Sap pm preventive maintenance process step

Hi,
Please any body to help me the total cycle or step by step process of preventive maintenance (either it is Strategy based or single cycle or multiple cycle). with screen shot (if have some word doc pls sent me @ [email protected]) quick response is highly appreciation.
waiting for prompt reply
Best
Rajeev

Avoid phrases such as "Quick Responses", "Urgent", etc., Also, avoid giving your mail id in SCN forums. These are against SCN rules.
And, search for Preventive Maintenance in google. There are many threads. Read SAP help on Preventive Maintenance. If you face any specific issue, post that in forum.

Similar Messages

SAP process steps for tool room

What will be the SAP process steps for tool room.
Moulds are manufactured and maintenance of moulds are being done in the tool room

Hi,
Assuming the moulds are available, you may follow the steps below:
> Create mould as Equipment with PRT screen data
> Create measuring point for this equipment.
> Create counter based maintenance plans for preventive maintenance.
> Use applicable user exit to update the measuring point, in association with PP product confirmation, where this mould is used in respective work center.
> This will give the preventive maintenance schedule in accordance with usage.
> For unplanned repairs, use notification/Maintenance order route to calculate the costs and to maintain history.
> When life expires, deactivate and set 'deletion' flag' to the respective mould equipment master, so that it can not be used in production.
> Detailed scenario should be mapped, based on the actual customer requirement.
James Prabaharan

Preventive maintenance and calibration process flow

Hi Experts,
I am totally new to Plant Maintenance. My client has the below requirements.
1) Machine preventive maintenance schedule.(monthly/yearly)
2) Measuring instruments Calibration.
3) Maintenece schedules of PRT/Test equipment.
How to manage all the above requirements. Would be of great help if expalined the entire process flow in detail.

You can refer following SAP help link to get intro idea about same topic:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm]
SDN discussion:
[Claibration in sap;
[Calibration Order Process]

Self Check and Your self check printing process steps and program in SAP

Hi SAP-FICO's
My client required in SAP-ECC-6.0
1.Self Check printing for cash withdrawel
2. your self check for one Vendor or group of vendors for getting DD from the Bank
3.How to issue the same check for more than one vendor and get debited through F-53 bank payment
Can any one give idea and process steps to resolve the above three issues .
Thanks in advance.
Thanks &regards
maalik

Hi
Can any one can provide the process steps.

Finding process steps from BPR - some process steps missing SAP tcodes

In Solution Manager 4.0, we are currently focusing on the documentation part and our teams have defined their respective hierarchies, scenarios, processes, and process steps.
When looking at our process steps, we are trying to download it from the BPR but it seems such an uphill battle to find the right process step in there and if you think you have it there are no transactions behind it.
My questions are:
1. Is there any way I can find a process in the BPR by transaction code so it will show processes by transaction code?
2. Any tips of finding the right process in the BPR?
3. If we are to manually add the process steps and the transactions by process step, what do we lose? In the structure tab of the business process, the source and original name will not be populated but looking at the transaction tab of the process step, after manually added, it looks fine. Will this at all influence getting the customization (configuration) items in SolMan?

Dear all,
The best way to find the process step in sol Man BPR is:
Let us consider one scenario:
You want to find business process step "Run MRP" from BPR. If you want to execute this process step, the relevant t.code is MD01. ( Let us assume You know this t.code already by memory).
Now enter this t.code in Sol Man, at business process step level. If you enter this t.code, automatically, the system will give you the "Description of the t.code (as a text)". This text is automatically fetched from BPR content. Copy this text & search in BPR.
Now , the system will properly highlight the t.code (MD01) from BPR. Now select the process from BPR.
Regards
Senthil

Document Management System for sap mm point of view steps

Hi All.
Document management system for sap mm point of view steps required.
Thanks in advance for all sap mm forum members.
Regards.
Parameshwar

Hi,
Customizing settings can be collected by processes into Business Configuration Sets (BC Sets). BC Sets make Customizing more transparent by documenting and analyzing the Customizing settings. They can also be used for a group rollout, where the customizing settings are bundled by the group headquarters and passed on in a structured way to its subsidiaries.
BC Sets are provided by SAP for selected industry sectors, and customers can also create their own.
When a BC Set is created, values and combinations of values are copied from the original Customizing tables into the BC Set and can be copied into in the tables, views and view clusters in the customer system. The BC Sets are always transported into the customer system in which Customizing is performed.
Advantages of using BC Sets:
1.     Efficient group rollout.
2.     Industry sector systems are easier to create and maintain.
3.     Customizing can be performed at a business level.
4.     Change Management is quicker and safer.
5.     Upgrade is simpler.
To create BC sets follow the below step:
Choose Tools ® Customizing ® Business Configuration Sets® Maintenance in the SAP
menu, or enter the transaction code SCPR3 in the command field.
Choose Bus.Conf.Set ® Create.

Maintenance Optimizer Step 2 - Select Files cannot view

Hi,
We're using Solman 7.0 EHP to download EHP4 for ERP 6.0. We have maintained in SMSY, system type = ERP 6.0.
From the Maintenance Optimizer step 2- Select files, we cant see both the option of "maintenance" or "enhancement package installation" as shown in the SAP guide. The only option is "Find Download Files" button. Anyone here experience this issue before ?

Hi,
First of all, please make sure that:
- You are a registered ramp up customer.
- The S-user defined in AISUSER in solution manager has the
authorization to download ramp-up installation files.
Also make sure that you have installed all the notes listed in
1122966 for your Solution Manager release.
The option of installing Enhancement Packages in an ERP 6.0
system is only offered in the Solution Manager Maintenance
Optimizer if the systems assigned to the process are assigned to
the product version ERP 6.0 or ERP 2005 in the Solution Manager
system administration (transaction SMSY).   The product version
ECC 6.0 must not be used for the installation of Enhancement
Packages. The attached Note 1022072 describes step by step how to
change a product version assigned to a system.
The following notes should also be usefull:
   1134872 : Maintenance Optimizer: FAQ for Stack Delta Files in EPS
   1156571 : Maintenance Optimizer: Download Basket and SLM Download
   1168160 : MOPZ: Unicode selected automatically
   1170592 : MOPZ: S-User Enhancement
   1233954 : MOpz: No XML would be generated in EPS inbox
   1277035 : Solution Manager: EHP4 product data missing
Best regards,
Felipe Pitta

How Preventive Maintenance Order Gets Generated Automatically

Dear Sir,
We have defined an equipment requiring Preventive Maintenance every month . We want that Preventive Maintenance Orders for this Equipment should get generated automatically for next comming 3 months .
Kindly guide us as what steps need to be followed so that Orders are generated automatically .
With Thanks & Rgds
Sonia

Hi for this please refer below link as u want call object in monthly basis kindly use single cycle plan for this.
[Please see|http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/abbcf6413911d1893d0000e8323c4f/frameset.htm]
Revert for any queries.
Rip

About Plant maintenance Process.

Hello Expert,
Implementaion is done but Actually I am going start pm process in our company.so can any one give me the ideas about process.
Regards,
Ram Rathode

Dear,
As you mentioned, Implementation is completed.
During implementation it self a clear road map, achievements and blue print will be completed [I hope so]. Based on these only clearly process steps are assumed. If its implemented prior to your enrollment in current job, please go through business steps right now following and look the ways to implement them with PM.
View this article: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40e64197-f119-2c10-6590-802f1fb66419
PM - Plant Maintenance Process Flow
http://wiki.sdn.sap.com/wiki/display/ESpackages/PlantMaintenanceforprocessindustry
Regards,
Syed Hussain.

Guided Procedures Runtime showing internal process steps in UWL

Hi
We have created a Guided Procedures Workflow which is working fine most of the time. However, sometimes, Guided Procedures runtime behaviour is rather strangely, it 's showing internal process steps as clickable workitems in the UWL. Clicking on the workitem causes a Null Pointer Exception.
Example:
Let's say, the workflows is as follows:
- Execute Callable Object "start"
- Decision "myDecision"
- If Decsion returns true
- Then execute Callable Object "A"
- Ese execute Callable Object "B"
Normally "myDecision" wouldn't appear in the UWL. But sometimes, it is showing up there. When we click on it, there is the following exception. After a while, everything is normal again (no internal workitems, no exceptions). Does anyone know what is happing here and what can be done to prevent it?
Kind regards
Bettina Hepp
application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error. The error is: java.lang.NullPointerException
at com.sap.workflow.wdgp.task.detail.TaskDetailBodyView.seedNotesContainer(TaskDetailBodyView.java:497)
at com.sap.workflow.wdgp.task.detail.TaskDetailBodyView.wdDoModifyView(TaskDetailBodyView.java:275)
at com.sap.workflow.wdgp.task.detail.wdp.InternalTaskDetailBodyView.wdDoModifyView(InternalTaskDetailBodyView.java:582)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hi
You mean the entry in the UWL list? No, we don't modify this. It is exactly the title we have assigned to in the Guided Procedures Design time environment.
How else can a title be changed? And what kind of problems can occur?
Regards
Bettina

Performance Based Preventive maintenance

Hi Guru,
I have equipment motor. But I need to do the preventive maintenance based on motor running hour (ie: every 1000hr).
How to map the scenario in SAP
Thanks in Advance.
Regards,
S.Babusingh

Hi
You need to create the measuring point for the equiment motor.(IK01)
and in the maintenance plan (IP01)you chose counter based mainteannce plan and set the couter reading 1000 hrs.
also you can define the other paramenters in the plan.,
once the measuring documents reading(IK11) updated by you is reached equal to or greter than the set value orders gets triggerd.
this is standard SAP process
regards
Krishna

How can you tell if a process step is already being processed?

Further to my last note regarding assigned a process step to multiple users, how can you determine if the step is currently being processed by another user? When opening a task which has already been opened by another user, the message "The following action has been opened by another 1 user(s)...."
I would like to prevent the second user from making any changes to the object if it's already been opened by another user, hence this request.
Thx!

Top Right hand corner of the Safari window you will see a padlock. This shows it's secure.
Otherwise, you are pretty much working on trust. If you want to purchase something online and the site takes you through a paypal based checkout, it's fairly standard practice.

Triggering of Preventive Maintenance based on Measuring Point

Hi,
I have set measuring point & defined upper range limit and lower range limit. Now I want to trigger preventive maintenance, based on reading enter against measuring point specifically if measuring point reading is above or below defined upper range limit or lower range limit.
Letu2019s say example, If 10 and 5 is upper range limit and lower range limit, now in this case creation of notification / main order if user has enter measuring point value more than 10 or less than 5.
Regards,
Dipen Shroff

Hi,
You can do it via Condition Based Maintenance ..
IMRC0001- U can use this User exit
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/fa4c988f6611d29e8a0000e8323350/frameset.htm
regards
pushpa

User exit IPRM0002 for preventive maintenance

user exit IPRM0002 for preventive maintenance
has anyone used this user exit? or BADI: BAdI: IPRM_MCP_SCHE_CHANGE ?
I seem to have some difficulty in knowing how to use these....
I need to basically be able to influence a calling date for next PMorder to be opened but documentation is not explanatory and, even if I do know what these exit/badi are used for, i do not understand how to use the parameters provided.
can anyone help?

Hi,
I dont think you would be able to test the exit if you dont implement them for the user exits simply passing the parameters wont help,actually there is a process of implementing a USER-EXIT i suppose u would already be familiar to it, I order to activate the exit you have to create a project in CMOD transaction and assign the enhancement to that and then also create the include that is avaliable inside the FM and there you would be able to put your code.
For the BAPIs ,yes the control should go inside the BADI once you put a breakd point inside the right method but there to you need to implement the BADI and then you can put your code in the method for the effects to take place and you can test.
The detail process of implementation are already avaliable on SCN, It seems that you dont have developer authorizations so i would suggest to take help from some one who has, Best of Luck:).
Regards,
Himanshu

Doubt in Scheduling of performance based preventive maintenance

Dear Experts ,
This is with respect to scheduling of performance based preventive maintenance.
I will put my doubt in example so that it will be easy for you to understand.
I want to perform a preventive maintenance for every 100 litres of fuel consumption.
annual estimate is 7200 litres , that means 5 litres a day.
so as per plan , for every day 5 days , maintenance needs to be performed.
same will be appear after scheduling in ip10 also.
While updating in the measuring document , I know that , if 100 litres is updated before due date , then order will be generated in the current date itself.
I just want to know how system responds , if 100 litres consumption takes more than 5 days , will the system generates order as per schedule date or will it wait to complete for 100 litres consumption ??
Regards
Keerthan Kumar

Greetings Keerthan,
That depends on:
1) The frequency that you input Measurement Documents in
2) Your Call Horizon on the Maintenance Plans
3) Your Scheduling Period in your IP30 Deadline Monitoring variant
Generally, SAP will adjust the schedule based on the Measurement Documents entered for the counter (1) to account for readings (usage) which are higher or lower than estimated.However, it will NOT reschedule any Orders already called. So to make sure the dates are usually adjusted to your usage, you want frequently input MDs, a high Call Horizon and a short Scheduling Period.
SAP will determine a scheduled due date for the Order based on the Annual Estimate and the readings. So, if the due date is in 5 days and you are on a call horizon of 100% and a Scheduling period of 3 days, for example:
a) if you do not input Measurement Documents from Day 0 onwards, the Order will be generated due for Day 5 when you run the IP30 on Day 2
b) if you input a Measuring Document on Day 1 indicating that less than estimated or no fuel was used, the due date and call date may be pushed into the future and the Order will be generated after Day 2.
c) if you input the MD after Day 2, this Order will already have been called and will not be rescheduled, but subsequent calls might.

Sap pm preventive maintenance process step

Similar Messages

Maybe you are looking for