SAP PO EDI Separator Channel Error

Hi All,
We have an Inbound EDI(INVOIC D01B format) Interface. There are 2 flows involved for the same.
1 st flow: File -> EDI Separator
2nd flow: EDI Separator -> IDOC
Sometimes its successful in the 1st flow and In the 2nd flow it picks different channel (Since we have 5 more EDI separator sender channels) and its throwing a mapping error since it picks different format.
In receiver EDI separator channel we are getting the error.EDI Separator channels behaves differently each time.
When same file is tested in B2B cockpit its Successful. So I am guessing no issues with the file used for testing.
We have tried below options:
We did a Full Cache refresh and tested again still the same error exists.
Stopped all other sender EDI Separator channel and tested still same error exists.
Tried to keep only 1 sender EDI Separator channel and tested still same error exists.
Tried a dummy change to all channels and tested again still same error exists.
Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: senderChannel 'ba6bc28e205c33629ec6d1cb5e2fb164': Catching exception calling messaging system
MP: exception caught with cause javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: senderChannel 'ba6bc28e205c33629ec6d1cb5e2fb164': Catching exception calling messaging system
Exception caught by adapter framework: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: senderChannel 'ba6bc28e205c33629ec6d1cb5e2fb164': Catching exception calling messaging system
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: senderChannel 'ba6bc28e205c33629ec6d1cb5e2fb164': Catching exception calling messaging system
Please let me know your Suggestions if any!
Appreciate your help!
Thanks,
Sharanya

Hi Dimitri,
I have tried giving all the parameters like Message type,Version....etc..
But still it doesn't work.
Thanks,
Sharanya

Similar Messages

B2B Add on (Edi separator) IDOC AAE Receiver Error

Hi
We are getting an error, Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.engine.interfaces.messaging.api.exception.ConfigException: No sender agreement configured that matches the message's header fields (sender party: "xxxx", sender service: "", interface: "xxxx", receiver party: "", receiver service: "xxxx") when using IDOC_AAE Receiver adapter with ICO, scenarion works fine with standard IDOC adapter on integration engine
We have 7.31 dual stack with B2B addon sp03
We are using control records from mapping (reciver idoc adapter >advanced>control record in IDOC XML> all options selected)

Hi,
Yes, I filled the information on EDI separator channel, however this works fine with standard idco reciever adapter on integration engine, the issue is when I use ICO with Idoc_aae reciever adapter
you mean to say I have to use (.*) filling all sender edispeartor channel information mandatorily
what if I have to use the information to filter the message type from a multiple message type EDI file
Again this works absolutely fine with idco adapter on IE

Query on EDI Separator adapter

Hi,
We are using B2B Add-On and EDI Separator adapter.
There is a EDIFACT interface handling a particular transaction and version - Orders D96A. For a bunch of the partners (sender/receiver id combinations) we need to invoke a particular mapping and rest of the partners to use a different mapping.
How can this be accomplished?
Regards
Rizwana

Hi Piyush,
I have created one EDI separator channel as Sender Id as *,and one more EDI separator channel with specific Partner sender ID eg "123456".
When an EDI file for specific partner 123456 arrives it invokes both the default and specific channels and flow.
Is this a bug or expected behavior of the EDI Separator sender channel.
Regards
Rizwana.

NFS Commnication channel errors for deleting and placing

Hi All,
I was trying File to file scenario.
I am picking the file from App server(AL11) using NFS Adapter and the processing Mode is Delete
In comm channel monitor it showing an error as
Sender channel error:
Error: File '/staging/INTERFACE/SAP/ca/kar370.txt' - deleting after processing failed
Same way while placing the file
Receiver channel error:
Error: Message processing failed: FileNotFoundException: /staging/INTERFACE/SAP/ca/test120110906-122051-980.txt (Permission denied)
Whether i dont have the permission to delete and place the file from and to the App server(AL11)?
What is the procedure in order to make it possible.
Thanks
Sai

Hi All,
Thanks to every one.
The problem is solved ,
Basis Guy has given the permissions, and i am able to place and delete the files .
Thanks
Sai

Receiver JDBC Channel Error : Incorrect syntax near 'OR'

hi,
we are facing the below error at the receiver communication channel:
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 'OR'.
When we again reprocess the message,it shows the exact error at the channel.
Any ideas why the first error shows up?

Hi, Anu
The most probable it's that your target XML it's not correct because it haven't a correct format.
Please, check your target XML and see
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/465581929734d9e10000000a42189d/frameset.htm
Regards,
Carme

Communication Channel error (Device busy)

HI all,
i have a problem with sender communication channel (CC) (type file) on PI 7.1
The CC has follow error:
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.FileNotFoundException: /IFR_PI/prd/out/TYPEB/SEDE_PV/PV_ART/VARGPV_I003 (Device busy).
Anyone can help me to understand this error?
Thanks in advance
PM

Hi,
      The file size is a drawback of file adapter.
      Check the note Note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter
     See point 14. Memory Requirements
Indeed the error is IO Error and it is because the Adapter engine was not able to send the message to Integration server. But it happens due to memory/heap size issues.
Look at these thread, they are having the same problem. Please try the remedy measures suggested by them
Mail to Proxy scenario with attachment. AF channel error.
Error with huge file
problem with big file in file-to-proxy scenario
regards,
ganesh.

JDBC to JDBC Scenario - Communications Channel Error

I am following the published JDBC to JDBC Scenario:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
The data source is in
C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
Why am I getting the error?
Thanks,
Ed Culnane

Hi
Connection Parameters are of given below check
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Well ms access file should be in the XI Server path or it should be able to accessed by the XI
Try this above option of keeping u r file in the XI Server path instead of the local
rgd
srini

Comparison between split Adapter in Seeburger and EDI Separator

Hello All,
Currently we are designing EDI interfaces using B2B Add-On.
I am trying to compare the split Adapter of Seeburger and EDI Separator of B2B Add-on.
In Seeburger Splitter configuration:
The additional split configuration helps to map the Sender ID, (EDIType,Transaction,Version) combination to split channel and sender agreement.
I believe a List of Sender Id, Mappings (Standard, Transaction, Version) combinations can be added to the same Split channel and Sender Agreements.
In B2B Add-On:
The sender ids , EDI details are directly mentioned in the channel and it is bound to sender agreement.
Does it reduce the flexibility in EDI Scenarios.Is that a correct point of view?
Your inputs highly appreciated.
Thanks.
Regards,
Sudharshan N A

Dear Sudharshan,
yes, I would say that this is a correct point/observation. When the Seeburger Adapters were introduced many years ago, one focus was put on the flexibility by keeping all functionality related to the "format conversion" (Classifier/Bic/Splitter) completely separated from the "data transmission" functionality directly in the channel.
This way, the format conversion modules could be included in any adapter that was running on the AdapterEngine and not just to the See-Adapters.
In a typical setup on client side, almost all inbound channels were using the "AUTO" functionality to detect all required parameters to select the right Split-Channel...so all channels had the same module-chains included (no matter if it was an AS2-Channel or a simple FILE/FTP-channel.
This also allowed for easy reprocessing of any received file (via AS2, X400 , OFTP or else....) by just putting the file again to a file-channel with the same module-chain parameters.
Kind Regards
Stefan
Btw... I am not very familiar with the B2B AddOn, but if you have additional questions regarding the Seeburger-EDI-Adapters, feel free to ask...

Communication Channel Errors to be monitored in CCMS

Hi,
We have set up CCMS Monitoring templates for PI monitoring. We have a business requirment to send communication channel errors to the IT team via CCMS
We have configured ALERTCATEGORIES and defined alert rules. The communication channel errors result in alerts. These alert categories are visible under the CCMS PI monitoring template.
What is not getting transmitted is the alert long and short text in CCMS.
is there any way to achieve this?
Please point to how to guide or blogs for the same.
Thanks
Abhishek

Hi Amit...
Check the error i got when communication channel is red...
till now it was working fine.......i tested with a file which has unproper mapping ..and sent it....it gave an error...with mapping exception..(Please do remember..before i sent unproper XML....commmunication channel was green)
it often happen when i use unproper XML......
here is the messages it says
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)'
Edited by: Harsha reddy on Jun 20, 2008 10:01 PM

IDoc adapter inbound channel: Error Fehler beim Le

Hello,
I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
Can Someone help me?
Caller Function module Target system Date Time Status text
SRGEN13 IDOC_INBOUND_ASYNCHRONOUS RHXCLNT013 07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
Thank you
PM

I want to know if the Connections have to have SNC?
I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
Inbound and outbound connections should be secured by Secure Network Communication (SNC).
Is that correct? maybe that's why it says the that error
PM

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

IDoc adapter inbound channel: Error Error while read

Dear All
I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
IDoc adapter inbound channel: Error Error when reading
Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.

Please clear these points.
In PI system:
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
3. Using IDX2 import the IDOC meta data in to your PI system.
RFC destination to which direction , towards sender of IDOC ?
Port of which system sender system or receiver system?
What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
What will be the procedure of seeing complete message on SM58.
-->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
-->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
-->coming to IR you need to create the:
                    1. Receiver data type.
                    2. receiver message type
                    3. receiver message interface. No need to create the above 3 for sender.
                   4.while mapping source is your Idoc and target is your receiver message type.
                   5. while interface mapping source is Idoc and target is receiver interface.
-->Coming to ID no need to create sender communication channel and no need to create sender agreement.
-->create receiver communication channel and receiver agreement.
--->create Interface determination.
-->create receiver determination.
-->If message got stuck in SM58, unlock it by using double click or activate the selected message.
Thanks

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

Reporting communication channel errors in emails from alert monitoring

Does anybody know how to capture the error message reported on the communication channel and send it in the dynamic text of the email configured for alert monitoring?
I get the mapping error messages but all other message container element values seem to be blank.
None of the container elements (standard) defined seem to have the channel error message. in PI 7.0
Thx

Hi,
You can get all the alerts that were captured by the adapter monitoring i.e, communicaiton channel errors etc.
we can also trigger similar alerts for Adapter also when any adapter truns in to RED.
in RWB->Alert configuration-> choose adapter engine errors also then you will get alerts for adapter failure also.
If you need create alerts for each communication channel. in RWB->Alert montoring->Adapter type-> instead of giving * select indival commnication channel
for this you need to have alter configured for each Commnication channel in Alrtcatdef and RWB. so for each in RWB you select corerspoding communication channel.
You can monitor the sender and receiver service in CCMS, but I don't think you can monitor the commuication channels.
http://help.sap.com/saphelp_nw04/helpdata/en/45/e32b64f87c6f74e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
Thanks
Swarup

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

SAP PO EDI Separator Channel Error

Similar Messages

Maybe you are looking for