SAP PP Testing Engineer

Hi to all,
Pls share me the duties & responsibility of SAP PP Testing Engineer in real time.
Thanks With Regards,
Dinesh Kumar V.

HI Dinesh Kumar
Your role of job will be like
I will explain this with a simple scenario
I your company you have a PP related issue you have raised ticked to the support partner company they have resolved the issue and will ask you to check the result.So you will be checking it with your current business process and report the working status.
You may asked to test any new development,enhancement,customization related to PP and report it result and working status.
Thanks
Regards
C.N.Prashanth

Similar Messages

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Looking for a Software/Test Engineer position

Hello, I am looking for a Software/Test Engineer position in London or abroad.
I worked on several projects with Labview and National Instruments hardware (Acquisition and Generator cards).
Please refer to my CV and my LinkedIn profile for additional information.
uk.linkedin.com/pub/jean-félix-majurel/5a/223/a14/
Don't hesitate to contact me for an opportunity.
Best regards,
Jean-Félix Majurel
Attachments:
CV.pdf ‏316 KB

Hello DocJ,
We are located far north of Chicago in Gurnee, IL and are accepting resumes for a LabVIEW position. Please send your resume to [email protected]
Thanks

Test Engineer Opening in Virginia Beach, Virginia

Ultralife Corporation is an equal opportunity employer and affirmative action employer.Company Background Information
Ultralife Corporation, which began as a battery company, now offers products and services ranging from portable and standby power solutions to communications and electronics systems. Through its engineering and collaborative approach to problem solving, Ultralife serves government, defense and commercial customers across the globe.
Ultralifes headquarters is located in Newark, New York, USA (30 miles east of Rochester, New York).
Ultralife's family of brands includes: Ultralife Batteries, AMTI, Ultralife Energy Services, ABLE, McDowell Research and RedBlack Communications. Ultralife's operations are in North America, Europe and Asia.
Ultralife was incorporated in 1990 and became a public company in 1992
TEST Engineer- Virginia Beach, VA
Develops, maintains, and executes test plans and procedures using automated test environments in LabVIEW. Analyzes system requirements and reviews technical product/project specifications to assess and evaluate overall test and verification related requirements for the project. This may include complete product requirements such as Hardware, Firmware, Documentation, Licenses, etc.
Implements and maintains standards and procedures for testing; applies knowledge of industry/DOD standard best practices. Assists in the identification, analysis and documentation of issues, questionable functions, procedural problems, and inconsistencies, particularly related to verification and testing.
Interfaces with the project management, development and support teams to gather program information, understand project/program objectives, schedules, and constraints; participates in the development of test schedules and resource requirements, and communicates ongoing progress and status.
WORK PERFORMED:
Essential Functions:
•Developing ATE RF and characterization test solutions for highly integrated PA based modules.
•Developing test plans from device specifications.
•Implementing testing during device development and mass production.
•Contributing to manufacturing improvement efforts once a product is in mass production to achieve test time reduction, test quality improvements, yield enhancement, etc.
Additional Responsibilities:
1.Some travel required to support customer visits.
2.Other work as directed by Director of Engineering
QUALIFICATIONS:
Education:
•Bachelor’s degree and a minimum of 4 years experience test and automation experience.
Experience:
•Bachelor’s degree and a minimum of 4 years experience test and automation experience.
•Experience developing measurement technique and capability from DC-1.0 GHz.
•A strong background in hardware and software development/integration on ATE platforms in RF testing environments.
•Strong and recent experience with National Instruments LabVIEW and Test Stand.
•Experience in performing bench level measurements, correlation, and de-bugging.
•Excellent organization abilities as well as strong verbal and written communication skills.
•Experience interfacing and controlling test instrumentation and equipment in automated test environments.
•Experience with defect tracking systems and general CM procedures.
•Working experience with project management tools such as Excel and MS Project.
•Strong interpersonal skills.
To be considered for this position, applicants must apply online thru the following link:
https://home.eease.adp.com/recruit/?id=497349

Respected sir/madam,
i am surendra babu.now i am looking for a job
and i have one year experience in LABVIEW.
Herewith i have attach my resume.Please take a look.
if u find any openings on LABVIEW please forward my resume.
Thanks & Regards,
Surendra babu Pidikiti
Attachments:
RESUME-SURENDRA.doc.docx ‏42 KB

Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

Test Engineer Job Opportunity

Adecco Technical currently has several full-time permanent opening for Test Engineers at an OEM facility in Fort Collins, Colorado. Relocation assistance is available for qualified candidates.
ESSENTIAL DUTIES:
1) Designs hardware and software for manufacturing test systems for power supply products including Printed Circuit Boards (PCBs).
2) Develop test fixtures and programs for all assigned products.
3) Provides Statistical Process Controls for critical parameters of assigned products.
4) Provides Test Engineering support to Manufacturing.
5) Provide debug and troubleshooting assistance for production Techs.
6) Provides test processes for all SPA's on assigned products.
7) Reviews and approves RFC's and ECO's on assigned products.
8) Writes and maintains test procedures and pertinent ISO documents.
9) Develops labor standards for test operations for assigned products.
10) Accurately projects capital requirements and provides appropriate justification for those needs.
11) Establishes and implements a yield improvement program on assigned products.
12) Provides guidance to Development Engineers regarding how to make products more manufacturable and testable.
13) Other duties as assigned both in the lab and production floor.
REQUIRED SKILLS:
1. 1-5 years of recent related experience as a Test Engineer
2. 1+ years of LabView experience in a professional environment is a must
3. Ability to design and implement tests for electronic products
4. Production line/ production floor support
5. Component-level troubleshooting and repair skills
6. SMT and Through-hole Soldering skills
7. Ability to read schematics and blueprints
8. Written and verbal communication skills
9. Bachelor of Science degree in Electrical Engineering BSEE
The salary range for this position is $55-$75K/year DOE. If interested, send a cover letter and resume in MS Word format to [email protected].

Hi,
Just want to ask is this job for local for foreigner? What is the salary range for this job?
Thanks.
Hay

Test Engineer (LabVIEW/TestStand) Required - Detroit, Novi - Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Location: Novi, Michigan
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 10 years.
Please send me Private Message (PM) for the contact details to send your resumes.
Note that candidates must be authorized to work in US (H1B VISA)
Thanks
Vijay

cross-posted on https://lavag.org/topic/18822-test-engineer-labviewteststand/#entry113145
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Job Opening for Test Engineer in Detroit, Novi-Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 10 years.
Please send me Private Message (PM) for the email to send your resumes.
Note that candidates must be authorized to work in US (H1B VISA)
Still this position is open. My cantact number is 1-248 479 3055
Thanks
Vijay

Name:Anoop Kumar.K.V
AddressF1,SreeBhavan,SaradambaNagar,Ist Main Road,Jallahalli,Bangalore-560013,India
Contact Details:+91-9739180646
Email Address: [email protected]
Date: 02/ 12/ 2014
Hi,
I am a Software engineer with excellent academics and 8.9 years of industrial automation engineering experience in engineering and commissioning of various Poultry Feed Plants. Being specialized in for PLC (Siemens-S7-200, S7-400 and Schneider M340) and Labview2010 programming.I have enclosed my resume that will provide you with proper details about my educational background and work experience.
I am currently working at (Indian Industrial Machines Pvt.Ltd, Bangalore, India) and have gained a valuable experience here as a senior SCADA Developer. I am fluent with VB6.0, VB.Net, Labview2010 and PLC. This matches up with the requirements for the post in your organization.
I would like to meet you and discuss on this more. I would be glad if you could tell me when and where we can meet. I can be contacted at (+919739180646 ) or email me at ([email protected] or [email protected]).
Thank you so much.
Sincerely,
Anoop Kumar.k.v
Enclosures: Resume
Attachments:
AnoopCV.doc ‏222 KB

Test Engineer (electro-optical) full-time position in Los Angeles

I'm a recruiter working with OSI Optoelectronics and we are looking for a Test Engineer to design, build, modify, repair, troubleshoot and debug optoelectronic test systems.
This is a full-time position located in Hawthorne CA.
Must be US Citizen or Permanent Resident.
Responsibilities:
- Design and develop test fixtures, tooling, software programs, and procedures for specific products to verify products compliance to specifications.
- Validate, maintain and monitor metrology lab equipment and tooling for diodes calibration and ensure test measurement accuracy meets production requirements.
- Maintain scheduling of vendors for fixturing, program delivery, and interface and train technicians on procedures, process and repair.
- Customer interface on all test issues.
Qualifications:
- BS in Electrical Engineering, Physics or equivalent
- 2-5 years experience in optoelectronic testing or related field.
- Good understanding of metrology methods.
- Experience with optics and /or knowledge similar background is required.
- LabView programming experience.
Compensation: $55,000 - $75,000 + employee benefits

Hey Kmagel,
My name is Jerry Downing and I am an experienced RF system test engineer with extensive experience in hardware (i.e test sets, RF test drawers, PCB...etc.) and software test solution design and development. I have developed calibration and test routines (for mobile and base station applications of the UMTS WCDMA GSM and EDGE applications) in Labview, VB, VB.NET and TestStand. I am experienced in managing test solution development, contractors, contract manufacturers, and product line transfers. I have also completed PMP (Project Management Professional) training.
I have a consulting company named Downing Automation Consulting (DAC) in your area that focuses on automating test processes. I wanted to see if I might be able to speak with you further about your test needs. Please take a look at my web page when you have time. It lists some of my experiences. I would like to speak to you further about the specifics of what are the current and future needs at OSI Optoelectronics.
www.downingautomation.com
Thanks again for your time and Happy Holidays,
Jerry ([email protected])

SAP HR TESTER

Hello all
I am a SAP Hr Functional consultant , recently working on a SAP Hr UAT Testing Project . if you have any information on SAP HR testing please forward it to my email address
[email protected]
Many Thanks
Rama

My clients have recently finished configuration, and they want to go live . they ahve hired me to do testing on HR Reports, and are specific that i should be doing UAT Testing.
Please give me more info on UAT testing in SAP Hr environment
Thanks
Ram

Looking for a LabVIEW Test Engineer for Crane Aerospace and Electronics

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Is this position still opened?

Test Engineer in Ann Arbor, MI

Job Title:         Test Engineer
Department:   Operations
Reports to:    Director of Operations
General Summary
Plans, designs, fabricates and implements production/manufacturing tests for new and existing products and systems, applying knowledge and principles of high speed optoelectronic theory, testing methodology and procedures, and electrical engineering. Additionally, the Test Engineer is the manufacturing representative and interface for all test engineering tasks with respect to design engineering and new product introductions. Proficiency with development and use of testing software and hardware is required.
Essential Job Functions and Responsibilities
Problem solves issues with emphasis on systems, modules, electrical components and high speed interfaces.
Develops software, hardware, detailed work instructions and procedures for product test.
Develops manufacturing test criteria and product acceptance standards as part of new product introduction.
Transfers new product from the NPI process into manufacturing meeting product launch dates.
Characterizes test/manufacturing processes and drives to increases in manufacturing yields and efficiencies.
Testing and operation of high speed, multi-Gb data rate, optical transmitter and receiver type components utilizing equipment such as network analyzers, bit error rate test systems, and high bandwidth oscilloscopes.
Provides training and coaching to technicians on new tests, test methodologies, diagnosis and repair.
Contributes the development of the manufacturing strategy of the business.
Other duties as required.
Knowledge, Skills and Abilities
Bachelor’s Degree in Electrical Engineering or equivalent related work experience.
Two years experience in relevant electronics, semiconductor or optoelectronics field.
Strong analytical and problem solving skills to address quantitative issues and good verbal and written communication skills.
Knowledge of software and hardware development for optoelectronic products with emphasis in USB, GPIB, Agilent VEE and or NI Labview.
Familiarity with process/manufacturing engineering, Lean Manufacturing PFMEA and Six Sigma highly desirable.
Intermediate level skills with Microsoft Office, including Word, Excel, Visio, Project and PowerPoint. CAD and Statistical Software knowledge a plus.
Interpersonal skills necessary to work effectively with all levels with the organization. Must be able to operate independently and set own priorities with a minimum level of supervision.
Ability to stand and/or walk 40% of the time; sit and work with a computer or printed data 60% of the time; carrying, holding, lifting and reaching may be required. Must be able to handle equipment and/or product weighing up to 50 pounds.
The above is intended to describe the general content of and requirements for performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements.
For more information, Contact Scott Sober at [email protected]

Mmmm. Not in academics or football.
I'd like to point out that our coach did not have a heart attack from the shock of beating ND.
[Prayers for his recovery]
You do have good women though...or at least you did when I found my wife there many years ago.

Test Engineer Opening-LabView Programming Skills Needed

Basler Electric, serving the world market with power systems, control devices, and magnetic products for the past 63 years, is currently in search of a Test Engineer with excellent Labview software skills. This position will be located at our Corporate Headquarters in Highland, Illinois.
The Test Engineer will be responsible for the development of new and existing test software, hardware, and procedures for all products. This includes, but is not limited to, LabView and Windows programs. In addition, the Test Engineer will estimate new test hardware costs, provide support to for UL/CSA certification, back-up support for in-circuit testing of printed circuit boards, and serve as technical support for technicians.
Qualified candidates must possess a Bachelors degree in Electrical Engineering or Computer Science with 5 years of experience in developing production testing. Experience developing test software in LABVIEW is required. Also, must have a working knowledge of Visual Basic and Windows programming.
Basler offers a competitive salary and benefits package along with a great opportunity for career advancement.
Please send your cover letter, resume, and salary requirements to the e-mail address below. We prefer to receive attachments in Microsoft Word format or in an Adobe .pdf file.
E.O.E. M/F/D/V
Basler Electric
e-mail: [email protected]

Dear Sir/Madam,
I read your message in NI Job board and am willing to talk to you about this position. My background is in Electronics and instrumentation and i have 1.5 years experience .I am recently wroking with AVON meters Pvt. ltd as software developer in labview and C/C++.
My e-mail address is [email protected] I would appreciate your response.
Looking forward to your reply. Thank you.
Sincerely,
prabjit behl

SAP-XI Test Server File path

Hi all,
I am accessing the SAP-XI test server(Web Server
Provided by SAP). In this I am going to do FILE->IDOC
Scenario. Now which File path I want to mention in File
Adaptor to place the Source XML file?
regards,
Khaja.sk

Hi Khaja,
If you are placing ur file in the server itself then u can mention the file path as given below:
D:/usr/sap/trans/tmp/sender
Here the D: indicates the drive where ur server is installed.
Within the given path sender is a folder created to hold the input file.
Regards
Neetu

New version of sapyto - SAP Penetration Testing Framework

Hello list,
I'm glad to let you know that a new version of sapyto, the SAP Penetration Testing Framework, is available.
You can download it by accessing the following link: http://www.cybsec.com/EN/research/sapyto.php
News in this version:
This version is mainly a complete re-design of sapyto's core and architecture to support future releases. Some of the new features now available are:
. Target configuration is now based on "connectors", which represent different ways to communicate with SAP services and components. This makes the
framework extensible to handle new types of connections to SAP platforms.
. Plugins are now divided in three categories:
     . Discovery: Try to discover new targets from the configured/already-discovered ones.
     . Audit: Perform some kind of vulnerability check over configured targets.
     . Exploit: Are used as proofs of concept for discovered vulnerabilities.
. Exploit plugins now generate shells and/or sapytoAgent objects.
. New plugins!: User account bruteforcing, client enumeration, SAProuter assessment, and more...
. Plugin-developer interface drastically simplified and improved.
. New command switches to allow the configuration of targets/scripts/output independently.
. Installation process and general documentation improved.
. Many (many) bugs fixed. :P
Enjoy!
Cheers,
Mariano

Hi Mariano,
Thanks for the update.
We implemented secinfo restrictions 5 years ago, but used a rather complicated approach. We did some tests today (the "local" setting works okay so far) and will continue tomorrow.
We now use the HOST and USER-HOST set to "local" and let the application security deal with who-can-do-what and this works quite well; though we have encountered some external 3rd party server programs in some cases. It seems to be popular amongst the business folks and some of the products use the gateway monitor to comunicate with the SAP system to find out when it has completed processing.
I think this is a design error, but they of course think otherwise
What was interesting to note, was that we locked ourselves out of an unprotected system. We changed the gw/monitor from 2 to 1 in a test. This worked. But then the gwmon cannot be used to change it back to 2! To we tried RZ11, and experienced the same. So we changed it to 0 in a test, and then 1 was blocked as well. This appears to be implemented in the kernel, as even hobbling the application coding does not help. The parameter is only dynamic when decreasing the value and increasing the security.
We had to restart the whole system for the instance profile to take effect again. Rather noisy and a few developers could take an additional 10 minute coffee break as a result
We are testing this on 3 different releases with different config:
- 4.6C (46D)
- 6.40
- 7.00
The different config relates to:
- gw/sec_info
- gw/monitor
- auth/rfc_authority_check
Our intention behind this is to improve baseline security and harden some special systems further.
Cheers,
Julius

SAP PP Testing Engineer

Similar Messages

Maybe you are looking for