SAP QM Result recording - Copy inspection results functionality

Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
Manohar

Hello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle

Similar Messages

Copy Inspection Results of one lot to other lots at a time

Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,

Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out

Copy inspection results not working

Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaX

Go through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf

Copying Inspection results from inspection lot.

Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar Mokashi

Hi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM

Copy inspection results

Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.

Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM

Error during copying inspection result.

Hi All,
While recording result with the Inspection plan where I had done settings to copy inspection result from another lot I got the error message;;;;
Message Text
No active implementation exists for BAdI QEC_SELECTION, procedure
Technical Data
Message type__________     E (Error)
Message class_________     QECOPY (QM Data Transfer to an Inspection Lot)
Message number________     016
Message variable 1____     QEC_SELECTION
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________     1 (very important)
Sort criterion________
Number________________     1
Pls guide me how do I activate this BADi
Regards,
Shyamal Joshi

HI all,
I think I will not get any response over it so closing the thread to contribute in new rule of engagement.
Regards,
Shyamal

Results recording copying from another lot

Hi,
Is it possible to copy results recorded from one inspection lot to a newly created inspection lot.
Please let me know about any possible options.
Thx
Viny

Hi Viny,
Refer the link.
[Thread - 1|copy inspection result;
[Thread - 2|Copying the values of inspection result from one inspection lot to another;
Regards,
Shyamal

Reg: Copying inspection results from inspection( 04) to inspection type (!0

Dear Friends ,
I have configured for Quality certificate.
At the time of delivery , the system will create an inspection lot.
To make delivery we need to carry out RR and UD once again.
Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection type 04 .
Thanks in advance.

HI Dear,
As you said , it is for COA.
And the materials are not batch manged.
Is there any possibility of copying the results of 04 inspection lot to inspection type 10 lot , which is created at the time of PGI.
Because untill and unless RR and UD is made sales people will be not able to make the delivery . if there are multiple lots , it takes
time for them to carry out RR and UD.
Thanks for your reply!!!

Copying inspection result

Dear Experts,
In the production server copying inspection results is possible with one user ID but with another user ID it is giving error. Please let me know if there is any particular related authorization object.
Regards
Sunit

Dear what is the error description and error code or else you can check the missing authorization object by entering SU53 in error screen and check with basis guy.
Cheers
KK

Re: Difference between individual result recording or summarized result rec

Hi All,
Please explain me .
"Difference between individual result recording or summarized result recording"
Regards,
vivek

hi
individual result recording is when you measure multiple values, these can record individually and enter in thr RR.and all these values will get sum by the sytem.
summarized result recording is you need to sum the multi ple values and the one sum value has to enter in the results recording.

QM: Copying inspection results to another lot

Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
Rgds

Having seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig

Cannot Record Material Inspection Results as per wiki use case * SOLVED *

=== EDIT ===
Playing around, I solved my issue.
I did not realize that I needed to set both flags
CloseIndicatorSpecified = true;
CloseIndicator = false;
Adding that fixed it; I suspect I cannot set them to null even if the WSDL allows it.
Michel.
=== ORIGINAL POST ===
Hi,
I have a project to integrate SAP and our LIMS using the SAP web services with the Material Inspection business object.
In the Wiki, there are a few [use cases|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ESpackages/IntegrationofQualityManagementSystems] on the subject.
Following that, I successfully retrieve all the required data using the following web services:
[Find Material Inspection Basic Data by Elements|https://wiki.sdn.sap.com/wiki/display/ESpackages/FindMaterialInspectionBasicDatabyElements]
[Find Material Inspection Subset Operation by Elements|https://wiki.sdn.sap.com/wiki/display/ESpackages/FindMaterialInspectionSubsetOperationbyElements]
[Find Subset Operation Inspection Activity Basic Data by Elements|https://wiki.sdn.sap.com/wiki/display/ESpackages/FindSubsetOperationInspectionActivityBasicDatabyElements]
[Read Subset Operation Inspection Activity|https://wiki.sdn.sap.com/wiki/display/ESpackages/ReadSubsetOperationInspectionActivity]
From there, I want to record results. According to the Wiki , I should use
[Record Subset Operation Inspection Activity Result|https://wiki.sdn.sap.com/wiki/display/ESpackages/RecordSubsetOperationInspectionActivity+Result]
I tried directly through the [WS Navigator|http://sr.esworkplace.sap.com/webdynpro/dispatcher/sap.com/tcesiespwsnavui/WSNavigator] to test web services. Whenever go through that tho, I get the following error:
Conversion Error: Invalid Input Format (701 SFB)
Obviously, I get the exact same error using c# (at least I'm consistent!)
Below is the code (some is truncated because it is too long but I think you can get the idea).
The question: Can anyone help me understand why I am getting that error? Maybe there is one or more property I don't understand... It would be practical if the actual failing property was identified in the LogItem, but it is not.
Some things I tried (to no avail):
1. Tried all sort of combination for actionCode
2. Removed actionCode and set actionCodeSpecified = false
3. Removed the Measure property
4. Removed the Text property
5. Removed the ChangeStateID
Thanks in advance!
Michel
...RequestMessage_sync messageIn = new ...RequestMessage_sync();
messageIn.MaterialInspection = new u2026RequestMessage_syncMaterialInspection();
messageIn.MaterialInspection.ID = new MaterialInspectionID();
messageIn.MaterialInspection.ID.Value = "3265";
messageIn.MaterialInspection.ChangeStateID = "1";
messageIn.MaterialInspection.Subset = new u2026RequestMessage_syncMaterialInspectionSubset();
messageIn.MaterialInspection.Subset.ID = new InspectionSubsetID();
messageIn.MaterialInspection.Subset.ID.Value = "0";
messageIn.MaterialInspection.Subset.Operation = new u2026RequestMessage_syncMaterialInspectionSubsetOperation();
messageIn.MaterialInspection.Subset.Operation.ID = "0300";
u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivity activity = new u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivity();
activity.ID = "0010";
activity.CloseIndicatorSpecified = false;
activity.Result = new u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivityResult[1];
activity.Result[0] = new u2026RequestMessage_syncMaterialInspectionSubsetOperationInspectionActivityResult();
activity.Result[0].ID = "0001";
activity.Result[0].AcceptanceStatusCodeSpecified = false;
activity.Result[0].DefectNumberValueSpecified = false;
activity.Result[0].ExceptionIndicatorSpecified = false;
activity.Result[0].InspectedNumberValueSpecified = false;
activity.Result[0].Comment = string.Empty;
activity.Result[0].NonConformingUnitNumberValue = 0;
activity.Result[0].Measure = new Measure();
activity.Result[0].Measure.Value = decimal.Parse("4.15";);
activity.Result[0].Measure.unitCode = "AMP";
activity.Result[0].Text = new Text();
activity.Result[0].Text.Value = "Some Text Here";
activity.Result[0].actionCode = ActionCode.Item01 |ActionCode.Item02 | ActionCode.Item03;
activity.Result[0].actionCodeSpecified = true;
activity.CloseIndicatorSpecified = false;
messageIn.MaterialInspection.Subset.Operation.InspectionActivity = activity;
messageIn.MessageHeader = new BasicBusinessDocumentMessageHeader();
messageIn.MessageHeader.ID = new BusinessDocumentMessageID();
messageIn.MessageHeader.ID.Value = "starlims_update";
try
      u2026ConfirmationMessage_sync messageOut = ws.MaterialInspectionSubsetOperationInspectionActivityResultRecordingRequestConfirmation_In(messageIn);
      if (messageOut.Log.Item != null)
            string message = String.Empty;
            foreach (LogItem item in messageOut.Log.Item)
                  message += (item.Note + "\n");
            MessageBox.Show(message);
catch (Exception ex)
      MessageBox.Show(ex.Message);
Edited by: Michel Roberge on Jul 16, 2008 2:38 PM

See post for solution.

Copy inspection results procedure

Dear Gurus,
I have a scenario that my process order delivers co- product with the main product for which I need to copy the results of the main product.
I have made the settings in SPRO, but I don't know what is the next step, where should I go to copy the results.
Regards,
MaX

Do you want to copy results of one co product lot to final product lot.
Then as you said you have done the customization(like manual or automatic select ),only thing that mainly remains is go the Quant data of the char/mic & select copy results from the previous inspection lot.
Also check the PDF
http://www.scribd.com/doc/29417809/SAP-QM-Copy-Results

Result recording inprocess inspection for production order!

Hi,
I have a scenario in for prod order in process inspection.
I have an operation to machine the shaft for 3 hrs. And every hour I need to take an reading and note down in the inspection. For the same reason I created master data of MIC Quantitative, Sampling procedure with sample size 1
On routing for the same material, Usage 1 and status 4 Released for general, Inspection point 200 and sapmle drawing procedure with fixed qty 3.
Generated a prod order and released, got inspection lot for lot origin 03. But when I try to enter 3 different readings per hour could not able to achieve this.
Kindly help me out.
Regards,
N. Nagaraju

Are u using physical samples? If not, I wouldn't use the sample drawing procedure.
Set your characteristic to individual results recording in your control indicators. Set the sampling procedure to be a fixed sample size of three.
You should be able enter three results then for the characteristic.
FF

Result Recording of Inspection Characterstics.

Hi Gurus,
Actually we have one scenario in QA in which for one material there are certain specification whose result we will come to know few days later after posting inspection lot in Unrestricted & also after doing UD.
I want to know how to do result recording for that perticular specification after we already did the UD for that lot?
Is it possible after UD?
Is there any additional customization setting nedded?
Thanks in advance.

Hi,
You can do this .
Those MIC for which you want to take result after UD .In control indicator of MIC put long term inspection check box on .
So that even after UD of inspection lot , result record for that MIC will remain open for you to take result.
Regards
SANIL
Edited by: Sanil Vadke on Jun 29, 2010 8:53 AM

SAP QM Result recording - Copy inspection results functionality

Similar Messages

Maybe you are looking for