I can "see" folders named "yyyy-mm-dd-xxxxxx," just as interesting is a file "yyyy-mm-dd-xxxxxxx.inProgress" - and which appears to be the latest date at which the folder was accessed. I have attached a screen shot of the contents of the folder.
Any thoughts? I really just need to restore the most recent backup, the rest are not necessary past this point.
Thanks!

Hi,
I just ran into the same problem, neither the Migration Assistant nor "Restore from Backup" from the 10.5 Install DVD would find a valid backup on my Time Capsule (which kinda renders it useless).
After some googling and trial and error I found a workaround using Terminal. I don't know why mounting the sparebundle image with Disk Utility wouldn't work, but it isn't available when your computer crashed anyway... So here is my method:
-Boot from the System DVD, choose the language
(-Goto Utilities and start the Disk Utility and reformat your drive, if on Intel check that you partition it with GUID, NOT Apple Partition Scheme NOR MBR, restart from DVD) only if something went wrong with your disk like in my case
-Goto Utilities and start Terminal
-In Terminal first make a directory for the mount, type: mkdir /Volumes/MyBackup
-Then mount the Time Capsule and link it to the folder you created, type: mount -t afp afp://myuser:mypassword@IPAdressOfMyTimecapsule/VolumeWhereMyBackupIs /Volume/MyBackup
-The AFP-Volume is now mounted, but you can't see anywhere.
-Quit Terminal, this will bring you back to the 10.5 Installer.
-Goto Utilities and choose "Restore System From Backup"
-The Dialog will ask you for a Backup Source. You should now see your Time Capsule and an already mounted Time Machine Volume at the location you specified in Terminal.
-Select the Time Machine Volume and press Continue, it'll take a while you show you all the backups, choose the one you want, choose a destination, drink tea.

I cannot find a profile for Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR

Hi, I have tried to download a profile for my D3100 kit lens - Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR but cannot find it in the Adobe Lens Profile downloader.
Adobe says that it is supported (two years ago: see it at this link from October 2010 http://blogs.adobe.com/lightroomjournal/2010/10 )
Since it is listed many places as being supported, it is frustrating that I cannot find it in the Adobe Lens Profile downloader.
Am I doing something wrong? Or can I download that profile without using the downloader. Can I use the lens profile that is shown with a different camera. I see similar lenses under D300 and D90 in the folder with about forty NIKON lens profiles (but only two for the D3100). However, under Lens Correction when I tick Nikon as model then I only see about seven lenses in the drop down list. How can I see the full contents of the folder?
Any help would be appreciated.
Thanks
PS. I was going to ask where the profiles are stored but luckily I have found them after a search.

I too would like to see this lens profile added to the list in Lightroom, in addition to the Nikon DX AF-S DX NIKKOR 55-300mm f/4.5-5.6G ED VR. I've found a similar version of the 18-55mm under the D40, but not for the D3200, and I haven't been able to find any profile matching the 55-300; only 55-200.

Startup error: Distiller cannot find ICC Profiles

I'm on Windows 7 with Adobe CS5 Design Premium. This has just started happening recently, and only occurs occasionally, usually disappears after a reboot.
Full message: Distiller cannot find its standard ICC profiles. Please reinstall Adobe Acrobat to correct this problem.
Thanks for any input!

Adobe Tech support was most helpful on this. First download the updated
Distiller ICC profile files at:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4075&fileID= 3790
Unzip the file and copy only the *.icc files (without regard to the subfolders that they are in - in other words, take the files out of each of the subfolders) to the followng folder in Windows 7:
c:\windows\system32\spool\drivers\color
These new files will probably overwrite some old ones.
This solved the problem for me.
This is actually the best solution though I found that instead of copying all the .icc files to the windows\sys... folder, all you need to do is copy the 3 Video files from the RGB folder (VideoHD.icc, VideoNTSC.icc, and VideoPAL.icc). Once you add these three files to c:\windows\system32\spool\drivers\color you will be good to go.
It seems that this was an error on the part of Adobe in that there is no reason to include Video files for printing. Nevertheless, the distiller will look for these and return the ICC profile error message if those files are not present.

I cannot find my profile to get to the personal dicitonary. Troubleshooting does not offer me this...

I need to correct mistakenly entered misspellings..
I cannot find the personal dictionary...

Please explain what your problem is so we can help.
Type '''about:support''' in the address bar and press enter.
Under the page logo on the left side you will see '''Application Basics.'''
Under this find '''Profile Folder.''' To it’s right press the button
'''Show Folder.''' This will open your file browser to the current
Firefox profile.

Cannot find HP profile on my Laptop to edit scanning

I cannot make any changes to my scan profiles, (change from Jpeg scan to pdf scan etc.) On other forums it states I must go to start, all programs and then click hp, but that is exactly the problem, I cannot find the HP profile Please help, I urgently need to change thisMany Thanks

Make sure that in Settings\General\Restrictions\Accounts that you have the tick in the option 'allow Changes' if Restrictions is active.
Unless your have our mail contacts set on your Mac to sync with another device under account options, (within your laptops mail program) then open iTunes, connect your device, go to its Info page by clicking on our device when t shows and changing from the summary tab to the info tab. Put a tick in 'Sync Contacts with' box, use the panel next to it to select which mail porgram to sync with, select any options available below this (will be greyed out if options are not available for a particular account).
When finished, scroll down the page to Advanced section and put a tick in Contacts box. Click 'Apply' and then 'Sync' to transfer settings.
Your mai programs will now stay in sync across Contacts. settings\General\iCloud Contacts should be on (as you said)
Note that if you use an exchange Mail Server email like Hotmail, then under Settings\Mail, Contacts, Calendars - tap on your Hotmail account under the Accounts setting at the top of the page and turn Contacts on to allow merge and syncing. Not all email accounts will have this option available - but Hotmail does.
Also not that some email accounts accessed through browsers will require you to go through their Settings and Options page to set up the sync of things like Calendars, Contacts and Notes - they are not alway by default given in the Accounts pages of Mail, Contacts, Calendars on your ipad.
Regards, Ct

Cannot find my profile folder on new installed TB 31.1.2 and new Mac OS10.9.5, can't get answer in FAQs.

I wish to move all my old mail folders from my old HD to a new HD and system, but can not find Thunderbird profiles in the new OS. I find them on the old HD. Is there a way to move them? Are they hidden files in the new HD and system? If so, how to proceed. Thunderbird is working well otherwise.
Thanks
Dick

Please stop and read what is being said.
You are being directed to an entry on Thunderbird help menu that is called troubleshooting information. In windows that menu looks like this
<img alt="" src="https://support.cdn.mozilla.net/media/uploads/images/2014-10-01-23-58-00-7624ba.png">
I don't use apple products, so I simply can not tell you what it looks like on a Mac, but I must assume similar as none of the documentation lists the help menu as containing differences between operating systems. Unlike options and preferences. There is also a three bar application menu on the toolbar which accesses the help menu. via an icon that looks like ?
Once you have located the menu entry and clicked on it you will see an application basics section in a very detailed report on your Thunderbird setup referenced by Zenos.

Can't complete Thunderbird backup, cannot find resource 11684 ?

Suddenly when I initiate MozBackup (version 1.5.1) to backup my Thunderbird files, as the processing bar comes to the end an error message pops up saying "Cannot locate resource 11684". When I click OK for this message, next error message says "Backup failed to complete".
Tried looking up this issue on FAQ but nothing seems to come up explaining what "resource 11684" is all about ? Any help will be most appreciated.

Was [http://mozbackup.jasnapaka.com/support.php#resource-missing this] the FAQ you read? Maybe running chkdsk would help, but in the meantime you can [https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile back up your profile] manually.

I cannot find corrupt iPhone backup file on my computer to delete it.

I have an iPhone 5s. It backed up to my computer (Mac) just fine until I got a new computer. I loaded all my backed up files onto the new computer (also a mac), from my airport extreme computer backup (also a mac product) and the next time I went to backup my iphone, it clearly says in the itunes window (where it would usually tell you your last backup date) that this phone had NEVER been backed up up on this computer. That would be fine with me and I would gladly create a new backup from what was on my phone currently except....When I click the backup button, it gives me the "could not back up the iPhone because the backup was corrupt or not compatible with the iphone. Delete the back up for this iphone, then try again" error message. I have followed every instruction of how to go about deleting these backups. I deleted every iPhone related backup through iTunes. Then I tried to find the files on the computer's hard drive outside of iTunes, but I swear there is no MobileSync folder on my computer. At least it's not at the path that is always given in every suggested solution.
I did create a separate user account (on the same computer) and was able to backup my phone through that. I don't know what that means, if anything, but I'd like my iphone to work with MY user account...
I've had a really difficult time finding the answer to this question online, so any help would be much appreciated.
Thanks!

i have figured it out, what you have to do is to restore your phone back to factory settings:
http://http://www.youtube.com/watch?v=2yBBiMy3Y6Q - youtube video to show you how incase you dont know
and then set up your phone as a NEW IPHONE instead of using iCloud
then plug it into iTunes - then i clicked on the iCloud thing to restore my new phone, and it should work, mine does hope this helps

R&R cannot find my only backup from the Hard Drive

I have been trying to install the Vista SP2 onto my SL400 and 0x80070490 came out every time, then I tried to restore to my backup made last summer, it wasn't detect by R&R but I know that the it must be in somewhere (or I will have a 160GB of hard disc but not 137GB, wit the Q and S drive, still only have <150GB space.) Anyone can help (both problem if possible)?
PS R&R 4.21.0015.00
SL400 Vista Business SP1

Hello horchan1216,
did you update your R&R version?
You´ll need the version of R&R which you have used at the time, you created the back up.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

HT1382 I have an ipod classic and have used it with iTunes on windows XP. recently upgraded to win7 and the latest iTunes and I cannot find away to backup or synch my files to a PC?

When I go to see devices in iTunes 11.1.xxx its grayed out. However when I connect it to a PC with Win7 it says its synching but cant find anything. Help if you can

Hey there oochow69,
It sounds like your iPod Classic is grayed out in iTunes when you connect it to your computer after a recent OS upgrade. I recommend the troubleshooting in the article named:
iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Thank you for using Apple Support Communities.
All the best,
Sterling

Firefox cannot find the Profile it looks for. I tried using Terminal but it cannot find the file to revise

Using OSX 10.5.8 on a macbook 2.1GHz Core 2 duo, 1GB 667MHz DDR2 SDRAM
Firefox 16.0.2, previously worked without problems

Hello GeoffKorten
go to ~/Library/Firefox (the tilde character (~) refers to the current user's Home folder, so ~/Library is the /Macintosh HD/Users/<username>/Library folder)
then find [http://kb.mozillazine.org/Profiles.ini_file profiles.ini] file and rename it to profiles.iniOLD , then when you start firefox again, a new default profile folder will be created and only a single profile, the new "default", will be listed in the Profile Manager.
This new "default" profile doesn't contain any of the profile data or settings stored in your old "default" profile folder, which still exists but is no longer accessible from the Profile Manager.
Your existing Firefox user profile data, which includes bookmarks, passwords, cookies, preference settings and added extensions, will no longer appear in the new profile but you can [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox transfer the data from the old profile folder to the new default profile folder].
see also : [https://support.mozilla.org/el/kb/Recovering%20important%20data%20from%20an%20old%20profile#os=mac&browser=fx17 Recovering important data from an old profile]
thank you

Your Firefox Profile cannot be loaded.It may be missing or inaccessable. Have tried all suggestions and cannot find my profile or fix it

I have bee using firefox for many years and seemed to have lost it. I downloaded again about 5 times,have tried all suggestions in the forums nothing worked.The only thing is I tried to recover my Profile default fold and it is missing. What can I do? I miss using firefox and would like you back

Hello All.
I've been using Firefox for a long time with a great pleasure of course. I've got today the same problem as you: my profile can't be loaded, missing or inaccessible. I tried all solutions but it was not OK.
Finally, as yesterday I've played with hiddens files in my home directory, I noticed that my "/home/myuser/.cache" was marked with a little padlock: it was access protected. So I just execute:
'''sudo chown myuser /home/myuser/.cache -R '''
and now Firefox is working fine.
I hope this way will be useful for you
Thanks

SAP PI Backup: Cannot find InitSID profile backup

Similar Messages

Maybe you are looking for