SAP query with FI-SD details

Hi all,
I need a report for open items between 2 dates (1.1.08 to 31.1.08) along with the details of billing document number and Sales order number.
Can you tell me whether any std. t code provdes these details..!?
If no, Can I create query for the same..!? what tables should I consider for this and in which order I should join them...!?
Actually, I have tried SQ01, 02 and 03 but when i executing the report, the system is given no items.
Br..........AJ
Edited by: Anil Jonnalagadda on Oct 20, 2008 8:19 AM

Hi,
Thank you very much for the reply and I regret for not replying at the earliest.
For this requirement, I used 3 tables BSID, VBAK and VBRP
BSID- for open items
VBAK- for Sales order
VBRP - for Billing Document
Even I have tried using BSID and VBAK
BSID- for open items and billing document number
VBAK- for sales order number
But both the ways, I ve got the same message " no data selected"
Can you post me document in sdn !?.  Eventhough it has been prepared in other than english, i can use google language tools and get it translated to english.  But, make sure to mention the language in which it is prepared.
Further, can you give me logic how it is useful if we use KNA1 for this report..!?
I am sorry to remind you about my requirement once again. But my intention is to give you my clear requirement only.
My requirement is a report which shows the open items between 2 dates along with information of billing document number and sales order number.
Regards,
Anil Jo.
Edited by:: Anil Jonnalagadda on Oct 21, 2008 8:51 AM
Edited by: Anil Jonnalagadda on Oct 21, 2008 9:18 AM

Similar Messages

  • How to create sap query with "or" relationship

    dear experts,
    I need a report to display the employee whoese WSR is
    changed in the month for infotype 0007.
    that is ,we want to search with selection
    begda OR endda between 2008-01-01 and 2008-01-31.
    how to create sap query with "or" relationship?

    hi use like this,
    CALL FUNCTION 'HR_READ_INFOTYPE'
      EXPORTING
        pernr                 =  p_pernr
        infty                   =  '0007'
       BEGDA                =  p_date1
       ENDDA                 = p_date2
      TABLES
        infty_tab             = itab .
    hi use this by passing the pernr to fm and giving the dates low and high in the p_date1 and p_date2.
    loop at itab where condition.
    endloop.
    may it helps u,
    regards,
    venkat.

  • SAP Query with Multiple lines

    HI Team,
    Can we create multiple lines in an SAP Query? If yes, how (pls explain the steps)?
    Like can we have a line for the employee, next for spouse & then the next for child, so on...and then the next employee details.
    Also, there might be fields which will repeat in most of these lines for each employee.
    Thanks
    RL

    Hi RL:
    HR module have PA0021 table (HR Master Record: Infotype 0021 (Family), with this table into TCODE: SQ02  is naturally obtain the result that you ask, or Do you are customizing "Z" program with ALV?
    Regards
    José Luis

  • SAP Query with Logical databse BRM

    Hi All,
    I'm developing one report by SAP Query using with logical database BRM to pick the accounting documents. But I would like add some kind of where condtion for one of field for BKPF table. Is there way to achieve this by using logical database concept? If there is a way please help me.
    Thanks in advance.
    Regards,
    TNR

    hi
    in SQVI, kindly follow the below steps:
    a.  in the left hand pane, click on the data fields.
    b.  expand the 'accounting document header'.
    c.  for the field BKPF-TCODE click on the 'List Fields' and the 'Selection fields'.
    d.  click on execute,
    e. you can now enter the values for the BKPF-TCODE.
    regards
    eashwar
    Edited by: eashwar1 on Feb 11, 2010 11:55 AM

  • SAP Query with Logical databse

    Hi All,
    I'm developing one report by SAP Query using with logical database BRM to pick the accounting documents. But I would like add some kind of where condtion for one of field for BKPF table. Is there way to achieve this by using logical database concept? If there is a way please help me.
    Thanks in advance.
    Regards,
    TNR

    hi
    in SQVI, kindly follow the below steps:
    a.  in the left hand pane, click on the data fields.
    b.  expand the 'accounting document header'.
    c.  for the field BKPF-TCODE click on the 'List Fields' and the 'Selection fields'.
    d.  click on execute,
    e. you can now enter the values for the BKPF-TCODE.
    regards
    eashwar
    Edited by: eashwar1 on Feb 11, 2010 11:55 AM

  • Access from WebI/ Universe to SAP Query with user who has analysis authenti

    Hello together,
    I try to run and build a WebI report which is build on a universe based on SAP BW query. The user has restricted access to the data provider on which the SAP query is build. This restriction is based on analysis authentification (SAP BI 7.0) if I start the SAP query in BW the user has only restricted access to the data in the data provider (on which the SAP query is build). If I start the WebI report the user has full access to the data. I checked the authentification and in my opinion there is no other authentification in SAP BW which extends the restrictions.
    Has anyone an idea why the authentification doesn't work?
    Greetings Janine

    Hey here,
    I m creaing my universe on top of Infocube or multiprovider.
    >> The recommendation path is to use BW queries with the necessary Authorization Variables leveraging your BI Authorizations.
    For eg:
    I have 2 users, User1 and User2.
    Now if I want User1 should see data for CostCentre = UK,India.
    User2 should see data for CostCentre = US, UK,India
    >> This is part of BI Authorizations in BW.
    Here are my queries:
    1) Will User1 and User2 be able to see the data level access in Webi Report based on the their Login?
    >> assuming you follow the 2 steps mentioned above (Query and authorization variables) - yes
    If Data level access cannot be achieved in Webi via universe created on top of Infocube/Multiprovider then what is the approach to do so?
    >> Data level security is part of your BI authorizations in BW.
    In a nutshell, BO alone can't do that, one has to set up at BI level.
    Hope clarified all your doubts.
    Gracias...!!

  • SAP Query with multiple list lines

    HI Team,
    Can we create multiple list lines in an SAP Query? If yes, how (pls explain the steps)?
    Example of what I am looking for:  can we have a line for the employee, next for spouse & then the next for child, so on...and then the next employee details.
    Also, there might be fields which will repeat in most of these lines for each employee.
    Ex: EE1 Pernr, PA, PSA, SAL, etc
          Dependant SSN, PA, Address, PSA, etc
          Dependant 2 SSN, PA, PSA, ettc
          EE 2 Pernr, PA, PSA, SAL, etc
    Thanks
    RL

    Hi RL,
    Just using SAP Query I don't think it is possible.
    SAP Query puts each and every DB record on a separate line.
    You need ABAP programming for this.
    Regards,
    Dilek

  • SAP Query with Code page option in background

    Hi All,
    I have a requirement.When the Japanese users run a query in foreground, they can specify the code page which they need to view the output.  When I tried to schedule the query in background as they requested, we discovered that we couldnu2019t specify the code page so I thought we would need some kind of ABAP program that could submit the query and be able to specify the code page.
    Can you please help me how to proceed with this.
    Thanks
    Sreekumar

    Hello Esperado9 Said,
    You can think about MB51 / MB5B report where you can define the selection variant and make settings as per your requirement. These both reports will serve your requirement if you are looking for material mvt documents or stock.
    Hope this helps.
    Regards
    Arif Mansuri

  • Problem in SAP Query with currency conversion   based on table TCURX

    Hi All,
    I have an infoset where tables A903 and KONP are joined . Query is displaying the KONP-KBTER values with currency as stored in the database table .My requirement is to show the KBETR value as per decimals stored in TCURX table for that currency .
    For Example If KONP-KBETR = 51.29 JPY , It sholuld display as 5129  as  Decimal places for JPY is 0.
    There is FM CURRENCY_AMOUNT_SAP_TO_DISPLAY Which gives the equvivalent display value to the databse value value.But it is giving dump because of type conflict with
    KONP-KBETR .
      Can any body help me how can i solve the problem in My Query ? .Pls any small idea taht may help greatly  also warmly welcome .
    Thx,
    Dharma .

    Hi Sriram ,
    But how can i use it in Queries . I mean should I go for a additional filed in infoset and then passing the  converted value to the the that additional field .
    Thx ,
    Dharma .

  • SAP Query with constante code mvt value

    hello,
    I wish to create several abap query since tables MKPF and MSEG for the inventory mouvements. each query for a type of inventory turnover (101, 501,…), but I should not put the code movement in criteria of selection. it is necessary that the code movement should be fixed in the query. should-I declare the MSEG-BWART as a constante? where I can do it?
    thank you for your assistance.
    cordialy Said

    Hello Esperado9 Said,
    You can think about MB51 / MB5B report where you can define the selection variant and make settings as per your requirement. These both reports will serve your requirement if you are looking for material mvt documents or stock.
    Hope this helps.
    Regards
    Arif Mansuri

  • SAP QUERY -logical data base ADA

    I have created a SAP Query with logical data base ADA,I have selected four tables in it.Do i need to link these tables if yes..where and how?The report is for fields in asset master data.
    .But i get below error when i try to genaret the output :
    Fields from parallel tables within a line
    Line: 01
    Field: Asset description
    (ANLT-TXT50, table ANLT)
    Field: License plate no. of vehichle
    (ANLZ-KFZKZ, table ANLZ)
    i get such similar five messages but they are warning..when i execute with warning however i get the fields with description but not with Value.Ex:i get asset description and not Asset number as required.

    You don't have to link them, they ar linked that is the power of a logical data base
    To get the text in your report you need the key fields
    Like
    (Lanque Key)
    company code
    asset number
    Asset sub number
    Go to info sets and look to the standard ones like /SAPQUERY/AM01

  • How to remove duplicates in SAP Query

    Dear Frns,
    I created a simple SAP query with quickviewer by table join option.
    tables are MAST & STPO.
    Link is only STLNR.
    I am getting a duplicate extra line with same data.
    Can anyone suggest me how it happened.
    Is there anyway to remove these duplicate lines.
    pl suggest

    Hi,
    You can sort the internal table and then delete the duplicate entries.
    sort itab ascending by STLNR.
    delete adjacent duplicates from itab comparing STLNR.
    Reward points for useful answers.

  • Sap query and additional fields.

    Hello guys.
    ABAP it's not my strong skill, but i need to develop some report.
    What i need:
    input: material, SLED, plant
    output: material, SLED, plant, values from characteristic field.
    I have created sap query with additional field type c.
    Below my code:
    TYPES: BEGIN OF charast,
            ATNAM(50)    TYPE c,
            ATWTB(8)     TYPE n,
            X(50)        TYPE n,
            C(50)        TYPE n,
            ATINN(50)    TYPE n,
            END OF charast.
    DATA: char TYPE TABLE OF charast WITH HEADER LINE.
    CALL FUNCTION 'VB_BATCH_GET_DETAIL'
       EXPORTING
         MATNR              = MCH1-MATNR
         CHARG              = MCH1-CHARG
         GET_CLASSIFICATION = 'X'
       TABLES
         CHAR_OF_BATCH      = char.
    LOOP AT char into TEST (This is an additional field type C.
       ENDLOOP.
    Questions:
    1. How i can return internal table into standard abap type, because i can create additional field only with standart types.
    2. Need i fetch exporting parameters before calling FM? Or sap query do it automatically, based on given values on selection screen of the report?
    3. How i can return only needed field from FM output? Now, when i'm executing FM via SE37 it's show desired result, but when i'm getting it from code i see strange values.
    4. If i don't know exactly return by an FM values, how i can fill structure dynamically?
    5. How i can return result of a program not only to additional field but to layout?
    Sorry for noob questions and thank you in advance guys!

    Well, seems like it work fine for me.
    Below my crappy, but working code:
    DATA: material TYPE MCHB-MATNR,
           batch    TYPE MCHB-CHARG,
           plant    TYPE MCHB-WERKS,
           sloc     TYPE MCHB-LGORT,
           gtdt     TYPE STANDARD TABLE OF clbatch,
           gtdit    TYPE clbatch.
    SELECT MATNR INTO material FROM MCHB
       WHERE MATNR = MCHB-MATNR.
    ENDSELECT.
    SELECT CHARG INTO batch FROM MCHB
       WHERE CHARG = MCHB-CHARG.
    ENDSELECT.
    SELECT WERKS INTO plant FROM MCHB
       WHERE WERKS = MCHB-WERKS.
    ENDSELECT.
    SELECT LGORT INTO sloc FROM MCHB
       WHERE LGORT = MCHB-LGORT.
    ENDSELECT.
    CALL FUNCTION 'VB_BATCH_GET_DETAIL'
       EXPORTING
         MATNR = material
         CHARG = batch
         WERKS = plant
         GET_CLASSIFICATION = 'X'
        TABLES
          CHAR_OF_BATCH = gtdt.
    READ TABLE gtdt INTO gtdit
       WITH KEY atnam = 'BATCH_SHELF_LIFE_EXPIRY_DATE'.
    GTD = gtdit-ATWTB.

  • Create documentation for sap query

    Hello,
    I have created a sap query with sq01 and I want to create also documentation for it.
    I go from se38--> select the program and then change documentation,
    but the documentation button is grey.
    Thank you!

    Hi,
    Check this below link
    http://help.sap.com/saphelp_nw04s/helpdata/en/4f/83a6302fe1403db4289e2ac60b800a/frameset.htm
    Regards,
    Jyothi CH.

  • SQ01 Sap Query - additional fields doesn't appear

    Hi everybody,
    i've created a SAP Query with transaction SQ01 but one of my additional fields doesn't appear when i execute my Query.
    My query shows the G/L account number and the field status Group (table SKB1)
    I just need to display equally the text field of "field status Group" but it doesn't work.
    When i look at the parameters i can see that it makes the link between the table T004G and SKB1 in order to find the textfield but the field stay blank.
    For information T004g is a Pooled table.
    Is someone could help me?
    Thank you

    Hi,
    First you need to create a structure in Data Dictionary - SE11. This structure will contain all the fields that you want to display in the query output.
    Example - Name the Strucutre as zz_infoset01
    fields of the structure( for your requirement )
    BUKRS
    SAKNR
    FSTAG
    FSTTX
    Go to T-code SQ02
    1) Enter the Infoset name - zinfoset01 press create
    2) Enter a Short Description - G/L Infoset - 01
    3) select radio button - "Data retrieval by program"
                   and in "data structure" enter   zz_infoset01
    4) select "Integrated program" radio button
    5) In the next screen click on the "Data reading program" push button(on the application toolbar)
    6) An Editor will open with the following code
    REPORT  rsaqdvp_template .
      declarations
      (insert your declarations in this section)
    DATA:
      zz_infoset01                          TYPE zz_infoset01                          ,
      it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
      selection screen statements
      (define your selection-screen here)
    !! the following comment MUST NOT BE CHANGED !!
    *<QUERY_HEAD>
      read data into IT_DATA
    (select your data here into internal table IT_DATA)
      output of the data
      (this section can be left unchanged)
    LOOP AT it_data.
      zq01  = it_data.                        .
    !! the following comment MUST NOT BE CHANGED !!
    *<QUERY_BODY>
    ENDLOOP.     
    7) when you insert your code in the sections it will look like this
    REPORT  rsaqdvp_template .
      declarations
      (insert your declarations in this section)
    Tables:SKB1,
              t004g.          
    DATA:
      zz_infoset01                          TYPE zz_infoset01 ,
      it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
      selection screen statements
      (define your selection-screen here)
    !! the following comment MUST NOT BE CHANGED !!
    *<QUERY_HEAD>
    *These will be the input parameters for the query
    parameters: sp_bukrs like skb1-bukrs,
             sp_saknr like skb1-saknr.     
      read data into IT_DATA
    (select your data here into internal table IT_DATA)
    *get all the G/L for com code and G/L in selection screen
    SELECT bukrs saknr fstag
                INTO TABLE it_data
                FROM skb1
                WHERE bukrs = sp_bukrs
                AND   saknr = sp_saknr.
      output of the data
      (this section can be left unchanged)
    *for every G/L get the status text from t004g for lang 'EN'
    LOOP AT it_data.
    SELECT SINGLE fsttx
                    FROM t004g
                    INTO it_data-fsttx
                    WHERE spras = 'EN' "Language
                    AND   bukrs = it_data-bukrs
                    AND   fstag = it_data-fstag.
      zz_infoset01  = it_data.                        .
    !! the following comment MUST NOT BE CHANGED !!
    *<QUERY_BODY>
    ENDLOOP.     
    8) Save and generate the Infoset.By clicking on the generate button.
    9) Now assign the Infoset to the query in SQ01 and select the output list fields.
    let me know if you need more info. Also award points if helpful.
    Regards,
    Santosh

Maybe you are looking for