SAP PS Certication and Study material required
Dear All
Am planning to appear for my PS certification. I dont have relavant study materials for the same. Kindly send me a copy of the PS material to my email id [email protected]
Thanking everybody in advance
Murali
Hi tushar
can u send me the certification material for PS.i am planning to write in Jan.My emailid is [email protected]
thank you in advance
mahesh
Similar Messages
-
Product costing configuration material and study material
Hi all,
Can any one pass me the Product costing configuration material and study material email id is [email protected]
thanks in advance
Regards
vijay
Edited by: vijay matlani on May 11, 2008 11:17 AMhi
Product costing documentation
http://www.sap-topjobs.com/SpecialPP/746.html
nagesh -
SAP BW 3.5 Certification Material required ? -- Urgent plz
Hi ,
I registered for SAP BW 3.5 examination on 10 aug. I desparately in need of
TBW10, TBW20, TBW30, TBW40, BWD35 (Delta - Reporting WHM, Extraction, SAP BW 3.0 3.5), TBW45 (Business Planning and Simulation)
material.
If any have kindly send it to anilkumar.bejjanki@gmail id please.Your help is appreciated.
Thanks in advanceThese are the sections that would be tested in the certification exam.
1) Data Modeling --> 8 questions (BW 330 covers these questions)
2) Netweaver - Technical scenarios --> 8 questions (the PPT that i sent would cover this)
3) Authorization --> 4 questions (BW365)
4) Warehouse Management --> 20 questions (BW310)
5) Extraction --> 12 questions (BW340, 350)
6) Reporting --> 20 questions (BW305, 315)
7) BPS --> 8 questions (BW370 or TBW45)
I started my preparation exactly 4 weeks before the exam. I practiced for about 10 days on the system.
I studied 8-10 hours per day and finished my first study just 9 days before the exam.
Then it took for about 7 days for the first revision and I made a second revision in 2 days.
Here is the order of the books that i suggest you to study (if you are planning to take the exam):
1) BW310 (Don't study Archiving i.e, 11th chapter)
2) BW340 (Don't study ETL with Datastage and Open Hub service -- not required for certification exam)
3) BW330 (All chapters are required)
4) BW350 (FI-SL and CRM not required for the certification exam)
5) BW305 (All chapters are required.. don't neglect CSS part, MIME repository... though they are quite boring..I studied them...and i got 2 to 3 questions from them)
6) BW315 (All chapters are required)
7) BW365 (All chapters are required)
8) BW370 (15 chapters would be enough..concentrate more on first 11 chapters..I got 8 questions from the first 11 chapters and 13th chapter .. web interface builder)
I suggest you not to buy any certification exam books...it's waste of money. I bought 2 books...and i never opened them as someone suggested in the forums that the questions would come from the SAP offficial training material..I concentrated revising them 2 times rather than taking any practice tests...and in fact, I did not take any practice test also.. -
SAP BASIS Books or study material from begning
Dear Experts,
As i am very new in SAP BASIS, although i am in BASIS since last two years but i am having only overall ideas like authorization and taking backup but not much command over that, in every interview which i faced not selected, please suggest me some good books or study material so the after reading those books i wiil be in position to crack that, also tell me the procedure how i got certified in SAP BASIS during my job period after 3-4 months of regular study of those material at home.
Thanks in advance
Sanjay Kumar Jha
09731350017Hello,
I know it is old thread, just keeping as some use full information.
For Full SAP Basis material and online Training please visit: http://sapscn.com/sap-basis.html -
SRM /APO study material required
Hi Gurus
I am new to SRM and APO. Can someone give me some links, blogs, etc where I can find SRM and APO study material.
Please help
My email i.d is [email protected]
ThumilanHi
I am in need of the same study materials. Could anyone help me?
Well, thanks a lot in advance. -
Sample papes and study material for certification
Hi All,
I want to apply for SAP Certification(Certification ID (Booking code): C_TEP12_04s
Will u please help me out with some study material or sample papers for it.
Please take it as urgent.
Main topics coverd are Portal Content, Web Dynpro, Visual Composer etc.
Thanks in advance!Hi,
Refer this threads
vc
Visual Composer Capabilities
EP
/thread/402658 [original link is broken]
EP materials
Webdynpro
what is webdynpro?
Webdynpro Material
Regards,
Senthil K. -
List of SAP B1 modules and sub module required
Hi Experts
Can you tell me where I can find a complete list of all the module and sub modules available in SAP B1? I have tried to run a query on table OPRM which is displayed in System Information when I am in Auhtorisations table but SAP B1 and SQL server doesnt recognise the table name either in my SAP B1 database or in SBO Common.
Thanks
JonHi Jon,
You may check this thread:
Table Name for Authorization
Thanks,
Gordon -
Dear Friends,
I am new to MM, please provide me a good documents and presentation on my id [email protected] i am very thankful to you.
Thanks
Jaihi,
follow the links:
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
check this out
MM flow
MM flow
MM flow
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://sap.ittoolbox.com/documents/popular-q-and-a/sap-mm-interview-questions-3586
http://www.sap-img.com/materials/common-sap-mm-questions.htm
http://www.sap-img.com/mm015.htm
http://www.ebookmall.com/ebooks/sap-mm-2F-pp-interview-questions-answers-and-explanations-sap-production-planning-certification-stewart-ebooks.htm
hope this may help you,
Regards,
Srinivas -
dear friends,
can u send me fi/co ecc 5 or 6 material, i.e., acxxx series pdf files, and closing cockpet material,
i will reward u excellent points,
regardsx,
rajendradear friends,
my id is [email protected], please send me ecc 5 or 6 material, fi/co materail, especially acxxx series files,
i will reward u suitable points,
regards,
rajendra -
Study material require for LC reader extensions
Hi,
I am very new to LC reader extension. I have livcycle server, workbench and designer setup. I am able to orchestrate process on workbench and able to design forms using designer.
But when i save the pdf with some data. It is not saving the content of the filled pdf. For this i need to incorporate reader extesion. My client is ready to take license for reader extension whatever it costs.
But as i told i am very new to this. I do not know how to install it or configure it with adobe LC workbench or designer or both.
Can somebody provide me material how i can install and make my pdf forms reader extended.
Regards
Sunil GuptaI would suggest that you look in the documentation at http://help.adobe.com/en_US/livecycle/9.0/adminHelp/admin.htm?content=000145.html as this tells the process in detail and has links to other documentation as well. I assume that you are installing this on a current ES2 server; the process is a bit more complex for older versions, but the documentation does tell the whole tale.
An evaluation reader extensions credential is available with the LiveCycle trial download. You can find this in the upper right corner of the LiveCycle section of the developer center, or http://www.adobe.com/devnet/livecycle.html There is also significant new content available on the developer center such as "LiveCycle in three days" that may be of use to you.
Also, note that Cafe can be downloaded from the developer center and its search tool is excellent for finding the resources you may need. For instance, I did a search on "reader extensions credential install" and found the information in the first paragraph in the first few hits. -
Sap mm md04 and ms04 stock requirement and long term planning issue
Hi guru's,
i have one issue regarding MD04 and MS04. in MD04 3 storage locations were showing. in that the stock in 2 storage locations was excluded due to no long term plan.
now if we see in ms04, these 2 storage locations are not appearing. now my logistics manager wants to maintain the long term planning for these two also.
in md04,,, 3 storage locations available ..same like ms04 should follow
provide the solution as soon as possible
Thanks & Regards
Prasad.Mukesh,
To change the forecast from occuring at start of period ( month) you can always select the Schedule line Tab in MD61,MD62. then select period indicator as Day format as shown below
Per. Ind Date Qty
D 17.05.2010 30
D 15.06.2010 40
D 15.07.2010 50
System will then plan PIR (forcast) based on dates assigned by user instead of being placed on the first day
of the period. This will prevent forcast to fall into the previous month. Also it will resolve the capacity issue you are facing.
If you have more questions please come back.
thanks,
Ram -
BI7.0 certification material required
Hi All,
Could any one please provide me BI7.0 Dataware housing and Reporting material required for Certification exam.
It would be really helpful if they are of MCQ type.
Thanks in advance.
RahulHi
Check out the following links for BW 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
What's new in SAP NetWeaver 7.0(2004s)? - An introduction to the functionality deltas and major changes
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
Almost All BI 7.0 Books and Material.
This link is very useful
bw 7.0
http://it.toolbox.com/blogs/sap-bw/sample-certification-questions-3479
Hope it helps
Regards
gaurav
Edited by: Gaurav Paul on Sep 29, 2008 11:01 AM -
SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions
Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS. Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab. Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective? When would a Developer pick one over the over?
Thanks for any advice
-DaveHi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc -
Customize the changes in pricing as per the SAP for Domestic and Import
HI FRIENDS ,
To customize the changes in pricing as per the SAP for Domestic and Import Material cycle
how to handle it ,
thanks
samalHi,
Two template pricing procedures (one for domestic and another for import) are available as part of standard.
you need to tailor them to your needs.
Hope this helps. -
Help-study material for rfid and sap integration required
please any body can help me to get study material for sap-RFID integration
Here's some additonal ideas from SAP Education:
Education website http://www50.sap.com/useducation. Although the education website url will not direct the person to any specific courses if you type in 'RFID' and then press enter; seven courses that include RFID are listed and offered through SAP education.
The RKT website(Rampup Knowledge Transfer on Service Marketplace) https://websmp202.sap-ag.de/rkt-rfid will direct a person to RFID specific course material.
The http://www.sap.com/rfid website is another good site for RFID information but does not list education courses. A person will find whitepapers and introductory information there.
cheers,
Marilyn
Maybe you are looking for
-
DB Table for Layout Variant in ALV report
Please help me by providing the table name which will get an entry when we save Layout Variant in ALV(OO ALV grid) output.
-
I got a new iPod Nano for my 80-year-old father who lives with me. I already uploaded his cds to my iTunes account, but when I connected the new iPod to my Mac to put his music on it, the program automatically named his iPod with MY name. I want to
-
My iMac no longer can display to a secondary monitor
I had my iMac connected to a Samsung TV via the following: iMac --> displayport cable to DVI --> DVI to HDMI adaptor --> Samsung TV After doing some updates on OSX Mavericks this no longer works. The TV detects that there is something because the inp
-
How do I create track aliases in iTunes?
I have a huge playlist consisting of over 2000 tracks and sorted in a particular way (for which I use text in the Comment field). I wish to insert 'breaks' at quite a number of different points in this playlist, for which I have created a music "jing
-
How to easily change used namespaces
Hi All Is there an esay way or what is the best practice to change all the used namespaces (for all models, controllers and so on) in a dynpro project, e.g. from com.<companyname>.<projectID> to com.<companyname>.pct.<projectID>? Thanks