SAP PI7.31 : Mail with multiple attachments - how to process via UDF
Hi
wondering how I can approach this problem. I have to read an Email with any number of attachments - it can have between 1 and 4 or maybe more of different types (CSV,XLS,PDF,ZIP). I need to read this email and extract the attachments to a folder.
Just to let you know I have done this OK for an email that I know only has 2 attachments ! Works perfectly - just no good for ?n? attachments !
Mail Sender has AF_Modules/MultipartHeaderBean to add payload Attributes
The message is sent to 2 Receivers
Each Receiver File adapter then uses AF_Modules/DynamicConfigurationBean and AF_Modules/PayloadSwapBean
Problem is that when I do not know how many attachments there are. So I will have to write a Java UDF mapping, perhaps using the classTransformationInput.
My question is : To create a Java UDF what should be structure of a sent Email message Type look like so I can feed that into a UDF to check what payload attachments there are etc ?.
As long as you use java mapping, you can have any dummy structures for your interfaces.
But, if you prefer to use graphical mapping with UDF, then you should have some valid structures for your mail and file interfaces. e.g., mail pack XSD for mail interface as metioned by Indrajit Sarkar
and again the same structure for the file interface as well so that you can have one to one mapping an then make use of UDF code from the article. Use payload swap bean in the receiver file channel to replace xml payload with Zipped attachments and then finally use script to unzip this zip file.
Rgds,
Praveen Gujjeti
Similar Messages
-
Sending mail with multiple attachments in jsp
hi .I wrote a code to send a mail in jsp.but now i need to send mails with multiple attachments.how can i send mail with multiple attachment.
Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over. -
Sending mail with multiple attachments
hi.I wrote a code to send mail.but i need to send mail with multiple attachments.here is the code i wrote.what should i do to send the mail with multiple attachments.if i run this code iam able to send mails but not attachments.please help me
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
String Attachfiles1="";
String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
try
String subject="",from="",url = null,to="";
String mailhost = "our local host";
Properties props = System.getProperties();
String msg_txt="";
String strStatus="";
// byte[] bin=.....;
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
<form action="Composemail.jsp" method="post">
<b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>           <input type="text" name="to" size="72"><br>
<b>From :</b>       <input type="text" name="from" size="72"><br>
<b>Subject :</b>   <input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
            <textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b> <input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b> <input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b> <input type="file" name="fieldname3" value="filename" size="50"><br><br>
            <input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over. -
File to Mail with multiple attachments
Hi All,
I am doing file to mail scenario in which iam including attachments.
I am able to send one attachment(i.e., .txt) from file to mail.
My requirement is i need to send both .txt and .xls .Please let me know the procedure for sending multiple attachments(probabaly without any abap coding or .jar files usage).
regards
MadhuHi Madhu,
Using the default modules PayloadSwapBean and MessageTransformBean you can able to send multiple attachments.
swap.keyName :payload-name or payload-description or content-type, content-description. swap.keyValue: If you have a multiple attachments then give the multiple key value.
Like you have payload name
Attachment1, Attachment2 then
swap.keyName payload-name
swap.keyValue Attachment1, Attachment2
Using the MessageTransformBean you can able to change the file name.
PayloadSwapBean:
[http://help.sap.com/saphelp_nw70/helpdata/EN/2e/bf37423cf7ab04e10000000a1550b0/content.htm]
MessageTransformBean:
[http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
Regards,
Prakasu -
Sending UTL_SMTP mail with Multiple attachment
Hi,
My Environment ----> Oracle Database 11g r1 on Windows 2003 Server (64Bit).
The below script i used for sending mail with single attachment now i am trying to send mail with multiple attachment please tell me how to achieve this
DECLARE
/*LOB operation related varriables */
v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
l_buffer RAW(54);
l_amount BINARY_INTEGER := 54;
l_pos INTEGER := 1;
l_blob BLOB := EMPTY_BLOB;
l_blob_len INTEGER;
v_amount INTEGER;
/*UTL_SMTP related varriavles. */
v_connection_handle UTL_SMTP.CONNECTION;
v_from_email_address VARCHAR2(30) := '[email protected]';
v_to_email_address VARCHAR2(30) := '[email protected]';
v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
/* This send_header procedure is written in the documentation */
PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(v_connection_handle,
pi_name || ': ' || pi_header || UTL_TCP.CRLF);
END;
BEGIN
/*Preparing the LOB from file for attachment. */
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
l_blob_len := DBMS_LOB.getlength(l_blob);
/*UTL_SMTP related coding. */
v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
UTL_SMTP.OPEN_DATA(v_connection_handle);
send_header('From', '"Sender"');
send_header('To', '"Recipient"');
send_header('Subject', v_subject);
--MIME header.
UTL_SMTP.WRITE_DATA(v_connection_handle,
'MIME-Version: 1.0' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: text/plain;' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' charset=US-ASCII' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Close Email
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
UTL_SMTP.CLOSE_DATA(v_connection_handle);
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
EXCEPTION
WHEN OTHERS THEN
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
RAISE;
END;
Thank you
ShanHi Saubhik
Thanks for your reply, below script i used to send mail with multiple attachments, plsql code is executing without any error messages and i am also able to receive mail with the multiple attachment.
i used your code which u posted in OTN then i changed little bit as per my need, output is ok.but the problem is if i want to add one more file then i have to add more varaiables in the code. i want to make the code which i can add more attachments without adding more varaiables i don't know the way to do this. can u please give me some hints.
Thanks for your help
Shan
Script Used:
DECLARE
/*LOB operation related varriables01 */
v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
l_buffer RAW(54);
l_amount BINARY_INTEGER := 54;
l_pos INTEGER := 1;
l_blob BLOB := EMPTY_BLOB;
l_blob_len INTEGER;
v_amount INTEGER;
/*LOB operation related varriables02 */
v_src_loc2 BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT1.LOG');
l_buffer2 RAW(54);
l_amount2 BINARY_INTEGER := 54;
l_pos2 INTEGER := 1;
l_blob2 BLOB := EMPTY_BLOB;
l_blob_len2 INTEGER;
v_amount2 INTEGER;
/*UTL_SMTP related varriavles. */
v_connection_handle UTL_SMTP.CONNECTION;
v_from_email_address VARCHAR2(30) := '[email protected]';
v_to_email_address VARCHAR2(30) := '[email protected]';
v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
/* This send_header procedure is written in the documentation */
PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(v_connection_handle,
pi_name || ': ' || pi_header || UTL_TCP.CRLF);
END;
BEGIN
/*Preparing the LOB from file for attachment01. */
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
l_blob_len := DBMS_LOB.getlength(l_blob);
/*Preparing the LOB from file for attachment02. */
DBMS_LOB.OPEN(v_src_loc2, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob2, TRUE); --Create temporary LOB to store the file.
v_amount2 := DBMS_LOB.GETLENGTH(v_src_loc2); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob2, v_src_loc2, v_amount2); -- Loading from file into temporary LOB
l_blob_len2 := DBMS_LOB.getlength(l_blob2);
/*UTL_SMTP related coding. */
v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
UTL_SMTP.OPEN_DATA(v_connection_handle);
send_header('From', '"Sender"');
send_header('To', '"Recipient"');
send_header('Subject', v_subject);
--MIME header.
UTL_SMTP.WRITE_DATA(v_connection_handle,
'MIME-Version: 1.0' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: text/plain;' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' charset=US-ASCII' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment01
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment02
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export1.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos2 < l_blob_len2 LOOP
DBMS_LOB.READ(l_blob2, l_amount2, l_pos2, l_buffer2);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer2));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer2 := NULL;
l_pos2 := l_pos2 + l_amount2;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Close Email
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
UTL_SMTP.CLOSE_DATA(v_connection_handle);
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
DBMS_LOB.FREETEMPORARY(l_blob2);
DBMS_LOB.FILECLOSE(v_src_loc2);
EXCEPTION
WHEN OTHERS THEN
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
DBMS_LOB.FREETEMPORARY(l_blob2);
DBMS_LOB.FILECLOSE(v_src_loc2);
RAISE;
END;
PL/SQL procedure successfully completed.
Edited by: SHAN2009 on May 11, 2011 1:05 PM -
Sending email with multiple attachments
Hi forum,
I am able to send email with a single attachment using maildemo.sql from: http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
But now I am trying to send email with more than 1 attachment and it does not work. My code that calls the above mentioned package is as follows:
<code>
PROCEDURE send (
psender VARCHAR2,
precipients VARCHAR2,
pcc VARCHAR2,
pbcc VARCHAR2,
psubject VARCHAR2,
pmessage VARCHAR2,
pnumattach NUMBER) -- The number of attachments that need to be sent
IS
p_blob BLOB;
p_filename VARCHAR2(200);
p_filetype VARCHAR2(200);
p_currSeq NUMBER;
conn utl_smtp.CONNECTION;
i NUMBER;
j NUMBER;
len NUMBER;
BEGIN
IF pnumattach > 1
THEN
conn := SEND_EMAIL_HELPER.begin_mail(
sender => psender,
recipients => precipients,
subject => psubject,
mime_type => send_email_helper.MULTIPART_MIME_TYPE);
j := 0;
SELECT seq_attach_transact_id.CURRVAL INTO p_currSeq FROM dual; -- seq_attach_transact_id is a primary key that identifies every single attachment in the table
WHILE (j < pnumattach) LOOP
p_currSeq := p_currSeq - j;
SELECT blob_content INTO p_blob FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT name INTO p_filename FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT mime_type INTO p_filetype FROM wwdoc_document WHERE transaction_id = p_currSeq;
SEND_EMAIL_HELPER.begin_attachment(
conn => conn,
mime_type => p_filetype,
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH;
END LOOP;
SEND_EMAIL_HELPER.end_attachment(conn => conn);
END LOOP;
SEND_EMAIL_HELPER.attach_text(
conn => conn,
data => pmessage,
mime_type => 'text/html');
SEND_EMAIL_HELPER.end_mail( conn => conn );
ELSE
utl_mail.send(psender,precipients,pcc,pbcc,psubject,pmessage);
END IF;
END send;
</code>
Can anyone please tell me where am i going wrong.
Message was edited by:
MonkThe easiest is to send an e-mail with multiple attachments to yourself and then view the message in raw to see how it is formatted - how the boundaries work. what the boundary headers are, etc.
Then you use that as a template for your PL/SQL code to generate a MIME body for an e-mail that has multiple attachments.
To debug.. have your PL/SQL code send sample e-mails with multiple attachment to your account, view it in raw format and compare that to the original format you've based your template on.
And none of this is really a PL/SQL issue.. it is all about formatting a valid MIME message for an e-mail. -
How to send the mail with multiple file attachments ?
Sending mails with multiple files as attachments.
You need to start from the app, assuming that it has an email function, that contains the files that you want to send as attachments. The Photos app allows you to send up to 5 photos on the same email, but if you want to send multiple file types then you need an app that supports all those file types. I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.
-
Sending mail with multiple attachment
hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
jobname like TBTCJOB-JOBNAME,
L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4) VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_desc1 TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des,
gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
p_email like somlreci1-receiver,
END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
to sap-spool
with line-size = '255'
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' '
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
from ymail
where ytcode = 'YMIS008'.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
USING SELECTION-SET 'MAIL'
to sap-spool
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' ' "SPACE
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
gd_attachment_desc1 = 'YMIS10'.
gd_mtitle = 'Monthly Sales Report'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf1.
loop at it_mess_att.
move it_mess_att1 to it_mess_att.
APPEND it_mess_att.
endloop.
APPEND LINES OF it_mess_att1 to it_mess_att.
free it_mess_att1.
it_mess_att[] = it_mess_att1[].
insert LINES OF it_mess_att1 into it_mess_att.
APPEND LINES OF it_mess_att2 to it_mess_att .
insert LINES OF it_mess_att1 into it_mess_att.
insert LINES OF it_mess_att2 into it_mess_att.
loop at ymis008tab into mailstr.
p_email1 = mailstr-p_email.
p_email1 = '[email protected]'.
PERFORM process_email.
endloop.
clear mailstr.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ELSE.
SKIP.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att1 = gd_buffer.
APPEND it_mess_att1.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
it_mess_att1
using "p_email
gd_mtitle
'Testing mail generated from SAP'
'Daily Highlights Abstract Report - YPP18'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
it_attach1
using "p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
ArpitHi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John. -
mail with multiple gmail accounts sending messages from wrong email, other than the one i select:
i'm using mail on osx 10.7 with multiple gmail accounts. when i create an email, i check to be sure i'm sending/replying from the correct account. after i send it, somehow it actually sends it from a different account, other than the one i've selected "from." this is evidenced by the reply email i receive. how can i fix this?
in preferences, i have "send new messages from : account of selected mailbox"From the Mail menu bar, select
Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
Send new messages from:
choose
Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
Card ▹ Make This My Card
from the menu bar. -
Send Mail with Multiple Attachment
How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
We dont want save the documents into hard disk and attach to mail. Please Help
If you have java procedure or Pl/Sql Procedure. I think pl/sql cant. So please mail me code to [email protected] mail id. Thank you.
Thanks in advance
SelvamHi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg, .
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam -
Issue with multiple attachments in email program
Hi All,
i need one program which sends 3 excel sheets as an atatchments. in these attachments data should be separated by tab. i am not able to find suitable program for the requirement anybody can send me the code .
thanks,
maheedharhi,
Refer to this link...
send mail with multiple excel attachments
Cancatenate fields of internal table CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB to get the tab position between the fields. -
Sending mail with 2 attachments
Hi All,
I have a requirement where I have to send a mail with 2 attachments. Both attachments should be excel sheets.
Iam using the function module
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = gd_sent_all
TABLES
packing_list = it_packing_list
contents_txt = it_message
contents_bin = it_attachment
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
I don't know where to pass another attachment.
How can it be done?
Kindly help me.
Regards,
KrithikaHi,
Try this code.
you have to populate both packing_list and contents_bin internal tables before passing to the fm SO_NEW_DOCUMENT_ATT_SEND_API1
FORM CONVERT_OTF_TO_PDF TABLES OTFTAB STRUCTURE OTF.
CLEAR: SOOD, W_LINES, CONTENT_IN, CONTENT_OUT.
REFRESH: CONTENT_IN, CONTENT_OUT.
DESCRIBE TABLE OTFTAB LINES W_LINES.
SOOD-OBJLEN = W_LINES.
REFRESH: CONTENT_IN, CONTENT_OUT.
CLEAR: CONTENT_IN, CONTENT_OUT.
CONTENT_IN[] = OTFTAB[].
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'HPLJ5SI'
* FUNCPARA =
LEN_IN = SOOD-OBJLEN
* IMPORTING
* LEN_OUT =
TABLES
CONTENT_IN = CONTENT_IN
CONTENT_OUT = CONTENT_OUT
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2.
REFRESH OBJBIN. CLEAR OBJBIN.
IF GV_SUMMARY <> 'X'.
OBJBIN[] = CONTENT_OUT[].
ELSE.
REFRESH CONTENT_OUT.
CLEAR CONTENT_OUT.
ENDIF.
REFRESH: CONTENT_IN, OBJPACK.
CLEAR: CONTENT_IN, OBJPACK.
DOC_CHNG-OBJ_NAME = TEXT-003.
IF SY-SYSID NE 'S4P'.
IF DOC_CHNG-OBJ_DESCR IS INITIAL.
DOC_CHNG-OBJ_DESCR = TEXT-004.
ELSE.
IF GV_SUMMARY = 'X'.
DOC_CHNG-OBJ_DESCR = TEXT-012.
ENDIF.
ENDIF.
ENDIF.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Fill the fields of the packing_list for the main document:
CLEAR OBJPACK.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
OBJPACK-OBJ_NAME = 'Attachment'.
OBJPACK-OBJ_DESCR = C_PAYER.
READ TABLE OBJBIN INDEX TAB_LINES.
DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-DOC_SIZE = DOC_SIZE.
APPEND OBJPACK.
CLEAR OBJPACK.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
OBJPACK-OBJ_NAME = 'Attachment'.
OBJPACK-OBJ_DESCR = C_PAYER.
READ TABLE OBJBIN INDEX TAB_LINES.
DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-DOC_SIZE = DOC_SIZE.
APPEND OBJPACK.
REFRESH RECLIST.
CLEAR RECLIST.
** get E-mail address
IF NOT P_EMAIL IS INITIAL.
RECIPIENT_INT-ADDRESS = P_EMAIL.
ENDIF.
RECLIST-RECEIVER = RECIPIENT_INT.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
* SEND THE DOCUMENT BY CALLING THE SAPOFFICE API1 MODULE
* FOR SENDING DOCUMENTS WITH ATTACHMENTS
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
IMPORTING
SENT_TO_ALL = SENT_TO_ALL
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
Regards,
Sailaja. -
TS4002 Mail with multiple Bcc shows "sent" but was never delivered to anyone. Help?
Mail with multiple Bcc shows "sent" but was never delivered to anyone. Help?
Any guess at how to fix it or is a reinstall in my future?
Start by looking at the logs for an example. There will be some indication in the logs as to what happened to the message.
Depending on how busy your server is, this might be as simple as tail -f /var/log/mail.log while you send such a message from your mail client. -
I am new to IPAD use and need to forward one attachment from an original email that contains multiple attachments - how can I isolate and forward only one of the attachments?
Aha! I have been doing just that. However, what has been tripping me up is that I am also used to clicking the Go Online/Go Offline toggle button on the top menu bar when I manually check for messages on Cox. Apparently when you take one inbox offline, that button switches to Off even though the other inbox is still online. If I just ignore that button and go on or off via the cox mailbox listing, it keeps comcast from being reactivated.
Thanks so much for helping me think this through.
Edited to add: I removed that dang button from my menu so I can stop clicking it. -
When viewing the weather default app with multiple cities, how come there isn't a one click shortcut to go back to the first city?
3.2 you can make multiple clocks, each clock can have a different alarm.
Maybe you are looking for
-
RS480M2 - environmentals - have I got a problem?
Hi, Well what a MB to pick for my first build ;-) Thanks for all the great advice on this site. After a problem that turned out to be RAM based (not compatible although passed memtest86 for over 20 hours; replacement seems fine now) I'm wondering if
-
Timing of Report (function body returning sql) w/ pagination
Hey - Wondered if someone can provide some insight here... I have a report that is dynamically created by calling a function that returns sql. Since it may return a few hundred results I have pagination turned on allowing the user to choose rows per
-
Connecting To An Access DB On A SharePoint Site
I am attempting to use an Access (2007) db (.accdb) file located on a SharePoint site and am encountering problems connecting to it. The paths I have tried are: http://xxx.yyyyyyy.company.com/sites/xxxx/TeamSite/buildsupport/MW/Work%20Effort/Access_
-
Convert BIGINT Timestamp to a Datetime???
I have the following date in Bigint 130234176000000000 how to convert it to a proper date? The command below gave me an error select dateadd(second, (Convert(bigINT,convert(varchar,[Time])))/1000 + 8*60*60, '19700101') I did the command below b
-
Set attribute value using plugins
Hi Experts, I am facing error when setting the value of attribute in the event "OnInvestigationStartedEvent". Any suggestion to fix the issue code: Session ses = onInvestigationStartedEvent.getSessionContext().getInterviewSession().getRul