SAP QM Inprocess Inspection for a specific Process order type

Dear All,
There is a requirement. As no QM type is maintained for FG material in a plant. Now the requirement is there is a specific order type for which Inprocess Inspection  is to be activated for all the FG materials. But at the same tie for all other order types there won't be any inspection for the same set of FG material.
I tried creation Z03 by copying  03 inspection type. But the problem is source inspection is from Production. So Z03 is not confined to only the specific process order but instead it is generating inspection lot for other Process order also.
Is it possible to create a scenario where we can attach inprocess inspection to a specific order type only.
Regards,
Rahul

Hi,
You can assign the in process inspection to Order type in SPRO as shown below in the process order type dependent parameters in Planning tab in COR4.
Check and revert..
Thanks
Kumar

Similar Messages

  • Ugent: How to restrict a Material Type for a Specific Process Order Type

    Hi All
    Can any one please tell me how to restrict material type for specific process order type
    We have Process Order type ZPBS for finished materials but while creating process order
    if i give the material of semi finished material type the system let me create the process order
    it should not as we have a separate process order type for semi finished materials that is ZPBS.
    And vice versa
    Please help me how to restrict these material types for specific Process Order Types.
    Points ll be awarded accordingly
    Bilal Athar

    Hy Ghulam Mohammad,
    Good Morning,
    Pls go through below link
    [http://www.sap-img.com/abap/what-is-user-exits.htm]
    [http://www.sap-basis-abap.com/sapab013.htm]
    Now regarding How to place your checks in User Exit, then pls explain your requirements to your Abaper , so that he or she can write it into programeble language.
    Regards,
    Dhaval

  • Inspection type 04 should not generate Insp.lot for specific Process orders

    Hi Guyes,
    I Want to skip the Inspection lots generation for specific process orders of a particular material during Goods Reciept and stock should be directly posting in to Un-restricted stock.
    In the material master assigned with Inspection type 04.
    Please advise me the possible options to map this scenario.
    regads,
    Rao

    In  QDR1
    stage 10-click on insp stage
    stage 10
    no. of insp : 5
    new insp stage : 20
    rej : 1
    new insp stage : 10
    stage 20 - tick on skip
    stage 20
    no. of skip : say "5"
    new insp stage : 10
    rej : 1
    new insp stage : 10
    Now use this DMR in Header of inspection plan of material of process order.
    what this will do is after 5 inspections it will skip the next 5 inspection lots.
    Make sure :
    You can maintain setting for "maximum skip duration in plant level.
    In QM view click on Skip & auto UD
    Create variant in QA16 & run through QA17
    Here in QA17 maintain the duration after which you want to take UD
    Also make sure that in selected set maintain stock posting proposal for unrestricted.

  • In inprocess inspection lets say the production order qty is 20. i would want only 1 no. to be inspected while inprocess inspection is configured. kindly guide. Regards,Mathew

    In inprocess inspection lets say the production order qty is 20. i would want only 1 no. out of the 20 to be inspected while inprocess inspection is configured. kindly guide.
    Thanks in Advance
    Regards,
    Mat

    Hi Mathew,
    Create sampling procedure with fixed sample and give sample size = 1. Assign this sampling procedure for the characteristics of the in-process materials in Routing/Master Recipe etc. For sample size calculation at-least one characteristic should be required characteristic for the Material.
    Thanks&Regards,
    kumar

  • Inspection Lot number on Process Order

    Hi Experts,
    There's an Inspection Lot field in process order in Assignment Tab, but it doesnt reflect the number of the Inspection Lot of the Material.  What am i missing?
    Thanks,
    Kumar

    hi kumar
    that inspection lot no is assigned to process order when you have maintained inspection type 03 ie inprocess check in material master . when you release process order you can see inspection lot is generated and that inpsection lot no you can on that field.
    Regards
    Pravin

  • How can I reserve stock for a specific sales order?

    We would like to reserve stock for a specific sales order X which must be delivered next month. I have created a reservation (trx. MB21) for sales order X (movement type 231). MD04 list shows the reservation and decreases ATP stock. Stock is blocked for allocation to other sales orders. So far, it works as required. But: I cannot deliver sales order X either! It is possible to post GI for the reservation but there is no link to sales order X. It is still not possible to deliver sales order X. I thought entering the sales order number in the reservation would link the reservation to the sales order but appearently it is not.
    Does anyone know if it is possible to use reservations for reserving stock for sales orders? If yes, how does it work?
    If not, is there a way to reserve stock for future issue of a specific sales order or for a specific customer?
    Regards,
    Mariët
    PS We confirm all sales orders. Stock allocation / ATP-check only takes place at delivery creation.
    Edited by: Mariet on Jul 11, 2008 2:35 PM

    Hi Csaba,
    Thanks for your reply. We are not going to work in MTO environment because we do not make/purchase to order... I will explain our process/requirement in detail:
    Normaly a customer orders our products and we deliver from stock. Sometimes a customer calls and informs us that he needs an extraordinary large amount of the product next month. Customer tells us that it is very important that the full quantity is available that date. For us it is no problem to purchase that amount of products in time but we must avoid other customers to take away the stock. Since we confirm all sales orders and do not allocate stock to sales orders, I am looking for a solution to 'reserve' that amount of stock for that specific customer to be available at that specific date (next month).
    I tried to use reservations but then I need a sales order number, so that's why I created a sales order with delivery date next month. I created a reservation (movement type 231, sales order number X + sales order item number). Unfortunately the stock can still be assigned to other customers/sales orders... (I was expecting that only sales order X could use this reserved stock...).
    Do you know if reservations can be used for this purpose? I do not need a sales order (I only created it because I need to enter a sales order + item in the reservation), if there is a way to reserve quantity for a specific customer this would be a good solution for us as well.
    Thanks in advance for your advise.
    Regards,
    Mariet

  • Tolerance limit for Components in Process Order

    Dear Friends,
    As we can provide underdelivery / overdelivery tolerance for GR of process order, likewise is it possible to provide tolerance for BOM components in process order?
    The requirement is like that confirmation should be allowed with GI done within + / - 5 % of BOM qty in process order. Is it possible to cater this requirement with any exit / BAdi?
    Kindly help with your valuable inputs.
    Thanks in advance.
    Regards,
    Tejas

    Dear,
    Thanks for your prompt reply. Actually I have been already working on this exit only.But me & my technical fellow are stuck up for build logic for tolerance limit. It is working to restrict confirmation till GI has been done. But we are unable to give provision of tolerance limit for GI with this exit.
    Can you pls share more details about writing logic for it?
    Regards,
    Tejas

  • Can we obtain Inspection lots against a Process Order / Production Order

    Can we obtain Inspection lots against a Process Order / Production Order  on time basis i.e hourly or day wise against the same order

    HI
    i think there is no this option.Like Plant maintenance ther is no scheduling tool.
    or you have to go with stability studies...
    -ashok

  • How to find for a specific sales order trip is created or not?

    Hi,
    I need to find out that a trip is created or not for a specific sales order. Its urgent. Please let me know.
    If you can provide join for the query.
    Thanks

    Hi Suhani,
    Header level click on Action->Additional Information Select Deliveries Tab drag to last you can see Current Trip Details over there.
    Line level is possible to check --Action->Additional Information   Select Deliveries Tab, drag to last, you can see Current Trip Details over there.
    Thanks
    Edited by: 21221 on Feb 26, 2013 5:27 PM

  • 02 STO 's for a single process order

    Hi All,
    Can anyone explain me whether there any problem in getting two STO's for a single process order?
    If its a problem how to generate only one STO for a one process order?

    Hi Mallika,
    can you explain your sceanrio . i am not able to understand your requirement.....
    Regards,
    Venkat.

  • How to find Missing Parts for a particular Process Order?

    Hi,
    How to find Missing Parts  for a particular Process Order ?
    Is there any function module or Table ??
    Thnx in Advance.

    Hi prince roy
    you can use the T-code = <b>CO24 - Missing Parts Info System</b>
    if helpful PLEASE REWARD YOUR POINTS
    thanks
    chakri

  • Internal Batch Number for specific Production Order Type

    HI PP Guru
    We need to activate Internal Batch Numbers to a specific Production Order type.
    We need this at order confirmation level. i.e. (CO11/CO12)
    Is it possible? HOW ?
    Please let me know customizing Steps.
    If this is not possible then, Batch number should be internally assgisned at Order release stage. Please let me know customizaing steps for this even.
    Thks.

    hi Siva
    Thk for suggestion
    However, if we do not wish to activate Internal Batch Assigment and want to remain on manual BUT still we want system should not allow duplicate BATCH NUMBER, then, is there any way to achive this.
    This is because, once we manually enter batch in confirmation (CO11), we further break the material in to several part and we need to understand original batch number. For this we just take the original batch number and add further serial number like below
    Orinigal Confirmation Batch Number - 100001
    Batch Split of 10 - 10000101,10000102,..............10000110.
    So, what we want is system should check that same batch number is exist or not in confirmation. Is it possible or how it can be handle.
    thk in adv.
    SK

  • Transaction for characteristics per plant / order type

    Transaction for characteristics per plant / order type
    We need a new transaction for customizing feature
    Characteristics per plant and order type
    ZVP_PRNTCHARCON
    example one screen - one dimension characteristics, other 15 operations
    Thanks

    Hi Tarun,
    Standard SAP does not support char specific to plant & order type. You need to devlop some custom transaction. If you are looking more details, request you to share the business requiremnet, details etc.
    Thanks...Sanjay

  • Movement type specific to Order Type

    HI
    I have created new movement type Z01 instead of 101 and I want to use this Z01 for specific order type and for Others system should take into account standard 101 movement.
    I have checked movement type setting in PP but it client level setting and is applicable to all order types if i change it.
    Please let me know if its possible.
    Regards,
    Anand

    Anand,
    GR Movement types are specific to package area(PP, PP-PI, REM etc..), so it is not possible to have it defined for specific order type within a package.
    What I mean is that you can have GR for PP(Production orders) as 131 and for PP-PI(Process orders) as 101 but within PP you cannot have diffferent movement types defined.
    Regards,
    Prasobh

  • Production version selection based on Process order type

    Hi,
    I have the following requirement.
    A material is having two production version one is for R&D and one is for regular production. Now two process order types one for R&D and one for regular production. Now during creation of process order if we use order type of R&D then it has to select production version of R&D and if we use order type of regular productionthen it has to select production version of regular production. This selection has to be happened automatically. How this can be configured.
    Thanks
    Vinamrath.

    Dear Kumar,
    Assuming the production version selection is automatic in  the order type dependent parameters,then during order creation this
    can be automated only through validity date of the production version or else by locking the production version manually which
    should not get picked or else only through different Lot Size.
    Check and revert.
    Regards
    Mangalraj.S

Maybe you are looking for