SAP QM MM overview
hi Gurus,
Actually i am learning SAP QM Module module and i maintain
Creation Material - QM view
Creation of Quality Information Record
Change of Quality Information Record
Create Inspection Method
Create Master Inspection Characteristic
Creating Sampling Schemes
Creating Sampling Procedure
Creating Dynamic Modification Rules
Creating Inspection Plans
Creating Manual Inspection Lots
Record Usage Decision
After creating the above config when i raise the PO and good reicept it will done normal as general Good reciept , actually i didnt have a concept in my mind what the thing are reflected when Raising a PO and GR
Please suggest what the senarios are coming in PO and good reciept for QM side , if i make any mistake please tell
Thanks and Regards
Maashish
Hi,
when you are creating GR system will generate Inspection lot in background as per info ginen in material master if it is not generating Inspection lot then in material master quality info. is not been maintained.
to enable the material master for quality management, follow the procedure as..
1. MM02, enter your material code, from selection view screen select quality management screen.
in quality management screen , in procurement data screen activate the QM proc. active indicator, enter the QM control ket like 0001, then click the Insp. setup button.... In Insp. setup data screen, click create button--> enter Insp. type 01 & activate active indication and dont do any things othere, come out from this screen and save the material master.
2. Create the Inpection plan using QP01 for task list & Operation.
3. create GR.
system will generate Inpection lots now.
now you have to take the action as per subsequent transaction....try to refers sap help mat. help.sap.com
hope it helps...
manoj singh
Similar Messages
-
Hello All,
Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
Link:
TM Overview + End to End Process Flow - YouTube
Thanks and best regards,
NavinVery Good Demo Navin
-
BI Portal - were can i modify com.sap.ip.bi.Overview ?
Hello All,
I do portal projects, but this time Iu2019m doing BI for the first time.
In the Business Intelligence role (not BI Admin role), wehn opened, the first you see is an Overview iView.
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.Overview
With HR portals (ESS-MSS), you can modify this in the back-end, customizing.
But how and were can I modify this iView (page). In the portal (front-end) itself, or in the back-end, if so, where in the back end?
thanks in advanced,
GlennWhat do you want to modify in this iView ?
you can find this iview by searching it in your repository :
search criteria : object : iview
name : com.sap.ip.bi.Overview
clic all the 3 boxes and clic on search.
Fabien. -
I need to know, How can i obtain a list from the SAP's Data Dictionary? I need the database tables and his fields specification.
Thank you.
Jesus AlenHi,
Here is the code sample to see the table and its field.If you double click the table name,then you can go to SE11 and see the field descriptions from the program itself.Kindly reward points if it is useful.
TABLES: DD02L,
DD02T,
DD03L,
DD04T.
DATA: BEGIN OF ITAB_TABLES OCCURS 0,
TABNAME LIKE DD02L-TABNAME,
END OF ITAB_TABLES.
DATA: FILEOPENCANCELLED.
SELECTION-SCREEN: COMMENT 1(80) TEXT-001, SKIP 1,
COMMENT 1(80) TEXT-002, SKIP 1.
PARAMETER: TBLNAME LIKE DD02L-TABNAME.
IF TBLNAME IS INITIAL.
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = 'tablenames.txt'
IMPORTING
CANCEL = FILEOPENCANCELLED
TABLES
DATA_TAB = ITAB_TABLES.
IF NOT FILEOPENCANCELLED IS INITIAL.
EXIT.
ENDIF.
ELSE.
CLEAR ITAB_TABLES. REFRESH ITAB_TABLES.
ITAB_TABLES-TABNAME = TBLNAME.
APPEND ITAB_TABLES.
ENDIF.
SORT ITAB_TABLES.
DELETE ADJACENT DUPLICATES FROM ITAB_TABLES.
TRANSLATE ITAB_TABLES-TABNAME TO UPPER CASE.
SELECT TABNAME DDTEXT FROM DD02T
INTO CORRESPONDING FIELDS OF DD02T
FOR ALL ENTRIES IN ITAB_TABLES
WHERE TABNAME = ITAB_TABLES-TABNAME AND
DDLANGUAGE = 'E'.
FORMAT COLOR COL_KEY.
WRITE: / 'N ' AS SYMBOL,
DD02T-TABNAME RIGHT-JUSTIFIED, '-', DD02T-DDTEXT,
'? ' AS SYMBOL.
HIDE DD02T-TABNAME.
FORMAT COLOR OFF.
SELECT FIELDNAME ROLLNAME DATATYPE LENG DOMNAME FROM DD03L
INTO CORRESPONDING FIELDS OF DD03L
WHERE TABNAME = DD02T-TABNAME.
SELECT DDTEXT FROM DD04T
INTO CORRESPONDING FIELDS OF DD04T
WHERE ROLLNAME = DD03L-ROLLNAME AND
DDLANGUAGE = 'E'.
WRITE: /
DD03L-FIELDNAME, DD03L-ROLLNAME,
DD03L-DATATYPE, DD03L-LENG NO-ZERO,
DD03L-DOMNAME, (35) DD04T-DDTEXT.
ENDSELECT.
ENDSELECT.
ULINE.
ENDSELECT.
CLEAR DD02T-TABNAME.
AT LINE-SELECTION.
IF NOT DD02T-TABNAME IS INITIAL.
call function 'RS_DD_DEF_SHOW'
EXPORTING
OBJNAME = DD02T-TABNAME.
ENDIF.
CLEAR DD02T-TABNAME. -
SAP CRM 010 overview 4.0 version.
Dear Friends,
I will be very grateful if someone could send me the pdf file of SAP CRM 010 overveiw of version 4.0 to my mail id which is
[email protected]
Thanks in advance.
Regards
KrisHi Kris,
Please find the useful link http://www.sap.com/solutions/business-suite/crm/pdf/BWP_mySAP_CRM_Solution_Overview.pdf
reagards,
Muralidhar Prasad chatna -
Hi,
I need to make the SAP Portal presentation overview for customers who will use it but i am looking for copy screen or any powerpoint presentation on this topic.
Can somebody help me to find these information?
Feel free to contact me,
ThansThese r excellent websites which contain both ppt & pdf presentations about SAP Portal overview:
EP Introduction
http://en.wikipedia.org/wiki/Enterprise_information_portal
EP Introduction
http://www.sappoint.com/PHPWebUI/index.php5?menu=ConsultingEnterprisePortals&title=Consulting%20Services%20and%20Solutions%20-%20Enterprise%20Portals
All Articles on SAP NetWeaver Portal
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/10f7a71d-d911-2a10-39b0-8a9f318c94ac?startindex=21
SAP NetWeaver Portal How-to Guides for SAP NetWeaver 2004
Portal How-to Guides for SAP NetWeaver 2004?prtmode=print
SAP NetWeaver Portal eLearning Catalog
https://www.sdn.sap.com/irj/sdn/portal-elearning
AN EXCELLENT BOOK ON DETAILS OF SAP ENTERPRISE PORTAL
http://searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
Get ready for SAP ENTERPRISE PORTAL
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d5ca54c-0601-0010-56a0-812227d24327
SAP ENTERPRISE PORTAL - PORTAL CONTENT
http://www.sap.com/platform/netweaver/pdf/BWP_Portal_Content.pdf
Beginning EP Development
Beginning EP Development
PORTAL(SAP LIBRARY)
http://help.sap.com/saphelp_nw04/helpdata/en/a4/76bd3b57743b09e10000000a11402f/content.htm
HOW TO PERFORM INITIAL SIZING OF ENTERPRISE PORTAL 6.0
http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/01_Sizing_EP_60_init2.pdf
SAP NetWeaver Portal eLearning Catalog
https://webservice.sdn.sap.com/irj/sdn/portal-elearning
SETTING UP U'R SAP ENTERPRISE PORTAL SYSTEM LANDSCAPE
http://www.sappro.com/downloads/SystemDefinitions04.pdf
Integration into the SAP Enterprise Portal
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
Administration Guide
http://help.sap.com/saphelp_nw70/helpdata/en/ec/171e3e7181b60ae10000000a114084/frameset.htm
Themes and Permissions
http://help.sap.com/saphelp_nw70/helpdata/en/26/3df46c0584cd4eb31e91aa7bcf1893/frameset.htm
Installing and configuring the preview edition of EP
Installing and configuring the preview edition of EP
TRANSPORTING SAP NETWEAVER PORTAL CONTENT
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/ep%206.0%20sp2.0/best%20practice%20for%20transporting%20sap%20netweaver%20portal%20content.pdf
SAP NetWeaver Portal How-to Guides for SAP NetWeaver 2004
Portal How-to Guides for SAP NetWeaver 2004
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/ep%206.0%20sp2.0/sap%20ep%206.0%20integration%20using%20jsr168%20and%20wsrp.ppt#285,1,Slide 1
CITRIX SOLUTIONS FOR SAP ENTERPRISE PORTAL
http://www.citrix.com/site/resources/dynamic/partnerDocs/Citrix%20-%20SAP%20Business%20White%20Paper.pdf
HOW TO INTEROPERATE SAP ENTERPRISE PORTAL AND IBM WEBSPHERE PORTAL SERVER
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4a3addc4-0501-0010-bfbb-9cdd29581adf
installation
Enterprise Portal 6.0 Installation
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N02_BB_InstallGuide_EN_US.doc
Installing SAP Enterprise Portal 6.0 SP2
http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/02_Introduction_v1_final.pdf
How to migrate from SAP Enterprise Portal 6.0 SP2 to SAP Netweaver '04
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/778ac2ee-0901-0010-61a9-a2e174996bd7
Get ready for SAP Enterprise Portal 6.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d5ca54c-0601-0010-56a0-812227d24327
Mastering SAP Enterprise Portal 6.0 Application Development
http://www.sap-hefte.de/download/dateien/1000/075_leseprobe.pdf
Get u'r SAP Enterprise Portal 6.0 smooth start
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/48f4aa4c-0601-0010-4fb3-abc9042dac4b
cheers!
gyanaraj
****Pls reward points if u find this helpful -
SAP B1 Drag & Relate causes DMP Error
SBO Version: 8.82 PL09
Forum,
We have noticed for windows 7 / windows 8.1 machines that when we come to use the 'Drag & Relate' facility, it is causing those SAP clients to crash with the following error:
I have found on this forum a thread which indicates this may be a bug, fixed in 8.82 PL10. Is anyone able to provide me with the SAP Note number?
Thanks,
SarahHi,
Please attach found thread here to check. Also check SAP note:
1755387 - Overview Note for SAP Business One 8.82 PL09
Thanks & Regards,
Nagarajan -
How to change columns in PO overview screen
In standard SAP in PO Overview screen the first column will be Status and second will be Item, however in our system it is changed and the first column is short text and second is qty and then followed by status column.
How can i interchange it back to normal.Just Select The Total Column, then Drag & Drop accordingly..
whereever you want..
Alternatively you can do by
in the top right corner of the item overview you have a button for table control (above the vertical scroll bar).
If you click that button, you get a pop-up from where you can customize the layout.
Press the blue info button there and read how this is to be done. -
How to maintain QR Code & BAR Code in SAP Script and Smart Form ?
I want to place QR code (Quick Response Code) and Bar Code In my invoice . I searched from many resources but i couldn't get any appropriate answer . So , Please help me to solve this problem.
Hello,
SAP Note 1557674 - "Overview of bar code printing from SAP" shows the 5 possibilities how barcodes can be printed from SAPScripts and SmartForms.
In your case the following possiblities can help:
DIMM/SIMM module: in this solution you need to additionally purchase and install a DIMM/SIMM module to your printer. Then you can send the command sequence from the SAPScript/SmartForm to this module, and the barcode will be printed. (The command sequence should be described in the manual book of the module.)
barcode.dll file: in this solution you need to additionally purchase and install a barcode.dll file, which will handle the barcodes. Please note: this solution only works with SAPWIN Device Types (and therefore only on Windows OS). The command sequence should be also described in the manual.
New bar code technology: in this case R/3 creates the barcode itself, and the barcode will be forwarded as a simple image to the printer. Unfortunately QR code can not be created with this solution - according to SAP Note 1557674 the following barcodes can be created:
Code39, Code93, Interleaved 2of5, Code128, PDF417.
(There are 2 further solutions in the mentioned Note, but the "bar code font" solution can not be used for 2D barcodes like QR code, and the "PDF-based form" solution means that SAPScript and SmartForm can not be used).
Alternatively, here is a document which explains how QR codes can be displayed in SmartForms with alternative solutions:
How to create a QR code and show it in a Smartform
Regards,
Laszlo -
Where can I get tutorials/Pdf for SAP Insurance ?
I want to learn SAP Insurance .Where can I get tutorials/Pdf for SAP Insurance ?
Thanks
Ravi TejaYou must go thru this material: This is SAP authorized material.
FS300 - SAP for Insurance - Overview
FS310 - SAP Collections and Disbursements Overview - Insurance Industry
FS315 - SAP Collections and Disbursements Customizing - Insurance Industry
FS316 - SAP Insurance - Collections & Disbursements Overview & Customizing
FS320 - Incentive & Commission Management
FS330 - SAP Insurance - Claims Management Overview
FS335 - SAP Claims Management-Customizing
FS340 - SAP Policy management overview
FS345 - SAP Policy management implementation scenarios
SAP Help: http://help.sap.com/insurance
Regards
Giri -
Hi,
I hope I've selected the right forum for posting a few queries on SAP Market place
Please help me with the below:
Presently, we have an S-User id that is being used by 2 people. Is there any settings or possibility to get / send an email / SMS intimation to both the users every time an OSS message is raised? Alternatively, if another S-user under the same customer ID raises an OSS message, can an email intimation be sent to the Super user?
(At present, I believe an email intimation is being sent once we get a reply from SAP)
RegardsI'm afraid this space focuses on supporting SCN members and their interactions in the community.
There is this document SAP Service Marketplace Overview and FAQ that also contains links to where you can get support for SAP Service Marketplace. -
Help on PO13 ---- "SAP Organizational Object" in the table control.
Hi All,
Can some one tell me details on or where to read from ..... PO13 -> "SAP Organizational Object" in the table control.
For eg if you go to PO13 -
> "Relationships" in the table control you get all the hierarchy details of an employee (eg: reports to, belongs to, holder ...etc.).
Similarly what would you get when u go to PO13 -
> "SAP Organizational Object" -
> Overview in the table control. Is it something to do with product hierarchy ..... am not very sure. I am working on a sandbox on a trial workflow for learning purpose and I do not have it configured so that I can look for some samples.
I understand I am not very clear about my question, but still I hope if someone can answer.
Thanks,
Anu.An object type is a generic description of an object.
The object type definition determines the object type by specifying its various components.
An object type is defined by its
Basic data, such as name, created by...
Key fields, which give each object a unique ID
Attributes as the characteristics of an object
Methods with parameters and exceptions as activities that can be performed for an object
Events, which describe any changes that occur
Implementation in the program code
After assigning Object Type, you should click on Assign Key.. and assign respectuve Object ID.
This will create link between Object in HR-OM with Object of other modules like Sales, Vendor, Purchase etc.
Note sure, how this is used in Workflow... i never worked on workflows.
Regards
...SAdhu -
About future for SAP XI?
Hi Experts,
Im new to SAP.
Im an MCA fresher and im planning to go for SAP XI training with my friend's suggestion.
Just i wanted to know the openings for XI and Future for XI.
Can i start my career as XI fresher?
what are the basic requirements i should have if i go for XI training?
Kindly do needful.
regards,
Arvind.Hi Arvind Subramaniam ,
>>Can i start my career as XI fresher?
Yes. It is a good Netweaver technology & u can either try as a developer or at Admin side. But there r good oppurtinities as a XI Developer.
>>what are the basic requirements i should have if i go for XI training?
XI is configuration type & maximum stuff wil be mapping . But , sometimes there arises a need to import JAVA code into XI. Hence if u know JAVA/J2EE it's a added advantage.
All the best for u'r success in future!
These r some excellent websites on basics of XI which familarizes u with XI:
SAP Exchange Infrastructure 3.0 Integrating Heterogeneous Systems with Ease
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1ebea490-0201-0010-faad-a32dd753d009
SAP NetWeaver Technology Overview
http://www.gi-ev.de/regionalgruppen/aachen/vortraege/abstract/04/21-04.pdf
SAP NetWeaver Visual Composer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sdn-meets-labs-walldorf-05/sap%20netweaver%20visual%20composer%20in%202005.pdf
SAP Exchange Infrastructure for Developers ( This is an excellent website for free pdf book for XI)
http://www.sap-press.de/download/dateien/1191/sappress_exchange_infrastructure.pdf
Exchange Infrastructure : XI Transaction Codes
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xiTransactionCodes&
A Beginner's Guide to SAP XI Settings part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
A Beginner's Guide to SAP XI Settings part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
SAP XI AND SLD
http://www.sappro.com/downloads/nov06/XIandSLD.pdf
Exchange Infrastructure Learning Map
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/learning+map&
SAP Exchange Infrastructure eLearning Catalog(U wil get all downloads regarding XI starting from basics to end)
https://www.sdn.sap.com/irj/sdn/xi-elearning
All Articles on SAP NetWeaver Exchange Infrastructure(This website gives al articles on XI)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f04b44aa-fe06-2a10-859e-82ad4965781d?startindex=101 [original link is broken]
Mastering SAP Netweaver XI - Programming( PDF Book for XI)
http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
SAP XI Learning Guide
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1008087,00.html
SAP Exchange Infrastructure 2.0
http://www.sun.com/third-party/global/sap/collateral/SunSAPWP_final.pdf
http://help.sap.com/bp_bpmv130/Documentation/Planning/TechnicalInfrasture.pdf
Process Integration with SAP Netweaver new features and functions
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4042611d-04e5-2910-bd9d-f97627b1c164
SAP NetWeaver Process Integration 7.1 Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
End To End Process Integration Features in SP15 and higher incl. SAP NetWeaver 2004s
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/54f20a2e-0801-0010-f787-87653d356508
cheers!
gyanaraj
****Pls reward points if u find this helpful -
Suggestion on Good Books for SAP NetWeaver Administrator
Hi,
I am very new to SAP NetWeaver. Can any one please suggest some good books to learn SAP NetWeaver Administration. Is SAP NetWeaver For Dummies is good book to start with?
I want to understand the SAP NetWeaver Architecture and also want to learn from SAP Basis administration/Consultant point of view. So which book can help?
Also I got to kmow, SAP NetWeaver includes the following components and tools:
Components:
SAP Auto-ID Infrastructure
SAP Business Intelligence
SAP Enterprise Portal
SAP Exchange Infrastructure
SAP Master Data Management
SAP Mobile Infrastructure
SAP Web Application Server
Tools
SAP Composite Application Framework
SAP NetWeaver Developer Studio
SAP Solution Manager
So from SAP Basis Consultant point of view, which Componet one should learn or focus on?
Appreciate help.
Thanks
Regards,
BasisCK.Hi Nitin,
Thanks for the reply. SAP R/3 Handbook, Third Edition - By Jose Antonio Hernandez, Franklin Martinez, James Keogh
~
Table of contents
Chapter 1: SAP: From SAP R/3 to SAP NetWeaver
Chapter 2: The Architecture of the SAP Web Application Server
Chapter 3: SAP NetWeaver: An Overview
Chapter 4: Using SAP Systems
Chapter 5: Upgrading to SAP R/3 Enterprise: The First Step into SAP NetWeaver
Chapter 6: The Change and Transport System
Chapter 7: Development Options with SAP Solutions: ABAP Engine
Chapter 8: User Management and Security in SAP Environments
Chapter 9: Web Application Server System Management
Chapter 10: Performance and Troubleshooting with SAP Solutions
Chapter 11: SAP for IT Managers: Implementation, Planning, Operation, and Support of SAP Systems
INDEX
~
Is this book completely talk about SAP NetWeaver or it's kind of transition/bridge from SAP R/3 to SAP netweaver?
Since you are experienced in Netweaver technology, can you suggest the step by step approach to be master in this?
I mean read this book first, then what next? what component I should go for it? XI, EP??
Appreciate your help and inputs.
God bless u.
Thx
Regards.
Basis CK. -
Send message to SAP inbox - change message CREATOR
Hi,
I'm sending a message to a user's SAP inbox using function module SO_OBJECT_SEND. By default, the message creator is set to sy-uname. I need to change this to a generic user e.g. 'SYSTEMUSER'. This is not the same as the SENDER/Author/Owner. I managed to change the sender by setting the parameter ORIGINATOR.
I referred to other forums but couldn't find any references to changing the creator. I tried passing the username via parameters SENDER and OWNER - in the Sap Inbox "document overview" the Author is set to SYSTEMUSER but the document creator in "document contents" still reflects my name.
Example code:
ALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
OBJECT_HD_CHANGE = w_object_hd_change
OBJECT_TYPE = 'HTM'
SENDER = 'SYSTEMUSER'
OWNER = 'SYSTEMUSER'
ORIGINATOR = 'SYSTEMUSER'
ORIGINATOR_TYPE = 'B'
TABLES
OBJCONT = text_nom
RECEIVERS = receiver_list.
Is it at all possible to change the message creator without modifying the SAP standard code? Examples will be much appreciated.
Kind regards
Liza-MarieThanks!!
I'm creating a background job (from within the dialog program) that calls function module SO_OBJECT_SEND with the specified user. This works perfectly!
Regards
Liza-Marie
Maybe you are looking for
-
How to Construct the Email To activity in SharePoint 2013 Workflow
I have a created a custom workflow and custom association and initiation form using SharePoint 2013. My Assn. form is fine. I pass in the people picker (Active Directory group) value to my workflow just fine. Now on my Init form I use the passed in
-
Can not properly write on a Speedo Aquabeat 1Go
Hello, I just bought a speedo aquabeat MP3 player, 1Go. I plugged the usb, saw a drive "speedo mp3" and started to transfer my mp3. It went fine, and then I started to listen to them. they were "jumpy, scratchy", the player would not play some few se
-
Cannot connect Wii, TV,
Today, three of our internet-enabled devices, Wii, TV, and BD player, quit connecting to the internet. Our computers (macbooks and an iMac), iPads, and iPhones connect just fine. The iMac and the three internet enabled devices use a wired connectio
-
SSL CONNECT sessions failing 4.0.5
We upgraded from 3.6 to 4.0.5 and are seeing a lot of messages like the following: CONNECT connect://login6.smartworks.com:443, service-common reports: timed out waiting for data from client Results in a 504 error. We see this for many hosts, though
-
Enlarging a Flex DataGrid cell on RollOver
Hi, I have a DataGrid which has a column named Hyperlinks where I show useful hyperlinks for the user. Sincce typically Hyperlinks are too big to show in a DataGrid cell, I need to have the column width at max 100px to be able to fit other columns in