Sap R/3 4.6c and BW 3.0b installation snapshot steps both on one server
hi gurus,
i want to install R/3 4.6c and BW 3.0b on to my laptop
my laptop configuration is
2bg RAM
160 HDD
Intel centrino Duo mobile 1.66ghz processor
i also need the connectivity steps to be working between R/3 and BW for me to extract data from R/3.
please email me at = [email protected]
I will assign the points
Thanks in advance.
sam
You will be able to install both but system will be very slow.
check both installation guides at http://service.sap.com/INSTGUIDES or on installation CD. you have prerequisites explained in those guides.
when you install those systems, decrease the number of dialog work processes to a small value such as 6.
Similar Messages
-
Sap R/3 4.6c and BW 3.0b installation snapshot steps both on one laptop
hi gurus,
i want to install R/3 4.6c and BW 3.0b on to my laptop
my laptop configuration is
2bg RAM
120 HDD
Intel centrino Duo mobile 1.66ghz processor
i also need the connectivity steps to be working between R/3 and BW for me to extract data from R/3.
please email me at = [email protected]
I will assign the points
Thanks in advance.
samYou will be able to install both but system will be very slow.
check both installation guides at http://service.sap.com/INSTGUIDES or on installation CD. you have prerequisites explained in those guides.
when you install those systems, decrease the number of dialog work processes to a small value such as 6. -
How to import the SAP R/3' rfc's and Idoc's in to the integration repositor
Hi all,
One of my friend who is practicing with SAP XI software. He installed SAP XI and SAP R/3(using the VmwareWorkstation ) in single system. What i have seen that is,
Left side we can see(IR) the software component version's and namespaces. Under namespaces we can see imported objects. If we right click on the imported objects then it will show import of SAP objects.
Then it generally show SAP R/3 system name and client number(800) + input text parameters for the application server and system number.
But what it was showing that XI's system name and XI's client(100) number. Even i have entered SAP R/3 server name and system number and it's username and password. Then it was telling the corresponding client doesn't exist.
Please help me to solve this problem.check pg13 of the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Check this link to know minimum authorizations required for a user to import RFC/Idocs.
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
Message was edited by:
Prabhu S -
My brother and i both just bought iphones and want to know how we can both have one itunes account and share our music. our phones are on the same plan and i am paying for the bill. so my question is is this possible?
Yes. It is possible. Just sign in to your Apple ID on both of your iPhones in the App Store.
-
Excel Download of a Web SAP BW Report asks userid and password.please help
Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
PavanHi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal -
Integration of sap R/3 (4.7) and Microsoft active directory (2003)
Hi All,
I would like to know integration of sap R/3 (4.7) and Microsoft active directory (2003) and also SAP EP and Microsoft active directory. I have been working as a ep consultant with a local bank. I am new for this integration work, So please kindly provide me the steps for integrating these both directories.
Pls help me with this issue.
Thanks in advance,
Regards,
Raghav.Hi,
First You should read:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bc72b890-0201-0010-3a8d-e31e3e266893
Regards,
Jarek -
SAP R/3 4.7 and EWM of SCM 5.0 Integration
Hi,
Has anyone integrated SAP R/3 4.7 and EWM of SCM 5.0? It has got lot of issues in the following areas.
1. Master Data - Business Partners - Customers are transferred to EWM as locations with location type 1010. But it is not transferred as business partners.
2. Transactional Data - The QRFC is not working for inbound and outbound deliveries and the IDOC interface is not creating the delivery request at EWM.
3. Internal warehouse processes - The simple thing like physical inventory document is not created. For physical inventory document, the system is asking the business partner, responsible person to dispose, shipping office, etc...
The documentation is not that clear and it doesn't give any specifics.
The integration points are not well defined and there are lot of gray elements in the configuration.
Has anyone faced the similar issues?
If you have any inputs, please let me know.
Thanks for your input.
Regards,
SPHi SP,
I have not worked on any implementation projects as of now. Anyways, I am attempting to answer the questions posted by you as I work on EWM. I hope my answers help you.
1. Master Data -Business Partners - While CIFing the customers from R3 to EWM, choose the option "2 - Create Both" in CFM2 or CFM3 are then activate the model.
The option 2 will CIF the created customers as both Business Partners and as locations.
2. Not much idea on Idoc's. Can you please provide more info about the status of the inbound and outbound deliveries? This can help checking the QRFC.
3. Some settings to keep in mind while working with the internal Warehouse process - Physical Inventory
- Craete a PI area and assign the permitted document types.
- Assign this PI area to an activity area
- In the customizing Specify Physical-Inventory-Specific Settings in the Warehouse" - uncheck owner, part entiled to dispose and maintain the calender, fiscal year, currency.
I hope this is what you wanted as an answer.
Thanks & Best Regards,
Divya -
SAP R/3 4.7 and JRE 1.5
Hi ,
On our SAP r/3 4.7 server currently JRE1.4 is installed .
We recived a request to upgrade it to 1.5
Can you let us know if there is any dependecy between sap r/3 4.7 and JRE 1.5
Will it run without any issue.
Regards
MadhavHi Sunny ,
Thanks for the info .Just one more question does SAP Java connector 3.06 is supported by R/34.7?
I am unable to find any information regarding the same anywhere .
Only thing i found was that
SAP java connector Supports R/3 3.1I and higher (and other SAP Components that have BAPIs or RFMs).
It does not say anything about the version of SAP java connector.
Regards
Madhav -
Connect to SAP R/3 using JCA and SLD
I have read a number of articles and code samples regarding back-end connections, but none of them provided the answer which is suitable for my situation.
I want to build a portal application which calls a simple BAPI in a SAP R/3 system.
The only requirements are that the application has to be set up according to the MVC pattern and the model will be exposed as a webservice.
I am using web dynpro to create the views and tie the view, the controller and the model together. The model should connect to a SAP R/3 system accessing it via single sign on.
I want the connection properties to be easily ajustable to make the application portable to another landscape, therefore I chose JCA to set up the connection.
FYI: The SAP back-end systems are defined in the portal system landscape and also in the system landscape directory on the XI server.
Does anyone know a good code sample/tutorial/how-to for setting up a flexible, easy manageable connection to a SAP back-end system?thanks, I can get the data from SAP R/3 to crystal report.
but still dont know how to do the second question mentioned in previous message:
once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted. -
SAP R/3 4.7 and ECC 5.0
Hello MM gurus!
i would like to know differences between SAP r/3 4.7 and ECC 5.0, and what makes the client to opt of the 4.7 or ECC 5.0.
Thanks in Advance gurus.
Regards,
Pieadad.I am sorry for posting the question without searching properly. i got the answer for my question.
Regards,
Pieadad. -
Difference Between SAP ECC. 6.0 and 4.6c
Hi
What is the Difference Between SAP ECC. 6.0 and 4.6c
with respect to module wise, like SD, MM, FI,
thanks
SatishHi,
There is lot difference between 4.6c and 6.0
1) ecc 6.0 coming with inbuild webdynpro , BSP it is not 4.6c
2) In ecc we have interactive forms concept where it was not there in 4.6c
3) 4.6c there is no unicode concept here we have unicode and non unicode
You can follow the link also
difference between SAP 4.6C and SAP ECC6.0
Rgds,
Suman -
SAP Insider Conference on Reporting and BI - April 20-22, 2009
The first of five SAP Insider Conference semiars will be held next week, don't forget to register for the one closest to you!
SAP Insider Conference on Reporting and Business Intelligence with SAP and BusinessObjects
April 20-22, 2009 in Las Vegas, USA.
Other dates and locations include Orlando, Chicago, Boston and Frankfurt.
Registration and additional information including agendas and speakers can be found [here|http://www.biseminar.com/homepage.cfm?usergroup=us].Hi
I have access to nearly 10,000 SAP related industry presentations from various sources which I have been collecting over the years. I intend to provide links to the BI related presentations which are freely available. I have started with a post to this forum.
In regards to user group information in Australia I have been on the SAP Australian User Group executive for a number of years. SAP University Alliance members pay approximately $AUD500 annual membership for the user group. We have created best ERP student prizes ($500) for these university members so the membership dues are indirectly returned to the universities. It is up to each university to determine how they award these prizes. The best students are listed on the user group web site (www.saug.com.au). This encourages university membership in the user group and raises the profile of the user group with students. Approximately 50% of the university alliance members in Australia are members of the user group.
In addition I facilitate staff and students contact with member companies for the purpose of research. This tends to be in the format of interviews at our events rather than surveys.
We also utilise university staff at the user group events to conduct education sessions as a foundation to some of SAP's solutions. For example data mining 101, business process modelling 101, MRP 101. This brings academia and industry closer in the SAP ecosystem.
I hope this provides some ideas for the ASUG collaboration
Regards
Paul Hawking
SAP Academic Program Director
Victoria University
Australia -
ABAP differences of SAP R/3 4.6 and ECC 6.0
What are the ABAP differences of SAP R/3 4.6 and ECC 6.0?
Hi
Difference between version on functionalities you can find on the following link.
Give the source version (i.e. 4.6 C) and select the target version (i.e. ECC 6.0)
http://solutionbrowser.erp.sap.fmpmedia.com/
Please check this Release notes :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/content.htm
Check if this is helpfull
Short Difference between R/3 4.7, ECC5 & ECC6 !!!!!
1. SAP NetWeaver is SAP's technology platform. It has all of SAP's
technology in it. It is used to build and run SAP Applications and customer
applications (Application server, data warehouse, portal, coding, messaging,
etc). You can find more information on the SAP NetWeaver page on the SAP
Service Marketplace (http://service.sap.com/netweaver). Of course they is
also in on the SAP NetWeaver page in SDN.
2. ABAP is part of SAP NetWeaver. BW is part of SAP NetWeaver (as of
the 3.5release).
3. Prior to SAP NetWeaver, BW was a seperate product. It is shipped as part
of SAP NetWeaver since the SAP NetWeaver '04 release (SAP NetWeaver BI 3.5).
4. SAP ECC is part of the SAP ERP application (actually it is the minimal
installation of SAP ERP). SAP ERP runs on SAP NetWeaver. So when you get SAP
ERP you get SAP NetWeaver.
- SAP ECC 5.0 is part of SAP ERP 2004 [which runs on SAP NetWeaver '04]
- SAP ECC 6.0 is part of SAP ERP 6.0 (2005) [which runs on SAP
NetWeaver 7.0(2004s)]
5. SAP NetWeaver is delivered with SAP ERP so ABAP and the functional
modules are include in SAP ERP.
6. With SAP ERP (SAP ECC) you have a choice of activating BI within the SAP
ERP system or deploying in a seperate system. This is information is in the
SAP ERP master guides which can be found at
http://service.sap.com/instguides.
For SAP ERP 6.0 (ECC 6.0) it will the SAP NetWeaver 7.0 version of BI.
Also check
/thread/170347 [original link is broken]
The only difference between ECC5 and ECC6 is that additional components like mySAPCRM, mySAPPLM, mySAPSCM, mySAPSRM are added in ECC6.0. HR was already a part of ECC5.0.
http://abdurohman.wordpress.com/2007/06/29/whats-new-in-ecc5-and-ecc6-ecc7/
Reward if usefull -
SAP Portal Network - WebDynpro iView and SAP Application iView sharing
Hello All,
I've read about the restrictions in SAP Portal supporting the WSRP standard for application sharing. Mainly WebDynpro iViews and SAP application iViews sharing is not supported. That is in the case of a SAP Portal as producer and Non-SAPPortal as consumer.
I'm interested in a WebDynpro iViews and SAP application iViews sharing in a only-SAP Portals Network, where SAP Portals act as producer and consumer.
I've heard about the Remote Role Assignment and Remote Content Copy that are used in such case. I would like to ask if anyone knows if these can help overcome the restriction in sharing WebDynpro iViews and SAP application iViews that is present with WSRP? And if the advantage of WSPR, that is the application execution and rendering on the producer side, and as follows decreasing of bandwidth usage, is remaining in the case of the Remote Role Assignment and Remote Content Copy.
Thanks,
MladenHi Manish,
for sharing content between SAP and non-SAP Portals, your case, refer to
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/23fb36cad10d23e10000000a1553f7/frameset.htm
All the possibilities and restrictions of WSPR in the case of SAP EP are explaind there.
For sharing content between only SAP Portals refer to my other thread:
Portal Network - Content Sharing
Hope it helps you!
Mladen -
Hello,
In order to configure JMS Receiver Adapter to access Websphere Application Server 7.0, I have recently deployed file com.sap.aii.adapter.lib.sca with the following libraries:
com.sap.aii.adapter.lib_api.jar
com.ibm.ws.ejb.thinclient_7.0.0.jar
com.ibm.ws.orb_7.0.0.jar
com.ibm.ws.sib.client.thin.jms_7.0.0.jar
com.ibm.ws.runtime.jar
javax.j2ee.jms.jar
The communication channel can reach the queue but when I send a message it fails because services sap.com/com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc are not started.
Checking dev_server0 file I found the following error.
==============================================================================================
Service com.sap.aii.adapter.jdbc.svc start ================= ERROR =================
com.sap.engine.frame.ServiceException: Could not obtain an initial context due to a communication failure. Since no provider
URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure that any
bootstrap address information in the URL is correct and that the target name server is running. Possible causes other than
an incorrect bootstrap address or unavailable name server include the network environment and workstation network configurati
on.
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:151)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,
port=2809 vmcid: 0x4942f000 minor code: 3586 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:100)
... 6 more
Caused by: org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,port=2809 vmcid: 0x4942f0
00 minor code: 3586 completed: No
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:425)
at com.ibm.ws.orbimpl.transport.WSTransport.getConnection(WSTransport.java:436)
at com.ibm.CORBA.transport.TransportBase.getConnection(TransportBase.java:187)
at com.ibm.rmi.iiop.TransportManager.get(TransportManager.java:89)
at com.ibm.rmi.iiop.GIOPImpl.getConnection(GIOPImpl.java:120)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:209)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 16 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:522)
at java.net.Socket.connect(Socket.java:470)
at java.net.Socket.<init>(Socket.java:367)
at java.net.Socket.<init>(Socket.java:180)
at com.ibm.ws.orbimpl.transport.WSTCPTransportConnection.createSocket(WSTCPTransportConnection.java:270)
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:354)
... 28 more
Service com.sap.aii.adapter.jms.svc start ================= ERROR =================
com.sap.engine.frame.ServiceRuntimeException: Could not obtain an initial context due to a communication failure. Since no pr
ovider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure t
hat any bootstrap address information in the URL is correct and that the target name server is running. Possible causes othe
r than an incorrect bootstrap address or unavailable name server include the network environment and workstation network conf
iguration.
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:171)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.start(AdapterServiceFrameImpl.java:125)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor co
de: 775 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:163)
... 7 more
Caused by: org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor code: 775 completed: No
at com.ibm.rmi.iiop.Connection.checkEstablished(Connection.java:3091)
at com.ibm.rmi.iiop.Connection.send(Connection.java:2145)
at com.ibm.rmi.iiop.Connection._locate(Connection.java:463)
at com.ibm.rmi.iiop.Connection.locate(Connection.java:439)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:219)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 17 more
==============================================================================================
Could anyone tell me why is trying to connect to "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService"? Do I have to configure a default provider URL for SAP PI server? If so, where I configure it? Any help will be appreciated.
Thank you in advance.
Roger Allué i VallHi Roger,
we also experience the same issue and would be very keen to understand how you resolved this problem.
Many thanks.
Dieter
Maybe you are looking for
-
Sun Performance Library and OpenMP applications
Hi list, I have a code that uses BLAS/Lapack libraries. This code requires the BLAS/Lapack to run in serial mode. If and when it runs in parallel this is a disaster. The code runs in parallel with OpenMP directives in SMP systems. I specify the numbe
-
Hello! I have finished a project with many titles in it with a specific title-style. now I want to change the font in this style so that it will affect all titles in this project - how do I do it? By the way - will we ever have a "find and replace" f
-
Help - making a movie and the file is jumpy
I'm making a slideshow to show a group of 50 students tonight. I've never had this issue with iMovie before. I have iMovie '11 and OS Lion. The file is like it has scratch marks that appear at various times, whether it's a transition or just displayi
-
Hi, Am using the SEGMENT_DELETE function which in turn uses SEGMENT_NAMING_CHECK. My requirement is to suppress an standard segment E1EDL44 if the E1EDL44-VELIN EQ 3. Unfortunately, it is giving me an error in segment_delete stating as "Name E1EDL44
-
Are symbols only supposed to be used when you need 100% exact copies of an object? So if you need to animate an instance of the symbol you can't use the symbol? Is that correct?