SAP PM object dependency diagram

Hi All,
We are working on an SAP PM data migration project.
Could anyone help me with the load dependency diagram for SAP PM objects.
At least a list of SAP PM objects will be of help.
Thanks,
Gopi

Hi,
Check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a2/db080c047911d49fa90000e8323350/frameset.htm
It's a description of PM technical objects and their relations.
Regards,
Eli

Similar Messages

Object dependency doesn't work for class type 001.

Dear All,
I would like to use classification for picking up material.
I set up a class with class type 001 and assign to material.
When I use mm03 to search the material with class, the object dependency in the characterist doesn't work.
Does the object dependency work for the class type 001?
The example is as below.
If the characteristic CH_CAR = '01', then the characteristic CH_COLOR can show Red and Write.
If the characteristic CH_CAR = '02', then the characteristic CH_COLOR can show Black and Blue.
I wrote a depency precondition for this scenior, but it does't work.
If I change the class to type 300 and attached to a configurable material, then when I create a sales order and configure the material, and the dependency did work.
Does the object depency only support the class type 300?

you can have object dependency in characterisitcs attached to material class. In this thread underneath the class is 001
Length & Width is not converted in classivication view
you may not be able to find objects using dependencies used in classification
Object Dependencies in Classification - Classification System (CA-CL) - SAP Library

Object Dependancy for CHARS in Easy DMS

Hi All
I have given object Dependancey for some CHARS in SAP DMS.Its working fine in DMS , but when I check the same thing through Easy DMS, the dependancy is not working.. I can see all the CHARS and all Values are displayed there..
Can someone guide on this??
Regards
Aby

Dear Thomas,
I regret but the object dependency is not working in EasyDMS currently due to a restriction in BAPI_CHARACT_GETDETAIL.
Best regards,
Christoph

Transport list of SAP-XI objects

Dear Team,
I have querry regarding the transport of SAP-XI objects from Dev to Test system
The BASIS team performs the transport and they require the list for the transport of SAP-XI.
My question:
1. In SLD I created a new Business System, Product and Software components. I should provide these objects for SLD.
2. In ESR, data types , message types, SI , MM and OM under new software component.
    Under the SWC I created 2 namespace for sender as well as reciever.
    *As under this SWC, all the objects are newly created so should I provide this SWCV or individual
    objects.*
3.For ID, whatevr the objects are created under my configuration scenario I have to provide the information.
4.Do we need to transport any objects from ABAP stack of Dev XI to Test XI? I dont think it has to be.
Regards
Alice~

Hi Alice,
1. that depends on how your SLDs (dev+Test) are connected, and if (or not) the automatic replication is in place. See with your Basis. An easy way to check is to connect you to SLD of test and check, by yourself, if your objects are here.
For Business System, I hope you define the transport Group and do the assiocation BS_Dev -> BS_test after the transport. By this way, the PI config will be automatically updated after the transport.
2. As you want, as it's the first, but personally I prefer to use option "All objects of a Namespace" (or something like that).
3. The complete scenario with all objects, for instance by using option "all object of a scenario" (or something like that).
See my point N°1.
4. No, except if you created Abap mapping, Ztable in the abap stack.
5. After the transport, do forget to do the cut over like: updating the server / folder in your CC, doing the ALE config in ECC / PI, creating different folders in your file server if your exchange files, etc...
Regards.
Mickael

SAP Business Objects Explorer on top of SAP BW

Dear Experts,
My Requirement:
- Use BO Explorer on top of SAP BW ( no HANA, no BIA ). This is to provide the users a set of related data and they can analyse the way they want.
Question-1:
- What should be the BW data volume that I should keep in mind for BO Explorer to have good performance. My concern is primarily because we don't use BIA or HANA.
Question-2:
- Can BO Explorer directly connect to a BW Infocube/Multiprovider or it has to connect only through Universes
Regards.

Hi,
I will suggest you Go for SAP Business Objects Analysis, edition for Microsoft Office,ity can connect bex query directly & Bw/Infocubes also.
Regarding Performance we can do In BI Itself depends on Business needs,: modelling , extraction, reporting 3 levels in BI .
For more info : Refer Below :
FAQs for SAP BusinessObjects Analysis
Thanks.

SAP Business Objects Universe Desgin Problem

Dear Experts,
I getting Problem to create the below Scenario in SAP Business Objects Universe level
The data base is M-SQL 2008
The data is below liek this
Tabel1: Note: Due to clear under standing i mantained the & for each data spearation
Fields: EntityID    &    Parent ID     and         Effective data
Data: WILGP    &       WILGP          &            01.01.2010
           WIL          &      TSILGP        &             02.01.2011
           SALGP      &    WILGP             &          01.05.2010
           WT           &      MSIALGP         &         01.03.2011
            PALM       &     WALGP           &          04.05.2010
           MSIAGP    &     PALM &              01.01.2011
          WCLGP        &   SALGP &01/01/2012
          ROW           &    WILGP &01.01.2011
Requirement:
In BO The want the Hierarchy level(Time Dependency)
liek 5 nodes:
Node1: Parent ID(Field1 with some condition)
Node2: Entity ID(Filed2)
Node3:If Node2 Entity ID = Parent ID then Bring the all Entity ID 's
Node4:IF Node 3 Entity ID = Parent ID then Bring the all Entity ID's
Node5:IF node 4 Entity ID = Parent ID then Bring the all Entity ID's
same Structure(Class) need to create in the BO Universe , could you please help any how to create the above Hierarchy Structure in BO universe level
Please help me on this issue

Hello Venkata Ramana Pandi,
As Manoj Dhyani mention in the above thread, try changing it into CWM format and give it a try.
Follow the below steps:
Export the DS datastore in CWM format, select the datastore and enter a XML file name
Open the Universe Builder (this option will be in BOE Program menu), you have a option in Universe Builder to import XML exported from Data Services/Data Integrator, check if that creates your Universe successfully
to use Metadata Exchange do the following
Open Data Services Desginer
Click on tools Menu -> Metadata Exchange
In the Metadata Exchange window
Select Export Data Services metadata to a file
Select DI CWM as metadata format
enter location for xml file (C:\temp)
Select the datastore you want to create Universe for
Click OK
Check for file named repo_export.xml in the C:\temp folder or the folder that you specified
Open Universe Builder and Select
Data Integrator bridge
and use the xml file as input to create universe

Why Sub Folder for Hyper linked reports in SAP Business Objects

Dear Experts,
We are using SAP Business Objects 3.1, in my organization we already have reports builded for different requirements. Every report has hyperlink with another report. Developer had created separate folder for all these hyperlinked reports.Now, my question is, why he might have created separate folder for these hyperlink reports.
Ex:
Folder1
subfolder
{ report4
report5
report6}
report1
report2
report3
report4
report5
report6
report7
report8
Can you please help me to understand why he had created sub folder for the existing reports.
Thanks,
Kote

Kota,
It all depends on how your security model is set-up and the number of users/groups within your CMS and if any 3rd party security is also used like AD Auth.
The sort answer is, if security is defined properly at a Folder level and NOT at object level then it should NOT have any effect.
Regards,
Ajay

Creation of Object Dependency (OD)

Hi Gurus,
Currently we have customized a program to create/update object dependencies. However we have a problem that sometimes the object dependency is deleted and not updated back. As we cannot simulate this all the time (especially during debugging) and we don't know why is it having this issue, we are looking at options to enhance the following codes.
We are using 2 function modules CAMA_CLASS_CHAR_DEL_DEP (to delete) and CAMA_CLASS_CHAR_MAINTAIN_DEP (to create)
        CALL FUNCTION 'CAMA_CLASS_CHAR_DEL_DEP'
          EXPORTING
            CLASS                  = <FS_DEP_CHR_A>-CLASS
            CLASS_TYPE             = '300'
            CHARACTERISTIC         = <FS_DEP_CHR_A>-CHARACT
            DELETE_LOCAL_DEP       = 'X'
          IMPORTING
            RETURN                 = WA_RETURN2
          TABLES
            DEP_ASSIGN_DEL         = IT_DEP_ASSIGN_DEL.
        READ TABLE IT_RETURN INTO WA_RETURN WITH
                  KEY TYPE = 'E'.
        IF SY-SUBRC NE 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              WAIT = 'X'.
        CALL FUNCTION 'CAMA_CLASS_CHAR_MAINTAIN_DEP'
          EXPORTING
            CLASS                 = <FS_DEP_CHR_A>-CLASS
            CLASS_TYPE            = '300'
            CHARACT               = <FS_DEP_CHR_A>-CHARACT
            DEPENDENCY_DATA       = WA_SEL_DEPDAT
            KEY_DATE              = SY-DATUM
          TABLES
            DESCRIPTION           = IT_SEL_DEPDESCR
            SOURCE                = IT_SEL_SOURCE
            DOCUMENTATION         = IT_SEL_DOC
          EXCEPTIONS
            ERROR                 = 1
            WARNING               = 2
            OTHERS                = 3.
        IF SY-SUBRC EQ 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              WAIT = 'X'.
Points will be rewarded for useful answers. Many thanks in advance.
Rgds

Mainly due locking issues. Added some logic to wait.

Object dependency for batch characteristic

I have 1 class with multiple characteristics and 1 of the characteristics should be entered (mandatory) in case of a certain split valuation type (which is covered in the batch info). This should be done via object dependencies within the charateristic. Anyone knows how to do this?

Dear Sairam
As explaind to you in the earlier thread for product or proportion unit. you need not maintain object dependency for the characterestics. You have to maintain product unit which will appera as alternatvie UOM. While making GR the Alternate or product UOM will be seen as per the plan value(conversion factor) maintained in material master. You can change both Basic UOM and Alter UOM as per the actual caonversion recieved. This conversion factors will be saved in the batch classification.
Regards
MSR

How to get the Purchase order Qty in the object dependency

Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
Srini

Hi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ).

I have error while testing the system created from a sap business objects template in SAP portal

I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2.     Next I setting integration SAP PORTAL with SAP BW system
3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6.     Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1.       Run STRUSTSS02 transaction .
2.       Chose certificate ->import.
3.       Select downloaded certificate file
4.       Select Add to certificate list button and Add to ACL button
5.       Inter System ID and Client(000)
6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7.       Result – downloaded iview.
8.       In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10.   When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

Did you find a solution?

Error while connecting microsoft Excel to sap business objects

Hi,
I am trying to connect sap business objects to Microsoft Excel using Power Query add in but i am getting Proxy time out connection error when adding
Credentials, As per the SAP documents i am using SAP Restful Web service URL when connecting to Business objects
Details are as follows:
Opearting System-:Windows 7
SAP BO Platform-:BO 4.0 SP 6 (OS-Windows server 2008 R2)
Excel Version-:Microsoft Excel 2013
ADD IN-:Power Query
Please check attach Error Screen-Shot for Detail information
Regards,
Rupesh

Hi,
please be aware that you need SAP BI 4.1 SP2 at least for using Power Query
So maybe this error results in a non suported Environment.
Regards
-Seb.

BI Accelerator used in combination with SAP Business Objects Explorer

Hi ,
If you use SAP Netweaver BWA and SAP Business Objects Explorer Blade, do you only get the full benefit with using SAP BO Explorer, or will the same queries ran in BEx 7 Anaylser also benefit from the in memory OLAP processing?
I'm guessing that the SAP BOE Blade will only benefit SAP BOE.
It would be great if the current BWA had the ability to in-memory the OLAP part of the processing, as then it might be worth the hassle of getting it installed.
Thanks,
Jamie

Hi
May be the note : 1384526, could give you an insight.
Regards, Hyma
Edited by: Hymavathi Yanamadala on Feb 25, 2010 5:13 AM

PDS Creation with Object Dependency

Hello Gurus,
I´ve written a function to run BAPI_PDSSRVAPS_SAVEMULTI in order to create PDS with object dependency (Super BOM). The PDS created by my function looks good in CURTO_SIMU, but it is not respecting the characteristic dependency during PPDS Heuristic. If I take a PDS generated in ECC with the exact same attributes, the heuristics explodes the components correctly. When I run the getlist bapi, it shows both ECC created and function created with all tables (pds_header, pds_component,) filled with the same content. Though, one PDS works and the other doesnt. I am clueless.
thank you a lot.
Cheers
Rafael

Mainly due locking issues. Added some logic to wait.

Routings: mass change of object dependency

Hi Friends,
Do you know if there is way to apply a mass change on object dependency in Routings?
My scenario is: add one new obj dependency at one operation on several (hundreds) routings.
Thanks a lot for any help or suggestion.
Bye,
Flavio Ciotola

Dear,
BDC is good option you can record the BDC for CA02 through SHDB.
Or else in mass you can do this wth CEWB - Engineering Workbench first define the Working Area in OP77 lets say Working Area SAP_OPERATION select focus on operation also select the required field like Object dependency.
and then go ahead with CEWB.
Hope it will help you.
Regards,
R.Brahmankar

SAP PM object dependency diagram

Similar Messages

Maybe you are looking for