SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

Similar Messages

Site template changes not reflecting in new the already created site

I couldn’t figure it out myself how to use site template to modify the existing site created from the site template
So here is the simplified scenario...
I created a Site on Dev. SharePoint 2010, added a couple of SPD workflows, customized lists and views etc. Presented the functionality to the Stakeholders and it was accepted.
Now the Site will be used as a template and many instances of this Site will be created using these settings (template), so I just went ahead and saved the Site as a template.
Deployed the Site template to the live environment by deploying the .wsp file, and activated it on the desired site collection.
THE PROBLEM I'M FACING IS IN THE CHANGE MANAGEMENT: i.e. now the sites are being created and at some point in the future there is a suggestion to add functionality or a bug to be fixed.
MY APPROACH: I have created a sample instance of the template. I made all the changes to that template and re-saved it. This way the new sites which are created from that template do have all the fixes and enhancements.
THE PROBLEM: How can I update the existing sites that have already been created, to apply the same fixes and enhancements?
Thanks in advance

You could look at the Stack Exchange thread that seems to exactly match this question (from
here).
Think about using the features framework, as the closest you can get to updating the template is to update all the features that the said template is based on.
Beyond that, I can't think of anything that might achieve what you're after.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Condition type in contract not reflecting on to the PO release

Hi All,
I have a contract wherein i have two condition types which are set i.e. PB00 and ZM07. Now i've made some changes and removed ZM07 and instead put ZM05.
This new condition type (ZM05) is not reflecting on to the PO already released or on to the new line items that are being added to the already existing PO's. Kindly let me know what/where to change to effect ZM05 on the line items of release orders.

Hi,
One thing you could try is the Update button on the item Conditions detail tab. Run the selection for B Carry out new pricing
C Copy manual pricing elements and redetermine the others
"B" is pretty good for adding in new condition types that are added after the PO has been created.
Regards.

Changes not reflecting in JSP page

Recently we upgraded our server from orion to oc4j.When on the client side any changes were made in the java bean
its not reflecting immediately in the corresoponding jsp page or the application. We tried to look at all angels like class file in web-inf its changing there.The changes are taking place only after restarting the server. Pl give us valuable suugestion
Regards
Kumar

It is correct that the change in the JavaBean is not taking effect until you restart the server (as far as I know anyway).
If you are using version 9.0.4 or using a version that uses JDP 1.4.x try using the HotSwap tool which can dynamically reload classes on the fly. Excellent tool for development but not sure if it is recommended for a Production environment.
Also, if you are using JDK 1.4.x, try using JDeveloper 10g and it's excellent debugging tools for development, it will swap your classes into the running JVM if the debugger is switched on.

HP Pavilion Slimline s3707c PC will not boot up all the way

HP Pavilion Slimline s3707c PC will not boot up all the way; gives the following message:
Entering Setup
<F10=setup> <F11=System Recovery
<Esc=Boot Menu> <F9=Diagnostics>
Tried to install recovery disc; did not respond.
[Personal Information Removed]

Hi wjackson95,
When you get to the screen mentioned below, can you press the F11 key to enter the Recovery system that is on the hard drive? Alternatively, if you can press F10, you can go into the BIOS and change your boot order to put your disc drive before the hard drive so that the PC boots to your Recovery discs. NOTE: You may have to press F10 or F11 multiple times to get it at the right time.
You might consider opening your PC to see if it has dust buildup. If your PC has overheated, it can cause it to not boot. It can also cause heat damage to the interal parts.
For more detailed boot troubleshooting, see this HP Support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899280&cc=us&lc=en&dlc=en&product=3882331
Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

What can be done so that these files do not eat up all the disk space.

Dear Adviser
This is NOT a bug report or an enhancement request.
We are looking for advice on a customer support call.
We are using iPlanet Webserver 4.1 SP7 and iPlanet Directory
Server 4.12 on Solaris 2.8.
We are checking to see if there is any engineering
documentation or quick pointers on LDAP database file
sizes and cache file sizes that may relate to a
reported problem.
Thank you for your time and co-operation in advance.
We have been working on a TIBCO/Portal Builder customer
issue that does not seem to have guidance in end
user documentation. This is related to a significant
increase in LDAP and cache file sizes (which at this
point do NOT seem to affect any performance). Is this
something that you are aware of from your QA/performance
tests? The problem seems to have suddenly cropped
up and we are attempting to isolate the triggerring event.
We started with the possibility that it is
a. Solaris Platform issue
OR
b. LDAP issue
We have done several experiments to isolate specific
issues as described below. We have researched
Sun/iPlanet web site and technical sites on the net.
Currently, we believe that the LDAP database size is increasing
because the Portal has been configured with pages
that have a lot of "Personalized" panes. Users are visiting
these pages, and getting automatically subscribed to these
panes, which add corresponding entries in the LDAP server.
Please find below the listing of all the files (from LDAP
DB directory) which are growing very fast. Kindly advise what can be
done so that these files do not eat up all the disk space.
-rw------- 1 netscape applsw 32768 Feb 4 2001 numsubordinates.db2
-rw------- 1 netscape applsw 16384 Feb 4 2001 aci.db2
-rw------- 1 netscape applsw 16384 Feb 4 2001 copiedfrom.db2
-rw------- 1 netscape applsw 16384 Feb 4 2001 default.db2
-rw------- 1 netscape applsw 16384 Sep 14 19:07 uid.db2
-rw------- 1 netscape applsw 16384 Sep 14 19:07 sn.db2
-rw------- 1 netscape applsw 16384 Sep 14 19:07 givenName.db2
-rw------- 1 netscape applsw 32768 Sep 14 19:26 cn.db2
-rw-r----- 1 netscape applsw 32768 Feb 7 04:08 __db_log.share
-rw-r----- 1 netscape applsw 708608 Feb 7 04:08 __db_lock.share
-rw-r----- 1 netscape applsw 625000448 Feb 7 04:08 __db_mpool.share
-rw------- 1 netscape applsw 18 Feb 9 12:34 DBVERSION
-rw------- 1 netscape applsw 811008 Feb 14 10:14 apname.db2
-rw------- 1 netscape applsw 3702784 Feb 14 11:23 parentid.db2
-rw------- 1 netscape applsw 98304 Feb 14 11:23 objectclass.db2
-rw------- 1 netscape applsw 277479424 Feb 14 11:23 id2entry.db2
-rw------- 1 netscape applsw 67829760 Feb 14 11:23 entrydn.db2
-rw------- 1 netscape applsw 26017792 Feb 14 11:23 dncomp.db2
-rw------- 1 netscape applsw 81920 Feb 14 11:23 apjavaclass.db2
-rw------- 1 netscape applsw 24592384 Feb 14 11:23 apguid.db2
-rw-r----- 1 netscape applsw 4096 Feb 14 11:24 __db_txn.share
-rw-r----- 1 netscape applsw 8040951 Feb 14 11:24 log.02045
Do let us know what your advice is.
Thanks,
Ambareesh
([email protected])
Tibco Support

This may be perfectly normal behavior for the LDAP server. If some application is adding a lot of data to the server, the database will necessarily grow. You can look at the access log to find out the IP address of the client, the BIND dn of the client, and the operations from that client. Perhaps this will help you narrow down the culprit.

Ihone 4s lost all contacts. I tried to restore from backup but the error message now says there is not enough room. I have deleted all the apps without making any more room on iphone. Why did contact disappear and how do I get them back?

ihone 4s lost all contacts. I tried to restore from backup but the error message now says there is not enough room. I have deleted all the apps without making any more room on iphone. Why did contact disappear and how do I get them back?

In the simplest sense, archiving a file means making a copy that you never change and never discard. You already know how to do that.
iPhoto has built-in archival features, in the sense that it saves all versions of an image that you've modified. As long as you have adequate backups, you don't necessarily have any reason to archive an iPhoto library. If you want to delete images from the working library but still have access to them in case you change your mind, then you do need to archive those images. I don't have a specific suggestion as to how you should do that. You might post a question in the iPhoto forum.

I can not turn on icloud on my iPad2 that I just updated it iso5. on the settings screen the icon is there but it is not dark like all the others.

I can not turn on icloud on my iPad2 that I just updated it iso5. on the settings screen the icon is there but it is not dark like all the others.

Turn off the restriction to Allow Change to Accounts in Settings > Restrictions

I'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying

Can i implement TOUCH SCREEN facility in SAP(portal) or not??*

Hi Experts,
My requirement is that can i implement touch screen facility in SAP(portal) or not??
*If yes then please suggest me that how can i proceed with it??
The system developed will be like ATM System with Touch Screen.
its very urgent requirement any inputs will be highly appretiated.
Thanks and Regards.
Vinit Soni

HI,
I think yes, check these links
[http://www.guenther.cx/index.php/a.our+projects]
[http://www.guenther.cx/index.php/a.enterprise%252Bportals.html]
Thanks,
Vamshi

I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?

Try this:
http://support.apple.com/kb/HT2519

SAP Portal changes not reflect in all the servers without reboot?

Similar Messages

Maybe you are looking for