SAP QM: Copy Results recording error - Problem class medium

Hi,
Can anyone help me to resolve one error message u201CProblem class mediumu201D Number 1 during copying of Results recording from one IL to another IL as explained below.
Origin IL and Target IL has same sample size qty:
Origin IL - MIC's are valuated successfully in RR
Please let me know if any other details required to resolve the error.
Regards,
Udaya Kumar

Hi,
Thanks for your response.
Characteristics and MICs are properly assigned for both Target and Origin Inspection lot materials, only thing is MICs are not in same order in both the inspection plans.. is this the reason for the error message.
Regards,
Udaya Kumar

Similar Messages

Copy result recording

Dear gurus,
when ever i am doing copy result recording ( Eg 04 to 89 ), Long text from 04 is not copied to 89 lot
i dont know why it is happening pls guide me ( qualitative ).
Regards,
s.sakthivel
Edited by: sakthivel subramanian on Feb 16, 2009 8:01 AM

Hi,
Refer below Article by Mr. Shyamal Joshi on Copy Inspection Lot.
- [Article|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60221c69-0f8b-2b10-eebf-bec51a601dd6]
Also refer below threads on the same topic.
- [Copy Inspection Lot 1|Copying inspection results from one lot to another]
- [Copy Inspection Lot 2|Re: PROCEDURE FOR COPY INSPECTION RESULTS FROM ONE LOT TO ANOTHER]
- [Copy Inspection Lot 3|copy inspection result]
Regards,
Dhaval

Result Recording Error

Dear Gurus,
I am geting the following ERROR
Value can't be interp. as floating-point number or longer than 22 charac.
Message no. BF020
I have maintain an MICs in the systam as BlankDie,and asigned in the Inspection Plan as my client wants to enter the die size in the Result-Recording.
But when i enter the die size for example: 60/33
I get above error.
Regards
Ram

Ram
Correct me if I am wrong
You always want to enter something like that 60/30 (means your die size or fixed like 60/30 , 29/15 like that)
If your MIC is Quantitative - then SAP will allow to enter either 60 or 30 and it will not allow you to enter 60/30 or 60by30 because these are all consider as Alphanumeric this is not allowed for MIC's.
for this you need to create catalogs1 and code group and codes
Create MIC as Qualitative and select catalog in QS21.
In Qe51N you can select your predifined codes (means your die sizes like 60/30) if you feel 500 - 600 die sizes it is very difficult to select.then ask your business is't it realy neccesarry for single material inspeciton they want to all size or depends material it may wary. if it is vary better to create more MIC based on that you can split catalog code group and code.
otherwise As i said create one code group and code.
or if possible if 1 is equal to 30/60 and 2 equal to 70/50 -- something like that is ok then you can use quantitative MIC --- but I don't think your client will accept this?
this is the only solution
Try this and let me know if you have problem
Thanks
Sami
Edited by: sami sami on Mar 7, 2009 6:43 PM

SAP QM QE01 - Result Recording issue - scope not fixed

Hi QM experts!
I am facing the issue with the QE01 tcode, while result recordning. My caracteristic has a "scope not fixed" indicator marked. I have the sampling prcedure n=1. While result record the system doesnt allow me to regitster more then 1 result. The "Sigle result" dropdown is blurred, not letting me enterring more then one result.
With the sampling procedure n=2 I am able to multiple the results as much I want.
I am not sure if there is any OSS Note for that problem, once I searched and haven´t came across any.
Anyone familiar with that problem?
I apreciate any hint,
best regards,
Anna

Hi Karen,
yes, my caracteristics are checked for "single results" record.
What I meant by N=1, N=2 is the size of my sampling procedure. While using samling procedure of size fixed=1, I can not regiser more then one result, even though caracteristic is marked as "scope not fixed / single results.
And when I use the sample procedure size Fixed=2 (QDV1) for the same caracterisic I am able to register 2 results / 4 /6..etc. as many I as intend to.
What am tryin to figure out here, why the system doesnt let me register more then one result in the first senario, seems like a bug to me.
thank you for your valuable input. Any suggestions?

Results Recording and defect class

Dear Gurus
While doing the results recording defect class is coming automatically when the value recorded, is greater or less than the upper limit or the lower limit , as well as the valuation tick or cross according to the values recorded is coming properly but where is the setting so that we can choose our own defect class to appear while doing the RR
Regards
Sandip Sarkar

The defect that is used is determined by the characteristic. In the control indicators there is an indicator to record defects. If this is set on for the characteristic, than defects will be recorded anytime the valuation type being used for the characteristic determines that the valuation is reject. In the characteristic, under catalogs, you define the defect catalog to be used and if you are using automatic defects recording, you also define here the specific code to used when the characteristic is rejected.
I hope that all makes sense.
FF

SAP NetWeaver Visual Composer Storyboard Error Problems

Hi all,
currently i new in Business Intelligence area..
when i try to create new model in Visual Composer. i just popup this error message
"Login Error
com.sap.ds.core.project.Project.deleteResour(Ljava/lang/String;)V"
after that when i try to delete the previous created new model, and it popup this error message.
"Failed to delete MyModels/12.mdl. Model is locked by Administrator."
wonder anyone got encounter this problem and can solve it

Hi
See this statement
Failed to delete MyModels/12.mdl. Model is locked by Administrator
When someone else opens this model, or accidentally you have opened this in any of your window this could be locked.
You can check with your administrator who is using this
Regards
N Ganesh

Results recording copying from another lot

Hi,
Is it possible to copy results recorded from one inspection lot to a newly created inspection lot.
Please let me know about any possible options.
Thx
Viny

Hi Viny,
Refer the link.
[Thread - 1|copy inspection result;
[Thread - 2|Copying the values of inspection result from one inspection lot to another;
Regards,
Shyamal

SAP QM Result recording - Copy inspection results functionality

Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
Manohar

Hello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle

Error in "Run Java migration toolkit", doing a SAP system copy.

Hi all,
Migration to new hardware with system copy, get an error in CI installation on "Run Java Migration Toolkit".
From the sapinst.log:
ERROR 2009-05-13 12:46:47.188
FJS-00003 TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
ERROR 2009-05-13 12:46:48.318
FCO-00011 The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
From the sapinst_dev.log:
ERROR 2009-05-13 12:46:47.188 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: ci.getInstanceDir() has no properties (in script NW_Doublestack_CI|ind|ind|ind|ind, line 120276: ???)
TRACE 2009-05-13 12:46:48.038 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 23620
ERROR 2009-05-13 12:46:48.318 [sixxcstepexecute.cpp:951]
FCO-00011 The step InitPrivateContext with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|InitPrivateContext was executed with status ERROR .
TRACE 2009-05-13 12:46:48.368 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > High-Availability System > Based on AS ABAP and AS Java > Central Instance . You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/HA/AS/CI. </body></html>
TRACE 2009-05-13 12:46:48.368 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
I had checked the INSTANCE_NAME parameter, in every profile, and is ok.
I tried a new instalation, after importing the profiles, and checking the INSTANCE_NAME, but got the same error.
Please, advice.
Thanks in advance.
Best Regards.
Jorge

Thanks Manoj for your advice.
We had already checked the procedures, we are working based on the System Copy Guide: "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP+Java".
I had to mention that source and target systems are HP-UX, 11.23, Itanium and the DataBase is Oracle 10.2.02.
The copy was made from a Central System (ABAP + Java) to a High-Availability System (ABAP + Java), and the problem appeared when copying the Central Instance.
Thanks in adavance.
Regards.
Jorge

Error in operation level result recording

Hi,
I need held; result recording of inspection type =03 (operation level Quality inspection)
A product manufacture via three operations (10, 20, 30)
All operation quality inspection active let operation no-10, all products reject and confirm as rework.
Next operation level quality record is done but confirmation not allow Reason is operation -10, rework quantity, (Actual quantity is more than planned quantity)
How to add the quantity after reworks for next operation quality inspection?
Pl helps me finding the solution.

Hi,
As per your more clearence , As per Example production order Quanity =1, passes 3 operation10,20,30
Operation=10 require rework as per quality ,
Operation =20 system raise the error message = Operation =10 rework .
If want to operation =10 ok Quantity =1 then system raise error messges =Actual quanity more than planned Quanitity
( 1 Rework + 1 Ok ) .
Supose rework order create and confirm then next 20 & 30 operation how complete .
Real scenerio :- Rework on operation =10 then again Quality check then goes to 20 operation Quality check pass / Rework if rework then again quality pass then goes to next operation level
I hope under stand my problem
Need help- please

Can anyone help me?Time Machine couldn't complete the backup to... An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. What is the problem? I've made no changes.

I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently. I've made no major changes. I've ran a diagnosis on my back up drive with no problems. The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message. I can see the shared drive in Finder. The light on the drive blinks while it starts the back up. I can see the shared folders on the networked drive. The backup process starts but for some reason it just stops. Can anyone help?

You can't repair a network volume in Disk Utility.
Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.)

QM-Calibration Procedure -Error during Result Recording

Dear Sir,
During mapping of Calibration Process in SAP,I am getting error ( status check error ) for Result recording of Inspection lot (QM-Calibration).I have follow all the required steps,I am not getting reason of error,Please Advice.
Thanks

Dear
Maintain in sampling procedure radio button palnt maintainance. then check if ur using inspection plan with inspection point.
else make sampling management radio button on..
regards
SANIL

Error while Result Recording-QM

Dear friends,
While RR for inspection lot I faced this error.
Characteristic results cannot be recorded for inspection lot 06000000764
Message no. QE181
Diagnosis
You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported.
Procedure
Confirm defects for this inspection lot or select another inspection lot in which you can confirm the characteristic results.

Dear Vipul,
Check the System Status, it will be CRTD.
Now select the material and click on Inspection Lot button.
In this window , click on the Inspection Specification tab.
Now click on the Task List / Spec. button.
If this button now appears fainted after clicking then it is ok, then click on the Sample button , here click on the Smpl. button and this button will shown in fainted look. Now click on the Save button. It will bring you on the main screen of QA32 , now click on the Refresh button , you will notice its Status will change.
If clicked on Task List / Spec. button and it shows an error message that No Inspection Plan Exists , then you will have to make an inspection plan using T-Code QP01. After making the Inspection Plan then follow the above steps.
Hope this solves your problem.

Error during result recording in QE71

Hi Gurus,
I am using inspection point (copy of 150) in my inpection plan. When i am trying to save my result recording in QE71 system giving below error message.
Insp. Lot Oper Charac. no Sample Message text MsgType Message ID Msg.No.
80000000196 0010 10 2 You must enter a text for the characteristic result E QE 462 C60
Though i have maintained the resuts.
Please help to resolve this issue.
Regards
Sandip

You need check the inspection characteristic's control indicator.
Transaction QP03 (display inspection plan)
If you set 'Docu. required' in control indicator of inspection characteristic, additional text must always be entered to document the inspection results during results recording for this characteristic.
Try to change the indicator to 'No documentation' then there will be no more that message in transaction QE71.
Regards
Luke

Error while doing calibration (result recording)

Hi friends,
while doing inspection lot processing, when i do the result recording it is giving the error : selected set not assigned to inspection points.
when i checked the setting in spro as:
QM-- Quality Planning -- Inspection Planning - General - Define Identifier for Inspection Points
300: Inspectio of Equipments
Default for valuation inspection point
Plant : 1000 Selected Set: 18 (created as an selected set )
now the system is giving the following error:
Entry 1000 3 18 does not exist in QAPM (Check entry)
Gurus please suggest me where i am doing wrong. is there any other setting which i need to check.
waiting for you prompt answer.
Pankaj

i solved the problem
thanx

SAP QM: Copy Results recording error - Problem class medium

Similar Messages

Maybe you are looking for