SAP R/3 4.6C Cable Solutions upgrade to ECC 6.0 DIMP

Hi all.
We are planning to upgrade SAP R/3 4.6C system (Cable solutions) to an SAP ECC 6.0 (EHP4 - DIMP). We have few questions related to this upgrade.
1. Since Cable solutions add-on is no more available in ECC 6.0 and its getting replaced with DIMP, what kind of data conversion/migration we need to perform before or after upgrade?
2. Is there a data migration document available in SDN or SMP? We could not find such document though the note  664712 says there is a document ""Migration from Cable Solution V4.6C/1A to DIMP""
3. Does the data conversion/migration will happen from SAP 4.6C to ECC 6.0 or it needs an SCM system?
Thanks & Regards
Senthil

Thank you for your reply Gerald & Sunny.
Still I am not clear on the following
1. Where do we get the CS-to-DIMP-Migration-Guide.pdf document?
2. Is SCM a mandatory? or all CS data can be migrated to ECC 6.0 DIMP system?
would appreciate, if someone can throw some insight
Regards
Senthil

Similar Messages

  • BAPI in cable solution

    Hey,
    I know, it might be placed wrong here, but it´s also about debugging and maybe someone can help me out of trouble.
    I have the task to find an error in an webDynpro application in the SAP cable solution.
    In the backend, the va01/02/03 are extended with some new dynpros, where you can check, wether your chosen materials are available to deliver or not.
    The dynpro shows a traffic light and the date, the material can be delivered. The customer people have tried to use the bapi BAPI_SALESORDER_SIMULATE, but they can´t find an indicator for the availibility so I have to find a function module or a way to check, if it is available or not.
    So maybe anybody knows a function module for the cable solution to check the availibility(what I´m not expecting ), it would be the best way!
    But if not, can anybody advise me, how to find out, where the traffic light is going to be set or which datafield is laying behind the traffic light?
    I hope You can understand my problem. I only need to get the information, the traffic light shows in the availibility check of VA01/02/03 in the cable solution.
    Thank You very much for Your help!
    Message was edited by:
            Arne Hein

    Gaurav,
    Thanks for help.
    However I would like to share  something with you. If we create BOM, same drum type would be deliver with cable.
    Drum size would  be always changes based on length and size of the cable. So I don't think this would help us.
    Share your idea...
    Thanks.

  • The exact path for instguide to SAP R/3 4.6C upgrade to ECC 6.0

    Hi,
    Im kind of a bit confused with market place path.
    Could somebody give me the precise path to the Adobe upgrade document.
    of SAP 4.6C upgrade to ECC 6.0 Sr2.
    Windows/MSSQL.
    Thanks and Regards,
    Simoun

    Hi,
    try this URL:
    https://websmp103.sap-ag.de/~sapidb/011000358700006421122006E
    Regards,
    Sven

  • Upgrade to ECC 6.0 & SAP Netweaver 7.0

    Hi,
    We are right now using ECC 5.0 & Netweaver 2004 (EP 6.0). Since its very old we plan to upgrade in two phases with some time gap between them. The first phase will be upgrading the ERP to ECC6.0 and second phase is upgrading EP 6.0  to EP 7.0.
    The question are:
    1) Will the upgrade of ECC 6.0 will cause any conflict to the EP will be still on EP6.0 version for sometime in between?
    2) Should the upgrades be carried together or how is it suggested?
    3) Which is the best compatible version of Netweaver witl ECC6.0?
    Hoping for quick response as we need to plan accordingly.
    Thanks,
    Shruti

    Generally we recommend that ESS and MSS versions, Portal and ECC are synchronized
    The corresponding version and SP combinations are mentioned in
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
    However it is also possible to run a mixed landscape - the options are listed in note 1007341
    Best wishes
    Stuart

  • SAP Executive HR Reporting rapid-deployment solution

    Hi,
    I am trying to install the SAP Executive HR Reporting rapid-deployment solution, but I can only find the Configuration Guides and install files to the Solution Manager in the SAP Software download center.
    What I can't find is the .lcmbiar file with the pre-configured dashboards. Can anyone in here help me?
    Br
    Martin

    Hello, Martin,
    We are facing the same problem, did you manage to find anything?

  • SAP Upgrade from ECC 5.0 to ECC 6

    Hello All,
    We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
    Thanks in advance for your response
    Anirban

    Hi,
    It has to be manually done for each and every program.
    Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
    Regards,
    Subramanian

  • Is it a must to use Solution manager for ECC 6.0 upgrade

    Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

    Hi,
    I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4. 
    I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
    Any docs out there for this?
    Thanks!
    I figured it out... i had to add the R/3 Enterprise logical components to my system landscape.  After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
    Never mind!
    Edited by: Tom Janes on Sep 9, 2009 12:52 AM

  • SAP ABAP HANDBOOK BY KOGENT LEARNING SOLUTIONS

    Hi there,
    I need some inputs from people on this book:
    amazon link: SAP ABAP HANDBOOK BY KOGENT LEARNING SOLUTIONS.
    Here's the index for the book. Looks good to me.
    index: http://www.gbv.de/dms/tib-ub-hannover/601364627.pdf
    the price is around $55.
    -It's an expensive book. Should I invest in it?
    -Have you ever used or know anyone who has or heard about it?
    -Anything to help me make a decision.
    regards,
    Allwyn

    I would really prefer hard copies. Do you have any good book in mind or you are talking about this one itself? Have you used it?
    Also please email the soft copies if you have any .. it won't hurt to have them. My email is public on
    my profile.
    regards

  • Cable solution - price for returnable drum

    Friends,
    Could somebody provide information about  sales cycle flow for the cable solution. I mean in general, we create order - delivery - invoice. Apart from this what  other steps one need to carry out.
    How drum would be selected for the cable and charge amount for the same?
    Thanks.

    Gaurav,
    Thanks for help.
    However I would like to share  something with you. If we create BOM, same drum type would be deliver with cable.
    Drum size would  be always changes based on length and size of the cable. So I don't think this would help us.
    Share your idea...
    Thanks.

  • Upgrade from ECC 5.0 to ECC 6.0

    Hello All,
    I am preparing a pre-upgrade assessment for upgrade from ECC 5.0(SCP) to ECC 6.0.. I am suggesting the strategy Combined Upgrade and Unicode Conversion.
    I need a template on how to prepare the pre-upgrade assessment for this upgrade..The template should also contain Impact analysis on the other application like BI 7.0, EP 7.0 and CRM 5.0..
    How do I find out the Impact analysis on the other systems.Please do provide your suggestions on this.
    Thank You,
    Regards
    Thilip Kumar

    Hi Sharad,
    Thanks for your reply..Even I could not find any other added advantage that CUUC startegy can provide for systems with SCP..
    @All- Sorry to ask too many questions in one thread.
    One more question- What is the impact of ECC 6.0 upgrade on
    1) Solution Manager 4.0
    2) BI 7.0
    3) EP 7.0
    4) CRM 4.0
    Any document in SMP which talks about the impact on SAP landscape?I could not find a tailor made documentabout Impact Analysis of ECC 6.0.
    Regards
    Thilip Kumar

  • ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

    Hi Experts,
    I have a question.
    Recently our system went for upgrade and during testing phase we have found one issue.
    Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
    The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
    Please let me know your solution on this.
    Regards,
    Sekhar.

    Hi,
    - you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
    (SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
    1. Create new entries for the following KEY:
    a) Scenario OME0
    b) Object type 'P', 'O', 'S'
    c) Tab Page 'PBC_ORIG'
    2. for each of this entries, set the 'Exclude Tab Page'-Flag.
    - in case you do not want to deactivate the Budget tab:
    The error occurs due to missing entries for subtypes in table T778U
    for infotype 1516.
    Please maintain the according subtyes you want to use if you create a
    budget.
    Regards,
    Ana

  • Error during Upgrade of ECC 6.0 to EHP5

    Hi,
    I'm upgrading our ECC 6.0 system to EHP5 (on SLES 11) using SAPup.
    The system check is blaming the os version (please see italic text):
    Result of system check:
    Window "SDTExecution Intervervention required":
    Determined system information:
    Type of operating system: Linux X86_64
    Version of operating system: 2.11.1
    Type of database: SAPDB
    Version of database: 7.7.07.034
    ERROR: OS version 2.11.1 out of range (too low) Upgrade the operating system at least to version 2.3. before you continue.
    WARNING: OS version 2.11.1 out of range (too high) If this version is released for the downward compatible kernel you are using, please ignore this warning. If not, ask SAP for an individual release of your configuration. Do not continue before SAP supports your configuration.
    So the ERROR message is wrong, the WARNING is correct. It seems the upgrade tool is expecting a version between 2.3 and 2.9. How can I handle this "wrong" error message?
    Best regards,
    Christian
    Edited by: Christian Janson on Jul 11, 2011 8:24 AM

    Hello,
    under the link:
    [http://service.sap.com/instguides]
    in the left tree select:
    --> SAP Business Suite Applications
    --> SAP ERP
    --> SAP ERP 6.0
    --> SAP enhancement packages for SAP ERP 6.0
    --> SAP enhancement package 5 for SAP ERP 6.0
    i found the following text:
    SAP Enhancement Package Installation on top of SAP ERP 6.0
    The standard tool to install SAP ERP Enhancement Package 5 on top of SAP ERP 6.0 is the SAP Enhancement Package Installer.
    Download the latest versions of the SAP enhancement package installer (SAPehpi) guide and the SAP enhancement package installer tool.
    But in the download directory the tool SAPup is mentioned.
    So I'm not sure, which tool to use. Sorry.
    Regards, Michael

  • What are the things to be test in Portal Upgrading the ECC from 5.0 to 6.0

    Hi ,
    I never been as part of the ECC upgrade project. we are going to upgrade our ECC system from 5.0 to 6.0.  Also we have SAP portal in the landscape. Can any body guide me for the following points related to testing the Portal once ECC upgrade is done.
    What is the approach need to be followed.
    What are things need to be tested.
    what kind of test scripts need to be created.
    Please provide your suggestions and ideas..
    Thanks
    vijay

    Hi,
    In Upgrade you need to do all integration testing and check all functionalities.
    Thanks
    Sunny

  • SAP Data Archiving in R/3 4.6C and ECC 6.0.

    Hi Guys,
        Need some suggestions,
    We currently working on SAP R/3 4.6 and have plans to upgrade it to ECC 6.0,
    In the mean time there is an requirement for SAP Data Archiving for reducing the database size and increase system performance.So wanted to know if its better to do Data Archiving before upgrade or after. Technically which will be comfortable, Also wanted to know if any advanced method available in ECC 6.0 compared to SAP R/3 4.6.
    Please provide your valuable suggestion.
    Thanks and Regards
    Deepu

    Hi Deepu,
    With respect to archiving process there will be no major difference in 4.6 and ECC 6.0 system. However you may get more advantage in ECC6.0 system because of Archive routing and also upgraded Write, Delete programs (upgraded program will depend on your current program in 4.6 system). For example In 4.6 system for archive MM_EKKO write program RM06EW30, archiving of purchase document is based on company code in the selection criteria and there is no preprocessing functionality. In ECC 6.0 you can archive by purchase organization selection criteria and preprocessing functionality will additional help in archiving of PO.
    In case if you archive documents in 4.6 and later upgrade it to ECC 6.0, SAP system will assure you to retrieve the archived data.
    With this i can say that going with archiving after upgrade to ECC 6.0 system will be better with respect to archiving process.
    -Thanks,
    Ajay

  • Upgrade to ECC 6.04 PHASE: MAIN_NEWBAS/PARCONV_UPG ERROR

    Hi
    get error in Upgrade to ECC 6.04 in downtime phase - MAIN_NEWBAS/PARCONV_UPG.
    The screen says:
    Checks after phase MAIN_NEWBAS/PARCONV_UPG were negative!
    Last error code set: Conversion entries have been found in, see phase log for more detaile
    In the SAPup.log says that:
    CURRENTPHASE MAIN_NEWBAS/PARCONV_UPG
    ...started at 20110324123904
    Using phase log file 'PARCONV.LOG'.
    ..finished at 20110324124157 with status ERROR CHECKING MODEFLAGS.
    Error message set: 'Conversion entries have been found in, see phase log for more detaile'
    ...begin dialogue at 20110324124157
    And in the PARACONV.ELG file says:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PARALLEL ALTER TABLES MODEFLAG RESET: RSMFCONV and RETURN CODE in RSMFCONV.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PARALLEL ALTER TABLES MODEFLAG RESET: RSMFCONV and RETURN CODE in RSMFCONV.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    MVNTABS ERRORS: ddlntabs and RETURN CODE in PD990324.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "0"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV00.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV01.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV02.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV03.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    MVNTABS ERRORS: delntabs and RETURN CODE in PL000324.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "0"
    I look this log files ( RSMFCONV.DEV RSMFCONV.DEV PD990324.DEV NCONV00.DEV NCONV01.DEV NCONV02.DEV NCONV03.DEV PL000324.DEV ) but all of this, is exit code '0'
    I don't know where is the error.
    Any idea for helpme,
    thanks in advise.
    Sergio.
    Edited by: Sergio Mazzeo on Mar 24, 2011 1:24 PM
    The last lines of the  PARACONV.LOG says that:
    4 ETQ260 Starting batchjob "NTBUF_SYNC"
    4 ETQ230 Starting RFC Login to: System = "DEV", GwHost = "LKMDEV", GwService = "sapgw00"
    4 ETQ359 RFC Login to: System="DEV", Nr="00", GwHost="LKMDEV", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
    4 ETQ233 Calling function module "subst_start_batchjob" by RFC
    4 ETQ399 JOBNAME='NTBUF_SYNC', REPNAME='RSNTSYNC', VARNAME='', BATCHHOST='LKMDEV', IV_SCHEDEVER=' '
    4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
    4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
    4 ETQ010 Date & Time: 20110324124156 
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    3 ETQ399 log analyse: search for '.[WT ]' in '^N......\.DEV$'
    1 ETQ399 Conversion entries found:
    2 ETQ399 CONV ENTRY TBATG TABL/SCMB/TREEVIEW2                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLCMS_RE_OBJ_SPC                   0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLCNVCDMC_PROJHIER                 0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOB_COND_DIFF                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_AMT                   0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_BDT                   0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DATE                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DIFF                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_FMOD                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_LIST_COND                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOT_DATEPOS                    0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLGMBDGTLSTNUMBER                  0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLGMGRSPONSOREDOBJ                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLHRWEB_RULE_GROUP                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLT5RSOP_SCHEME                    0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_FSTAT                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_PRD_SET                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_BPRL                  0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_TYP                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_CATT_HEADER                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_ITEM_POOL                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTJBR_US_ACCT_T                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLVALT_SP_VAL_SEC                  0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLVDDD_HEADER_COL                  0CNVIE20110323DDIC
    4 ETQ001 START time "No modeflag to check for"
    1 ETQ206 Executing pre-phase DB specific actions.4 ETQ010 Date & Time: 20110324124157

    The last lines of the  file PARACONV.LOG says that:
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    3 ETQ399 log analyse: search for '^.[^WT ]' in '^N.......DEV$'
    1 ETQ399 Conversion entries found:
    2 ETQ399 CONV ENTRY TBATG TABL/SCMB/TREEVIEW2                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLCMS_RE_OBJ_SPC                   0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLCNVCDMC_PROJHIER                 0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOB_COND_DIFF                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_AMT                   0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_BDT                   0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DATE                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DIFF                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_FMOD                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_LIST_COND                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOT_DATEPOS                    0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLGMBDGTLSTNUMBER                  0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLGMGRSPONSOREDOBJ                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLHRWEB_RULE_GROUP                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLT5RSOP_SCHEME                    0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_FSTAT                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_PRD_SET                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_BPRL                  0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_TYP                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_CATT_HEADER                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_ITEM_POOL                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTJBR_US_ACCT_T                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLVALT_SP_VAL_SEC                  0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLVDDD_HEADER_COL                  0CNVIE20110323DDIC       
    4 ETQ001 START time "No modeflag to check for"
    1 ETQ206 Executing pre-phase DB specific actions.
    4 ETQ010 Date & Time: 20110324124157
    Can any helpme to this error. I don´t know what and where is the error. Not found this item in SAP Notes.
    Thansk a lot.
    Sergio.

Maybe you are looking for