SAP_pp_019 heuristics creates automatic fixed pegging relation ship .generally we have automatic fixed pegging and manual fixed pegging
SAP_pp_019 heuristics creates automatic fixed pegging relation ship .generally we have automatic fixed pegging and manual fixed pegging .
Example :
1) created sale order and triggered GATP
2)It calls CTP where SAP_PP_019 is run and coresponding planning takes place and pegging relation ship are generated in product view
3)when I Trigger Gatp to same sales order .why the pegging losses as it is fixed pegging so it should not break while converting to production order ?????
please correct if am wrong in any of 3 steps
Thanks & Regards
Virender
Virender,
Expert Pravin has answered your question about Planning Procedures
I will make two small comments. In my CTP experience, I have never seen anyone use the SAP_PP_019 heuristic as a CTP heuristic. 019 is a pegging heuristic, and typically CTP uses some type of material planning heuristic (e.g. create supply elements). I am not saying that your heuristic is wrong, I am only saying that I have never seen it used in such a way.
I have further never seen an implementation for CTP where there were more than 2 different planning procedures in use.
You did not ask for it, but let me give you a small piece of advice. CTP and multilevel planning are not simple or trivial subjects. From your responses about planning procedures, I will draw the conclusion that your experience in this area is...somewhat limited.
Yes, you can go to SCN and ask for advice, and we will offer whatever help we can. However, the detailed troubleshooting techniques required to solve such a problem are not really suited to SCN postings. There are already 30 items in this post, and the end does not seem to be in sight.
If I were in the position of being responsible for solving this problem, and I had little experience to bring to bear, and there was no documentation which described the original solution in detail, then I would request local expert assistance to help me in this matter. If such assistance were not to be available, I would further request my management to engage an external resource to assist; one who has extensive experience in customized CTP solutions. A competent CTP expert can probably zero in on the problem in a few days.
Using only yourself and SCN as a resource, you may find a solution to your problem tomorrow, or you may not find it after months of searching. In most businesses I have worked with, this level of uncertainty would be considered unacceptable.
Good Luck & Best Regards,
DB49
Similar Messages
-
hello
i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i buy iphone5s now can i creat app for iPhone 6 if it has bigger display without buying it just test it on iPhone 5s
thanksOne of my favorite things about developing for iOS using Xcode is the Simulator. It runs any of the iOS devices simulated right on your Mac. If you don't have a hardware device to test your application on, the Xcode simulator will surely be your best friend.
So to answer your question less vaguely, yes. You can own the iPhone 5s and develop for the 6. There is no real release information of the iPhone 6 at the time anyways, so I would not let it play too large of a factor in your decision. -
Help me please!
Hi,
If you have not already I would change the Slide size to something that has a 4:3 Ratio.
The Buddy maybe trying to scroll left and right to see the whole slide although this shoud be controlled at you end.
I would open the Connection Doctor during a Chat (iChat's Video menu).
Check that both Bit Rates are relatively stable (there is always some variance.)
Anything over 5% particularly if over 500kbps is likely to be causing problems.
You could try limiting the Bandwidth (iChat Menu > Preferences > Video section) to 500kbps at both ends
It may pay to drop to 200kbps as a test. (you may lose the Side by Side presentation at this speed).
10:12 PM Tuesday; June 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Org unit relation ship periods
Dear All,
Scenario:-
I have created a root or unit,under this root org unit i have created additional org units but the validity period box contains to validity periods are there.
organisational unit :
Link text string :
The above two will be displayed as Object period and relationship period on the screen.
Here my doubt is if i enter the date for organisational unit beyond the root organisational unit its allowing but in case of link text string(relationship period) its not allowing.
can any body explain the logic behind this issue.
Thanks inadvance
Regards
Ananya.KHi,
System will allow you to create Any number of Org units as the sys doesnot know which is the root org unit , Sub unit but when your maitaing relation ship it will check based the relation your goping to assign.
Regards,
Sri -
How can provide parent-child nodes relation ships?
how can provide parent-child nodes relation ships?
I was under the impression that scenegraph is like a JTree. But in JavaFX only leaf node rendering in scenegraph. This situation was confusing my mind. In JavaFX CustomNode must be extending and return a group for custom leaf. If we want to a create parent-child node hierarchy we are create CustomNode that return a group and this group contain an another group,etc. So there is maybe only a way. If you learning to JavaFX first time.This way don't look familiar.
-
Pegging relation for stock got lost once we do changes to the SNP planned order.
Hello Experts,
Pegging relation for stock got lost once we do changes to the SNP planned order.
We are using a BAPI "BAPI_MOSRVAPS_CREATESNPORDER" to make changes to the planned order as per our business requirement.
However after changes the pegging relation got lost.
Please help, why and how to solve this.Dear Krish,
While creating orders using BAPI pegging relationship will be lost.
Could you be more clear which orders you are creating?
Some times dynamic pegging is possible.
Regarding pegging relationship please check the link, it may help you.
Pegging - SAP Library -
Relation ships in Org management
Hi Every one,
My first question is regarding maintaing org management relation ships .How we maintain relation ships between persons(s) in development system coz there will be no data available in development system.????
My second question is ,For example I created org unit A ,Org Unit B ,i assigned a position sr clerk to org unit A and sr Clerk to Org unit B. .Now my question is position in org unit B should reports to position in org unit A..and .how their relation ships are maintained????Hi,
1. I think u got the solution for the first one from amit,
2. This can be done using expert mode.kindly do the senario which u told and create relationship as u told which is possible here.
kindly check out and let me know if u have any concern.
Asha -
Adding another option in the list option in the relation ship tab
Hi,
I am working on creating another option in the list of option for the relations ship tab for the account details of Org type.
I was able to create the new Option and i have create a another event which is assign int eh application set but and it is showing in the detail area1 of the relations but when I choose that option no even it is getting fired. I have cloed the further relation ship option i cloned the structure and class and even but even then it is not getting fired. I have assigned the view linkkage ACC_REL but even then it is not getting fired. Please send me the list of table in which we need to do the setting.
Thanks
naveenResolved
-
SSAS ER-Diagrams relations ships
Hi
iam newly in ssas
i want to create ER -Diagrams in in one database
some fact tables has foreign key act has another Fact Table primary key in this how to create the relation ship between fact & fact table . fact to fact r relation ship is possible with
out middle of dimension table.
one fact table foreign works on another fact table primary key.
please help meHi Sheshu,
According to your description, you need to create ER -Diagrams for one database that is used to create a SQL Server Analysis Services database, the problem is that there are two fact tables in your database, now you want to know do we need a dimension between
two fact tables or can we create a relationship between two fact tables, right?
Generally, we use one fact table in one cube, so in your scenario, we suggest you to combine two fact tables into one fact table instead of create a relationship between two fact tables. Here are some useful information for you reference.
http://gopika-lasitha.blogspot.in/2010/05/how-to-combine-two-fact-tables-in-ssas.html
Regards,
Charlie Liao
TechNet Community Support -
Would like to Update customer relation ship (KNVP )
Customer data (sold to / ship to / customer group) is there in KNA1 table but relation ship is missing.
I would like to import customer relation ship (like ZG/WE for PARVW) in KNVP table, please suggest the API . I tried CUSTOMER_UPDATE but got error.
Edited by: Rahul Misra on Jun 24, 2009 1:58 PMThe FM CUSTOMER_INSERT is an update task function module, this FM is called by standard report along with other such modules after every check has been performed, it does nothing more than direct database update and MUST not be used in custiomer reports.
Look at thread BAPI for Customer Create, for [Alain Bacchi|https://forums.sdn.sap.com/profile.jspa?userID=3564066] answer.
Regards,
Raymond -
Can we Create new relationship in OM.What is the T-code ?
Can we create dotted relationship in om? let the relation ship between the AGM HR and GM HR its a direct relationship,but in case of Vp hr and exe hr is dotted relationship,How to mantain this dotted relationship.
please ans me
Thanks in advance
regardshi can u tell me how to maintain dotted relationship,
like relationship for create a chief is A 012
Job & position relation is A 007
Position & job is B 007
like that what should be for dotted relationship.
regards -
Shipping Point to flow automatically in vl01n
Dear Sdities,
1. I've done OVL2-Shipping point determination.. That's y Shipping point determination is happening & flowing to sales order.
But
When i go to Vl01N, thr shipping point i've to put manually
Can u plz reply where is the setting for Shipping Point to Come automatically in VL01N- after creating Sales order.
Kindly Responr
Thanks & Regards,Hello,
The configuration what you have done in OVL2 is correct, which determines the shipping point in sales order.
But when you use VL01N, shipping point will never come automatically, since at the time of your tcode entry of VL01N, there is no link between the sales order & the delivery transaction.
So you will have to enter the shipping point manually.
Additionally if you want, not to enter shipping pint manually, do one thing:
Goto VA02 & enter your sales order & press enter. On the upper left hand side you see "Sales Document"
Click on it & you will see "Deliver". Here if you click on deliver it will take you directly to delivery creation without having to enter shipping point manually.
Hope this resolves your query
Regards,
Dhananjay -
No transfer order created via VL10A for certain shipping point
No transfer order created automatically via VL10A for a certain shipping point.
For Shipping Point E004 the TO is automatically created in VL10A, but for Shipping Point E070 it's not automatically created.
Could you kindly let me know why TO is not automatically created by Tcd VL10A?Automatic TO creation depends the warehouse number or movement type. Can you check the warehouse number for both shipping points?
Regards, -
Custom Object & Relation ship in OM
Hi Exports,
How to create new object and relation ship in OM.
There is some specific requirment that create new custom object along with relation ship.
Please let me know.
Thanks & Regards
RajeshHeloo Dilek,
I have created New object and relation ship as suggested by you and I am able to save the record.
But when I went to Overview of the custom object for IT 1001 I am getting one stranage error "No time constraint exists for key 30001O 500215341001A 1 200901019999123199500354"
On the above error 50021534 Org. unit object (O), 50035486 is Custom object (99).
I have maintained TC for AXXX & BXXX as a 3 of subtype 1001 in table V_T777ZVK.
Please tell me where I did mistake.
Thanks & Regards
Rajesh -
i have an iphone, imac and 2 ipod touches 5th generation. I just purchased some apps and songs on the ipad with hopes they would transfer to all the other devices. some of them did go to all devices while others did not. when i go to purchases on one of the ipods they show up as not purchaced (even though they may be on 2 of the other devices). my iphone has them there, but it says waiting to download. its been a day and they are still waiting to download. I've checked settings on all and they are set to automatically download and all devices share the same apple id. not sure what ive done wrong and have tried several things. hopefully i haven't confused you too much.
My problem was that Software Update didn't check for updates every day, and maybe never...
Finally I found that: http://hints.macworld.com/article.php?story=20120824124203635
Basically all you have to do is open the Terminal and type:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate.plist ScheduleFrequency 1
The number, 1 in this case, means the frequency which Software Update is going to check for updates, so 1 means every day.
If this doesn't work you can try two things (or both, but in this order)
- Go to /Library/Preferences/ and delete the file: com.apple.SoftwareUpdate.plist, then open Software Update... to create a new file, and go to System Preferences to configure it again. Finally open the Terminal and try the command at the beginning of this comment.
- If Software Update continues without checking for updates every day, open the file: com.apple.SoftwareUpdate.plist and you will see a preference that is: ScheduleFrequency with the number 1 at its right and you will see that the type is String, copy the file to the Desktop (for example) and change the type String to Number, then drag the file in the Desktop into the Preferences folder and replace the first. It will work. (For this part you will need Xcode)
Maybe you are looking for
-
How to create an infotype in sap ecc6.0 ?
Hi all, I know i how to create an infotype in sap 4.7, but i am facing the problem while creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ? Wa
-
Hi, I'm trying to use a bean to store and validate user details. I'm obviously doing something wrong however as it doesn't work. I can't figure out why though. The code is below, Hope u can help, Pete The calling jsp page <%@ page language="java" imp
-
How do you message a rep about and iphone 6 order?
I would like to know how to message a rep about my pre order TIA!
-
recently, about three days ago, whenever I turn on my computer, a box appears with this message: An application named airport needs to access your keychain, but there is an existing version. Do you want tot change all your keychain items to allow the
-
So about a week ago my account "HipsterHD" was hacked. I received an email notifying me my account email registered was changed to "*edited for privacy*" from my previous "*edited for privacy*". I have sense then reinstalled my OS and tried to recove