SAP QM - Message QE405 is not appearing in QE51N

Hi guys,
Im working in hte area QM in SAP (ECC 6.0) and I need to know where one can configure the following funcionality:
In trx QE51N one is entering results for an inspection lot.
If the caracteristic shows values lets say between 2 - 10 and one enters 11, a warning message should appear saying that "the value one has entered is too big, check again " (tipo de mensaje QE405)
I checked that in Inspection lot Class 05 this message is appearing but in class 03 (produccion) it is not.
I also found out that the message appears in one Plant (1111)But in another plant it does not appear (1156). For class 03!
Can anyone help me in this one?
Maybe there is ABAP involved?
Thank you
Aart

In the recipe of the material (C203), the inspection caracteristics had the following values:
Range: 2-10
Plausible limits 0 - 100
The message appears if the value of the result entered (QE51N) is outside the plausible limit range.
Cheers,
Aart

Similar Messages

I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear.

I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear. The old Macbook Pro I was using used Snow Leopard. Now with the new it is a Lion. Toruble now when I click onto new message window I have the spinning icon which show it is trying to load. However it fails and Im left with having to Force Quit it. How can I resolve this problem

Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

Message keyboard does not appear

Hi all,
The keyboard on my Message app does not appear. I've tried messaging different contacts, but there's nothing. Any suggestions?

Perform a reset: Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.

Error message in SBO_SP_TransactionNotification not appear

Hi,
I have validation for @object_type = '30' in SBO_SP_TransactionNotification.
When user runs journal entry transaction, the error message appears.
But when user want to posting journal through journal voucher, it is true the transaction not posted but the error message does not appear.
I already tried a simple test for journal voucher with @object_type = '28', and I saw the error message did not appear but the data was not saved.
Is anyone know how to handle it ?
Thank in adv.

What is your B1 version and PL? As long as the records are not saved, it means the SP is working. You just need to twist your logic to see any error messages could be showed. If no way to show, that might be application error.
Thanks,
Gordon

Unable to login: SAP System Message: Dynpro does not exist

Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      79
M sid        Q60
M systemid   324 (IBM iSeries with OS400)
M relno      7000
M patchlevel 0
M patchno    172
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c   1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected               = TRUE
C con_hdl                 = 0
C db_handle               = 1
C dbhost                  = USALSAPU
C rdbname                 =
C dblib                   = R3Q60DATA
C r3sysle_changed         = TRUE
C query_compl_reval       = O
C dbconnecttype           = L
C user                    = Q6079
C qaqqinilib              = Default (QUSRSYS)
C dbjobname               = WP00
C dbjobuser               = Q6079
C dbjobno                 = 197762
C rmtexelib               = KRNQ60700
C parallel_alter_tables   = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = Q60
C     Character encoding          = UNICODE
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = USALSAPU
C     dbhost                      = USALSAPU
C     rdbname                     =
C     dbname                      = Q60USALSAPU
C     dblib                       = R3Q60DATA
C     application server          = DVEBMGS79
C     Connect type                = LOCAL
C     pid                         = 6396
C     wpjobname                   = WP00
C     wpjobuser                   = Q6079
C     wpjobno                     = 197762
C     DB2/400 vers. appl. server = PASE 1
C     DB2/400 vers. DB server     = V6R1
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = OFF
C     allow_cancel                = Try (Unspecified)
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     nte_list_size               = 10
C     dbsl_alternate_package      = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA          (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA          (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM               (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM          (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array)   (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area)    (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array)   (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area)    (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array)   (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area)    (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array)   (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area)    (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL       started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP      started with length 35840000   bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF      started with length 80000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM   (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA   (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA        started with length 40000k     bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR   (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B   max_blocking_factor = 20, max_in_blocking_factor      = 40,
B   min_blocking_factor = 10, min_in_blocking_factor      = 10,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   1, prefer_in_itab_opt          =   1,
B   convert AVG         =   1, alias table FUPD            =   1,
B   escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B   select *            =0x00, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.172.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [17]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62379446
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c    8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62382527
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c    8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c    8185]
A RFC 1729 CONVID 62392457
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c    8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER     /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c   1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [             0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST                                .
A Source SAPMSYST                                 Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380                                .
A Source                                          Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478

Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Why are certain Gmail messages and conversations not appearing in Firefox 4 (I get the left sidebar, top bar, but message fails to appear), but functions fine in all other browsers?

Certain messages in Gmail are not displaying properly (http://img607.imageshack.us/i/screenshot20110228at101.png/). These messages appear properly in all other browsers (including previous versions of Firefox), and also appear when I disable all labs. Disabling Right Side Chat labs appears to enable display of the message, but destroys all formatting (page stretches to the right beyond viewable resolutions, line breaks disappear), and so on.

Thank you for your prompt email.
I have thoroughly checked and double-checked all the factors below.
On two different computers. Unfortunately, nothing has helped yet.
I can assure you that each item listed below has been checked several times during all my searching today and ALSO again right now.
There are no problems with Plugins, Themes or Extensions found. No permissions blocked, No media blocked images, No third-party permissions blocked. No images blocked from any domains. And images are 'Enabled'. There are no exceptions in place to the loading images. No exclusions in my security software settings.
AND I have checked all of this on a second computer that is also having this same problem. That person is using a different security software than I am but they are having the same problem with images in only their Gmail account also - but NOT when using IE9. Only when signing in through Firefox. And we both think it started yesterday or this morning.
That pc is still on Firefox version 12.0. I updated earlier today to version 13.0 but the problem is still ongoing for both of us.
Any further help will be greatly appreciated.
I have to get something accomplished. WAY behind now.
Thank you,
ElaineB.

SAP MMC-message sever is not being started.

Hi all,
In my personal laptop,I have installed SAP/4.6.Earlier it was working fine but now it is not working at all.Actually my system got affected by virus and onwards whenever I try to start application sever and database server,for few seconds it turns into GREEN and again turns into YELLOW.Really I am very poor in SAP Basis side so whatever i am getting,i am explaining.I tried to find out the technical reason behind this then found for few seconds message sever started after that it is being stop.So please help me out because I don't want to format my system.If you need more details like scrshot of error,error # then please let me know.
Regards
Ashish K

Hi
First you need to start the DB always then SAP. Hope you are following the same.
Check for log files in work dir. Stop SAP & restart it again. Check which log file it is updating. Paste the error message which is mentioned in the log files (dev_disp, dev_ms,dev_W* log file)
Thanks,
Sushil
Edited by: Sushil Suryawanshi on May 7, 2009 4:14 PM
Edited by: Sushil Suryawanshi on May 7, 2009 4:15 PM
Edited by: Sushil Suryawanshi on May 7, 2009 4:17 PM

Crystal Reports Alert message pop-up not appearing in InfoView/BO Mobile?

Hi,
I am testing conditional alerts of a crystal report in BOBJ Mobile application. The application is supposed to show a pop-up for the alerts whenever the condition set inside the report document is met, with the creation of any instance in InfoView (the document is scheduled.)
The application is not showing up any alert pop-up.
Moreover, InfoView itself does not seem to show any pop-up alert message (the way Crystal Reports client is showing up in design env) for that particular instance of the report. The alert details are, though, only displayed in the 'instance details' option in InfoView. No pop-up on opening of that particular instance, and also on refreshing that report itself. May be InfoView is designed to manage alerts that way..
How the way should I create my alerts in crystal report as to make them appear as pop-ups in InfoView on instance opening/report refresh. And then, in turn, in my BOBJ Mobile application.
Thanks in advance if anyone can tell some way out for the requirement. This is very imp to us.
Nirmit

Hi Don,
The reason for me to post this thread in Crystal Reports was to get information on how the way the alerts needs to be configured in Crystal Reports as to make a pop-up for them to appear while viewing the instance of the report from InfoView or refreshing the report itself in InfoView.

Why do spaces appear in Japanese sentences in received messages which do not appear in writing them? Could anyone tell me how to prevent this occurrence?

Here is an example. Can you see spaces inserted which I have not put in writing?
ああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああああ

I see the problem, but I have no idea really. Except to say if it appears in this forum it is a core issue as it affects both Thunderbird and Firefox.
Perhaps you should try a Japanese forum http://forums.mozillazine.jp/viewforum.php?f=3
At least they will be familiar with the language and hopefully the oddities of formatting in it.

Why can't i chat on whats app, while receiving message it does not appear.

When I try to open message on whatsapp , it does not open and it goes back to main window.
Please guide me.
Jaspal

Howdy Rianasabya7,
It sounds like your app is quitting or minimizing unexpectedly when you try to use it. I would recommend the troubleshooting in the following article, named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Start with these steps, and if needed continue with the "Reinstall the App" section and work your way down from there:
Follow the steps below and test the app after each step.
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Thank you for using Apple Support Communities.
Take care,
Sterling

XFCE popup message in panel not appearing

after upgrade to last XFCE release i seem to be unable to see the popup messages from items on panel such as Network monitor.
I hover with mouse cursor over it but nothing appears.
Anyone had similar happening?

this has already been discussed on the xfce mailing lists: http://foo-projects.org/pipermail/xfce4 … 26461.html
If you find somewhere a patch to fix this please tell me and file a bug in our bugtracker.

TS4002 unread exchange email messages that do not appear on device

Inbox shows unread messages, but the messages are not displayed in the inbox.

If it's an exchange account, that has nothing to do with iCloud or your iCloud email account. You may need to delete, then re-create the exchange account on your device. You may also want to try to force closing the mail app (from the home screen, double-tap the home button, locate Mail in the list at the bottom, tap and hold it until it wiggles, tap to close it, tap the home button again).

Custom Messages Long Text not appearing

Hi Everybody!
We are having a problem displaying the long text of custom messages.
After we click on the "More Information" link beside the message short text, we should get a pop-up message with the long text.
Instead, we get a pop-up message showing an internet explorer 400 error.
We are OK displaying long text of standard messages. Should we do something extra to display long text of custom messages?
Thanks
Gabriel

Hi Atul,
Regarding the long-text option, yes, I have marked: The "Self-Explanatory" checkbox is not checked.
Here is the source code!
** VARIABLES **
DATA: t_partner          TYPE TABLE OF bbp_pds_partner,
        x_partner          TYPE bbp_pds_partner,
        u_vendor_set       TYPE TABLE OF bbp_vendor_getlist_s,
        x_vendor_set       TYPE bbp_vendor_getlist_s,
        w_xfeld            TYPE xfeld,
        e_message          TYPE bbp_smessages_badi,
        w_guid_crmt_object TYPE crmt_object_guid,
        w_guid_bbp_guid    TYPE bbp_guid,
        w_partner_no       TYPE bu_partner_guid,
        w_nombre           TYPE bdl_logfun,
        w_process          TYPE bbp_proc_type,
        w_status           TYPE xfeld,
        w_header           TYPE bbp_pds_po_header_d.
    CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
      EXPORTING
        i_guid          = iv_doc_guid
        i_with_itemdata = 'X'
      IMPORTING
        e_header        = w_header
      TABLES
        e_partner       = t_partner.
    IF iv_cv_updated_active_doc = space.
      w_guid_bbp_guid   = iv_doc_guid.
      w_guid_crmt_object = w_guid_bbp_guid .
      LOOP AT t_partner INTO x_partner WHERE partner_fct = '00000019'.
        w_partner_no = x_partner-partner_no.
*     This function check if the partner is valid.
        CALL FUNCTION 'Z_BC_BLOQ_GET'
          EXPORTING
            iv_bu_partner_guid = w_partner_no
          IMPORTING
            ev_xfeld           = w_xfeld.
        IF w_xfeld IS NOT INITIAL.
* Get the name of the vendor.
          CALL FUNCTION 'BBP_VENDOR_GETINFO'
            EXPORTING
              partner_guid       = w_partner_no
              x_with_name        = 'X'
              x_show_inv_parties = 'X'
              purch_pd_org_type = 'O'
            TABLES
              vendor_set         = u_vendor_set.
          READ TABLE u_vendor_set INTO x_vendor_set INDEX 1.
          CLEAR e_message.
          e_message-msgty   = 'A'.
          e_message-msgid   = 'ZSRM_ERRORES'.
          e_message-msgno   = '005'.
          e_message-msgv1   = x_vendor_set-partner.
          e_message-msgv2   = x_vendor_set-vendor_name.
          e_message-msgv3   = x_vendor_set-vendor_no.
          APPEND e_message TO et_messages.
        ENDIF.
        CLEAR x_partner.
      ENDLOOP.
ENDIF.
ENDMETHOD.

Roles In SAP Web AS ABAP would not appear automatically in J2EE Engine

I have an ABAP+Java Addin Instance Installed.
When I create a user, it shows up in the Jave Engine when I goto Services->Security Provider.
But the ABAP roles would not show up in the Java Engine.
Please advise..

HI,
It depends on the UME chosen,
You need to ensure your ume config allows groups to be created. check the xml you have chosen,
also permission for sapjsf.
Cheers,
Chetan

Message popup not appearing

I created a dll that had a message popup (userint.h) using Cvi version 6 on Windows XP, then using the Cvi runtime module and everything was good. I am now using Windows 7 (32 bit) and the latest Cvi runtime module and the dll partly works, does not give any errors, but the message popup does not appear.
My guess is the new Cvi runtime module maybe does not support the older message popup, but really dont know, could be the Windows version; anyone know about this?

Hi,
I don't believe MessagePopup has changed since CVI 3.0 as stated here: http://zone.ni.com/reference/en-XX/help/370051V-01/cvi/uiref/cvimessagepopup/
I would recommend stripping it down to the barebones and see if you can get it functioning that way.

SAP QM - Message QE405 is not appearing in QE51N

Similar Messages

Maybe you are looking for