SAP R/3 4.6 C on Win 2003 Server, installation error.
Hi all,
I am trying to install SAP R/3 4.6C on a Windows 2003 server Enterprise edition. well at the time of the installation of Oracle 9.0, am I also suppose to create a database, I am using Oracle Universal installer, and it gives me an option to create database or not to.
well, If I do, then it gives me an error at the time of the installation of Database Instance at a stage where the SAP database creation takes place, If I don't then SAP database creation succeeds, all the tablespaces are created successfully, however the post oracle configuration stage gives an error, stating that an SQL statement exec failed... I have tried installing the SAP system more than 20 times, everytime in vain.,
what should I do, Please Help....
Hi,
I'm not aware there is an R/3 preview version available somwhere. Though, wrong forum...
Similar Messages
-
Error during installation of SAP on win 2003 Server
Hello All,
I am trying to install SAP 4.6 on win 2003 server. The process of installation has completed for almost more than 9 hours. I am getting an error during "Database post processing". When I clicked "retry" the installation has stopped and restarted the system. I tried to start the SAP server which turns from Yellow to green. In my case, it turns to yellow and cannot proceed further.
Also, is it necessary to stop the Oracle services till the end of the installtion?
In addition, please send me Installation guide for the same to my mailid:
[email protected]
Please do let me know your inputs on how to resolve the issue.
Thanks in advance.
Regards
Noor Basha-> which database are you on?
-> sap 4.6 is rather old...think about installing supported releases such as 4.7 or erp2004/2005
-> what were your guides/notes you referred to during the installation?
GreetZ, AH -
MaxDB install failure on Win 2003 Server
Win 2003 Server
MaxDB v 7.6.05.09
HP Proliant G5
Good morning,
We've got a problem with a MaxDB install on a fresh Win 2003 server.
- The first install process and the demo database worked fine
- We tried to create a new database instance and it hung. As nothing was working as expected we decided to uninstall maxdb and all its component and to re-start from a clean process. That's were things are becoming weird :
- The first time the setup assistant hung when installing the kernel
- The secund time the setup assistant hung when installing the demo database
- Every following test hangs when installing the kernel
We tried to do a clean uninstall MaxDB, to watch which registry keys we should restore... but nothings worked as expected.
We found a link at this address describing the same problem but it doesn't provide us anything to solve our problem.
Here is our log file :
INSTALLER_INFO: Version = 7.6.05 Build 009-123-191-997
INSTALLER_INFO: Changelist = 191997
INSTALLER_INFO: MakeId = 323091
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = SRVBATINOR
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.2
SYS_INFO: Subversion = Service Pack 2
MSG: collector found 12 archives
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
MSG: initializing package "Base"
MSG: calling preinstall...
MSG: service "sql6" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: service "sapdbni72" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: Template set indep data path to "c:/documents and settings/all users/application data/sdb/data"
MSG: Template set indep programs path to "c:/program files/sdb/programs"
ACTION: make directory "c:/documents and settings/all users/application data/sdb/data/config" mode "775"
ACTION: make directory "c:/documents and settings/all users/application data/sdb/data/config/install" mode "775"
MSG: InstallRegistry: space check ok: 41676028 kb on C: (51203980 kb total) available
MSG: install registry successfully locked
MSG: InstallRegistry::Log: space check ok: 41676028 kb on C: (51203980 kb total) available
MSG: writing 0 packages
MSG: net install registry size = 63 bytes
MSG: wrote install registry (125 bytes)
MSG: InstallRegistry: reserved 1024 kb disk space
getRelease():C:/Program Files/SDB/MAXDB1/pgm/kernel.exe not found
MSG: migrate server installation data for INSTROOT "c:/program files/sdb/maxdb1"
MSG: initializing package "Server Utilities"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "Database Kernel"
MSG: calling preinstall...
MSG: Template or instance update set dependent path to c:/program files/sdb/maxdb1
Msg: checking update of package "Database Kernel" in C:Program Filessdbmaxdb1
MSG: installed package is flaged as invalid => skipping update check
MSG: initializing package "Redist Python"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "Loader"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "ODBC"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "Messages"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "JDBC"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "Synchronization Manager"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "SQLDBC"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "MaxDB PHP Driver"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
MSG: initializing package "DB Analyzer"
MSG: calling preinstall...
MSG: path was set by preinstall script (c:/program files/sdb/programs)
ACTION: make directory "C:/Program Files/sdb" mode "555"
ACTION: make directory "C:/Program Files/sdb/programs" mode "555"
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBBAS.TGZ"
MSG: running postprepare of package Base
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBUTL.TGZ"
ACTION: make directory "C:/Program Files/sdb/MAXDB1" mode "555"
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBKRN.TGZ"
MSG: running postprepare of package Database Kernel
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBRDPY.TGZ"
MSG: running postprepare of package Redist Python
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBLD.TGZ"
MSG: running postprepare of package Loader
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBODBC.TGZ"
MSG: running postprepare of package ODBC
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBMSG.TGZ"
MSG: running postprepare of package Messages
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBJDBC.TGZ"
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SYNCMAN.TGZ"
MSG: running postprepare of package Synchronization Manager
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBC.TGZ"
MSG: running postprepare of package Database Connectivity
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBPHP.TGZ"
STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBANA.TGZ"
MSG: running postprepare of package DB Analyzer
MSG: space check ok: 41672820 kb on (51203980 kb total) available
MSG: packagedata of package Base changed
MSG: writing 2 packages
MSG: net install registry size = 4113 bytes
MSG: wrote install registry (5162 bytes)
STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBBAS.TGZ"
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:58:53 bin/
STDOUT: extracting: -rwxr-xr-x 802816 2008-08-15 21:53:13 bin/dbmevtdisp.exe
STDOUT: extracting: -rwxr-xr-x 294912 2008-08-15 21:49:43 bin/protconv.exe
STDOUT: extracting: -rwxr-xr-x 151552 2008-08-15 20:11:07 bin/sdbconfig.exe
STDOUT: extracting: -rwxr-xr-x 7168 2008-08-16 00:57:39 bin/SDBINST.EXE
STDOUT: extracting: -rwxr-xr-x 6144 2008-08-16 00:57:40 bin/sdbpack.exe
STDOUT: extracting: -rwxr-xr-x 7680 2008-08-16 00:57:40 bin/sdbreg.exe
STDOUT: extracting: -rwxr-xr-x 7680 2008-08-16 00:57:40 bin/sdbregview.exe
STDOUT: extracting: -rwxr-xr-x 13824 2008-08-16 00:57:39 bin/SDBSETUP.EXE
STDOUT: extracting: -rwxr-xr-x 7680 2008-08-16 00:57:39 bin/sdbuninst.exe
STDOUT: extracting: -rwxr-xr-x 7168 2008-08-16 00:57:40 bin/sdbverify.exe
STDOUT: extracting: -rwxr-xr-x 1257472 2008-08-16 00:35:29 bin/sqlcli.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xsysrc.exe
STDOUT: extracting: -rwxr-xr-x 323584 2008-08-15 20:24:45 bin/xtcpupd.exe
STDOUT: extracting: -rwxr-xr-x 294912 2008-08-15 19:55:07 bin/xuser.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_ping.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:58:53 install/
STDOUT: extracting: -rwxr-xr-x 192512 2008-08-16 00:54:07 install/Grid.dll
STDOUT: extracting: -rwxr-xr-x 757760 2008-08-16 00:41:09 install/perl58.dll
STDOUT: extracting: -rw-rr 117099 2008-08-16 00:57:38 install/RESOURCES.TGZ
STDOUT: extracting: -rw-rr 465022 2008-08-16 00:57:38 install/SDBINST.TGZ
STDOUT: extracting: -rwxr-xr-x 421888 2008-08-16 00:57:27 install/sdbrun.dll
STDOUT: extracting: -rwxr-xr-x 1245184 2008-08-16 00:56:33 install/Wx.dll
STDOUT: extracting: -rwxr-xr-x 2265088 2008-08-16 00:53:37 install/wxmsw24.dll
STDOUT: extracting: -rw-rr 64327 2008-08-16 00:57:42 install/WXPERL.TGZ
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:58:54 pgm/
STDOUT: extracting: -rwxr-xr-x 2101248 2008-08-15 21:49:55 pgm/dbmcli.exe
STDOUT: extracting: -rwxr-xr-x 2101248 2008-08-15 21:49:55 pgm/dbmcli_HelpInst.exe
STDOUT: extracting: -rwxr-xr-x 217088 2008-08-15 22:11:27 pgm/regupd.exe
STDOUT: extracting: -rwxr-xr-x 307200 2008-08-15 20:25:09 pgm/sqlping.exe
STDOUT: extracting: -rwxr-xr-x 49152 2008-08-15 19:46:03 pgm/sqltcp.dll
STDOUT: extracting: -rwxr-xr-x 49152 2008-08-15 19:46:03 pgm/sqltcp1.dll
STDOUT: extracting: -rwxr-xr-x 49152 2008-08-15 19:46:05 pgm/sqltcp2.dll
STDOUT: extracting: -rwxr-xr-x 45056 2008-08-15 19:46:07 pgm/sqltcpn.dll
STDOUT: extracting: -rwxr-xr-x 281952 2008-08-16 00:58:28 pgm/sqluser72.dll
STDOUT: extracting: -rwxr-xr-x 372672 2008-08-16 00:58:32 pgm/sqluser73.dll
STDOUT: extracting: -rwxr-xr-x 393216 2008-08-16 00:58:35 pgm/sqluser74.dll
STDOUT: extracting: -rwxr-xr-x 438272 2008-08-16 00:58:38 pgm/sqluser74n.dll
STDOUT: extracting: -rwxr-xr-x 524288 2008-08-16 00:15:41 pgm/sqluser76.dll
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:01 Support/
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:02 Support/Mapfiles/
STDOUT: extracting: -rw-rr 3023564 2008-08-15 21:49:54 Support/Mapfiles/dbmcli.map
STDOUT: extracting: -rw-rr 1265024 2008-08-15 21:53:13 Support/Mapfiles/dbmevtdisp.map
STDOUT: extracting: -rw-rr 115063 2008-08-15 20:28:06 Support/Mapfiles/sqltcp.map
STDOUT: extracting: -rw-rr 115066 2008-08-15 20:28:07 Support/Mapfiles/sqltcp1.map
STDOUT: extracting: -rw-rr 115148 2008-08-15 20:28:09 Support/Mapfiles/sqltcp2.map
STDOUT: extracting: -rw-rr 108889 2008-08-15 20:28:13 Support/Mapfiles/sqltcpn.map
STDOUT: extracting: -rw-rr 125887 2008-08-16 00:58:30 Support/Mapfiles/sqluser72.map
STDOUT: extracting: -rw-rr 147341 2008-08-16 00:58:33 Support/Mapfiles/sqluser73.map
STDOUT: extracting: -rw-rr 258131 2008-08-16 00:58:36 Support/Mapfiles/sqluser74.map
STDOUT: extracting: -rw-rr 739428 2008-08-16 00:58:39 Support/Mapfiles/sqluser74n.map
STDOUT: extracting: -rw-rr 916710 2008-08-16 00:15:41 Support/Mapfiles/sqluser76.map
STDOUT: extracting: -rw-rr 593052 2008-08-15 20:24:45 Support/Mapfiles/xtcpupd.map
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:04 symbols/
STDOUT: extracting: -rw-rr 8252416 2008-08-15 21:49:54 symbols/dbmcli.pdb
STDOUT: extracting: -rw-rr 3836928 2008-08-15 21:53:13 symbols/dbmevtdisp.pdb
STDOUT: extracting: -rw-rr 289792 2008-08-15 20:28:06 symbols/sqltcp.pdb
STDOUT: extracting: -rw-rr 289792 2008-08-15 20:28:07 symbols/sqltcp1.pdb
STDOUT: extracting: -rw-rr 289792 2008-08-15 20:28:09 symbols/sqltcp2.pdb
STDOUT: extracting: -rw-rr 281600 2008-08-15 20:28:13 symbols/sqltcpn.pdb
STDOUT: extracting: -rw-rr 1887232 2008-08-16 00:58:37 symbols/sqluser74.pdb
STDOUT: extracting: -rw-rr 2059264 2008-08-16 00:58:40 symbols/sqluser74n.pdb
STDOUT: extracting: -rw-rr 4705280 2008-08-15 20:24:44 symbols/xtcpupd.pdb
STDOUT: checking unpacked archive... MSG: check file "Support/Mapfiles/sqluser72.map": ok
MSG: check file "symbols/sqltcpn.pdb": ok
MSG: check file "pgm/dbmcli_HelpInst.exe": ok
MSG: check file "bin/x_ping.exe": ok
MSG: check file "Support/Mapfiles/sqluser74.map": ok
MSG: check file "bin/SDBINST.EXE": ok
MSG: check file "install/SDBINST.TGZ": ok
MSG: check file "pgm/sqluser74.dll": ok
MSG: check file "symbols/dbmcli.pdb": ok
MSG: check file "symbols/sqltcp1.pdb": ok
MSG: check file "bin/SDBSETUP.EXE": ok
MSG: check file "pgm/sqluser74n.dll": ok
MSG: check file "Support/Mapfiles/sqltcp.map": ok
MSG: check file "bin/protconv.exe": ok
MSG: check file "symbols/sqltcp.pdb": ok
MSG: check file "Support/Mapfiles/sqltcpn.map": ok
MSG: check file "install/WXPERL.TGZ": ok
MSG: check file "install/wxmsw24.dll": ok
MSG: check file "install/sdbrun.dll": ok
MSG: check file "bin/xuser.exe": ok
MSG: check file "pgm/sqluser73.dll": ok
MSG: check file "pgm/sqluser76.dll": ok
MSG: check file "symbols/xtcpupd.pdb": ok
MSG: check file "pgm/sqltcp1.dll": ok
MSG: check file "Support/Mapfiles/sqluser74n.map": ok
MSG: check file "pgm/dbmcli.exe": ok
MSG: check file "pgm/sqltcp.dll": ok
MSG: check file "install/RESOURCES.TGZ": ok
MSG: check file "Support/Mapfiles/dbmevtdisp.map": ok
MSG: check file "Support/Mapfiles/sqluser73.map": ok
MSG: check file "Support/Mapfiles/xtcpupd.map": ok
MSG: check file "bin/sdbverify.exe": ok
MSG: check file "bin/xsysrc.exe": ok
MSG: check file "Support/Mapfiles/sqltcp1.map": ok
MSG: check file "Support/Mapfiles/sqltcp2.map": ok
MSG: check file "install/perl58.dll": ok
MSG: check file "Support/Mapfiles/sqluser76.map": ok
MSG: check file "bin/sdbuninst.exe": ok
MSG: check file "pgm/regupd.exe": ok
MSG: check file "symbols/dbmevtdisp.pdb": ok
MSG: check file "pgm/sqlping.exe": ok
MSG: check file "bin/sdbpack.exe": ok
MSG: check file "symbols/sqltcp2.pdb": ok
MSG: check file "pgm/sqltcpn.dll": ok
MSG: check file "pgm/sqluser72.dll": ok
MSG: check file "symbols/sqluser74.pdb": ok
MSG: check file "Support/Mapfiles/dbmcli.map": ok
MSG: check file "pgm/sqltcp2.dll": ok
MSG: check file "bin/dbmevtdisp.exe": ok
MSG: check file "bin/sdbregview.exe": ok
MSG: check file "bin/xtcpupd.exe": ok
MSG: check file "install/Grid.dll": ok
MSG: check file "bin/sdbconfig.exe": ok
MSG: check file "symbols/sqluser74n.pdb": ok
MSG: check file "bin/sdbreg.exe": ok
MSG: check file "install/Wx.dll": ok
MSG: check file "bin/sqlcli.exe": ok
STDOUT: ok
STDOUT: checking system libraries...MSG: update test sytem file "C:/WINDOWS/system32/mfc70.dll"
MSG: system file "mfc70.dll" inside archive has version 7.00.9466.0
MSG: installed system file "mfc70.dll" is up to date (version 7.00.9466.0)
MSG: update test sytem file "C:/WINDOWS/system32/mfc70u.dll"
MSG: system file "mfc70u.dll" inside archive has version 7.00.9466.0
MSG: installed system file "mfc70u.dll" is up to date (version 7.00.9466.0)
MSG: update test sytem file "C:/WINDOWS/system32/mfc71.dll"
MSG: system file "mfc71.dll" inside archive has version 7.10.3077.0
MSG: installed system file "mfc71.dll" is up to date (version 7.10.3077.0)
MSG: update test sytem file "C:/WINDOWS/system32/mfc71u.dll"
MSG: system file "mfc71u.dll" inside archive has version 7.10.3077.0
MSG: installed system file "mfc71u.dll" is up to date (version 7.10.3077.0)
MSG: update test sytem file "C:/WINDOWS/system32/msvcr70.dll"
MSG: system file "msvcr70.dll" inside archive has version 7.00.9466.0
MSG: installed system file "msvcr70.dll" is up to date (version 7.00.9466.0)
MSG: update test sytem file "C:/WINDOWS/system32/msvcr71.dll"
MSG: system file "msvcr71.dll" inside archive has version 7.10.3052.4
MSG: installed system file "msvcr71.dll" is up to date (version 7.10.3052.4)
STDOUT: ok
SYS: "C:Program Filessdbprograms insdbconfig.exe" "IndepPrograms=C:Program Filessdbprograms"
SYS: "C:Program Filessdbprograms insdbconfig.exe" "IndepData=C:Documents and SettingsAll UsersApplication Datasdbdata"
STDOUT: system path updated successfully
STDOUT: please reboot your system after installation to take effect changes
MSG: registry subkey "SOFTWAREMicrosoft" exist
MSG: registry subkey "SOFTWAREMicrosoftWindows" exist
MSG: registry subkey "SOFTWAREMicrosoftWindowsCurrentVersion" exist
MSG: registry subkey "SOFTWAREMicrosoftWindowsCurrentVersionUninstall" exist
MSG: created registry subkey "SOFTWAREMicrosoftWindowsCurrentVersionUninstallSAP DB (ALL)" successfully
ACTION: make directory "C:/Documents and Settings/All Users/Menu DÈmarrer/Programmes/MaxDB" mode "775"
ACTION: make directory "C:/Documents and Settings/All Users/Menu DÈmarrer/Programmes/MaxDB/Command Line Tools" mode "775"
MSG: start menu shortcuts created
MSG: packagedata of package Base changed
MSG: writing 2 packages
MSG: net install registry size = 32157 bytes
MSG: wrote install registry (36384 bytes)
MSG: packagedata of package Server Utilities changed
MSG: writing 3 packages
MSG: net install registry size = 32773 bytes
MSG: wrote install registry (37403 bytes)
STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBUTL.TGZ"
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:53 bin/
STDOUT: extracting: -rwxr-xr-x 65536 2008-08-15 21:52:21 bin/sdbinfo.exe
STDOUT: extracting: -rwxr-xr-x 356352 2008-08-16 00:05:31 bin/sqlrun.dll
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/sysmon.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xbackup.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xinstinfo.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xpu.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_analys.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_cons.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_server.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_show.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_start.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_stop.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_wiz.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_wizard.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_wizstop.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_wiztrc.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:53 env/
STDOUT: extracting: -rw-rr 122 2008-08-15 22:02:13 env/serv.use
STDOUT: extracting: -rw-rr 245 2008-08-15 22:02:13 env/xstart.use
STDOUT: extracting: -rw-rr 542 2008-08-15 22:02:13 env/xstop.use
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:53 etc/
STDOUT: extracting: -rw-rr 207 2008-08-15 19:42:23 etc/VERSIONS
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:53 pgm/
STDOUT: extracting: -rwxr-xr-x 483328 2008-08-15 20:11:45 pgm/serv.exe
STDOUT: extracting: -rwxr-xr-x 307200 2008-08-15 20:11:09 pgm/show.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:54 Support/
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:54 Support/Mapfiles/
STDOUT: extracting: -rw-rr 839796 2008-08-15 20:11:44 Support/Mapfiles/serv.map
STDOUT: extracting: -rw-rr 540173 2008-08-15 20:11:08 Support/Mapfiles/show.map
STDOUT: extracting: -rw-rr 615852 2008-08-16 00:05:31 Support/Mapfiles/sqlrun.map
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 00:59:55 symbols/
STDOUT: extracting: -rw-rr 2575360 2008-08-15 20:11:44 symbols/serv.pdb
STDOUT: extracting: -rw-rr 2051072 2008-08-15 20:11:08 symbols/show.pdb
STDOUT: extracting: -rw-rr 2075648 2008-08-16 00:05:31 symbols/sqlrun.pdb
STDOUT: checking unpacked archive... MSG: check file "bin/x_wizstop.exe": ok
MSG: check file "bin/x_analys.exe": ok
MSG: check file "bin/x_cons.exe": ok
MSG: check file "bin/xpu.exe": ok
MSG: check file "bin/sysmon.exe": ok
MSG: check file "bin/x_start.exe": ok
MSG: check file "pgm/serv.exe": ok
MSG: check file "env/xstart.use": ok
MSG: check file "bin/x_server.exe": ok
MSG: check file "bin/sqlrun.dll": ok
MSG: check file "etc/VERSIONS": ok
MSG: check file "bin/x_wiz.exe": ok
MSG: check file "bin/xbackup.exe": ok
MSG: check file "Support/Mapfiles/sqlrun.map": ok
MSG: check file "symbols/show.pdb": ok
MSG: check file "bin/x_show.exe": ok
MSG: check file "symbols/sqlrun.pdb": ok
MSG: check file "env/serv.use": ok
MSG: check file "env/xstop.use": ok
MSG: check file "symbols/serv.pdb": ok
MSG: check file "pgm/show.exe": ok
MSG: check file "bin/x_wizard.exe": ok
MSG: check file "bin/sdbinfo.exe": ok
MSG: check file "bin/xinstinfo.exe": ok
MSG: check file "bin/x_wiztrc.exe": ok
MSG: check file "Support/Mapfiles/show.map": ok
MSG: check file "Support/Mapfiles/serv.map": ok
MSG: check file "bin/x_stop.exe": ok
STDOUT: ok
SYS: "c:program filessdbprograms inx_server.exe" install: 19712 INFO: Service 'XServer' is already installed
SYS: "c:program filessdbprograms inx_server.exe" remove: 19710 INFO: Service 'XServer' removed successfully
SYS: "c:program filessdbprograms inx_server.exe" install: 19709 INFO: Service 'XServer' installed successfully
MSG: SYSTEM PATH is up to date
MSG: packagedata of package Server Utilities changed
MSG: writing 3 packages
MSG: net install registry size = 39793 bytes
MSG: wrote install registry (45406 bytes)
MSG: packagedata of package Database Kernel changed
MSG: writing 3 packages
MSG: net install registry size = 39793 bytes
MSG: wrote install registry (45405 bytes)
MSG: no function "register" in package Database Kernel
MSG: set function reference "unregister" in package Database Kernel
MSG: set function reference "preuninstall" in package Database Kernel
MSG: set function reference "postuninstall" in package Database Kernel
MSG: no function "verify" in package Database Kernel
STDOUT: unregister Database Kernel 7.6.5.9
WRN: cannot execute command: xregcomp -u "c:program filessdbmaxdb1pgmdbpinstall": cannot create process, Le fichier spÈcifiÈ est introuvable.
WRN: cannot execute command: xregcomp -u "c:program filessdbprogramsliblivecachedbg": cannot create process, Le fichier spÈcifiÈ est introuvable.
SYS: dbmcli -R "c:program filessdbmaxdb1" inst_unreg : Error! Connection failed to node (local) for database (no dbname):
SYS: dbmcli -R "c:program filessdbmaxdb1" inst_unreg : dbmsrv executable not found
STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBKRN.TGZ"
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:15 bin/
STDOUT: extracting: -rwxr-xr-x 274432 2008-08-15 21:51:01 bin/backint.exe
STDOUT: extracting: -rwxr-xr-x 802816 2008-08-15 21:53:13 bin/dbmevtdisp.exe
STDOUT: extracting: -rwxr-xr-x 552960 2008-08-15 21:53:27 bin/dbmevthndl_display.exe
STDOUT: extracting: -rwxr-xr-x 569344 2008-08-15 21:53:37 bin/dbmevthndl_winlog.exe
STDOUT: extracting: -rwxr-xr-x 290816 2008-08-15 21:48:43 bin/dbmsrvctl.exe
STDOUT: extracting: -rwxr-xr-x 41705 2008-08-15 19:51:15 bin/ireport.py
STDOUT: extracting: -rwxr-xr-x 245760 2008-08-15 21:52:11 bin/pipe2file.exe
STDOUT: extracting: -rwxr-xr-x 1232896 2008-08-15 21:51:09 bin/sdbfill.exe
STDOUT: extracting: -rwxr-xr-x 356352 2008-08-16 00:05:31 bin/sqlrun.dll
STDOUT: extracting: -rwxr-xr-x 53248 2008-08-15 19:55:01 bin/sqlver.exe
STDOUT: extracting: -rwxr-xr-x 53248 2008-08-15 19:55:01 bin/sqlwhat.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xkernprot.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xservice.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/xtracesort.exe
STDOUT: extracting: -rwxr-xr-x 40960 2008-08-16 00:05:33 bin/x_diagnose.exe
STDOUT: extracting: -rwxr-xr-x 331776 2008-08-15 21:53:55 bin/x_python.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:07 cluster/
STDOUT: extracting: -rwxr-xr-x 2121728 2008-08-15 20:24:13 cluster/dbmsrv_clu.exe
STDOUT: extracting: -rwxr-xr-x 81920 2008-08-15 20:12:33 cluster/SAPDBMSCSEx.dll
STDOUT: extracting: -rwxr-xr-x 122880 2008-08-15 20:12:43 cluster/sapdbmscsman.dll
STDOUT: extracting: -rwxr-xr-x 77824 2008-08-15 20:12:07 cluster/SAPDBMSCSMan.exe
STDOUT: extracting: -rwxr-xr-x 57344 2008-08-15 20:12:01 cluster/SAPDBMSCSRes.dll
STDOUT: extracting: -rwxr-xr-x 307200 2008-08-15 20:12:57 cluster/service_clu.exe
STDOUT: extracting: -rwxr-xr-x 499712 2008-08-15 20:12:55 cluster/serv_clu.exe
STDOUT: extracting: -rwxr-xr-x 339968 2008-08-15 20:12:53 cluster/stop_clu.exe
STDOUT: extracting: -rwxr-xr-x 339968 2008-08-15 20:12:51 cluster/strt_clu.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:07 demo/
STDOUT: extracting: -rw-rr 3110911 2008-08-15 19:51:15 demo/HOTEL.py
STDOUT: extracting: -rwxr-xr-x 367 2008-08-15 19:51:15 demo/ltutorial.py
STDOUT: extracting: -rw-rr 11333 2008-08-15 19:51:15 demo/tutoriallib.py
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:17 doc/
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:19 doc/FirstSteps/
STDOUT: extracting: -rw-rr 3455 2008-08-15 19:51:15 doc/FirstSteps/index.html
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:18 doc/FirstSteps/Java/
STDOUT: extracting: -rw-rr 1019 2008-08-15 19:51:15 doc/FirstSteps/Java/DemodbData.class
STDOUT: extracting: -rw-rr 1536 2008-08-15 19:51:15 doc/FirstSteps/Java/DemodbData.java
STDOUT: extracting: -rw-rr 1599 2008-08-15 19:51:15 doc/FirstSteps/Java/HelloMaxDB.class
STDOUT: extracting: -rw-rr 1459 2008-08-15 19:51:15 doc/FirstSteps/Java/HelloMaxDB.java
STDOUT: extracting: -rw-rr 1959 2008-08-15 19:51:15 doc/FirstSteps/Java/HowToJava.html
STDOUT: extracting: -rw-rr 1305 2008-08-15 19:51:15 doc/FirstSteps/Java/StateMaxDB.class
STDOUT: extracting: -rw-rr 1064 2008-08-15 19:51:15 doc/FirstSteps/Java/StateMaxDB.java
STDOUT: extracting: -rw-rr 227 2008-08-15 19:51:15 doc/FirstSteps/maxdbenv.cmd
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:18 doc/FirstSteps/ODBC/
STDOUT: extracting: -rw-rr 4510 2008-08-15 19:51:15 doc/FirstSteps/ODBC/HelloMaxDB.c
STDOUT: extracting: -rw-rr 1293 2008-08-15 19:51:15 doc/FirstSteps/ODBC/HowToODBC.html
STDOUT: extracting: -rw-rr 393 2008-08-15 19:51:15 doc/FirstSteps/ODBC/Makefile
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:18 doc/FirstSteps/Perl/
STDOUT: extracting: -rw-rr 973 2008-08-15 19:51:15 doc/FirstSteps/Perl/demodbData.pm
STDOUT: extracting: -rw-rr 1894 2008-08-15 19:51:15 doc/FirstSteps/Perl/HowToPerl.html
STDOUT: extracting: -rwxr-xr-x 960 2008-08-15 19:51:15 doc/FirstSteps/Perl/StateMaxDB.pl
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:19 doc/FirstSteps/Python/
STDOUT: extracting: -rw-rr 871 2008-08-15 19:51:15 doc/FirstSteps/Python/demodbData.py
STDOUT: extracting: -rwxr-xr-x 859 2008-08-15 19:51:15 doc/FirstSteps/Python/HelloMaxDB-API.py
STDOUT: extracting: -rwxr-xr-x 859 2008-08-15 19:51:15 doc/FirstSteps/Python/HelloMaxDB.py
STDOUT: extracting: -rw-rr 3043 2008-08-15 19:51:15 doc/FirstSteps/Python/HowToPython.html
STDOUT: extracting: -rwxr-xr-x 865 2008-08-15 19:51:15 doc/FirstSteps/Python/StateMaxDB.py
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:20 doc/FirstSteps/SQLDBC/
STDOUT: extracting: -rw-rr 3522 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/HelloMaxDB.cpp
STDOUT: extracting: -rw-rr 1329 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/HowToSQLDBC.html
STDOUT: extracting: -rw-rr 563 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/Makefile
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:10 env/
STDOUT: extracting: -rwxr-xr-x 6260 2008-08-15 21:53:37 env/APPS.py
STDOUT: extracting: -rw-rr 3800 2008-08-15 21:53:37 env/CNR3DATA.py
STDOUT: extracting: -rw-rr 8216 2008-08-15 21:53:37 env/CNR3TAB.py
STDOUT: extracting: -rw-rr 201779 2008-08-15 22:02:13 env/cserv.pcf
STDOUT: extracting: -rw-rr 1861 2008-08-15 21:53:37 env/DBANA.py
STDOUT: extracting: -rw-rr 17874 2008-08-15 21:53:39 env/DBMVIEWS.py
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:08 env/en/
STDOUT: extracting: -rw-rr 7609 2008-08-15 22:02:13 env/en/DBM.en
STDOUT: extracting: -rw-rr 15713 2008-08-15 21:53:39 env/GARBAGE.py
STDOUT: extracting: -rw-rr 249 2008-08-15 22:02:13 env/general.use
STDOUT: extracting: -rwxr-xr-x 1304 2008-08-15 21:53:45 env/getpackages.py
STDOUT: extracting: -rw-rr 1144 2008-08-15 21:53:39 env/INFO.py
STDOUT: extracting: -rw-rr 14609 2008-08-15 21:53:45 env/installib.py
STDOUT: extracting: -rw-rr 90473 2008-08-15 21:53:39 env/JDBC.py
STDOUT: extracting: -rw-rr 396 2008-08-15 22:02:13 env/kernprot.use
STDOUT: extracting: -rwxr-xr-x 949 2008-08-15 21:53:45 env/lapps.py
STDOUT: extracting: -rw-rr 8269 2008-08-15 19:51:15 env/lsystab.py
STDOUT: extracting: -rw-rr 19514 2008-08-15 21:53:39 env/ODBC.py
STDOUT: extracting: -rw-rr 1241 2008-08-15 21:53:39 env/ORADD.py
STDOUT: extracting: -rw-rr 266421 2008-08-15 21:53:41 env/ORADDCOM.py
STDOUT: extracting: -rw-rr 9586 2008-08-15 21:53:41 env/ORADDSYN.py
STDOUT: extracting: -rw-rr 158400 2008-08-15 21:53:41 env/ORADDV.py
STDOUT: extracting: -rw-rr 1400 2008-08-15 21:53:41 env/PRECOM.py
STDOUT: extracting: -rw-rr 50345 2008-08-15 21:53:45 env/REPOSITORY.py
STDOUT: extracting: -rw-rr 61439 2008-08-15 21:53:39 env/SAPDBLOADER.py
STDOUT: extracting: -rw-rr 4483 2008-08-15 21:53:41 env/SHOWCMD.py
STDOUT: extracting: -rw-rr 49869 2008-08-15 21:53:41 env/SQLDBC.py
STDOUT: extracting: -rw-rr 48352 2008-08-15 21:53:41 env/SYSDBA.py
STDOUT: extracting: -rw-rr 59678 2008-08-15 21:53:43 env/SYSDBACOM.py
STDOUT: extracting: -rw-rr 16770 2008-08-15 21:53:43 env/SYSINFO.py
STDOUT: extracting: -rw-rr 114665 2008-08-15 21:53:43 env/SYSINFOCOM.py
STDOUT: extracting: -rw-rr 17793 2008-08-15 21:53:43 env/TRIGGER.py
STDOUT: extracting: -rw-rr 3203 2008-08-15 21:53:43 env/UDE.py
STDOUT: extracting: -rw-rr 6596 2008-08-15 21:53:45 env/WA.py
STDOUT: extracting: -rw-rr 54914 2008-08-15 21:53:43 env/XDD.py
STDOUT: extracting: -rw-rr 106448 2008-08-15 21:53:43 env/XDDCOM.py
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:11 lib/
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:11 lib/python2.3/
STDOUT: extracting: -rw-rr 6867 2008-08-15 19:51:15 lib/python2.3/optlib.py
STDOUT: extracting: -rwxr-xr-x 135234 2008-08-15 19:51:15 lib/python2.3/pyexpat.pyd
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:11 lib/python2.3/sdb/
STDOUT: extracting: -rw-rr 14852 2008-08-15 19:51:15 lib/python2.3/sdb/dbapi.py
STDOUT: extracting: -rwxr-xr-x 507904 2008-08-15 21:54:03 lib/python2.3/sdb/dbm.pyd
STDOUT: extracting: -rwxr-xr-x 487424 2008-08-15 21:54:07 lib/python2.3/sdb/loader.pyd
STDOUT: extracting: -rwxr-xr-x 475136 2008-08-15 21:54:15 lib/python2.3/sdb/sql.pyd
STDOUT: extracting: -rw-rr 208 2008-08-15 19:51:15 lib/python2.3/sdb/__init__.py
STDOUT: extracting: -rwxr-xr-x 61503 2008-08-15 19:51:15 lib/python2.3/zlib.pyd
STDOUT: extracting: -rwxr-xr-x 49218 2008-08-15 19:51:15 lib/python2.3/_socket.pyd
STDOUT: extracting: -rwxr-xr-x 57407 2008-08-15 19:51:15 lib/python2.3/_sre.pyd
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:11 misc/
STDOUT: extracting: -rw-rr 2437 2008-08-16 00:38:45 misc/create_demo_db.cmd
STDOUT: extracting: -rw-rr 417 2008-08-16 00:38:45 misc/drop_demo_db.cmd
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:17 pgm/
STDOUT: extracting: -rwxr-xr-x 200704 2008-08-15 21:52:15 pgm/backup.exe
STDOUT: extracting: -rwxr-xr-x 380928 2008-08-15 20:10:53 pgm/cons.exe
STDOUT: extracting: -rwxr-xr-x 45056 2008-08-15 20:10:33 pgm/cr_param.exe
STDOUT: extracting: -rwxr-xr-x 940032 2008-08-15 19:51:15 pgm/dbghelp.dll
STDOUT: extracting: -rwxr-xr-x 299008 2008-08-15 21:49:01 pgm/dbmreg.exe
STDOUT: extracting: -rwxr-xr-x 454656 2008-08-15 21:49:37 pgm/dbmshm.exe
STDOUT: extracting: -rwxr-xr-x 2105344 2008-08-15 21:48:31 pgm/dbmsrv.exe
STDOUT: extracting: -rwxr-xr-x 1843200 2008-08-15 21:49:17 pgm/dbmsrvscd.exe
STDOUT: extracting: -rwxr-xr-x 299008 2008-08-15 21:48:49 pgm/dbmstart.exe
STDOUT: extracting: -rwxr-xr-x 299008 2008-08-15 21:48:53 pgm/dbmstop.exe
STDOUT: extracting: -rwxr-xr-x 299008 2008-08-15 21:49:05 pgm/dbmunreg.exe
STDOUT: extracting: -rwxr-xr-x 69632 2008-08-16 00:15:35 pgm/dbpinstall.dll
STDOUT: extracting: -rwxr-xr-x 1073152 2008-08-15 20:33:23 pgm/diagnose.exe
STDOUT: extracting: -rwxr-xr-x 7258112 2008-08-15 21:48:17 pgm/kernel.exe
STDOUT: extracting: -rwxr-xr-x 118784 2008-08-15 20:25:15 pgm/libhsscopy.dll
STDOUT: extracting: -rwxr-xr-x 1204224 2008-08-16 00:11:25 pgm/liboms.dll
STDOUT: extracting: -rwxr-xr-x 159744 2008-08-16 00:16:23 pgm/libsqlcls.dll
STDOUT: extracting: -rwxr-xr-x 1191936 2008-08-16 00:17:23 pgm/libSQLDBC.dll
STDOUT: extracting: -rwxr-xr-x 1269760 2008-08-16 00:20:23 pgm/libSQLDBC_C.dll
STDOUT: extracting: -rwxr-xr-x 3022848 2008-08-15 22:01:27 pgm/lserver.exe
STDOUT: extracting: -rwxr-xr-x 20545 2008-08-15 19:51:15 pgm/pysapdb.exe
STDOUT: extracting: -rwxr-xr-x 974915 2008-08-15 19:51:15 pgm/python23.dll
STDOUT: extracting: -rw-rr 2071185 2008-08-15 19:51:15 pgm/python23.zip
STDOUT: extracting: -rwxr-xr-x 45056 2008-08-15 20:10:31 pgm/renparam.exe
STDOUT: extracting: -rwxr-xr-x 294912 2008-08-15 20:11:51 pgm/service.exe
STDOUT: extracting: -rwxr-xr-x 417792 2008-08-15 20:11:55 pgm/sqlinst.dll
STDOUT: extracting: -rwxr-xr-x 1359872 2008-08-15 20:11:59 pgm/sqlmsg.dll
STDOUT: extracting: -rwxr-xr-x 319488 2008-08-15 20:11:01 pgm/stop.exe
STDOUT: extracting: -rwxr-xr-x 319488 2008-08-15 20:10:57 pgm/strt.exe
STDOUT: extracting: -rwxr-xr-x 98304 2008-08-15 22:11:33 pgm/StudioUtil.dll
STDOUT: extracting: -rwxr-xr-x 49152 2008-08-15 20:25:11 pgm/sysrc.exe
STDOUT: extracting: -rwxr-xr-x 73728 2008-08-15 20:11:57 pgm/systemrc.exe
STDOUT: extracting: -rwxr-xr-x 229376 2008-08-15 22:11:43 pgm/TableDefC.dll
STDOUT: extracting: -rwxr-xr-x 45056 2008-08-15 21:53:29 pgm/Tools_WinEvtLog.dll
STDOUT: extracting: -rwxr-xr-x 73728 2008-08-15 22:01:47 pgm/tracesort.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:17 sap/
STDOUT: extracting: -rw-rr 147 2008-08-15 19:51:15 sap/dbpinstall.lst
STDOUT: extracting: -rw-rr 761 2008-08-15 21:50:29 sap/grantxdb.dbm
STDOUT: extracting: -rwxr-xr-x 18192 2008-08-15 19:51:15 sap/lcinit.bat
STDOUT: extracting: -rwxr-xr-x 126976 2008-08-16 00:15:27 sap/lvcbench.dll
STDOUT: extracting: -rw-rr 89 2008-08-15 19:51:15 sap/saprfc.ini
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:44 pgm/
STDOUT: extracting: -rwxr-xr-x 14577664 2008-08-15 23:36:03 pgm/slowknl.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:45 Support/
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:00:57 Support/Mapfiles/
STDOUT: extracting: -rw-rr 505962 2008-08-15 21:51:00 Support/Mapfiles/backint.map
STDOUT: extracting: -rw-rr 661472 2008-08-15 20:10:53 Support/Mapfiles/cons.map
STDOUT: extracting: -rw-rr 121797 2008-08-15 20:10:32 Support/Mapfiles/cr_param.map
STDOUT: extracting: -rw-rr 1265024 2008-08-15 21:53:13 Support/Mapfiles/dbmevtdisp.map
STDOUT: extracting: -rw-rr 913124 2008-08-15 21:53:26 Support/Mapfiles/dbmevthndl_display.map
STDOUT: extracting: -rw-rr 918119 2008-08-15 21:53:36 Support/Mapfiles/dbmevthndl_winlog.map
STDOUT: extracting: -rw-rr 802618 2008-08-15 21:49:36 Support/Mapfiles/dbmshm.map
STDOUT: extracting: -rw-rr 3115022 2008-08-15 20:24:12 Support/Mapfiles/dbmsrv-clu.map
STDOUT: extracting: -rw-rr 3049582 2008-08-15 21:48:31 Support/Mapfiles/dbmsrv.map
STDOUT: extracting: -rw-rr 2607026 2008-08-15 21:49:16 Support/Mapfiles/dbmsrvscd.map
STDOUT: extracting: -rw-rr 78229 2008-08-16 00:15:35 Support/Mapfiles/dbpinstall.map
STDOUT: extracting: -rw-rr 1937316 2008-08-15 20:33:22 Support/Mapfiles/diagnose.map
STDOUT: extracting: -rw-rr 155915 2008-08-15 20:10:31 Support/Mapfiles/get_page.map
STDOUT: extracting: -rw-rr 11970292 2008-08-15 21:48:16 Support/Mapfiles/kernel.map
STDOUT: extracting: -rw-rr 191857 2008-08-15 20:25:15 Support/Mapfiles/libhsscopy.map
STDOUT: extracting: -rw-rr 2152785 2008-08-16 00:11:24 Support/Mapfiles/liboms.map
STDOUT: extracting: -rw-rr 259698 2008-08-16 00:16:22 Support/Mapfiles/libsqlcls.map
STDOUT: extracting: -rw-rr 1983758 2008-08-16 00:17:23 Support/Mapfiles/libSQLDBC.map
STDOUT: extracting: -rw-rr 2270630 2008-08-16 00:20:22 Support/Mapfiles/libSQLDBC_C.map
STDOUT: extracting: -rw-rr 3030264 2008-08-15 22:01:26 Support/Mapfiles/lserver.map
STDOUT: extracting: -rw-rr 241759 2008-08-16 00:15:26 Support/Mapfiles/lvcbench.map
STDOUT: extracting: -rw-rr 22799 2008-08-15 19:51:40 Support/Mapfiles/odbcreg.map
STDOUT: extracting: -rw-rr 437361 2008-08-15 21:52:10 Support/Mapfiles/pipe2file.map
STDOUT: extracting: -rw-rr 170094 2008-08-15 20:12:32 Support/Mapfiles/sapdbmscsex.map
STDOUT: extracting: -rw-rr 260595 2008-08-15 20:12:42 Support/Mapfiles/sapdbmscsman.map
STDOUT: extracting: -rw-rr 130593 2008-08-15 20:12:01 Support/Mapfiles/sapdbmscsres.map
STDOUT: extracting: -rw-rr 864387 2008-08-15 20:12:55 Support/Mapfiles/serv-clu.map
STDOUT: extracting: -rw-rr 573796 2008-08-15 20:12:57 Support/Mapfiles/service-clu.map
STDOUT: extracting: -rw-rr 545676 2008-08-15 20:11:50 Support/Mapfiles/service.map
STDOUT: extracting: -rw-rr 15115432 2008-08-15 23:36:03 Support/Mapfiles/slowknl.map
STDOUT: extracting: -rw-rr 674679 2008-08-15 20:11:54 Support/Mapfiles/sqlinst.map
STDOUT: extracting: -rw-rr 138012 2008-08-15 19:55:01 Support/Mapfiles/sqlver.map
STDOUT: extracting: -rw-rr 137724 2008-08-15 19:55:00 Support/Mapfiles/sqlwhat.map
STDOUT: extracting: -rw-rr 100215 2008-08-16 00:05:33 Support/Mapfiles/sql_run.map
STDOUT: extracting: -rw-rr 126593 2008-08-15 20:25:11 Support/Mapfiles/sysrc.map
STDOUT: extracting: -rw-rr 205806 2008-08-15 20:11:57 Support/Mapfiles/systemrc.map
STDOUT: extracting: -rw-rr 329621 2008-08-15 22:11:43 Support/Mapfiles/TableDefC.map
STDOUT: extracting: -rw-rr 180003 2008-08-15 22:01:47 Support/Mapfiles/tracesort.map
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:01:45 symbols/
STDOUT: extracting: -rw-rr 1199104 2008-08-15 21:51:00 symbols/backint.pdb
STDOUT: extracting: -rw-rr 2092032 2008-08-15 20:10:53 symbols/cons.pdb
STDOUT: extracting: -rw-rr 281600 2008-08-15 20:10:32 symbols/cr_param.pdb
STDOUT: extracting: -rw-rr 3836928 2008-08-15 21:53:13 symbols/dbmevtdisp.pdb
STDOUT: extracting: -rw-rr 3058688 2008-08-15 21:53:26 symbols/dbmevthndl_display.pdb
STDOUT: extracting: -rw-rr 3083264 2008-08-15 21:53:36 symbols/dbmevthndl_winlog.pdb
STDOUT: extracting: -rw-rr 2485248 2008-08-15 21:49:36 symbols/dbmshm.pdb
STDOUT: extracting: -rw-rr 8563712 2008-08-15 20:24:12 symbols/dbmsrv-clu.pdb
STDOUT: extracting: -rw-rr 8391680 2008-08-15 21:48:30 symbols/dbmsrv.pdb
STDOUT: extracting: -rw-rr 7703552 2008-08-15 21:49:15 symbols/dbmsrvscd.pdb
STDOUT: extracting: -rw-rr 420864 2008-08-16 00:15:35 symbols/dbpinstall.pdb
STDOUT: extracting: -rw-rr 4803584 2008-08-15 20:33:21 symbols/diagnose.pdb
STDOUT: extracting: -rw-rr 338944 2008-08-15 20:10:31 symbols/get_page.pdb
STDOUT: extracting: -rw-rr 36047872 2008-08-15 21:48:12 symbols/kernel.pdb
STDOUT: extracting: -rw-rr 470016 2008-08-15 20:25:15 symbols/libhsscopy.pdb
STDOUT: extracting: -rw-rr 5868544 2008-08-16 00:11:24 symbols/liboms.pdb
STDOUT: extracting: -rw-rr 1264640 2008-08-16 00:16:21 symbols/libsqlcls.pdb
STDOUT: extracting: -rw-rr 4713472 2008-08-16 00:17:22 symbols/libSQLDBC.pdb
STDOUT: extracting: -rw-rr 5180416 2008-08-16 00:20:21 symbols/libSQLDBC_C.pdb
STDOUT: extracting: -rw-rr 7171072 2008-08-15 22:01:25 symbols/lserver.pdb
STDOUT: extracting: -rw-rr 642048 2008-08-16 00:15:26 symbols/lvcbench.pdb
STDOUT: extracting: -rw-rr 1207296 2008-08-15 21:52:10 symbols/pipe2file.pdb
STDOUT: extracting: -rw-rr 3058688 2008-08-15 20:12:32 symbols/sapdbmscsex.pdb
STDOUT: extracting: -rw-rr 1002496 2008-08-15 20:12:42 symbols/sapdbmscsman.pdb
STDOUT: extracting: -rw-rr 330752 2008-08-15 20:12:01 symbols/sapdbmscsres.pdb
STDOUT: extracting: -rw-rr 2739200 2008-08-15 20:12:55 symbols/serv-clu.pdb
STDOUT: extracting: -rw-rr 2141184 2008-08-15 20:12:56 symbols/service-clu.pdb
STDOUT: extracting: -rw-rr 1944576 2008-08-15 20:11:50 symbols/service.pdb
STDOUT: extracting: -rw-rr 40643584 2008-08-15 23:35:57 symbols/slowknl.pdb
STDOUT: extracting: -rw-rr 2321408 2008-08-15 20:11:54 symbols/sqlinst.pdb
STDOUT: extracting: -rw-rr 2075648 2008-08-16 00:05:31 symbols/sqlrun.pdb
STDOUT: extracting: -rw-rr 306176 2008-08-15 19:55:01 symbols/sqlver.pdb
STDOUT: extracting: -rw-rr 306176 2008-08-15 19:55:00 symbols/sqlwhat.pdb
STDOUT: extracting: -rw-rr 248832 2008-08-16 00:05:33 symbols/sql_run.pdb
STDOUT: extracting: -rw-rr 2214912 2008-08-15 20:12:51 symbols/start-clu.pdb
STDOUT: extracting: -rw-rr 2206720 2008-08-15 20:12:52 symbols/stop-clu.pdb
STDOUT: extracting: -rw-rr 306176 2008-08-15 20:25:10 symbols/sysrc.pdb
STDOUT: extracting: -rw-rr 388096 2008-08-15 20:11:57 symbols/systemrc.pdb
STDOUT: extracting: -rw-rr 846848 2008-08-15 22:11:43 symbols/TableDefC.pdb
STDOUT: extracting: -rw-rr 887808 2008-08-15 22:01:47 symbols/tracesort.pdb
STDOUT: checking unpacked archive... MSG: check file "Support/Mapfiles/diagnose.map": ok
MSG: check file "doc/FirstSteps/ODBC/HowToODBC.html": ok
MSG: check file "lib/python2.3/_socket.pyd": ok
MSG: check file "Support/Mapfiles/get_page.map": ok
MSG: check file "pgm/dbmsrv.exe": ok
MSG: check file "env/INFO.py": ok
MSG: check file "symbols/dbmsrv-clu.pdb": ok
MSG: check file "pgm/diagnose.exe": ok
MSG: check file "symbols/cons.pdb": ok
MSG: check file "misc/create_demo_db.cmd": ok
MSG: check file "symbols/sapdbmscsres.pdb": ok
MSG: check file "symbols/cr_param.pdb": ok
MSG: check file "Support/Mapfiles/dbpinstall.map": ok
MSG: check file "lib/python2.3/sdb/__init__.py": ok
MSG: check file "symbols/dbmevthndl_winlog.pdb": ok
MSG: check file "symbols/libSQLDBC_C.pdb": ok
MSG: check file "bin/xtracesort.exe": ok
MSG: check file "bin/x_diagnose.exe": ok
MSG: check file "symbols/pipe2file.pdb": ok
MSG: check file "pgm/Tools_WinEvtLog.dll": ok
MSG: check file "symbols/dbmshm.pdb": ok
MSG: check file "pgm/cons.exe": ok
MSG: check file "sap/grantxdb.dbm": ok
MSG: check file "demo/tutoriallib.py": ok
MSG: check file "demo/HOTEL.py": ok
MSG: check file "symbols/liboms.pdb": ok
MSG: check file "env/cserv.pcf": ok
MSG: check file "Support/Mapfiles/TableDefC.map": ok
MSG: check file "lib/python2.3/_sre.pyd": ok
MSG: check file "pgm/service.exe": ok
MSG: check file "doc/FirstSteps/Python/HowToPython.html": ok
MSG: check file "doc/FirstSteps/ODBC/HelloMaxDB.c": ok
MSG: check file "Support/Mapfiles/libSQLDBC.map": ok
MSG: check file "doc/FirstSteps/Java/DemodbData.java": ok
MSG: check file "sap/saprfc.ini": ok
MSG: check file "pgm/dbghelp.dll": ok
MSG: check file "cluster/strt_clu.exe": ok
MSG: check file "symbols/libhsscopy.pdb": ok
MSG: check file "symbols/dbmsrv.pdb": ok
MSG: check file "symbols/sapdbmscsman.pdb": ok
MSG: check file "cluster/SAPDBMSCSMan.exe": ok
MSG: check file "pgm/tracesort.exe": ok
MSG: check file "Support/Mapfiles/sqlinst.map": ok
MSG: check file "bin/sqlwhat.exe": ok
MSG: check file "lib/python2.3/pyexpat.pyd": ok
MSG: check file "pgm/libSQLDBC_C.dll": ok
MSG: check file "Support/Mapfiles/sapdbmscsman.map": ok
MSG: check file "Support/Mapfiles/sapdbmscsres.map": ok
MSG: check file "Support/Mapfiles/dbmevthndl_winlog.map": ok
MSG: check file "bin/x_python.exe": ok
MSG: check file "symbols/sql_run.pdb": ok
MSG: check file "pgm/python23.dll": ok
MSG: check file "env/SQLDBC.py": ok
MSG: check file "symbols/tracesort.pdb": ok
MSG: check file "cluster/SAPDBMSCSRes.dll": ok
MSG: check file "cluster/stop_clu.exe": ok
MSG: check file "pgm/sqlinst.dll": ok
MSG: check file "pgm/StudioUtil.dll": ok
MSG: check file "Support/Mapfiles/slowknl.map": ok
MSG: check file "doc/FirstSteps/Python/HelloMaxDB.py": ok
MSG: check file "symbols/lserver.pdb": ok
MSG: check file "Support/Mapfiles/serv-clu.map": ok
MSG: check file "pgm/cr_param.exe": ok
MSG: check file "bin/backint.exe": ok
MSG: check file "bin/sqlrun.dll": ok
MSG: check file "pgm/libSQLDBC.dll": ok
MSG: check file "Support/Mapfiles/kernel.map": ok
MSG: check file "symbols/kernel.pdb": ok
MSG: check file "bin/dbmsrvctl.exe": ok
MSG: check file "env/UDE.py": ok
MSG: check file "symbols/dbmsrvscd.pdb": ok
MSG: check file "symbols/sqlinst.pdb": ok
MSG: check file "doc/FirstSteps/Java/DemodbData.class": ok
MSG: check file "env/lsystab.py": ok
MSG: check file "sap/lcinit.bat": ok
MSG: check file "lib/python2.3/zlib.pyd": ok
MSG: check file "doc/FirstSteps/Perl/StateMaxDB.pl": ok
MSG: check file "pgm/python23.zip": ok
MSG: check file "doc/FirstSteps/Java/HelloMaxDB.class": ok
MSG: check file "symbols/dbmevtdisp.pdb": ok
MSG: check file "env/installib.py": ok
MSG: check file "pgm/renparam.exe": ok
MSG: check file "doc/FirstSteps/Python/StateMaxDB.py": ok
MSG: check file "env/TRIGGER.py": ok
MSG: check file "pgm/libhsscopy.dll": ok
MSG: check file "symbols/serv-clu.pdb": ok
MSG: check file "pgm/systemrc.exe": ok
MSG: check file "pgm/dbmunreg.exe": ok
MSG: check file "Support/Mapfiles/sysrc.map": ok
MSG: check file "Support/Mapfiles/libhsscopy.map": ok
MSG: check file "bin/dbmevtdisp.exe": ok
MSG: check file "doc/FirstSteps/ODBC/Makefile": ok
MSG: check file "Support/Mapfiles/dbmsrv-clu.map": ok
MSG: check file "pgm/stop.exe": ok
MSG: check file "Support/Mapfiles/service-clu.map": ok
MSG: check file "Support/Mapfiles/lserver.map": ok
MSG: check file "Support/Mapfiles/libsqlcls.map": ok
MSG: check file "symbols/backint.pdb": ok
MSG: check file "Support/Mapfiles/systemrc.map": ok
MSG: check file "symbols/get_page.pdb": ok
MSG: check file "lib/python2.3/sdb/sql.pyd": ok
MSG: check file "Support/Mapfiles/dbmsrv.map": ok
MSG: check file "env/APPS.py": ok
MSG: check file "env/kernprot.use": ok
MSG: check file "Support/Mapfiles/lvcbench.map": ok
MSG: check file "symbols/systemrc.pdb": ok
MSG: check file "symbols/sqlver.pdb": ok
MSG: check file "pgm/liboms.dll": ok
MSG: check file "cluster/service_clu.exe": ok
MSG: check file "env/ORADDSYN.py": ok
MSG: check file "Support/Mapfiles/backint.map": ok
MSG: check file "env/SYSINFOCOM.py": ok
MSG: check file "Support/Mapfiles/dbmevthndl_display.map": ok
MSG: check file "cluster/SAPDBMSCSEx.dll": ok
MSG: check file "pgm/slowknl.exe": ok
MSG: check file "symbols/slowknl.pdb": ok
MSG: check file "symbols/sqlwhat.pdb": ok
MSG: check file "symbols/TableDefC.pdb": ok
MSG: check file "doc/FirstSteps/SQLDBC/HelloMaxDB.cpp": ok
MSG: check file "env/CNR3DATA.py": ok
MSG: check file "doc/FirstSteps/index.html": ok
MSG: check file "doc/FirstSteps/Java/HowToJava.html": ok
MSG: check file "bin/pipe2file.exe": ok
MSG: check file "doc/FirstSteps/Perl/demodbData.pm": ok
MSG: check file "bin/dbmevthndl_winlog.exe": ok
MSG: check file "Support/Mapfiles/tracesort.map": ok
MSG: check file "symbols/lvcbench.pdb": ok
MSG: check file "demo/ltutorial.py": ok
MSG: check file "symbols/sapdbmscsex.pdb": ok
MSG: check file "bin/xservice.exe": ok
MSG: check file "doc/FirstSteps/Python/HelloMaxDB-API.py": ok
MSG: check file "symbols/libSQLDBC.pdb": ok
MSG: check file "env/REPOSITORY.py": ok
MSG: check file "Support/Mapfiles/cr_param.map": ok
MSG: check file "lib/python2.3/optlib.py": ok
MSG: check file "cluster/serv_clu.exe": ok
MSG: check file "symbols/sysrc.pdb": ok
MSG: check file "env/ORADDCOM.py": ok
MSG: check file "doc/FirstSteps/SQLDBC/Makefile": ok
MSG: check file "pgm/dbmsrvscd.exe": ok
MSG: check file "symbols/diagnose.pdb": ok
MSG: check file "pgm/TableDefC.dll": ok
MSG: check file "doc/FirstSteps/Perl/HowToPerl.html": ok
MSG: check file "Support/Mapfiles/sqlwhat.map": ok
MSG: check file "symbols/stop-clu.pdb": ok
MSG: check file "cluster/dbmsrv_clu.exe": ok
MSG: check file "pgm/sysrc.exe": ok
MSG: check file "pgm/kernel.exe": ok
MSG: check file "Support/Mapfiles/sql_run.map": ok
MSG: check file "doc/FirstSteps/Java/StateMaxDB.class": ok
MSG: check file "Support/Mapfiles/dbmsrvscd.map": ok
MSG: check file "symbols/service-clu.pdb": ok
MSG: check file "symbols/dbmevthndl_display.pdb": ok
MSG: check file "Support/Mapfiles/odbcreg.map": ok
MSG: check file "env/SAPDBLOADER.py": ok
MSG: check file "bin/sqlver.exe": ok
MSG: check file "env/general.use": ok
MSG: check file "sap/dbpinstall.lst": ok
MSG: check file "pgm/dbpinstall.dll": ok
MSG: check file "doc/FirstSteps/Java/StateMaxDB.java": ok
MSG: check file "env/en/DBM.en": ok
MSG: check file "sap/lvcbench.dll": ok
MSG: check file "pgm/lserver.exe": ok
MSG: check file "env/getpackages.py": ok
MSG: check file "env/lapps.py": ok
MSG: check file "Support/Mapfiles/dbmshm.map": ok
MSG: check file "Support/Mapfiles/service.map": ok
MSG: check file "misc/drop_demo_db.cmd": ok
MSG: check file "lib/python2.3/sdb/dbm.pyd": ok
MSG: check file "env/WA.py": ok
MSG: check file "symbols/dbpinstall.pdb": ok
MSG: check file "bin/ireport.py": ok
MSG: check file "Support/Mapfiles/sapdbmscsex.map": ok
MSG: check file "Support/Mapfiles/libSQLDBC_C.map": ok
MSG: check file "Support/Mapfiles/liboms.map": ok
MSG: check file "lib/python2.3/sdb/dbapi.py": ok
MSG: check file "doc/FirstSteps/Java/HelloMaxDB.java": ok
MSG: check file "env/ORADDV.py": ok
MSG: check file "doc/FirstSteps/maxdbenv.cmd": ok
MSG: check file "pgm/pysapdb.exe": ok
MSG: check file "pgm/libsqlcls.dll": ok
MSG: check file "env/GARBAGE.py": ok
MSG: check file "symbols/libsqlcls.pdb": ok
MSG: check file "bin/xkernprot.exe": ok
MSG: check file "Support/Mapfiles/dbmevtdisp.map": ok
MSG: check file "env/SYSINFO.py": ok
MSG: check file "symbols/sqlrun.pdb": ok
MSG: check file "env/XDDCOM.py": ok
MSG: check file "bin/sdbfill.exe": ok
MSG: check file "lib/python2.3/sdb/loader.pyd": ok
MSG: check file "env/XDD.py": ok
MSG: check file "doc/FirstSteps/SQLDBC/HowToSQLDBC.html": ok
MSG: check file "pgm/backup.exe": ok
MSG: check file "env/ODBC.py": ok
MSG: check file "Support/Mapfiles/pipe2file.map": ok
MSG: check file "Support/Mapfiles/cons.map": ok
MSG: check file "pgm/dbmshm.exe": ok
MSG: check file "env/SYSDBA.py": ok
MSG: check file "env/CNR3TAB.py": ok
MSG: check file "env/ORADD.py": ok
MSG: check file "env/PRECOM.py": ok
MSG: check file "pgm/strt.exe": ok
MSG: check file "cluster/sapdbmscsman.dll": ok
MSG: check file "Support/Mapfiles/sqlver.map": ok
MSG: check file "env/DBANA.py": ok
MSG: check file "env/SHOWCMD.py": ok
MSG: check file "pgm/dbmstop.exe": ok
MSG: check file "env/SYSDBACOM.py": ok
MSG: check file "symbols/start-clu.pdb": ok
MSG: check file "bin/dbmevthndl_display.exe": ok
MSG: check file "doc/FirstSteps/Python/demodbData.py": ok
MSG: check file "pgm/dbmstart.exe": ok
MSG: check file "env/DBMVIEWS.py": ok
MSG: check file "env/JDBC.py": ok
MSG: check file "pgm/sqlmsg.dll": ok
MSG: check file "pgm/dbmreg.exe": ok
MSG: check file "symbols/service.pdb": ok
STDOUT: ok
MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/index.html" modified by installer
MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Perl/HowToPerl.html" modified by installer
MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Python/HowToPython.html" modified by installer
MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/ODBC/HowToODBC.html" modified by installer
MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Java/HowToJava.html" modified by installer
MSG: file "c:/program files/sdb/maxdb1/misc/create_demo_db.cmd" modified by installer
MSG: file "c:/program files/sdb/maxdb1/misc/drop_demo_db.cmd" modified by installer
MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/maxdbenv.cmd" modified by installer
SYS: "C:Program FilessdbMAXDB1 indbmsrvctl.exe" start
SYS: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": ERR
SYS: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": -24913,ERR_SERVICEDB: Cannot register service database instance for C:Program FilesSDBMAXDB1
STDERR: error occured while executing "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1"
STDERR: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": ERR
"C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": -24913,ERR_SERVICEDB: Cannot register service database instance for C:Program FilesSDBMAXDB1
STDERR: installation exited abnormally at Fr, Jan 09, 2009 at 18:17:25
MSG: packagedata of package Redist Python changed
MSG: writing 4 packages
MSG: net install registry size = 40263 bytes
MSG: wrote install registry (46259 bytes)
STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBRDPY.TGZ"
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:04:43 bin/
STDOUT: extracting: -rwxr-xr-x 331776 2008-08-15 21:53:55 bin/x_python.exe
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:04:43 lib/
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:04:44 lib/python2.3/
STDOUT: extracting: -rw-rr 6867 2008-08-15 19:51:15 lib/python2.3/optlib.py
STDOUT: extracting: -rwxr-xr-x 135234 2008-08-15 19:51:15 lib/python2.3/pyexpat.pyd
STDOUT: extracting: drwxr-xr-x 0 2008-08-16 01:04:43 lib/python2.3/sdb/
STDOUT: extracting: -rwxr-xr-x 507904 2008-08-15 21:54:03 lib/python2.3/sdb/dbm.pyd
STDOUT: extractiHI there,
it really does look like as the "uninstallation" was done by merely deleting files from the filesystem.
This will always lead to problems when you try to re-install a MaxDB afterwards.
Uninstallations should be done via SDBUNIST to avoid such issues.
Based on the error messages like:
getRelease():C:/Program Files/SDB/MAXDB1/pgm/kernel.exe not found
MSG: migrate server installation data for INSTROOT "c:/program files/sdb/maxdb1"
MSG: installed package is flaged as invalid => skipping update check
WRN: cannot execute command: xregcomp -u "c:program filessdbmaxdb1pgmdbpinstall": cannot create process, Le fichier spÈcifiÈ est introuvable.
>WRN: cannot execute command: xregcomp -u "c:program filessdbprogramsliblivecachedbg": cannot create process, Le fichier spÈcifiÈ est introuvable.
we can tell: the MaxDB installation registration had not been deleted correctly.
If I'd to guess, I'd say you just deleted whatever was in the folder "c:program filessdb" and crossed fingers that this would do.
Anyhow, on this system, due to the usage of non-SAP-standard folder layout check this one, the installation registration can by found in the all users data folder:
>MSG: Template set indep data path to "c:/documents and settings/all users/application data/sdb/data"
This would have to be removed as well.
Anyhow, maybe you want to read the documentation before messing up your system by try and error:
Installation Manual
regards,
Lars -
Trying to configure a Win 2003 Server to use TLS server authentication . . .
I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy -
Error after upgrading from 10.2.0.1 to 10.2.0.2 on Win 2003 server
Hi,
I just upgrade oracle 10.2.0.1 on Win 2003 server(32-bit) to 10.2.0.2. The installation seemed to be successful. (no errors) utlrp.sql ran ok as well. However, when I tried to start the upgraded database, I got the following error:
SQL> startup
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1289064 bytes
Variable Size 96470168 bytes
Database Buffers 188743680 bytes
Redo Buffers 7098368 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Any ideas?
Thank you very much for your help.Looks like, you have only upgraded Oracle Software from 10.2.0.1 to 10.2.0.2. After that, immediately you are trying to bring the DB up. In that case you will receive an error "ORA-01092: ORACLE instance terminated. Disconnection forced".
Did you upgrade your 10.2.0.1 Database after the software upgrade? I mean did you execute the following steps.
SQL> STARTUP UPGRADE;
SQL> SPOOL patch.log
SQL> @?/rdbms/admin/catupgrd.sql
SQL> SPOOL OFF
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP;
SQL> @?/rdbms/admin/utlrp.sql
If not please execute them, and also follow the README document of the patch carefully.
Regards,
Sabdar Syed,
http://sabdarsyed.blogspot.com/ -
Oracle 9i release 2 for Win 2003 Server 32 bit
From the Oracle download site, do I need to download Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP 32 bit before administering the Release 2 for Win 2003 Server. (approx. 180 Meg)
Interesting. I've been using APEX 3.2 with Firefox 3.5 for several months now without any issues and I know several other developers doing the same. Can you test it from another client machine to see if it's something with the PC or the install of Firefox? You might also try [a href="http://portableapps.com/apps/internet/firefox_portable"]Firefox 3.5 Portable[a], as it will basically give you a clean, fresh install of 3.5 without uninstalling your current 3.5. Just make sure you close all instances of Firefox before you start up the portable one.
On a totally unrelated note, just wanted to make sure you know the 9.2 is no longer a supported database (unless you pay for extended support) and the upcoming 4.0 release of APEX will not work with 9.2 at all.
Tyler Muth
http://tylermuth.wordpress.com -
Visual Composer is not running on Win 2003 Server
Hi,
after installing Visual Composer on a Win 2003 Server (with applying OSS note 804496).
The analyzer from note 772559 do not notice errors.
But I get a HTTP Error 403 - Forbidden: Access es denied --> You are not authorized to view this page.
It is a Test system and I have allowed all I can, but it is not working.
Does somebody have an idea why I got this error message? Do I have to configure something that is not described in the Installation Guide?Hi Ignacio,
I did not change the file. I use the same on a Win2000 Server and it's working there.
By the way, the URL http://ep-tst/vcserver/~server.ini is working, so it could not be a permission problem, could it?
The default.htm is the default page in the VCServer directory..."http://ep-tst/VCServer/default.htm" is not working, too.
And the title shows "Loading... - Microsoft IE".
Do you have an other idea?
Thanks&Regards,
Mathias -
User Unable to RDP in Win 2008R2 Due to Multiple Group Membership But Can RDP in Win 2003 Server
We have built a new application server with Windows 2008R2 where set of users are local admin (application owners) and we have same kind of application server
in Windows 2003 SP2 with same users as local admin.
Now in Windows 2008R2 servers these local admins are unable
to RDP and get ACCESS
DENIED whenever user tries to login but can login successfully in 2003 server.
Now, strange case is, I found these admin users group membership with more than 600 groups and they are able to login win 2008 server as well if I remove their
group membership to a minimum level say around 300.
This is so confusing for me as user can login in WIn 2003 server with highest group membership but not in WIn 2008.
We have applied Maxtoken registry also through GPO.
Any idea what are we missing here.This has nothing to do with Directory Services so I will move to the General forum.
One thing to look at is to make sure that you have RDP enabled on these new 2012 servers.
http://winplat.net/post/2012/07/16/How-to-enable-Remote-Desktop-on-Windows-%E2%80%988%E2%80%99.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights. -
Is XI available on Win 2003 Server
Hi,
Does anyone know if XI Runtime installation is available on Win 2003 Server ?
The PAM shows that the database for SQLServer is available on Win 2003. However, it does not mention about the ABAP and J2EE stacks.
Any information appreciated.XI is an "Add-on" to Web AS 6.40, and Web AS 6.40 can run on Win2k3. I just installed one on win2k3 the week before, and it is still running well!
If you use SQL server, make sure you read note 600027.
Regards,
Hart -
Error Installing EBS R12 - Win 2003 Server Standard R2
Hi Experts,
This is my 8th try to install EBS R12 and got same error.
OS - Win 2003 Server Standard R2.
used CYGWIN, MS Visual C++ 2010 and Strawberry Perl.
Used Oracle E-Business Suite R12 Installation Steps on Windows XP followed all steps......finally same error......
http://www.mediafire.com/?najx7zk8zl780x8
in the above link I added all th screen shots and some logfiles.
1. Can I use MS Visual C++ 2010??
2. Can I use Strawberry Perl?
Can any one please help me........Please let me know if you need any additional info or any other log files........
Thanks,
DK1. Can I use MS Visual C++ 2010??You can use either Microsoft Visuall Studio 2005/2008 only.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
2. Can I use Strawberry Perl?Yes, as long as you installed the required version (or above).
Can any one please help me........Please let me know if you need any additional info or any other log files........I have checked the log files and I see that you get the same error you had in your other thread. Were you able to run md5sum to verify the integrity of the stage area directory?
Thanks,
Hussein -
Win 2003 server SATA2 RAID 0 install errors
I keep getting the following error when trying to install Win 2003 server, as it is loading drivers:
"The file iaStor.sys is corrupted.
Press any key to continue."
Note: I get this error on every copy of win2003 server that I have AND I get it when trying to F6 install Intel's SATA RAID drivers from floppy, so it isn't really a corrupt file.
So I continue on and finally when trying to load windows it says something about windows not detecting any harddrives. Well, bios sees them fine. The ROM Intel Matrix Storage Manager sees them fine. I have all 3 drives set on one volume in Intel Matrix Storage Manager for a total of 698.7GB's. If I change to SATA Mode IDE the BIOS sees them fine.
I have the following relevant BIOS settings:
SATA Mode RAID (I've tried all 3 settings with no luck)
SATA Post speed setting DISABLED (I've tried Force Gen2 to no avail, and yes the HD jumpers are off so it runs at a full 3gbs)
JMB361 Disabled (I don't have anything on SATA port 5)
I've messed around with practically every possible combination of settings and am at a complete loss here as to what I should do to get this thing working. I've even tried skipping RAID completely. I've read through the (confusing) mobo instructions multiple times and just don't see what I am missing here. =/ Any help would be greatly appreciated! TY! See profile for hardware specs.Well, you can only find out by re-installing the system with SBE 2003 again and if it doesn't works, you've got to install SBS 2003 back...
It depends on how you want to play the game. A shot that may help you or burden you . -
i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,
If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time . -
Gigabith connections tiger vs win 2003 server
In my gigabith (certifyd category 6) network I have numerous problems to transfer files from Mac with Tiger 10.4.4 to win 2003 server. After to me it are connected the copy of files leaves correctly, with good speed (40-50MB/sec), but when little lack MB (1/10MB) the connection is slowed down (10-300Kb/sec), and often it is closed with ERROR -36. I have the same problem with 8 G5 and whith SMB or AFP.
Any assistance you could lend would be greatly appreciated, thanks in advance.we are having the same exact problems. Our Macs are bound to Active Directory and connected via Gigabit. This is happening on machines with 10.3.x - 10.4.5. We authenticate fine, connect to servers fine and transfer speeds are great up until the last bit of the file. It hangs for a few minutes and either makes it or we get disconnected with a -36 error. In Console I keep seeing this:
Feb 20 12:02:47 username kernel[0]: smbiodrecvall: drop resp: mid 14758, cmd 5
Feb 20 12:02:47 username kernel[0]: smbiodrecvall: drop resp: mid 14766, cmd 5
Feb 20 12:02:47 username kernel[0]: smbiodrecvall: drop resp: mid 14774, cmd 5
This one is hard for us to pin down because we just moved facilities so we have new HP gigabit switches, cabling and our domain controllers were updated to Windows 2003. -
Install 16 bit Oracle client on Win 2003 server
Hello,
Is it possible to install Oracle SQL* Net 2.3(16 bit) Client on Windows 2003 server. If it is then could someone give me links from where I could get more information on this (like the steps to install 16 bit Oracle client on Win 2003).
Thanks.the 16-bit applications are not supported by Windows 2003 server x64 edition.
http://support.microsoft.com/?kbid=896458&SD=tech
I have never tried to use 16-bit SQLNet client on Windows 2003 x86. I'm pretty sure that this combination will not be supported by Oracle , athough it could work.
As far as I remember the 2.3 client was shipped with the Oracle 7.3.
here is the desupport notice for Oracle 7
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=66409.1
Mike -
What's the fastest way to copy 151GB, 375000 files from win 2003 server to win 2008 server
Non techie here.
I have a project where I need to get 151GB of data spread over 375000+ files moved from a win 2003 FAP to a 2008 server. Copy, xCopy, Robocopy all take in excess of 50hours to move it to an external HDD. Has to be external move for security reasons.
I have 40 hours max to get it off and onto the new server.
Cheers
IanI copied over 12TB in 24 hours using the method below. A lot of this depends on your infrastructure. The scripts I used are unmodified for your case. I suggest you give them a look and understand the process and change it to fit your needs.
There are 2 parts. The first is a Main script that schedules PowerShell jobs that actually do the work. The main script will read a file called JobCount every loop to see how many jobs it can run at one time, the reason I did this was to change the number
of jobs depending on Day (production) times and Night times. Also, the Main loop reads a nomig file that tells the script, don't move these folders because they were our test cases, you can even do test cases during the migration since you can modify the file
while the script is running. The example was use to move thousands of home folders. Using Robocopy if you tell a single command to do everything, it will take hours to start, just looking around. If you do one root folder at a time, it will run much faster
which is the reason I created this. If you have a small number root folders, you may want to point it at folders where you do have a lot of subs, remember you can have more than one main process running in different runspaces.
Main Script
VVVVVVVVVV
$homeOld = (Get-ChildItem -Path \\server\share | select name)
$JobRun = 10
$i = 0
$Count = $homeOld.Count
foreach ($homeDir in $homeOld) {
$i = $i + 1
$Sdir = $homeDir.Name
Write-Progress -Activity "Migrating Homes" -Status "Processing $i of $Count" -PercentComplete ($i/$homeOld.Count*100) -CurrentOperation "Next to Process $Sdir"
$not = gc \\serverl\share\script\nomig.txt -ErrorAction "Stop"
$JobRun = gc \\server\share\script\jobcount.txt -ErrorAction "Stop"
if ($not -notcontains ($homeDir.Name).ToLower()) {
While ((Get-Job -State "Running").Count -gt ($JobRun-1)) {
Start-Sleep -Seconds 3
if ((Get-Job -State "Completed").Count -gt 0) {
$Comp = Get-Job -State "Completed"
foreach ($Job in $Comp) {
$outfile = $Job.name + ".txt"
Receive-Job -Job $Job | Out-File -FilePath "\\server\share\verify\$outfile"
Remove-Job -Job $Job}
Start-Job -Name $Sdir -ArgumentList "\\server\share\$Sdir", "\\newserver\share\$Sdir", "/COPYALL", "/MIR", "/W:1", "/R:1", "/MT:5" -FilePath \\server\share\script\robothread.ps1 > $null
else {
Write-Host $HomeDir.Name " Excluded" -ForegroundColor Green
=====
Thread Script - where Robocopy does the work.
VVVVVVVVV
& robocopy $args[0] $args[1] $args[2] $args[3] $args[4] $args[5] $args[6]
============
This comes with no warranty, it is just an idea I used to do a very fast copy with permissions and all attributes, where no other method was useable.
Thanks,
Allan
Allan
Maybe you are looking for
-
Firefox as plan B - just in case of unsatisfying ux
We are on planning our migration from Windows to Maverick. For several applications there is a plan B in preparation. Just in case the given and Maverick included of current build software does not enable satisfying productivity. The lack of producti
-
Need help identifying vocal effect
Hello! I am a huge fan of obscure British 60's psychedelic and have been trying to mimic the vocal effects used on this song. I'm guessing it would be a combination of delay through a Leslie speaker but seem to not be able to achieve the same results
-
Artwork Issues. I know. Not very uncommon.
Ok so I upgraded to iTunes 7. I have added many albums since, and with the new feature have added all the album artwork. Now when I updated my ipod I still had the artwork I had before, but all the new stuff I've added since the update won't display
-
Can someone please tell me what I need to do to use my AppleCare to replace my charger? And if I don't have my AppleCare info but have the email from when I activated it, is that all I need?
-
Using single repository for Customer and Vendor
Hi All Has anyone worked in scenario where a single repository was used to store both Customer and Vendor records? The source and Target systems are SAP ECC and MDM will have both Basic as well as contextual data. I would like to know the likely chal