SAP-PS(Actual & plan cost)
1)When i am calculating my plan cost for an activity whose duration is 10days , working is 8h/day and rate is 50/hr , my plan cost is coming rs. 8000 instead of 4000. can anyone help?
After confirming an activity 100% , actual cost is not coming. Is there any customisation in confirmation or at any other place?
Regards,
Dear Hemant Sir ,
As I am new to SAP-PS , so after applying your solution also , I am not getting the desired results. So I am giving complete details of work centers and activity types defined by me as problem lies here only.
Work center :-
Basic data tab
Standard value key = sap0
Default value :-
Control key=ps01
Capacities tab :-
Other formula =sap004
Scheduling tab :-
Other formula=sap004
Costing tab :-
Co area =
Cost center=
Acttypeint pro =
=sap008
In capacity tab :-
Start=8.00
Finish=17.00
Break-1.00
Uti=100
Cap=1
Activity type (kl01) :-
Unit=h
Cat=*
Atypcat=1
Cost element=
Kp26 :-
Plan dis dis u p p p pl
8 2 2 h 50 50 00001 1
Where is the mistake ?
Regards,
Similar Messages
-
Actual & planned costs calculated while creating Plant Maintenance Order
Hi All,
I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
Thanks,
AjayYou need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
This can be done via transaction KP26, but is usually performed by your Finance team.
PeteA -
Tables & Table relationship to find ACTUAL & PLANNED COST for ACTIVITY ELEM
Hi Guys,
I have to create a report for Project, WBS, Network, Activity and Activity Element to show :
Reporting period: March 1,2007 to March 25, 2007
Planned cost ( (from March 1, 2007 to March 26, 2007)
Current reporting period (from March 1, 2007 to March 26, 2007)
YTD Actual Cost (from Jan 1, 2007 to March 26, 2007)
Kindly let me know the table to get the ACTUAL COSTS and PLANNED COST with relationships.Hi,
Refer to the BLOG
SAP Project System - A ready Reference ( Part 2 )
Hope it will help full
Regards, -
Data for Actual/ Plan Cost and Budget
Hi All,
Can you please adviseme which content i need to activate to get the Actaul, Plan cost and the Budget Data in SAP BW.
Do i need to exploer CCA cubes or Fund managment Cubes.. Please let me know... I need to know the Tables in R/3 Side for budget data to make sure that in R/3 we have budget data..
Please let me know.
Thank you
SAPHi there,
For those check in here:
[http://help.sap.com/saphelp_bw33/helpdata/en/d3/561be24e8c11d596f30000e835339d/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/60/0f07d3532c864aab7ec5f113146da2/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/26/d0cccc8d98c344925915ec81d5a421/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/43/de43fcf6e2154bbbbcecbc63cdf287/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/23/d5cf85683c3348b2189199e49a35cf/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/ad/be383fd98d1201e10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/1a/8c42588afe11d496d80000e835339d/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/d3/29ae399c1a6651e10000000a114084/frameset.htm]
Hope this helps.
Diogo. -
guru,
in production order,cost------>analysis ,i am not getting actual/plan layout,
please helpHi Guru,
You can get it this combination of Cost Element Plan-Actual, Plan Qty , Actual Qty in the "Cost Trend" layout itself.
Once you choose that layout, then you go to "change layout" again and select "Plant Qty" and "Actual Qty" fields. You will be able to see the above comparison.
If you want it in a report format, go to KKBC_ORD transaction, give the Order number, chagne the Layout once you get the report, select "Plan Qty", "Actual Qty" fields...
Pls revert back if you face any problem...
Srikanth Munnaluri -
GR for a Production order to be controlled on actual /planned cost
Hi,
When I do a GR for a production order I want to restrict the GR if my actual cost of materials consumed for the production order is less that 80 % of the planned cost of that production order. There is no provision for restricting the above.
When GR is done for a partial quantity of the production order, the system should consider and compare the GR quantity material cost against the same GR quantity Planned cost in the production order. If the GR quantity actual material value is less than 80% of the GR quantity material planned value, then the system should stop the GR to stores.
Eg:
Production Order for 10 Units of material X
BOM for X are Material A, B and C
Planned quantity to manufacture 10 units of material X is: A 10 unit, B 10 Unit, C 10 Unit
The planned value for the material BOM is : A 100
B 75
C 25
Total Value to manufacture material X is Rs .200
Case 1
If only 5 units are manufactured using the production order.
The GR to stores must be allowed only after the system check the total actual materials consumed in the production to produce 5 units exceeds 80% of the 5 units planned material cost.
Planned Material Value Actual Material Value
A. 510 = 50 A. 59 = 4
B. 57.5 = 37.5 B. 56 = 30
C. 52.5 = 12.5 C. 52 = 10
Total planned material Value is Rs 100 Total actual material Value is Rs 85
The above case shows that the actual material consumed in the production order is more than 80% of the planned materials. So, the system should allow the GR to stores.
It should check only material cost only.
Case 1I
If 10 units are manufactured using the production order.
The GR to stores must be allowed only after the system check the total actual materials consumed in the production to produce 10 units exceeds 80% of the 10 units planned material cost.
Planned Material Value Actual Material Value
A. 1010 = 100 A. 109 = 90
B. 107.5 = 75 B. 56 = 30
C. 102.5 = 25 C. 52 = 10
Total planned material Value is Rs 200 Total actual material Value is Rs.130
The above case shows that the actual material consumed value in the production order is less than 80% of the planned materials. So, the system should not allow the GR to stores.
It should check only material cost only.
CAN ANY ONE SUGGEST ME ON THE ISSUE
Regards
Madan MohanMadan,
Try using the userexit in enhancement MBCF0002.
(A) Now the Planned cost can be calculated from the RESB table passing the Order no. For all the line items in RESB calculate the planned cost = Price * Qty.
(B) For actual costs take it from AUFM for mvt type 261. The fields DMBTR will give you the value. Sum for all line items.
Now suppose the GR bing done now is 5. This you will get in the user exit. In the exit check from CAUFV whta was the GR already posted. Say this is 2. So the total GR is 5 + 2 = 7.
Planned cost for 7 = (A) / Order Qty * 7
Actual cost = (B)
Compare planned and actual and give yr message,
rgds
ram -
Target/Actual/Planned Costs inProduction Order
All,
Can any one explain with example how planned, target,actual cost are calculated for a production order. and also when exactly these are recorded.
Thanks in advance
SivaramHi Sivaram
Target Costs is Std costs for actual goods delivered
Actual Costs are for actual cost of material and activities for actual delivered stock
Here, delivered stock is same in both only the costs consdiered are diff
The diff between target and actual costs is posted to variance.
Goods movement is done with actual price of raw material generally. If u hv price contrl S for RM then it is at standards and all variances are only related to quantity.
Actual costs are compared with standard costs of goods delivered to stock and varainces are calculated for the production order
Regarding scrap costs - it should be separate line item. It depends on many other settings in BOM, Routing, MM and Cost comp structure. Depending on where the scrap is defined calculations are done
If u have defined planned scrap, and is part of cost comp structure, u can get plan vs actual scrap costs
You can also have scrap as not part of cost comp structure and record only actual scrap costs.
Please assign points if the above clarifies further as a way to say thanks -
Hello Guru's
My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
Please help on this to going forward.Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks -
How can i calculate my planned and actual labour cost with fields from tab
Hi,
i want to calculate my planned labour cost for all operations in my production order. how can i retrive form the tables and how the actual planned cost gets calcualted. where can i see the overhed calcualtion of the material and labour.
please suggest.
regards
madanHi,
Planned cost is nothing but the Standard values which you give for each opearation in the routing.
The actual values from the confirmation for production order
The following table and fields you can get the values
PLPO, AFVC - look for setup time,labor time,machine time fields
AFRU - look for the required fields setup,labor,mcahine time etc
Thanks and regards
Murugesa -
Reoprt for Total Plan Revenue & Cost vs Total Actual Revenues & Cost
Hello Gurus,
Business has requested to extract overall plan VS actual values and total plan revenue & cost VS total actual revenue & Cost for all open sales orders Is there any report to fulfill this requirement. If yes please let me know how to get data from SAP.
Appreciate your help!!
Regards,
Prakash.Stil there is no reply yet.
-
Differentiate Planned Cost, Actual Cost & Targeted Cost
Hello Friends,
I am searching for job and went for interview in Wipro. They asked me the difference between Planned, Actual and target cost..... I tried to search on Google and SAP Blog's but couldn't find the appropriate or understandable answer yet, So it would be great if you you can guide me a bit on this......
Thank You,Hi,
Any PP related queries you can search in Forum ERP: Manufacturing.
Pls refer the link.
planned cost and actual cost
Thanks,
nandha -
Table of planned cost & actual cost
Dear PP experts,
I want to create Zreport. for that I want the table & field of planned cost & actual cost. Please tell me.
Thanks
Jayesh
SAP PPDear.
Planned and actual costs of prod order from COEP, COSS, COSP S027 tables
production order shows the planned cost based on the quantity structure.
Please refer my reply in this thread for details,
Re: Actual Halb Material Cost
Regards,
R.Brahmankar -
Report for extracting the actual and planned cost from service orders
HI all
we are creating a report in BI for Module - Customer service . LIke , the report is all about how many complaints created in the system and how many completed technically and what is the cost involved for each complaint .
Like we want the comparision between the planned cost and the actual cost .
Now to give the logic to the BI Team for planned cost and actual cost , please suggest the flow of logic or table flow to arrive the planned and actual cost
thanks in advanceHi Marthand,
I am not sure which datasource your are using. In this case, you can use the 0VALUETYPE to differencitae between th eplan and actuals. Normally Plan which is budget will have value 050 and for actuals will have 010. For costs, you will have one key figure and at the reporting level, you will have the costs restricted by the value type for plan and actual to make comparisons.
Hope this helps.
Regards,
Srinivas -
Currency in 'Cost Centers: Actual/Plan/Variance' report for specific user
Hi there CO people, I'd like to ask about currency settings in CO S_ALR_87013611 report (Cost Centers: Actual/Plan/Variance)
The question is ... where can I define the currency in which report output should be displayed?
I've got such situation, that amounts for USER_X are displayed in CURR_X currency, whilst for USER_Y amounts in report are displayed in CURR_Y currency.
Could You tell me some tip? Or give some literature-track to follw? I'd be thankful for help. Greetings. P.USER_X -> TCode: RPC0 -> Tab: Report currency -> Tick 'Objeck currency' (Before was: 'Controlling area currency')
now USER_X has got the same currency as USER_Y
That solved my problem
Greetings -
User is trying to acces t code S_ALR_87013611 Actual/Plan/Va Cost Center
User is trying to acces t code S_ALR_87013611 Actual/Plan/Variance and is getting the error message. There are no changes done to the user role.
The message comes as below :
The report 'Cost Centers: Actual/Plan/Variance' is incomplete
No authorization for 20 of 67 read records.
This type of messages are found in 2 or 3 users. A s per feedback recieved from project security team some user got this problem & later on they stopped getting these type of error .
The user also says that suddenly from last month they started getting this error for report S_ALR_87013611 .
If anyone has faced this issue please let me know the resolution .Hi
Seems to be a pure authorization issue... Seems they have no auth for some Cost centers / cost elements
Go to SU53 when you get such error and you will come to know of the reason
br, Ajay M
Maybe you are looking for
-
How to get the long text into text area
Hi, save_text is working fine . Now I want to display the text in text area . am using read_text fm for this and data is coming into the internal table of the function module. how shd I display that long text into text area and that text shld appear
-
hello, i've just bought a Z10. i've downloaded and installed the main software. however, my z10 has been stuck in 'searching for updates' mode now for 2 hours. i have restarted in 3 times but nothing it still defaults to 'searching for updates'. any
-
In mode of taking a picture or videoing
whenever I set the BB 8330 into picturetaking or video recording, the BB freezes and I have to reboot it. No problem with viewing pictures or videos. Hope someone out there has a solution. Thanks Solved! Go to Solution.
-
Is there any way to create a dynamic work-area, similar to cl_alv_table_create=>create_dynamic_table????
-
I made a quiz using a Flash template. I sent it to our LMS (Learn.com). When I attempt to launch the quiz I get the following error message: 'g_intPollSecs' is undefined Would anyone have any ideas as to what might be going wrong? Thanks