SAP PP AFS solution configuration

Dear Friends
Can i have any complete PP configuration steps for SAP AFS solution?
Thanks
A N M Jamal

you can get a guideline from the following link:
SAP Best Practices Apparel and Footwear
http://help.sap.com/bp_af603/BBLibrary/Content_Library_AF_EN_IN.htm

Similar Messages

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

Pagefile for SAP Erp2005 and Solution Manager 4.0

Hi all,
I've installed SAP ERP2005 and Solution Manager 4.0 on the same server with Windows 2003 Standard 32bit.
The RAM on this server is 3325MB.
How many paging file I must configure???
At the moment I configured the pagefile size as defined in the installation guide:
1 RAM + 8GB that is 12285MB.
Is it correct????
For both instance I set the PHYS_MEM parameter to 2328 (70% of the RAM)...is it correct??
P.S. How to calculate the [BE] parameters??
[BE] = maximum possible number of user calculated from the size of physical main memory
Thanks in advanced
Moreno

I agree with Yaroslav,
you should NOT set those values:
em/initial_size_MB |----    [PM] |----    [PM]   |Mbyte     |
|---    em/max_size_MB |---    20000 |---   100000   |Mbyte     |
| em/address_space_MB |-----    512 |-----   4096   |Mbyte     |
|---- ztta/roll_first |-------    1 |-------    1   |Byte      |
|---    ztta/roll_area |--- 2000000 |--- 3000000   |Byte      |
| ztta/roll_extension | 2000000000 | 2000000000   |Byte      |
|    abap/heap_area_dia | 2000000000 |           2000000000   |Byte     |
| abap/heap_area_nondia | 2000000000 |           0 |Byte      |
| abap/heap_area_total | 2000000000 |[PM]*1048576   |Byte      |
|-    rdisp/ROLL_MAXFS | [BE] * 100   | [BE] * 100   |8KB Block |
|---    rdisp/ROLL_SHM | [BE] * 100   | [BE] * 100   |8KB Block |
|---    rdisp/PG_MAXFS |---    32768 |---    32768   |8KB Block |
|-----    rdisp/PG_SHM |
so... that [BE] value is not to be used.

SAP Digital signature solution in Invoice output PDF document

Hi,
We are trying to POC SAP Digital signature solution for Invoice output pdf document based on the OSS note 700495 implemengtation guide.
- Defining the log structure and database table.
- Defining signature single step and authorization group and assignment.
- Completed the configuration steps including system signature with authorization by SAP user id and password.
- Release strategy and Archiving NOT implemented for this solution as they are not required as of now.
Checked the above settings using DSIG_BOOKING_EX sample program and the same executed successfully without any errors and we can see the result 'Signature process was successfully completed by user XXXXXX'. Also we can view the signature log in DSAL Transaction.
Similar to the sample program code, Implemented the signature call in user exit ZXMCVU05(EXIT_SAPLMCS6_001) for Invoice output digital signature during VF01 create transaction.
In the process signature call processed successfully but the output PDF document does not have any signature.
Please let me know why digital signature NOT applied to invoice output pdf file. Is there any other process that need to be done?
Also if you have implemented any similar solution, please provide me the details on the same.
Thanks!

Ritwika,
Are the User Name and Password correct? Is the User assigned to the SAP_XMII_User role in Netweaver? On the iCommand's Security screen, is the SAP_XMII_User assigned as a Reader role?
Have you checked the Netweaver log? There may be more detailed information there.
Kind Regards,
Diana
Edited by: Diana Hoppe on Mar 3, 2011 9:50 AM

How SAP handles AFS Third Party Orders in ECC system?

Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Basically when the Dierct ship Sales Order is created, corresponding PR is created for it and using this User exit certain fields in this corresponding Purchase Requisition is filled from Sales Order but this user exit is missing in ECC system.
Could anyone please let me know how SAP handles the Third party Orders in ECC AFS system?
Thanks,
Ameesha

Hi Ameesha,
Did u find out any solution for it? bcoz, am also hving the same issue!!
thanq

Difference between Std.SAP R/3 & SAP MM AFS?.. pls urgent

Hi,
Can anyone tellme...
what is the main difference between
Standard SAP MM implementation &
SAP MM AFS implementation..?
Can you pls explain me in detail Or Steps...
If you can send me a document (Configuration document) it will be a great helpful for me,
Regards,
Srinu.K
Message was edited by:
 sapsrin
Message was edited by:
 sapsrin

Dear Sirinu;
I have replied a similar message in this forum. Anyway I will give you some tips. SAP AFS has many features which makes the MM different from standard. In an AFS implementation you might have to make decisions on following.
1. How you are going to manage the batches Every material in AFS are batch managed. So you need to check how you are going to use the batch and what is the data you are going to capture
2. How you are going to manage the Grids Grid in AFS is an important feature. You need to decide what kind of information you are going to capture using grids. For more information check the <a href="http://www.sapafs.net/2007/10/using-3d-grid-option-in-sap-afs.html">usage of 3D Grid here</a>.
3. How are you going categorize your materials and stocks In AFS you can use Categories to categorize the materials according to the various requirements of your organization
4. How you are going to tackle the seasonality Seasons are another very important aspect of AFS. You need to check and figure out how you are going to use this feature.
If you need any further clarifications you can contact me on [email protected]
Azwath Mohammad
http://www.sapafs.net

SAP Business one Solution Architect

Hi All,
What are criteria to become SAP Business one Solution Architect?
I have cleared both Solution and development exam. Can anybody suggest me the other exam ?
Thanks in advance
BBN

are you implementing SAP B1 or SAP r/3. please post your message accordingly.

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a. Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b. In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c. Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d. Click the Access tab, and then click Relay.
e. By default, open relay is blocked. The default settings are as follows:
u2022 The Only the list below check box is selected.
u2022 The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f. If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g. In the Relay Restrictions dialog box, click OK.
h. Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

SAP-IS-AFS study material needed urgently

Hi
I am basically a SAP-MM consultant working on R/3.
I am in need of SAP-IS-AFS training / self study material with excercises just like SCM600, very urgently !!
Can anyone help me out, where i can download or where i can get.
Thanks
Maruthi Ram

Dear Ram,
Please refer the link to get details on AFS - SD, MM ,etc:
http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm
Please refer the link ..
Re: Reg : ARun type
Re: Allocation run in AFS
That will solve the query on Allocation Run.
Please search in this forum with search text: AFS or ARUN Type..
Thanks,
Venkatesh.S.P

We have SAP CUA on Solution manager 4.0

Hi,
We have SAP CUA on solution manager 4.0,SAP BASIS component 700. Do you know what is the latest Support pack and version for solution manager and what is netweaver identity management.Which one is better for CUA environment
Thanks and Regards
Yakoob.

Hi,
Netweaver Identity Management (IdM) should replace SAP Central user administration (CUA) somewhere in the future. As far as I know SAP still supports CUA but doesn't develop further enhancements for it, because they see IDM as the new product. So when you still want to work with CUA then you can create a new one on your new SolMan and you have to move the administration to this one.
Regards, Basti

Search & Install SAP Notes using Solution Manager

Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
Can someone please share their experience? Can you also provide some documentation?
Thank you

Dear Ramesh,
Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
trxn: dno_cust04
Field Name                             Seq                   Field Val
URL_DISPLAY_NOTE             1              http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
URL_SEARCH_NOTE              1              http://service.sap.com/notes
Regards,
Shyam.

FIT SAP e-Ledger Solution Documentation in english...

Hi Guys
I'm looking for E-Ledger Solution installation documentation in English because the only one i found at SAP's is in Turkish.... ;-)
Any help should be appreciated...
Thanks...

Hi Bel,
You've to follow the following OSS Notes for installing SAP e-Ledger Solution:
1965087 - Release Note Electronic Ledger Management for Turkey 1.0 SP02
1870871 - Installation Electronic Ledger Management for Turkey 1.0
1995850 - E-Ledger for Turkey Consulting Note

Regarding SAP PI 7.0 Configuration of Integration Engine

Hi Experts,
We Installed SAP PI 7.0 Successfully.After that We Run the Template Installers for PI.
Here We Selected PI Post Install Process Option in the Template Field.
Q1) After Completion of this Should we Configure All IE , IS, AE Or Those wil be Configured Automatically ????
Q2) What are the Necessary Steps to Do Even We Run the Template Installer, To execute a Scenario Successfully.?????
Please Let me Know
Regards
Khanna

Here is an extract from the OSS note. I guess,this should answer your second question
Reason and Prerequisites
To avoid problems while using the configuration wizard (template installer )please check prerequisites for post-installation in SAP documentation. That information can be found in SAP Help Portal (http://help.sap.com --> SAP Netweaver --> Installation and Upgrade guide --> Installation --> 2 - Installation - SAP Netweaver 2004s --> SAP NetWeaver 2004s Installation Documentation).
Select your Operating System and Database and look for 'Post-Installation Steps for Usage Type *' in the dedicated document.
Important: You cannot use the configuration wizard after
Upgrade
Add-In installation (Exception: Configuration of Usage Type BI-Java can be executed after Add-In Installation)
Additional usage type enablement
System copy
Always install the latest available SPS + Patches before running the CTC.( You can find the latest LMTOOLS Patch at http://service.sap.com -> SAP Support Portal -> Downloads (Tab) -> Downloads (Menue) -> Support Packages and Patches -> Search for Support Packages and Patches -> Search for: LMTOOLS*P -> Download and Save the .sca. Apply the patch by using the SDM.)
The sequence is:
1. Installation
2. Install latest SPS + Patches (if available)
3. Run configuration wizard.
You can run the configuration wizard only once for initial configuration.
In these cases, you need to perform the corresponding configuration steps as described in the configuration documentation.
For more information on how to access the configuration documentation, see 'Accessing Configuration Documentation in the SAP Solution Manager'.

Sap wm RF id configuration.barcoding .

hi gurus,
anybody explain how to configure the RF ID in the sap system by step by step.
thanks inadvance,

Hi,
From my point of view, you can create a separate RF users for your different RF IDs, SAP can provide the standard solution for this, refer to the following document from help.sap.com
http://help.sap.com/saphelp_47x200/helpdata/en/c9/c93237d5c2cf12e10000009b38f839/frameset.htm
Good day
Tao

SAP EHP1 for Solution Manager 7.0 - Post Install Procedure

Hello Folks:
I completed Sol Manager 7.0 EHP1 installation on Win 2008 R2 with MS SQL in a sandbox environment. This is the first time I ever installed SAP on my own and i am in the process of performing post installation steps from Installation Guide.
In the install guide, there is no mention of creating a new client ex: 100. Could you please, provide a list of tasks that generally needed to perform after the installation is completed and before doing any configuration in Solution manager.
I have some very basic idea on the Basis but while going thru Installation Guide I am not sure if there any steps that generally need to perform to complete the installation. My goal is to complete the Sol Mgr installation first and then start preparing for ECC 6.0 Installation.
Thanks a lot in Advance.

Hi,
First - the basic post installation steps are:
1. sick t-code need to execute
2. se06 --> Perform Post-Installation Actions
3. RZ10 --> Utilities --> Import profiles --> Of active servers
4. execute sgen T-code --> This will take some time
5. setup STMS
6. create client (If custom required)
7. Take backup of the system
For the solution manager client you could use the default created '001' client.
Next you need to run the solman_setup template which 'sets up' the SolMan for usage.
Follow config guide at: https://service.sap.com/~sapidb/011000358700000308502009E.PDF
For installing the ECC system, only a install key(from SMSY) is to be generated from SolMan. But if you want to use the SolMan effectively, suggest you to run the entire solman_setup.
Regards,
Srikishan

SAP PP AFS solution configuration

Similar Messages

Maybe you are looking for