SAP PI: the quality of service EO vs. EOIO

Hello all,
I have a service (File -> XI -> RFC). If i use the quality of service "EOIO" in the file sender channel, the data from xml file could not be imported in backend system per RFC-call. If i use "EO"-Settings then the data could be saved in backend system without problem. Could someone tell, what is that problem? thx.
Best regards,
Fanglin

Hello Harisch,
i have read the discussion und tried to delete the messages using the following methods. It didn't work:
1. the report "RSXMB_CANCEL_MESSAGES": the message with Message-ID could not be found
2. the SMQ1, SMQ2 und SMQ3: the EOIO-Queue could not be listed.
In RWB there no options to cancel (or delete) the messages. I can only restart the first message:
Best regards,
Fanglin

Similar Messages

How does the quality of service in India compare to the United States?

I am currently in India and 12 hours from the closest Apple service center in Delhi. After the monsoon rains started my computer started acting up. At first some keys seemed to stick and I was able to solve the problem by attaching a USB keyboard. Lately the computer started crashing and then having trouble starting up again (an internet search suggests this could be a problem with the RAM). If I left the computer for a while it would start up and operate well for a bit but eventually crash again.
I took the computer into a computer repair shop here and he said that I should wait (3 months) until I go back to the United States rather than go through the trouble of traveling to Delhi to get the computer repaired. He also said that the quality of repairs is much better in the US. For example, in India they will put in second hard refurbished hardware whereas in the US they will use new hardware. The repairs in India will also take much longer than it would in the US. He recommended I get a cheap PC from him to use while I am here and get my mac repaired when i get back to the United States, he would then buy the computer back when I left.
I was wondering if anybody could share their experience or knowledge of the quality of service in India. Thank you.

And another quote from the fine manual:
Re Slideshow:
Rendering Preview Images
Aperture renders preview images in four situations:
When a library is upgraded—provided that the “Create previews for existing images” checkbox is selected in the Welcome to Aperture dialog
When an image is imported, or a version is created, rotated, or adjusted—provided that the Maintain Previews item is selected in the Library Action pop-up menu (with a gear icon)
When you Control-click the library, a project, or an image selection and choose Update Previews from the shortcut menu
Immediately before a slideshow, if the previews are not up to date, and the slideshow preset uses the Best quality setting
When rendering a group of preview images, Aperture uses the current application preference settings for compression quality and picture size, not the settings that were specified when preview rendering began. For example, if you have the quality set to 6, and then halfway through rendering you change the setting to 8, the previews that have not yet been rendered will be compressed at setting 8. Previously rendered previews are unaffected.
So, a high quality slideshow will require high quality previews, and indeed Aperture will render previews before rendering a slideshow, if the preview quality is not sufficient.
Regards
Léonie

Quality Of Service (BE,EOIO)...FIFO

Hi,
SAP XI has the concept of Quality of Service wherein they have BE, EOIO,EO.
Please can anyone tell me is this associated to a queue or a message. Also, if asociated to a Queue, where in SAO can we do this setting of making a Queue BE or EOIO.
And how do we associate a message to a particular queue?
Do we have the concept of FIFO..is this realted to Quality of service??
Please can anyone clear my doubt.
Thanks

Bhavesh,
I don't see any options available in RFC Sender adapter and in HTTP Receiver adapter to select the quality of service.
Do you know how to select that option? I know that once I select that option I need to mention a queue name.
We are at XI 3.0 SP14.
Please let me know ASAP.
Thanks
Kalyan

Need some clarifications on Quality-of-services

Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?

Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
Pls reward if useful

Quality of service

I had internet services with verizon when i lived in new york and i absolutely loved it. The service was the best, the customer service was excellent. Now that I have moved to the Atlanta metro area there is no available coverage from you in this area. Are you planning on providing services in this area at anytime in the near future? If so you definitely will not have any competition, because the quality of service is horrible by all the providers in this area. HELP!

I have not hear of Verizon (other than wireless) in Georgia at all....
Best of luck
Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

Quality of Service :Qos from Cloud Console 12.1.0.4

Hello,
After install a two node RAC with 12.1.0.2 and a Cloud Console 12.1.0.4 , I'm trying to Access to the Quality of Service Management option, from Cloud GUI.
But, to choose Dashboard or other options, appear this error:
Error
:Cannot connect to Quality of Service Management Server: Error while getting remote MBeanServer for url: ormi://rac1:23792/default
Specify Quality of Service Management Credentials
Specify the credentials to connect to Quality of Service Management Server.
Is necesary start any agent?
Which will be the correct credentials? Grid user?
Many thanks
Arturo

Hi,
IT should be Enterprise manager platform,
--> Please check the OMS, Agent status,
For OMS:
export the OMS_HOME=
emctl status oms -details
for Agent
As installed user : oracle
export the AGENT_HOME
emctl status agent.
Pls try to clean shutdown and restart the OMS
emctl stop oms -all
make sure no oms process is running .. ps -ef | grep -i oms
emctl start oms..
=====
select OWNER, TRIGGER_NAME, TRIGGER_BODY from DBA_TRIGGERS where trim(TRIGGERING_EVENT) = 'LOGON';
If this returns any values, disable the logon trigger and attempt to configure again.
===
Regards
Krishnan

Change "Quality of Service" EOIO to EO for a XI Purache Interface in EBP

Hello Colleagues,
we have a PO interface in place but some problems with Message processing at Adapter. To solve the problem we try to change the Quality of Server EOIO to EO but the Quality of Service comes from the EBP system at XML Message header.
Please, in that location on the EBP system are we able to change the Quality of Service?
Many thanks in advance!
Jochen

Hi Barry,
The EBP system send POs (also calalog messages) via integration engine (SXMB_MONI on EBP) to the XI system (Integration Server) and the XI system sends the messages out to the Vendor via SOAP.
The messages which are send by EBP are with QOS EOIO at message header.
Regards,
Jochen

Quality of Services "Exactly Once in Order"

Hi,
I have several integration using iDOC output R / 3.
This integration into the Integration Builder them removed brand "Maintain Order At runtime" (Quality of Services - Interface Determination) to be executed in parallel, but when they reach the engine J2EE appear with the Quality of Services as "Exactly Once in Order."
Why this happens with iDOCs? . With RFC do not have this problem.
Best Regards
Julian.

Hi
I have been reviewing the integrations that run in parallel and gave the impression that really do not run in parallel (Quality of Services "Exactly Once"), but that the channel receiver is taken so that the previous interface ends of inserting data into the receiver.
If open the message and revise the log, the first message that arrives is in this state:
"JDBC adapter receiver channel JDBC_XXX_YYY_Receiver: started processing; Party, service ZZZ_BS "
But the following is not enough to reach this state and it is with this log:
"Receiver JDBC adapter: started processing; QoS required: ExactlyOnce "
One step before the first message, only runs the next step when the first message ends to be processed by the adapter.

How to determine quality of service of communication between XI and R/3

Hi All,
Suppose we are sending data through R/3 to XI using outbound abap proxy to XI. My query is how do we determine which quality of service (EO or EOIO) will be used for this communication. I have seen normally it is EO ( or BE, in case we are using execute_synchrounous function).

Q0S:
http://help.sap.com/saphelpnw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
adapter types and QoS:
http://help.sap.com/saphelpnw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://help.sap.com/saphelpnw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
http://help.sap.com/saphelpnw04/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm

Change Quality of Service Message

Hello,
I've a interface IDOC - JDBC. The quality of Service is EOIO.
II want to change this quality to EO
How can i do it? Where?
thank very much,

I think you receiver determination have multiple messages (i.e branching of the messages in interface determination) as a result quality of service changed to EOIO..
In order to make EO for the same remove the check box option Maintain order at runtime in interface determination for the same and try
HTH
Rajesh

XI3.0 - Quality of service EOIO file adapter

Hi,
I have a number of IDOCS that are sent from a WAS6.40 system using a qRFC queue. These IDOCS are then sent to a number of receivers and inbound interfaces.
A large number of the receivers are file adapters for which I would like to be able to disable the EOIO handling.
Is there anyway to amend the quality of service?
Regards
Ian

Hi Ian,
I was trying to check your scenario and ran into something that has really confused me...
The table on Xi which holds the interface determination s entries is SMPPREL3, now if you check the field QUALITY, its description says ...
Processing Sequence ('X' = EO, SPACE = EOIO)
and this field should correspond to 'maintain order at runtime' property of interface determination...
usually with ABAP "X" means selected and space means 'not selected'....
now can you see in this table for your particular entry and the value in this field....if it is space or 'X'....
May be this is just a "typo" by whoever created the table
Thanks,
Renjith

Quality fo service to receivers.

do we have the quality fo service to receivers.I mean EO,EOIO,BE

Hi,
do we have the quality fo service to receivers.I mean EO,EOIO,BE
No.
BE (Best Effort):
The message is sent synchronously. The sender waits for a response before it continues processing.
EO (Exactly Once):
The message is sent asynchronously. The sender does not wait for a response. The Integration Engine Extern guarantees that the message is sent and processed exactly once.
EOIO (Exactly Once In Order):
Messages are delivered with the same queue names (supplied by the application) in the same sequence that they were sent from the sender system. Message processing is asynchronous in this case.
In the case of quality of service BE, an error occurs if more than one receiver is determined Seite 468 for a message. In the case of delivery types EO and EOIO, the message is copied correspondingly and sent to the individual receivers.
Synchronous Message Processing (BE)
The message is not persisted by the Integration Engine. Once a message has been processed in the target system it performs an implicit database commit.
Asynchronous Message Processing (EO, EOIO)
The message is persisted by the Integration Engine at a predefined time and scheduled for processing using the queued RFC Extern (qRFC).
Thanks
Vikranth

Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?

Hi,
    We are building an IDoc to File scenario in SAP PI 7.1, where a single incoming idoc will create three different output files. Also files must be created in target server in a specific order.
    Our first idea to ensure that files would be created following a specific order was that Message mapping (in Java) build target payload with all three files following expected sequence.
    In addition, receiver file/ftp adapter is setup with a dynamic variable to create each file with a different filename adding also timestamp.
    Testing the scenario, we see that three files are created in target server but when we sort them by creation date, it seems they don't follow always same sequence.
    Sometimes adapter creates File1, File2, File3; next time it created File2, File1, File3 and so on.
    Our problem is that files must be created always with a specific order and we cannot use BPM. Does anyone know if a receiver file/ftp adapter can be setup to create files following specific sequence (EOIO)?
    I know that sender file/ftp adapter can be setup with a quality of service, but I didn't find anything similar for Receiver file/ftp adapter.
    Suggestions will be welcome.
Kind Regards,
Aitor

Hi,
     First, thanks all of you for your quick answers. They were helpful because we learnt a new configuration setting.
     We tried your suggestions but they didn't really fix our problem.
     Finally interface has been re-designed and we will not have to apply this logic, so no issue from our side.
     However, let me continue with this topic in case that somebody else will have the same issue, then it will be able to review this thread.
     When adapter created the files in the target directory (windows server), files had the expected timestamp in each filename. However, if we sorted windows directory contents by "Date Creation", files were sorted different that timestamp shows in the filename.
     For example, adapter created following files:
File1_20090325-115117-169
File2_20090325-115117-174
File3_20090325-115117-180
     But when we sorted windows folder contents, files were sorted as follows:
File2_20090325-115117-174
File1_20090325-115117-169
File3_20090325-115117-180
     It seems that timestamp was pre-assigned by the adapter, but when adapter created the files, it did it with a temporary name and finally assigns the filename. If a file size was bigger than other, maybe it takes more time and windows creation date is higher.
     If so, it means that adapter is not following same instructions as itu2019s indicated in "maintain order at runtime" checkbox.
     Do you know if there is any way where we can push also the order in the adapter as we did in interface determination?
Regards,
Aitor

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

Quality of service (QOS) is disabled in the HTTP service. Unable to tur...

Hi,
"Quality of service (QOS) is disabled in the HTTP service. Unable to turn on QOS features." this message is seen and server restart itself. Why this occur?
Thanks..

That message is logged when you have QOS disabled. Check http://docs.sun.com/source/817-1831-10/agsnmp.html#wp999778 for information on enabling QOS.
However, the server should not crash/restart. Please describe the steps to reproduce the problem.
Message was edited by:
Arvind_Srinivasan

SAP PI: the quality of service EO vs. EOIO

Similar Messages

Maybe you are looking for