SAP Query in ECC 6 Upgradation

Hi All ,
I am working in an ECC 6 Upgradation project , upgrading from 4.6 C to ECC 6.
Somebody told me , Query cann't be coppied from 4.6 C to ECC 6.
Is it true ? If so what is the alternative ?
Thanks in advance.
Regards
Srikanta

Hi Srikanta,
U didnt need to re-copy all the queries. When you upgrade from 4.6, the new version of sap does not default to the correct query area. You merely need to point it to the correct one. Just set a parameter against you own user data called AQW and leave the parameter value blank.
Take a look at OOS note 672784.
You can transport queries between systems in SQ02 (by using the lorry button) or run report RSAQR3TR.
You download the infosets, queries etc into a file and load them into whichever system you wish.
Hope it will be useful.
Regards,
Lakshman.

Similar Messages

SAP Query missing in upgraded server

Hi All,
Our client has upgraded from SAP R/3 4.6c to ECC 6.0.
After the upgrade, in the new upgraded server some of the programs are missing. But they exist in the old version(4.6c)
The following are programs are missing in upgraded system:
1) AQA0NUCLEAR_OPS=TASKS_BY_DATE=
2) AQA0NUCLEAR_OPS=TASKS_BY_FLOC=
3) AQA0NUCLEAR_OPS=TASKS_BY_BUILD
4) AQA0NUCLEAR_OPS=TASKS_BY_CODE=
5) AQA0ZFI=========ZFIDOC3=======
I hope they are standard programs(Generated from an SAP/ABAP Query)as they do not start with Y or Z
I would like to know why they are missing in upgraded system and whether they are auto generated programs (Generated by a SAP Query etc)
IF any related notes are available to restore back on the upgraded system let me know
Regards
Shiva

Hi
These are all Query related programs.
they are not captured in Transport requests
and they are user and client dependent also.
No other way
they have to be developed/generated in ECC6.0 separately.
this is the drawback with the query/s
Reward points if useful
Regards
Anji

Need knowledge on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

please give me some ideas and useful links on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

Hi Jaya,
Not very clear with your question.
Are you looking for changes in areas od ABAP reports & SAP query when we upgrade SAP from 4.7 to ECC 6.0 ??
If the response is YES, then please refer to SAP solution browser www.sapsolutionbrowser.com
Define source release and target release .
You will get module wise details on new features for target release.
Hope this helps.
Regards,
Deepak Kori

SAP ECC Upgrade : Userexit or Related Enhancement been Overwriten

Hi All,
Is that anyone get explanation from SAP why during ECC upgrade most of the enhancement been overwritten and need to re-do.
Thank in advance on your knowledge sharing.
Trevor Wong.

Ok. There might be need to do "adjustmens" in case of upgrade conflict, or just simple confirmations of code enhancements in transactions SPAU + SPAU_ENH.
I think you should find all missing code enhancements there, waiting for adjustment.

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

SAP Query not generated after upgrade

Hi All,
Our client has upgraded from 4.6c to ECC 6.0
In the upgraded server some SAP Queries have not been generatedand others have generated. I wanted to know why all are not generated.
I also wanted to know if any table name exists which maintains query with generated program name
Please let me know your learnings on SAP Query if any
Thanks in advance

These generated program names are stored in AQLDB for local area and AQGDB for global area. Usually these program names will include the infoset names and the query names.

SAP HR ECC upgrade

Hi,
Could someone tell me what will be the role of SAP HR abap developer in SAP ECC upgrade.
Specially Payroll programming.
and after the upgrade is done what kind of development support is required.
Many thanks
Swetha

Hi Swetha,
ABAPer needs to check all of the user exits and BADIs implemented before in order to check whether any changes need to be done.
Additionally, if there had been any repairs in the system, these need to be reimplemented after upgrade.
For further reference please check the following links:
Re: what are abaper tasks during upgrade to ECC 6.0?
http://www.sapdev.co.uk/upgrade/ug_tasks.htm
Regards,
Dilek

SAP ECC upgrade from EHP6 to EHP7

Is GTS upgrade from NW 7.2 to GTS 7.3 to be mandated as ECC is getting upgraded from ECC 6.0 EHP6 to EHP 7 . Why?

Hi John,
Your statement looks a bit misaligned.. There is no GTS 7.3 version, the SAP Netweaver 7.3* application server on which SLL_LEG GTS component sits.
The underlying Netweaver AS versions between ECC and GTS systems can be different BUT what needs to be the same is the GTS plugin component in ECC and GTS components in GTS system itself, as best practice they should also be on the same support pack level.
If the ECC upgrade from ehp6 to ehp7 requires you to upgrade SLL_PI gts plugin component in ECC, then in this case you should upgrade SLL_LEG component in GTS system to the same version.
I personaly dont think its required, but check Service markeplace for, PAM Product-availability-matrix and other ehp 7 requirements..
Hope this helps,
Branio

Error when executing a query in ECC

W'e're getting the following error when attempting to run a Crystal Report (2008) that uses an SAP ECC query as the datasource:
Database Connector Error: "Screen output without connection to user"
Anyone seen this before? Tried looking this up in the forum but didn't find anything.
Thanks.

Are you up to date on the Crystal ECC transports?
Is the user running the Crystal Reported assigned to the SAP query user group (SQ03/02)?
I have seen strange errors with these two things.
Why not upgrade to CR 2011? We found with our license there was no addiitional fee/cost to do this.
Tammy

Sap query not working after Upgradtion

Hi Experts,
We have recently done up gradation from 4.6 to Ecc 6.0. Since then my Sap query are not working.
Please help how to fix the issue.
Thanks in Advance for your support and time.

Hi,
Do you have any custom indexes for tables in the affected queries that were deleted as part of the upgrade? (ones that didn't exist in the customer namespace? - something working looking into)
Regards,
Ryan Crosby

Missing output format radio button in SAP Query

Hi SAP Gurus
We have SAP Query which as created in 4,6c. After the upgrade to ECC 6.0 We found that the output format radio button is mising in SAP Query. We are unable to choose teh output format. How can we have the radio button back?
Appreciate yr help
Rgds..Sanjay

Dear Sanjay
Refer OSS Notes 723577 and 132813, may be this notes helpfull.

ABAP Webdynpro Rendering issues after ECC Upgrade

Dear All,
We recently upgraded ECC to EHP 7 (Netweaver 7.4) but our Portal is still at Netweaver 7.0 EHP2 SP16.
The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.
2. The cursor in the Input fields reset back to the first position while typing and create a big mess.
Any help appreciated.
Thank you.
PK

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

Creating Datasource and Extracting from SAP R/3 ECC 6.0

Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KK

You can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps!

PKUNRE field not getting populated in 2LIS_13_VDITM after ECC upgrade

Hi,
We are seeing blank values for PKUNRE / 0BILLTOPARTY during extraction from 2LIS_13_VDITM.
We are experiencing this issue after ECC upgrade which went live recently.
We have applied note 580694 to correct missing fields in the billing extractor.
This field is sourced from VBPA/VBRP.
Our functional teams confirmed that VBPA/VBRP are updated properly and there seems to be no timing issue.
However, the record is landing in PSA with blank BILLTOPARTY.
Where could the problem be?
Is there any thing we missed?
Can any one throw some light if you have experienced this kind of an issue after upgrade.
Thanks a ton in advance,
Sandy.

Hi Sandy:
In my system I didn't find the Field PKUNRE on the VBPA / VBRP Tables, so my guess is that you're dealing with a Custom Enhancement, if this is the case the SAP Note 576886 - "Change to user-defined fields not extracted" might help you in solving this issue.
Regards,
Francisco Milán.
***Follow up note:
I double checked and found the Field PKUNRE on the Extract Structure for 2LIS_13_VDITM (using Transaction Code LBWE) so now I know that you're working with a Standard field and not with a custom ehnancement, the SAP Notes below address a similar issue to yours but they are related to Applications 11 and 12, not for App 13. I apologize for the confusion.
Note 621684 - "Fields PKUNRE and PKUNRG are not filled from delivery"
Note 379237 - "BW Content LE-SHP: missing partners in 2LIS_12_VCITM"
Edited by: Francisco Milan on Jan 28, 2011 12:54 PM

SAP Query in ECC 6 Upgradation

Similar Messages

Maybe you are looking for