SAP Quick Sizing

When you are in the quick sizer, there are elements that are listed in the tool by functional area. The question I have is, a way to use the element to find out what SAP tables are tied to these elements in SAP. I am dealing with gathering data in existing SAP instance to bench mark the volume information. Is there a way to see what SAP tables are tied to the elements in quick sizer tool? Where and how can I see them?
Thanks

> I am dealing with gathering data in existing SAP instance to bench mark the volume information. Is there a way to see what SAP tables are tied to the elements in quick sizer tool? Where and how can I see them?
I was struggling with the same problem before. There's no easy way of pulling the data out. However, if you have installed the ST/A-PI addon (for early watch alerts) you can use transaction ST14 and do a run for the specific modules and see the amount of entries in the tables. Otherwise you'll need to dig through the application tables using SE16 (or SQL) with the help of some application guy/girl or by digging yourself.
Markus

Similar Messages

  • SAP BW quick sizing

    Hi all,
    I am currently at a client location. I have collected all the information related to sizing and i have all the infocubes with their dimensions and keyfigures and all the ods related information. The customer wanted quick sizing output. When i go to service market place for sizing for Business Intelligence i can see some 5 sections there as table 1 to table 5. The first section i have not entered anything as it is related to planning. Table 2 i have entered the report level information. In table 3 i am not able to enter anything as i dont understand what does that section mean. In table 4 i have few doubts as i am not able to understand the field "period". I am not sure what to enter in that field. It says the no of loads which will be kept in the infocube. Does that mean we are considering the load till archival is in place or is there any meaning to that.
    Please guide me if anybody has worked on the bw quick sizing so far.
    Your answers would be rewarded with suficient points.
    Regards
    Vijay

    Hi ,
      It reflects the no of years of data u r going to store .
    let us know if any queries , can solve it together
    regards -
    Kumar Sarvepalli -
    // honor points if helpful.

  • Quick sizing for Demand Planning system

    Hi All
    Our team is required to do quick sizing for a SCM 5.0 Demand Planning system with Livecache. The DEV and QAS is already available but not being used at all but now we need the quick sizing for the production box. I have never done any quick sizing, detailed help is appreciated. I have gone through the service.sap.com/quicksizing for demand planning it shows 3 input tables only for Throughput sizing - Time Series, DP Run, DP Users. The APO functional guys entered some numbers but not sure what to do next as the Calculate Result shows information Iam not able to understand.
    What I need from sizing is CPU processor, disk size, memory size, etc in clear detail. Please suggest, Thanks in advance.
    Regards
    Ali

    Hello Ali,
    First of all I am not a BASIS consultant and hence it would not be prudent for me to comment on hardware configuration reuqired in your case.
    Secondly I do not understand what you mean by Quicksizer has been shut down. It is available online at <a href="http://service.sap.com/quicksizer">Quicksizer Tool</a> in Service Marketplace.
    There is good amount of documentation available in the website giving details on the basis of computation of different parameters. Again SCM Hardware Configuration is not just dependent on the number of users but the functional requirements as well.
    Thirdly - I cannot explain how SAPS concept is related to SCM Quicksizing. Per my understanding the SAPS concept is an hardware-independent benchmark of throughput which is an indicator of the processing capabilities required at peak loads. SAPS will determines the number and processor speed on your Application Server depending on the processor capabilities. Most hardware vendors provide datasheets with SAPS capabilities.
    Suggest you go through the document "Background: Sizing mySAP Business Suite" under Sizing Guidelines >> General Sizing Procedures.
    Thanks,
    somnath

  • Quick Sizing question

    Hi there,
    I (my client) have a cube with 1.8 Billion records with 850K distinct values. As you may know quick sizing allows you to enter only up to 999,999,999 records per line. What is the most accurate way to size this cube? If I enter 1B and 800M as two liners, I don't think that would be same, or shuold I use RSRV instead of quick sizer or anything else?
    I appreciate your help, don't spend too much time since it's just an estimate, but I am curious if the difference will be signifcant, becuase I have 4 more over 1B cubes
    Cheers
    Tansu

    you can use DB02 as described in the below how-to
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0427b8a-7fe5-2c10-f1be-a8be71fa2c06?quicklink=index&overridelayout=true

  • SAP Hardware sizing for "User-Based sizing".

    Short Text    
    User-based Hardware Sizing    
    Long Text    
    Dear SAP Support,
    We would like to know the SAP Hardware sizing for "User-Based sizing".
    Our queries is
    1. In "User-Based sizing", What we have to consider,
    the number of users are calculated in the basis of
    Concurrent users in the system in a given point of time
    or
    total number of users logged into the systems in the whole day?
    We have referred the SAP document "Sizing SAP System" and the above
    point are not clearly mentioned.
    Regards,

    As the document says there are number of possible definitions for "users" in SAP context...
    For understanding assume that no of users logged to the system they consume different resources / areas in the system, some login to the system whole day but they don't work whole day, some user open multiple session to work while other open multiple session but they don't exactly work on it which means (every new session consume memory/resources) like you said their are concurrent users wherein they work and consume resources (SAP WPs)
    So before finalizing the sizing first compare the both reports (user based, thorhgput) and read the advantages and disadvantages for both. You can also consult with SAP / Account Manager to help you
    as per SAP document there's no point in counting no of pc's, laptops to calculate no of users
    Also refer:
    http://www.sap.com/solutions/benchmark/index.epx

  • SAPS in sizing Guide

    Hi
    Can you please help me to find out more details about processor in MDM sizing?
    From CPU I got result: 6500 I do not know how can I find processor, can you help me ?
    I found something here:
    http://aroundsap.blogspot.com/2007/09/sap-hardware-sizing-and-benchmarking.html
    but that is not exactly what I am looking for.
    Many thanks for finding CPU type.
    My result for RAM is 10 GB do you think that is correct, we have 8 repositories?
    I think my calculation is correct - I just woult like to have others consultancy
    Thank you in advance.
    Have a nice day.
    BR
    Michal

    Hi ,
    SAP periodically benchmarks different servers and indicates their SAPS. Visit: 
    http://www.sap.com/solutions/benchmark/index.epx
    Select on the right under SD Benchmarks ->"SD two-tier results" (as NW MDM is more similar to a 2 tier architecture).
    A table will open with all benchmarked server's SAPS results.
    The list updates periodically.
    You can download it to a text delimited file.
    Hard to indicate regarding the RAM you received without having more details.
    The calculation should be done for each repository on the server separately and then added up.
    Generally, 10GB memory seems a resonable result.
    Regards,
    Hedda Cohen.

  • How to find program from SAP Quick Viewer

    Hi Experts,
    Actually report had generated from SAP Quick Viewer. Now i need to trace the SAP QUERY through the program.
    Please suggest your solutions or steps to find the program from SAP Quick Viewer.
    Another clarification, is it possibe to add new fields in selection-screen through SAP Quick viewer.
    Please suggest steps to do
    Best Regards,
    Bharat

    Hi,
    I need clarification in the programming name convention.
    Report name: AQZZZPS=========Z_PSPAYMENT===
    Can you define what is SAP Query and Report program?

  • SAP EP Sizing Queries

    All,
    We have designed a clustered architecture of two SAP J2ee Engines ( one central instance
      and a dialog instance ) with no fail over option . I used quick sizer tool for initial sizing .
    My queries are
    1) In the quick sizer , I got 2800 SAPS for Enterprise Portal . Does it mean that the J2ee Engine ( Central instance ) has to be powered
    with 2800 SAPS ?
    2) What about the other J2ee engine ( dialog instance ). Is it have to be the same 2800 or 2800/2 ?
    3) In your experience , do you give equal power ( SAPS ) to both  dialog and central instance ?
    4) There are other components in the portal like ESS/MSS , LSO .So do we need to calculate the SAPS for each of these and add to
    central instance and Dialog instance ?
    5) The portal Database in a separate box , Quick sizer doesn't give any idea how to size this .Any clue about this ?
    Aneez

    Hi,
    If 2800 is the total SAPS required, then one would distribute the SAPS between database host, central instance and application host. there is no rule of thumb that CI should have more SAPS than DI, it depends on how you architect the design. ALso hardware vendors inputs would be helpful. Each server would be sized for optimum SAPS>. If you have not considered EsS/MSS or LSO during the initial sizing then ou need to reconsider it or look for additional hardware for the aextra SAPS.
    Between the DB and CI, one could distribute the SAPS 40/60.
    Also for each CPU, you should consider 2 - 4 GB of RAM, dependending on what hardware you choose.
    Hope this helps,
    Chetan

  • SAP system sizing

    Hello,
    Using quicksizer tool, the result is obtained in SAPS.
    Couldyou please provide the formula or approximation of how to calculate the system resoources based on SAPS.
    Thanks.

    Hi Gautam,
    Just start a Quicksizer and it will open a new window..there  select the option
    "for beginner" where you will get a detailed understanding of QuickSizer tool.
    Basically it is helpful when you are going to do a userbased or throughput sizing.
    Please have a look at the documentation on service.sap.com/quicksizing ->
    Quick Sizer tool -> Using the Quick Sizer -> Beginners ->
    The buttons inside the project are shelf explanatory.
    Let me know if anything is not clear.
    Thank you,
    Tilak

  • SAP CE SIZING

    Dear All,
    We are planing to Implement the SAP BPM in our land scape.
    How ever  we are about start the Sizing for the Hardware.
    I tried searching the Quick sizer in the service market place but i did not find any clue.
    Could any one help us for the sizing SAP CE
    Awaiting for your reply.

    Hi,
    Try the Quick Sizer tool in the following way:
    - Customer no. = 188213
    - Project Name = A
    - Click 'Display Projects'
    - In the search box use 'CE'
    - Check the 'Match whole word' box below the search box
    That should give you some results. You'll see a SAP Netweaver Composition Environment sizing option. That should get you started although it looks like it CE 7.1 related.
    Best Regards, Trevor

  • SAP XI Sizing

    Does someone know how to interpret data regarding to CPU in quicksizer?
    I got the following result but I can´t find any documentation explaining which CPU configuration I should use:
    What I need is the number of CPU´s and recommended technical configuration.
    Throughput Results for Sizing Project
    CPU cat. M
    SAPS (total)
    10.100
    Memory (total, MB)
    21.504
    Thanks in advance
    MH

    Hussar,
    Please see this documents for some information on this:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/72e2bb90-0301-0010-e883-c390ad8a975a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dc9381e-0a01-0010-c692-f6bf424b0b94
    Regards,
    ---Satish

  • SAP Archiving Sizing

    Hello,
    I am attempting to determine the sizing requirements for the native SAP data archiving capability. I realize that sizing requirements are dependent upon an upfront analysis of the potential archiving objects, however, I'm simply trying to get an idea for planning purposes. At this point we are only looking at native SAP functionality and not 3rd party tools or storage. I would like to know how CPU and RAM will be affected when reporting runs are executed on archived objects. There are no sizing algorithms or documentation specific to archiving that I have been able find online.
    Thanks.

    Hi Christopher,
    Do you have an oss id?  If so, there is a document out on www.service.sap.com/ilm titled "Performance Aspects of Data Archiving".  This document is located if you scroll down within the "News" box in the upper right hand corner.
    This white paper discusses the relationship between data archiving and system performance. It demonstrates under which circumstances data archiving can help improve the performance of a system, and which concrete steps must be taken to achieve this goal.
    Hope this helps.
    Best Regards,
    Karin Tillotson

  • SAP GRC Sizing guidelines

    Hi,
    Is there any sizing tools available for a GRC installation on Windows and Oracle? I have used the quicksizer tool to size core components such as ERP, however I have not come across any tools or documentation that give guidance for sizing GRC.
    Regards.

    Here is the link to the preliminary sizing guidelines:
    https://community.wdf.sap.corp/sbs/message/73966#73966
    Best, Jürgen

  • Problem with selection fields in SAP Quick Viewer

    Hi Friends
    I am using SQVI t-code to develop the SAP queries. I have developed a query using tables KNA1, VBAK and VBAP. Initially I used customer number, customer name, city, document creation data, document type and document number as selection fields. Now I have removed customer name, city, document creation data, document type from selection fields.  I am executing this query through a Function module "RSAQ_REMOTE_QUERY_CALL". While passing the data to selection table, even after deleting the 4 selection fields, still I have to pass the sales document number positioning as 6. Is there any way to solve this and make its position as 2.
    I have gone through the FM "RSAQ_IMPORT_QUERY", there one table parameter O_DBSE will retrieve the values for selection fields are designed for that query, again its tedious process, I have create a customized function module and make the required changes. Instead of using this FM, is there any table which stores the data of the selection fields of a query. I have tried for the table and I failed to find that.
    Please help me in this regards
    Regards
    Praveen

    Hello, I am trying to create LSMW to upload KP06 also, we have been uploading by copying and pasting once we run the iverview layout and then save. The problem is that we can only do this by G/L account. We want to use one file to upload all. Can you give me some tips how you were able to accomplished. I am familiar with LSMW, but tcode KP06 behaves in different ways. Do you use the flexible upload to load the fiel thru LSMW? Can you tell me which fields you touch in KP06 when you were recording?
    Thanks You,

  • Sap Quick viewer or quiry (SQVI)

    Hi,
    We have sales report requirement and i am trying achive this through SQVI.
    Please explain logic of customizing report through quiry. Ie, Table join, logical database and sap quiry infoset.
    And requitrement is as mentioned below.
    Sales order No.
    customer
    PO nO.
    PO. date
    line item
    material
    plant
    required delivery date
    total order qty
    Qty delivered
    open order qty
    open order value
    Best regards,
    ramesh

    Hi,
    Please send the quiry builder material for the below mentioned e-mail ID.
    System is not allowed mail id so below id belongs to Gmail
    Text Removed
    Best Regards,
    ramesh
    Edited by: Lakshmipathi on Jul 26, 2011 2:25 PM
    Please dont deviate the forum rules by asking to share any SAP information to personal mail

Maybe you are looking for