SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Similar Messages

  • Check box in SAP Query selection screen

    I want to keep 2 check box in SAP Query selection screen.
    could you please tell me any one.
    regards,
    kumar

    Hi Vijay,
    If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
    You can find the name of the generated program of the query when you execute the query.
    Reward points if useful.
    Regards,
    Atish

  • ABAP Webdynpro Rendering issues after ECC Upgrade

    Dear All,
    We recently upgraded ECC to EHP 7 (Netweaver 7.4)  but our Portal is still at Netweaver 7.0 EHP2 SP16.
    The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
    1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.  
    2. The cursor in the  Input fields reset back to the first position while typing and create a big mess.
    Any help appreciated.
    Thank you.
    PK

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • Call screen in SAP Query selection screen (SQ01)

    Hi experts , in sq01 selection screen my requirement is: for one field  when the user call F4 the small screen should be appear and when they fill
    those 3 fields I should concatenate them and send it as a single field to query for process , the important thing is those 3 fields should be in '
    one line beside each other , is there a way like call screen or ... in  sq01 for this issue ??
    the screen that should be appear is something like this

    Hi,
    I dont think that ALV double click can be handles via SAP query. One possibility is that you can modify the report program that SAP generates for the query. Change the program to handle the double click evet on the ALV grid and call transaction ME23n using the PO number on the line selected.
    Regards
    Ajith

  • Infoset Query Selection Screen Issue

    Dearf Experts,
    I am a SAP-PM functional area. (Do know very little about technical sideof SAP)
    I am working on SQ03/SQ02/SQ01 for the first time to create an Infoset query.
    The output screen is incontrol and showing all the fields as per my specifications.
    My problem is the Selection Screen. This is displaying to many things not desired by me.
    1. Two tabs (I do not expect any tabs)
    2. Many Screen areas, repeating the fields (1000,0100,0101,0102,0103) 
    The screen area of my specified fields in at the bottom.
    My expectations about the selection screen is - just like simple one as in the case of SQVI.
    Please help me in getting through this problem.
    Regards
    Jogeswara Rao

    Gungor Ozcelebi,
    Thank you very much for responding,
    Exactly as you said, I am using Notifications logical database.
    (I was suspecting this reason)
    Infact I found about 8 fields (Perhaps related to Date fields, checkboxes etc) are automatically selected from the LDB.
    My trials to delete them were invain. They reappear while saving.
    I would be very thankful, if you help me in this case.
    Regards...

  • PKUNRE field not getting populated in 2LIS_13_VDITM after ECC upgrade

    Hi,
    We are seeing blank values for PKUNRE / 0BILLTOPARTY during extraction from 2LIS_13_VDITM.
    We are experiencing this issue after ECC upgrade which went live recently.
    We have applied note 580694  to correct missing fields in the billing extractor.
    This field is sourced from VBPA/VBRP.
    Our functional teams confirmed that VBPA/VBRP are updated properly and there seems to be no timing issue.
    However, the record is landing in PSA with blank BILLTOPARTY.
    Where could the problem be?
    Is there any thing we missed?
    Can any one throw some light if you have experienced this kind of an issue after upgrade.
    Thanks a ton in advance,
    Sandy.

    Hi Sandy:
        In my system I didn't find the Field PKUNRE on the VBPA / VBRP Tables, so my guess is that you're dealing with a Custom Enhancement, if this is the case the SAP Note 576886 - "Change to user-defined fields not extracted" might help you in solving this issue.
    Regards,
    Francisco Milán.
    ***Follow up note:
    I double checked and found the Field PKUNRE on the Extract Structure for 2LIS_13_VDITM (using Transaction Code LBWE) so now I know that you're working with a Standard field and not with a custom ehnancement, the SAP Notes below address a similar issue to yours but they are related to Applications 11 and 12, not for App 13. I apologize for the confusion.
    Note 621684 - "Fields PKUNRE and PKUNRG are not filled from delivery"
    Note 379237 - "BW Content LE-SHP: missing partners in 2LIS_12_VCITM"
    Edited by: Francisco Milan on Jan 28, 2011 12:54 PM

  • F4 search-help in infoset query selection-screen fields

    Hi all,
    I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
    How can I do this?
    I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
    Can you help me? I never done this before, so I really don't have a guess.
    Thanks in advance.
    Beste regards,
    Sónia Gonçalves

    Hi all,
    I have found thread  that helped me a lot in this issue.
    I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
    Isn't it possible to include it in the "Report-specific selctions"?
    Thanks in advance.
    Best regards,
    Sónia Gonçalves

  • SO_OBJECT_SEND does not work after ECC upgrade

    Hi Gurus,
    I find a problem after ECC upgrade with SO_OBJECT_SEND.
    This was used in a zprog and was wroking fine in 4.6 C.
    When this prog is executed it sends mails to the users thru SOST/SCOT.
    But in ECC , upon execution I did not see the mails in SOST.
    The prog passes the User id (  type B) to the receivers table.The mail
    is sent to Business workplace but not to SOST/SCOT.
    Pls help gurus.

    Hi,
    Use type U instead of type B.
    Type of RECEIVER entry.
    The following values are permitted:
    'B' : SAP user name
    ' ' : SAPoffice name
    'C' : Shared distribution list
    'F' : Fax number
    'U' : Internet address
    'R ' : Remote SAP name
    'X' : X.400 address
    Regards
    Indu

  • BEx query selection screen takes long time to popup

    Hi,
    I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
    The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
    I have run the statistics of the query and according to the statistics report the query takes a  lot of time for the following component :
    OLAP: Query Gen.     2681,312682
    I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
    I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
    What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
    Please advise how to proceed.
    Thanks in advance,
    Arash

    Hi,
    Please check the following notes which should be useful.
    1387593 - Performance optimization for query change/generation
    1416737 - Performance optimization for query change/generation(2)
    1396485 - Performance optimization for query check/save
    Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
    1472915, 1506560) and repair/correct the different tables to optmize
    the query definition tables.
    Regards,
    Amit

  • Selection screen display after role menu selection

    Hi,
    I have strange situation:
    - running a query on the WEB from Query Designer 3.5 first display a selection screen and then the data - what is OK or expected
    - but we created an application in WAD with just role menu - if we pick the same query, from the same role - the query is displayed without selection screen. After that the variable screen can be displayed, but we needed before the query is actually displayed (some variable are filled with user exit on selection screen, ...)
    Any idea?
    Thanks,
    Tomaz

    Tomaz,
    Have you checked the webtemplate properties in WAD where you can check - force selection screen display?
    Bob

  • Customer exit is not functioning after ECC upgrade/support package

    It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
    COZF0002 Change purchase req. for externally procured component
    EXIT_SAPLCOZF_002
    INCLUDE ZXCOZU02
    *&  Include           ZXCOZU02
    CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban>   TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
      IF ( caufvd_imp-auart = 'ZM05' ).
        SELECT SINGLE fkstl INTO l_fkstl FROM prps
          WHERE pspnr = caufvd_imp-pspel.
        IF ( sy-subrc = 0 ).
          WRITE l_fkstl TO <fs_eban>-zzfistl.
        ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
      ELSE.
        WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
      ENDIF.
    ENDIF.

    Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
    *& Include ZXCOZU02
    CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban> TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
    IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
    WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
    WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
    ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
    ENDIF.
    ENDIF.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Is it possible to rearrange the order of SAP STD Selection Screen?

    Hi.
    Is it possible to rearrange the order of SAP STD Selection Screen?
    Example:
    IW69 has Location data selection at bottom of screen. 
    Is it possible to move that to top of the selection screen?
    We are on ECC6.0.
    Thank you,
    Brett.

    Hello Brett
    You may try to use GuiXT:
    [Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
    Regards
      Uwe

  • Query Selection screen field validatoin

    I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
    How can this be achieved ?
    I tried looking for exits but did not find a relevant one.
    Thanks in advance.

    Hello,
    You need to write a routine in SMOD for selection screen validations.
    It will come in i_step = 3. please refer foll code as example:
    The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
    DATA:  LI_VAR like rrrangeexit,
           wa_t_var_range like LI_VAR,
           count type i value 0.
    IF i_s_rkb1d-infocube EQ 'CUBE1' or
       i_s_rkb1d-infocube EQ 'CUBE2'.
    Check whether only one of date variable is entered in variable screen.
    IF I_STEP = 3.
        Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
          if wa_t_var_range-low > sy-datum.
            CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
              EXPORTING
                I_CLASS  = 'RSBBS'
                I_TYPE   = 'E'
                I_NUMBER = '000'
                I_MSGV1  = 'Enter date less than or equal to current date'.
            raise again.
          endif.
    ENDIF.
    ENDIF.
    Regards,
    Shashank

Maybe you are looking for