SAP PRELI for termination or hiring

Hi,
i tried searching this question on sdn but did not get the complete answer.
My question is - Does PLOGI PRELI works only for defaulting position while hiring(as written in its documentation)
or does this also work for defaulting position in termination action.
or is there any other config for termination.
Regards,
Manu

PLOGI PRELI default Position will work for both Hiring and Separation...
If you have integration between PA and OM...check the integration switches in table T77S0.
PLOGI PLOGI 01 (Your Plan Version)
PLOGI ORGA X
PLOGI PRELI 99999999
Mohan

Similar Messages

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Benefits Proration for new hires & no proration for terminated

Hi,
I have a requirement like this:
Whenever an employee enters an organization mid month, his health plans should be prorated. On the other hand if an employee is termianted any time during the month, his health pal amounts shouls not get prorated to the date of his termination, instead they should be processed for the entire month in payroll run.
I have tried with parameter PAR1 in schema(changed to PER and then BEG), but then only one of the cases is working with this change. So can you please help me out? Do you suggest I have a PCR for this? The PCR would look if the employee is hire, then prorate or if he is terminated then do not prorate.
Thanks
Sri

Hi,
There are SAP fixes for this already. Please look in the notes search -
SAP Note 725626 - Savings/ retirement plan not processed in first period
SAP Note 1160806 -PF and Pension contri.for mid-month joining & termin.
There should be something similar for your issue. Please contact SAP Support website and look these up. Its better time spent than re-inventing the wheel again !
-Roopa

Regarding SAP GUI For HTML

Hi Everyone,
My Requirement is Endusers needs to access applications from portal using SAP GUI For HTML.
Because Some users in site or remote place they need Need to access applications.
The Problem With SAP GUI For Windows it requires SAP GUI S/W Every Workstation.
Before What i requires and what approach should i follow.
What i will do in Portal,ITS And WAS.
Please Do Needful.
Thanks
SubbaRao Chinta

Hi Sarkar,
I Follow Your Article.i created service under its in ecc and activate the service.
and login portal and created sap IAC iview.after i click on preview
i got the error below
The following error text was processed in the system ECC : System error
The error occurred on the application server epsap05_ECC_15 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSU
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECC in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server epsap05_ECC_15 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then yo
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
What Can i DO for enabling Apllications Through SAP GUI.
Thanks
SubbaRao

How to deactivate the "left top corner SAP menu" for a particular screen

Hello Friends..
We have a requirement to implement a "Non Disclosure Agreement(NDA)" for one of our SAP systems. NDA screen will have 2 buttons, "I agree" and "I disagree" which pops up when you log in to the system(after filling up our user id and password and hit enter). If we click on "I agree", it will allow you to continue with the log in and takes you to sap easy access screen. If we click on "I disagree", then session will be terminated.
But, the NDA window which is being popped up is also a SAP screen which has SAP menu on top left corner. Without clicking on "I agree" or "I disagree" and if we try to select "Create session" option in SAP menu on top left corner, then it is taking us inside SAP(sap easy access screen) by bypassing the buttons.
Request your help on how to deactivate the "left top corner SAP menu" for this particular NDA screen. (SAP menu to be available with other screens and it should not be available just for the window which is being popped up after log in and before SAP easy access)
Many Thanks in advance..
Vinay

Hi Vinay,
Try this if it works -
in your first screen for the NDA screen, on the memnu bar select - EXTRAS - SETTINGS - Select the check box 'Do not display menu, only display favourites'.
on calling the next screen , disable this option in the PBO of the screen.
Try and let me know if it works.
Thanks & Regards, Swapnil Mishra

Error when testing SAP GUI for HTML

Hi experts,
i am getting the error "Service cannot be reached - the termination occured in system <sysid> with error code 403 and for the reason forbidden" when I test the service SAP GUI for HTML for transaction sicf. I am able to enter mit username and apssword und click login, and then iI get this error. Can anyone give me a hint?
Kind regards,
Simon

Hi,
Try publish all services on R/3, using SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

I cant see any thing any SAP MMC for my XI server.

Hi All,
I cant see any thing any SAP MMC for my XI server.
I checked the services SAPXID_00 and SAPXID_01, those sevices were not running. when i try to start the service I am getting error 1067: The process terminated unexpectedly. I have uninstalled and reinstalled the service with sapstartsrv.exe but no luck.
I have also check SAP Note 82751
when i checked the log sapstartsrv.log, I saw this error
MSETCLXIDEV\xidadm is starting SAP System at 2011/01/17 16:16:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
Error: 13, Open Logging-File "sapstart.log". EACCES*: Permission denied OR: The data is invalid.
Please help to resolve this issue.
Thanks
Rehan
Edited by: Rehan Manzoor on Jan 19, 2011 12:39 PM

Hi,
Is it that there is no entry in SAP MMC for the system? Can you try to manually add the System in SAP MMC and check?I or is it that the system is already added and there is no info in SAP MMC. It is possible that the MMC is not working properly. You can reinstall the SAP MMC or better install the latest one. If the SAP MMC is not the issue here then it is possible that tthere is a some permission issue involved here.Could you check the whether the user with which the services are being started have correct permissions or not.
I had an issue where my SAP MMC was installed in a windows system and my SAP system was in Linux(Redhat). And because of the firewall and a security feature called SElinux my SAP MMC was not showing any information.There was a similar issue where i had to upgrade the LM tools. You can download the latest Lifecycle management software from SMP.
Regards,
Jyotish

Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

Unable to Print Purchase order automatically using SAP GUI for JAVA

Hi SAP gurus,
Some of the PC's in our company use windows and some LINUX. Therefore we use two types of SAP GUI. One for windows and the other one JAVA. PO approval was set to print automatically. In a windows setting, there are no problems with this setup. But in SAP GUI for JAVA, no print outs are produced and no error messages are displayed. I am using SAP GUI for JAVA version 7.10 ver 6. and I use Front end printing for linux access method G.
please help,
gungertz

hi gungertz,
You can use U type access method for printing SAP document using linux desktop.
Please refer to my blog posting here (http://sapbasis.wordpress.com/2007/08/23/print-sap-documents-using-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

SAP Tables for Open Customer Orders and Sales History

Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!

hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli

Shift+F2 not working in SAP GUI for ITS

Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
Kavitha

ITS THE PROBLEM IN DEV NOT IN PROD ECC SYS

What is the new sap note for Ptax slabs of FY 2011-12.

Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.

Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha

Error during DatabaseCopy using SAP tools for SQL Server (v7.12)

I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
 function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AM

This is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh

SAP Exit for Current Posting Period

H All,
   I am executing a query and it should always take the Current Fiscal Year & Current period into consideration. I don't see any Standard SAP exit which is provided for this. There is an SAP exit for Fiscal year/Period but I need both of them seperately.   Can anyone please provide a sample code for "Current posting period".
Points will be assigned!
Thanks a lot!

Hi Sia
Here is some cmod code that might help:
These should be run in i-step = 1
DATA: l_period        TYPE t009b-poper,
          l_txt4(4)      TYPE c.
*Variable ZCCCFYEAR that defauts to current Fiscal Year
        WHEN 'ZCCCFYEAR'.
          l_txt4 = syst-datum(4).
          l_period = syst-datum+4(2).
*Handles FiscVarnt, period 6 is end of year so period 7 is new year
          IF l_period > '06'.
            l_txt4 = l_txt4 + 1.
          ENDIF.
          l_s_range-low = l_txt4 .
          l_s_range-high = ''.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
*Variable ZCCPPER that defauts to current Posting Period
Code adds 6 to current year period to be inline with Fiscal Year Variant (ie.per1 = july(7)),
        WHEN 'ZCCPPER'.
          l_period = syst-datum+4(2) + 6.
          IF l_period > 12.
            l_period = l_period - 12.
          ENDIF.
          l_s_range-low = l_period.
          l_s_range-high = ''.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
Hope this helps
Josh

SAP PRELI for termination or hiring

Similar Messages

Maybe you are looking for