SAP PM - Equipment BOM
Hi,
is there a function (perhaps in the customizing) to prevent the user to input a material twice in the same equipment bom? SAP should warn the user by doing this.
regards
I think this can be acheived using an User exit which checks for duplication of materials in BOM while saving the BOM.
The User Exit should get activated or triggered while saving the Equipment BOM and check for duplication of entries, should warn the user and pop to save or exit.
Hope this helps you.
Similar Messages
-
Deletion flags for equipment BOM
Hi,
In equipment BOM header , there are 2 fields for deletion flag :
-one is set manually (the one on the right)
-the other set by the system (the one on the left).
Can someone explain to me how deletion flag indicator (on the left) work?
Thanks,
P.Hi,
To explain this i must say first there is a difference in the Deletion Flag (Right in Header) and Deletion Indicator(Left in Header).
In SAP term The deletion Indicator shows the item which has already been Deleted from the System and Deletion flag shows that the record has been flagged for deletion and will hence be Archieve (when, depends on the Archieving strategy followed in the company).
To explain the affect these will have is the Deletion Indicator will not allow you to use the and will show the error as the object has been deleted and is not in the system.
Deletion flag for BOMs
Indicator: this BOM will be archived during the next archiving run and, if necessary, deleted from the data base.
Where as the Deletion Flag will show that the object is ready to be archieved and is set to be deleted.
Deletion Indicator
Indicator showing that the BOM header or the BOM item has been deleted with reference to the change number.
Now there is another difference in the way we can amke the objects active from deletion flag anf the deletion indicator.
For Deletion flag you have to go to change mode and just remove or untick the deletion flag.
For Deletion indicator you have to go to Archieve table and pull the object back in to SAP system and it will then show only the deletion flag, which can be removed by the way explained above.
I hope this was helpful, if yes then please award points.
Regards
Anoop -
Hi,
Is there a BAPI or a function module available for Equipment BOM creation for transaction IB01.
ThanksHi Nidhi,
Chk the below links you might get an idea.
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
Reward points for the helpful answer.
Regards,
Harini -
Hi All,
Please let me know if there is any BAPI/ FM available for creating Equipment BOM (IB01 trancastion).
Thanks in advance
regards,
BoomaCheck sample code in:
http://scn.sap.com/thread/562325
Regards,
Sergio. -
Is there any standard BAPI to create Equipment BOM? Tcode - IB01
Hello,
I use that bapi for create BOM but not equipement BOM.
I find on forum, response wiche can help you :
Equipment BOM Upload BAPI
RFC / BAPI for Equipment BOM - IB01
http://wiki.sdn.sap.com/wiki/display/ABAP/ECCstandardBatchInputprograms
Thierry -
Equipment BOM ( t code - IB01/IB02)
Hi,
I want to check duplicate entry of MAT code in a Equipment BOM ( t code - IB01/IB02) .
is it possible in 4.6B version of SAP R/3.
Plz suggest.Hi Sunil,
It is not possible in ECC 5.0 also for Equipment BOM.
It is possible only in material BOM creation in PP module.
Regards,
Santhosh -
Dismantling of material from equipment BOM
Dear Experts
I am a beginner in SAP PM. I have one PM scenario. How to implement in SAP.
I want to dismantle one temperature gauge from one equipment for repaired, first I have to dismantle the gauge from equipment and after repairing I have to reinstall the gauge on equipment. How to proceed for that?
My temperature gauge is maintained in BOM for that equipment. How can I dismantle material from equipment BOM and reinstall that?
ThanksHi Iqbal
In IQ01 for the 'material' Temp gauge I created one serial no and equipment. I installed that equipment(temp gauge) on pump as sub equipment. Then before repairing, in IE02 itself I selected dismantle and dismantled. Is it the way you were mentioning?
Alternatively when I use the t-code IE4N it gives the following error massage: -
"Missing Customizing settings for software component ECC-DIMP
Message no. IEN126"
Can you please tell me the path details for IE4N. And is there any customising settings reqd for this T-code.
Thanks -
Difference between Sub-Equipment & Equipment BOM
Can Anybody Please tel me the difference between Sub-Equipment & Equipment BOM ?
Since both are Sub-part of the Equipment , on what basis these two items are differentiated ?Sub-equipment:
Suppose there is a overhead cranes in a coal yard, and your client mapped coal yard as functional location and cranes as eq-1 in SAP.
but a overhaed crane has many equipment like -
1. LT motor (long travel)
2. CT motor (cross travel )
3. gear boxes
so u can categorise all above equipment as sub-equipment in SAP and each sub-equipment having one superior equipment as eq-1 (crane no. 1)
Eq BOM:
Equipment BOMs are used to describe the structure of equipment and to assign spare parts to equipment for maintenance purposes.
simply, what are the components and quantity being used to make this equipment.
electric motor having component like
1. bearing
2. nut-bolt
3. casing
4. armature
5. winding
6. carbon brush
like may be more than 50 components. -
Error while creating equipment BOM (IB01)
hi guys,
while creating equipment BOM (IB01) i am getting this error, while adding components.
'Material type NLAG cannot be used with item category (plant 1000)'.
regards
chintaHI Chinta,
I understood ur problem IB01-give the equipment number which is generated by the system and give plant name in which you have created the equipment and bom usage as 4 (plant maintenance) and press enter.
Then you will get the components list give the description,quantity and item category as:
as you gave it as L it is throwing an error give it as N(Non stock item), then you wont get the error.while selecting the item cat. you will get differnet components and you select the appropriate one based on you equipment.Hope you issue is resolved.
Regards,
Bharat -
Tables or Logical database to create standard report for Equipment BOM?
Dear All
My client has requirement for the report with fields like to see the status of Equipment BOM(input of Equipment number in selection screen) or for Particular set of Materials(input of component number in selection screen) available stock quantity,storage location of stock,description of component,price of component,Pending PR of component(if any),Pending PO of component(if any) etc
I want to develop the report with standard infoset query instead of going for abap development.is there any logical database to map the report or what tables can i use for table joins??
Required sample report with fields as below
BOM Component
Stock available/Not available indicator
Description of Components
BOMQty/ UOM
Price
Part Number
Plnt
Sloc
Stock Qty
Bin
Pending PR
Pending PO
1000001121
YES
BEARING
NO
2000
ERS22
1000
MECH
4
A1
300012431
Regards
M.ManojkumarManoj,
The following is the tested solution.
Table join
Output
This figure shows the case of a Equipment BOM where 3 components are there. Installed Quantity are 4, 1, 1 respectively. Last two columns are showing the Storage Locations and the Stocks available.
Fields taken to output are
From STPO : IDNRK MENGE MEINS
From MARD LGORT LABST
As said before, more than this you can not do in SQVI. With this basic join in SQ02, using codes in Extras you can do much more.
Jogeswara Rao K -
Item category in equipment BOM ?
hi all,
how could i chose the item category of a component while creating equipment BOM.
how do i know weather it is of 'L' of 'N' or any thing else.
regards,
chandraHi
Item category L- stands for stock items i.e. for these items you normally maintains stocks.
N- is Non stock item i.e. when you use it in BOM its for idication only. However when one creates order & assigns components of item category N, it trigers a PR for immediate procurement. So check with your business requirement.
Regards
Shakti -
Function Module for creating Functional Location BOM and Equipment BOM
Hi All,
Is there any function module for creating and changing Functional Location BOM and Equipment BOM ???Hi,
Tables for Eq., BOM: EQST, STKO, STPO.
Tables fro Fun., Loc., BOM: TPST, STKO, STPO.
You can use FMs: CS_BOM_EXPL_TPL_V1, CS_BOM_EXPL_EQU_V2 & CS_BOM_EXPL_MAT_V2 for extracting the appropriate BOM related data.
And for the Alternatives please check the customizing or check with your respective Module experts for the appropriate configuration.
Hope this helps.
Best Regards, Murugesh AS -
Hello,
1. What is the Tcode to see Equipment BOM list ?
2. How to see a particular ERSA material is used in how many Equipment BOM
Thanks
PrasadAs described above, there isn't a BOM list as such.
However, you could look at the Equipment BOM Logical Database (CEC) via TCode SE36
This Logical Database can also be used in TCode SQVI or SQ01
PeteA -
Maximum Line items for Equipment BOM
Dear Experts,
Is there a limit to the number of line items of components we can have in equipment BOM. I am not able to add anything above 999. It doesnt show any error, but doesnot save any value after 999. Please let me if there is a work around.
Thanks,
BobyThe BOM item node number STPO-STLKN is an 8 digit field therefore I would imagine that you could have a maximum of 99999999 items..
But you could use multi-level BOMs which would allow you to organise your components better.
PeteA -
Hi,all,
I m maintaining equipment BOM for spare parts planning ,where all item category has been mentioned as "L",now from maintenance order I want to generate Purchase Requisition by changing the item category as "N" after selecting the specfic item from that equipment BOM .But item category field of the maintenance order is coming greyed mode ?how can I change the item category from "L" to "N" to trigger PR??
Also is it possible to create Purchase Requisition from t-code ME51N with reference to an equiment for which I have maintained BOM .Is there any field to enter equipment no from where I can retrieve the spare parts list ?Please give ur valuable suggestion how to proceed.
thanks in advance.
rgds
rajibHi,
BOM item should be maintain with item category u2018Nu2019 or while assigning component to order instead of double clicking on item (BOM item) , Just copy the material (ctrl+c) and assign category :u2018Nu2019 and quantity manually.
In case of second issue: You cannot create a PR with reference to Equipment and there is no field in PR to assign Equipment. If you are having cost centers assigned to equipment in 1:1 ratio, you can assign cost center in account assignment of PR item.
Or else you can go for a standing order that is one standing order is to be assigned to each equipment and same can be used for account assignment for procurement.
In case of capitalization of expense you can go for asset as account assignment.
If you are not looking for account assignment and just want to retrieve the PRs connected to Equipment then you can think of tracking no field.
Raju
Maybe you are looking for
-
i had to upgrade from ios7 to ios8 but it needed more storage i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?
-
I can no longer create a PDF with Save As in Excel 2007
I can no longer complete a full page of my graphs with the "Save As" function in Excell 2007 and have tried various methods to correct my problem from pagination to finally completely recreating the graphs as the original file was created in Excel 20
-
How to make a new section visible in the server published version
I use UPK 12 Client. When I click "Link a new section" in an existing Module, I can see it in the outline in the left pane in my UPK 12 Developer. When I then check-in all items, click Publish > select c: drive (a test folder) > Publish entire outlin
-
How to make my program faster?
I have a program which produces two elements array. In normally the program ends in microseconds, however when I organize my program to send the array as a data to DAQ.mx write and the array will be the voltage output from my NI USB-6012 DAQ, my prog
-
Table for maint. Order & Service
Hi All, I have created one maint. order with external service. In which table i could find the service against the order. I have checked ESLL but there is no Order link. regards sunil