SAP PLUG IN's

Dear All,
I have applied the patches using Spam, and going to apply plug in's, I got the documentations that plug in's are applied using SAINT, when I use saint after extracting the car files it is not showing the list of plug in's and it is also mentioned that plug in's are installed from the user that has SAP_ALL profile other than sap* and ddic, what I am finding out that are able to install the plug in's from ddic also, what to do, I am confused what is the right procedure, Even we are able to install the ADD on's from SPAM, Please guide me?
Ravi.

Dear,
"support packages for this add-ons using the tcode SPAM".
This line means that there are two things, what I have done is downloaded that car file that is shown in front of which it is named as PI, PI_BASIS, etc, this car files can be uplodad using SAINT or SPAM, I agree. After that I clicked on Display/Define and selected the module, as PI, has shown in the Queue, after that I clicked on import queue( Same case when we use to upload patches), after that prolouge, add_on conlict etc.. then message came that plug in is installed according to scenario, I confimed it, Now this plug in in showing in SPAM, status green, and showing in saint alsoin the level, feild. After this what I have to do?

Similar Messages

Difference between SAP Add on and SAP Plug-in

Dears:
If there any difference between SAP Add on and SAP Plug-in? If the t-code is the same?SAINT?
Edited by: Neeraj Chang on Jan 28, 2009 3:25 PM

Read,
http://help.sap.com/saphelp_em51/helpdata/en/4e/6152653359c6478edd0b5b27b64d9c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/26/5a8c38e3494231e10000009b38f8cf/frameset.htm
Yes, you use SAINT to install both and SPAM to patch them
Regards
Juan

SAP authentication plug-in needs to have been selected during the installation

Can anyone help me with an issue I have with the SAP authentication setup please. Unfortunately our BI 4.0 SP4 installation was installed without the SAP authentication being selected. On the setup document I have it says that the SAP authentication plug-in needs to have been selected during the installation. Does anyone know if it is possible to set this up retrospectively?
The document can be found on the following link. Setting up the SAP plug-in - Business Intelligence (BusinessObjects) - SCN Wiki
Thanks
Simon

Hi Simon,
As Sebastian said, this is a default installation, but you must select the correct one that you need, I guess that Enterprise is the default one.
Regards

How to implement SSO to non-SAP systems using SAP logon ticket?

Hello,
We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
Can anyone please give me some leads on this, in particular:
1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
Roy

Hi,
I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
Here are some links you might want to check:
OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
wss4j: http://ws.apache.org/wss4j/
shibboleth: http://shibboleth.internet2.edu/
opensso: https://opensso.dev.java.net/
On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
Hope this is helpful...
Let me know if you need further assistance on this topic
Cheers

SAP R/3 as data source for Essbase

Hi everyone,
We need to extract data from a SAP R/3 data source (Is SAP R/3 the same as SAP BW?).. Can we directly connect to it then load data to Essbase?
I've read that we need Hyperion System 9 BI+ Analytic Integration Connector for SAP BW to get data from SAP BW. Is it easy to implement?
Hope someone could help me. Thanks in advance.
Sam

Hi everyone,
I've read that Essbase can connect directly to SAP R/3 through the SAP Plug-in in the Administration Services. We just need to configure the connection to it properly.
Here's my question, since we are suppose to enable the SAP plug-in DURING the "custom" installation of Admin Services, how do we then enable it since our application is already in use? Installation & configuration of admin services has long been done. Is there a way to go back to enable the SAP plug-in so we can connect to SAP R/3? If not, are there other ways to do it?
Hope somebody could help me. Thanks a lot.
Sam

SAP NetWeaver 7.0 (2004s) - Missing files for the Studio?

Hi,
The installation of Netweaver Developer Studio seams to be quite incomplete: there are all the eclipse plugin-ins missing and several SAP plug-ins too (Installation wizard ends with the error message: the following files where not found on the installation media:....). On the downloaded DVD-iso the plug-ins are also not present.
Was that a problem with my download (which i don't think, cause the server installation was successful and it's up and running)?
Best Regards
Alex

Wow, wow, wow.....guys, keep calm!!
I did not expect that massive answers and engagement...unbelievable!!
Cheers, alex

How to stop collecting CIF queues in SAP ECC.

We had implemented SAP Plug-In CIF for live data transfer between R/3 and APO ., now that we stopped using APO, we want stop collecting data in CIF relevant queues in R/3 system.
Deleting or changing RFC destinations didn't help as queues are still being collected with 'fail' status.
So is there anyway to stop collecting these queues.
Regards,
Laks

Hi Laks,
Step 1 & 2 will solve your problem but
Step1.Deactivate all Integeration model
Step2.Change Material master MRP Type from X0 and Relevant to APO inidcator (APOKZ).
Apart from the above you can also lookinto below steps
CIF Settings in R/3 :-
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Assign target system and queue type CFC1
Maintain the SAP APO release NDV2
Activate BTEs for SAP APO integration BF11
User parameters for CIF CFC2
Rgds
Samir

Problem in inst. ST-PI & Upgd. of PI_BASIS

Hi All,
We are in the process of upgrading SAP 4.7 to ECC 6.0
We have upgraded our Oracle from 9i to 10 g and run the upgrade prepare.
Now upgrade prepare statistics says that we need to upgrade ST-PI & PI_Basis.
Currently we have (SAP R/3 4.7*200):
Kernel: Release 640, Patch Level: 295, ABAP Load: 1521
SAP Basis: 620 SP49
SAP_ABA: 620 SP49
PI_BASIS: 2004_1_620
ABAP_PLUS: 100 SP13
ST-PI: There is no entry in my system
I have tried to install ST-PI with the CD KITLRCA.CAR and upgrade the PI_BASIS through the CD 51030956.
But in SAINT (tried in SPAM also) t-code after uploading the CDs the entry of the ST-PI & PI_BASIS_2005 is not appearing and hence not able to upgrade these two components.
Please suggest how to install ST-PI with SP8 and 2005_PI_BASIS?
Regards,
Souren

Hi Souren Sharma,
I think you have entered the wrong package or have not implemented the packages atall.(Only uploaded the the packages)
Download below packages from service market place.
https://websmp102.sap-ag.de/swdc
Download->Installations and Upgrades->Installations and Upgrades - Entry by Application Group->Plug-Ins ->SAP Solution Tools->ST-PI->ST-PI 2005_1_620->Installation
Then download below file.
SAPKITLQGA SAP Solution Tools Plug-In (ST-PI 2005_1_620)
Then download the support package for ST-PI
Support Packages and Patches - >Entry by Application Group ->Plug-Ins->SAP Solution Tools->ST-PI>ST-PI 2005_1_620
SAPKITLQG8
Download 2005_PI_BASIS
Download->Installations and Upgrades->Installations and Upgrades - Entry by Application Group->Plug-Ins ->SAP Plug-In ->PI_BASIS->PI_BASIS 2005_1_620->Delta Upgrade
Download below file
PI_BASIS 2005_1_620
Delta Upgrade
51030955 CD PI Basis 2005.1_6.20 Inst./Upgrade
Apply the plug-ins in SAINT and support package in SPAM.
You may have to apply all support packages upto SAPKITLQG8
Regards
Ashok Dalai

Use of U perform tool.

Hi Experts,
where use the U perform tool while BBP preparation or any stage in implementation project.
My client ask me about these u perform tool.
regards,
AVI DDS.

Hi
RWD uPerform records your actions in Microsoft Windows,web-based, and enterprise applications, and outputs a professionally formatted document and simulation. You can capture screens, buttons, edit fields, and more in the target application.
The recording process captures information to simultaneously produce both a simulation view and a document view of procedural content.
RWD uPerform captures actions in the following target applications:
❐ Standard Microsoft Windows and web browser applications: Support for these
applications is provided in the uPerform base recorder. Application adherence to
World Wide Web Consortium (W3C) and Microsoft Windows standards will
determine the consistency and quality of recording. Due to the technology involved in
recording, the DOS command window cannot be recorded.
❐ SAP: Support for SAP applications is provided in the uPerform SAP plug-in recorder.
❐ Oracle: Support for this application is provided in the uPerform Oracle plug-in
recorder.
❐ PeopleSoft: Support for this application is provided in the uPerform PeopleSoft plugin
recorder.
❐ Citrix: In addition, support for applications in the Citrix Presentation Server 4.5
environment is also available.
Regards
Manish Bansal

Use of XVFB Unix tool

we have got a Java application deployed on a WAS 6.40 SP13 and we want to use the server unix tool xvfb for displaying drawings in the browser of the users.
In a previous step we have got this application running on a IPlanet server and we added these 2 lines:
DISPLAY=:1.0; export DISPLAY
/usr/X11R6/bin/Xvfb :1 -screen 0 1152x900x8 &
in the start file of the application of the IPlanet server.
So my question is: where can i add these lines in a J2EE project developped with SAP Developer Studio to use the tool ?
Thank in advance,
Eric.

Hi
RWD uPerform records your actions in Microsoft Windows,web-based, and enterprise applications, and outputs a professionally formatted document and simulation. You can capture screens, buttons, edit fields, and more in the target application.
The recording process captures information to simultaneously produce both a simulation view and a document view of procedural content.
RWD uPerform captures actions in the following target applications:
❐ Standard Microsoft Windows and web browser applications: Support for these
applications is provided in the uPerform base recorder. Application adherence to
World Wide Web Consortium (W3C) and Microsoft Windows standards will
determine the consistency and quality of recording. Due to the technology involved in
recording, the DOS command window cannot be recorded.
❐ SAP: Support for SAP applications is provided in the uPerform SAP plug-in recorder.
❐ Oracle: Support for this application is provided in the uPerform Oracle plug-in
recorder.
❐ PeopleSoft: Support for this application is provided in the uPerform PeopleSoft plugin
recorder.
❐ Citrix: In addition, support for applications in the Citrix Presentation Server 4.5
environment is also available.
Regards
Manish Bansal

PI_Basis_2005.1 ECC5

Hi
we have installed the ECC5, and PI_Basis patch level is PL_Basis_2004.1.
we have requriment of PL_BASIS 2005.1 can any one guide how to do this on PL_BASIS 2004.1 to PL_BASIS 2005.1
Please let me know the steps for the same
Thanks
DDM

Hi,
Go to
https://websmp101.sap-ag.de/swdc
downloads-> support packages and patches->entry by application group->Plug-Ins-> SAP Plug-In-> PI_BASIS and download the required.
Rgds,
Suman

Upgrade PI_BASIS_2005_1_700 in bw7

hi experts,
I can not find PI_BASIS,2005_1_700 in service.sap.com, only has PI_BASIS,2005_1_640 or
PI_BASIS,2006_1_700...
where can i find it?
thanks.

Hi,
go to marketplace
under downloads u will find entry by application group
Support packages and patches;>Plug ins->SAP Plug ins->PI Basis
Under that u will find PI_BASIS_2005_1_700
Rohit

Which mySAP version support Adobe 8.0 and IE7 to show PDF forms

Hello,
I would like to know what is the mySAP (HCM) version and support package level which supports using PDF forms if the Adobe Acrobat or Adobe Reader is 8.0 and if Internet Explore is version 7.
We are trying to view (static forms so far) HCM related PDF documents by using PORTAL. The current version (SAP + plug-in) does not support Adobe 8.0 --> forms cannot be used.
A promt answer is highly appreciated.
BR,
Pipsa

Neha,
Thanks for the response.
We are running acroread headlessly since it is on a remote server that we access via telnet. Without an XServer session, I can't tell whether acroread is able to read and display the PDF files normally. However, we can view the PDFs with Adobe Reader 8.1.2 on Windows and the acroread -toPostScript command-line that we are using does work properly with other PDFs.
I will email you a copy of a problematic PDF shortly.
Regards,
Steven Dickson

PI_BASIS 2007_1_640 Addon

Hi Gurus,
As iam Upgrading my system i need a to apply an Addon PI_BASIS 2007_1_640 i could'nt find that in the Service Market Place , Can any one suggest how can i search the addon PI_BASIS 2007_1_640,
Waiting for Your Response.
Thanks and Regards,
Naresh.

Hi Naresh,
You can't find PI_BASIS 2007_1_640 as it is not released. you can use PI_BASIS 2006_1_640 if your Kernel release is 640 or you can use PI_BASIS 2006_1_700 if your kernel release is 700.
you can get the addon in: service.sap.com/swdc->Download->Installation and Upgrades ->Entry by application group->Plug-in's->SAP Plug in.
Hope it resolves your issue.
Thanks
Kishore

Cannot update software in Eclipse Kepler

Hi,
I am trying to update the software within the eclipse Kepler for SAP plug-ins. However, I encountered an error message saying that repository is not found. Could any expert help me resolve this issue? The error message is attached for reference.

No need to uninstall, just run the installer to replace the current system folders.
If that doesn't work and you need to erase and install, come back here and we'll give instructions or point you to where you can find them.
Likelihood is though that you only need to run the install disc 2 to restore your iLife applications.
If your profile is correct (10.6.4) you won't have the app store; it wasn't introduced until 10.6.6.
If you want it, the last update for Snow Leopard is 10.6.8 (this includes additional security features) which you can download from http://support.apple.com/kb/DL1399

SAP PLUG IN's

Similar Messages

Maybe you are looking for