SAP r/3 4.7x110 installation
Hi all,
I was wondering is there a way to install SAP r/3 4.7x110 on oracle 10g. As there is no installation media available for oracle 10g for this version in service marketplace. but when i saw the product availability matrix it is indicated there that 6.40 kernel supports 4.7x110 ... and 6.40 kernel supports oracle10g. but i cannot find any media of kernel 6.40 for 4.7x100.
Any body have any idea about it ?
Regards
Riz
See SAP note 896475
check out http://service.sap.com/installations
cheers,
Vincent
Similar Messages
-
SAP customer number unknown for installation number
Hi There,
We're facing some problems after a reconfiguration of some things in Solution Manager. We have SAP EHP 1 for SAP Solution Manager 7.0. Have made two days ago the installation of the latest SP, but not the kernel yet.
The problem is in the job SEND_SYSTEM_RELATIONSHIP_TO_SUPP. The error is:
08.01.2010 10:43:24 Job started 00 516 S
08.01.2010 10:43:24 Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant , user ID SOLMAN_BTC) 00 550 S
08.01.2010 10:43:24 SOL determined as monitoring Solution Manager system AI_SC_EN 075 S
08.01.2010 10:43:24 SAP customer number unknown for installation number 00XXXXXXXX AI_SC_EN 097 E
08.01.2010 10:43:24 Job cancelled after system exception ERROR_MESSAGE 00 564 A
The info about the system:
solman:soladm 21> disp+work
disp+work information
kernel release 701
kernel make variant 701_REL
compiled on HP-UX B.11.23 U ia64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 24 2009 21:53:01
update level 0
patch number 32
source id 0.032
supported environment
database (SAP, table SVERS) 700
701
operating system
HP-UX B.11
Thanks,
JoaoHi João Cesar,
I´m faccing with the same error... I installed the solution manager Ehp1 and it have SPS20 applied which correspond to ST 400 level 20 (SAPKITL430).
When I am in transaction SMSY in section Systems and I press the button "READ SYSTEM NUMBER" is shown an error message that says "SAP customer number unknown for installation" the details of help says:
Diagnosis
Installation number &V1& that is assigned to some system(s) in transaction SMSY is not assigned to an SAP customer number in table AIINSTALLATIONS.
Procedure
Please check the log of background job REFRESH_ADMIN_DATA_FROM_SUPPORT for errors.
So, when I entry in that job log I found this error:
No customer numbers maintained in view V_AISAPCUSTNOS | AI_SC_EN | 106
Then I went in table/view V_AISAPCUSTNOS and inside does not contain any data!!!
All the notes I found were related to lower versions and so I could not implemented the snotes corrections!! Any notes for my release that are related with this problem?
Joao Cesar what you did for solve this problem??? You didn´t mentioned!! You only mentioned that you implemented some notes.. but which ones?!!? -
SAP NW 7.0 Java Installation in MSCS (One Node)
Hi Experts,
I have read some cases that SAP is installed in MSCS that contains only one node. Does SAP support this kind of installation.
Thanks.
Regards,
sameyshaHi,
From my knowledge a single node MSCS cluster does not make sense. There are at least 2 nodes.
Regards,
Olivier -
Universal Data Server or SAP MII UDS 4.0 installation files
Hello Guru
I am new to SAP MII and trying to install and configure MII 12.0.12 on Maxdb.Win2k3 ,NW7 ...Where do i download the Universal Data Server or SAP MII UDS 4.0 installation files?
thanksmanaged to fid the download link on swdc
-
SAP Netweaver 2004s SR2 Post Installation Guide
Hi Guys,
Plz send me SAP Netweaver 2004s SR2 Post Installation Guide.....
Email ID :- <email address removed by moderator>
Thanks in advance.
Regards,
Suresh.KDear Suresh ,
You can download from https://websmp102.sap-ag.de/instguides OR https://websmp102.sap-ag.de/installnw70
OR Directly from :
https://websmp102.sap-ag.de/~sapidb/011000358700004073122006E
Regards ,
Santosh -
SAP ITS 6.2 Win64 installables path?
Can any one tell me that from where i can download SAP ITS 6.2 Win64 installables. I need to install it urgently. Kindly provide the complet path, if possible.
Goto http://service.sap.com/patches and click on "Search for Support Packages and patches". Enter "SAP ITS" in the search form. The first hit in the result list will guide you to the SAP ITS 6.20 pages. Now click on SAP ITS 6.20 link in the upper part of the page until you see links to "Windows Server on x64 64bit".
Hope that helps.
Regards,
Klaus -
SAP NW EP 7.3 Installer and Step by Step Guide
Hi all,
I have gone through so many documentation, can anybody help step by step in showing from where to get the SAP NW EP 7.3 installer as well as the installation documentation .
Thanks for the kind support.Hi Harish,
1. Below message appears when I goto STRUSTSSO2.
Maintain the PSE for Single Sign-On with logon ticket only in client 000
Can we request to get an access to 000 client?
--> Directly you can add the certificate into the ECC side. After importing the certificate in STRUSSTSSO2 first Add it to the Certificate list button and then click on Add to ACL button then a pop up will come then enter the client as 000 and submit
for Reference check this link ::
Single Sign On (for beginners)
2. When I try to import : TicketKeystore.view I get the message 'Cannot analyze certificate
where exactly you are getting this error in ECC Side or in portal??
In portal side you can add the certificate directly in the NWA -->Trusted systems , so that automatically certificate will be added into the certificates in portal.
Regards,
Anil. -
SAP 4.7 / MSSQL Cluster Installation
Hi:
I am in the planning stages of a SAP 4.7 / MSSQL Cluster Installation. I have sone this same install in non-clustered MSQL 2005/ SAP 4.7 envirionments, but cannot find a lot of good documentation/advice for the clustered install.
For example, when we install nonclustered MSSQL 2005, we use a VB script that takes care of the DB configuration for us. Is something similiar available for a clustered install. Any advice appreciated.David,
Do you have access to the install guides? The install on the cluster is covered extensively in these.
Hope that helps.
J. Haynes -
SAP NetWeaver CE 7.2 Installation error in Deploying java component phase
Dear Experts,
I am installing CE7.2 but i am getting error in 37th phase (DEPLOY JAVA COMPONENT). Error message as
An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2
> Installation Options > Application Server Java > Standard System > Standard System(
Last error reported by the step :Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -
classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar:
/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tc~je~cl_deploy.jar
-Xmx256m -Ddc.api.verbose=false
com.sap.engine.services.dc.api.cmd.Runner
deploy -l /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/deploy.lst -e stop -u lower
-w safety --lcm bulk -t 14400000 --host sapnce --port 50004' aborts with return code 104.
Error message is 'undefinedStatus:InitialDescription:. SOLUTION: Check 'undefined' and '' for more information.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.*
J2EE is running but I checked the cat /home/ce1adm/JdbcCon.log message as ,
Start: Sun Sep 26 02:23:40 IST 2010
OK: connected to CE1 on jdbc/pool/CE1
OK: disconnected
Stop: Sun Sep 26 02:23:42 IST 2010*
sapnce:ce1adm 16>
Then I had checked the R3 trans and log file is
4 ETW000 32 0.117400
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017' 26 0.117426
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1017 21 0.117447
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con=0, rc=1017) 21 0.117468
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1017 84 0.117552
4 ETW000 [dev trc ,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 30 0.117582
4 ETW000 [dev trc ,00000] DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB 23 0.117605
4 ETW000 [dblink ,00000] ***LOG BY2=>sql error 1017 performing CON 93 0.117698
4 ETW000 [dblink ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied 24 0.117722
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'CE1'"
Please help me in this I strucked in this step for last 1 day.
Regards,
Sampath
Edited by: Matt on Sep 28, 2010 8:54 AM - changed formatting for readabilitySorry friends, this thread was already answered and closed by some one I have open a new Thread for my issue.
Hi All,
I am facing similar issue , My error also similar , Here is the summery of the error, Please help I got stuck very badly here past 2 days....I have 250 GB free space in the directory were usr/sap directory.
An error occurred while processing option SAP NetWeaver 7.3 Developer Edition > Install > Custom Server Installation( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.
Thanks
Naveen -
SAP NetWeaver 7.01 Java installation on MSCS and Log shipping for DR
Hi Experts,
Can anyone please explain if below is possible :
- We have installed Netweaver 7.01 Java application server on Microsoft clustering which is working perfectly ok.
-Now we are looking at building a DR solution for the above installation using SQL Server 2008 Log-shipping. The DR site has the same MSCS configuration as the primary site.
-If we log-ship the production database and create a secondary database in "standby" or "norecovery" mode, how do we install a Passive SAP Central instance in case we want to failover from the primary to secondar ?
- We know that we have the primary database log-shipped to the secondary site and in the event of failure we can switch the roles and make secondary as primary and then perform the system copy steps on the MSCS. the drawback here is that it will take a long time to bring the system online if we perform the system copy. Our RTO is one hour only so this is not acceptable.
Question : Is there anyway we can install the Central Services and Applicaiton servers beforehand on the secondary site on the secondary log-shipped database so that in the event of failure all we do is bring the secondary database primary and then start the SAP on the secondary site ?
If yes then can anyone point me the any SAP note or documentation that has the details of how to do this.
I have already looked at 1101017, 965908 but its not clear how we can perform the installation on the JAVA stack only.
We want to implement similar to what is shows in the below diagram :
http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm
Appreciate if someone can assist in resolving the above query.
Thank you.
RAThanks Markus for your reply.
I did looked at the HA web page from SAP and configured MSCS for HA but there's no information regarding DR setup. All it says is setup a log shiping which we already know but there's no procedure to setup SAP on the DR site(Passive SAP central instance)
My original question still stands :
- Is system copy the only option that we need to perform at the DR site in the event of failure ( Assumption is that we ieve make the secondary database as primary and also sync file system for JAVA using SAN replication technologies)
- We have to achieve an RTO of 1 hour which is not possible in this case as performing system copy using MSCS HA option will take few hours to setup and test.
-The link "http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm" shows that we can have SAP PAssive central instance. Whats the procedure of installing this Passive instance on the secondary site so in the event of failure all we do is make the secondary database primary and bring the SAP system online(installed already - no system copy performed) and also file system is already is sync.
Thank you.
RA -
Error in SAP BI IDES 7.0 Installation
Hi i got error during installation of BI IDES 7.0 in Import ABAP stage.. ( my server is winodws 2003 64 bit )
Error message is :
Not all objects are sucessfully processed. DIAGNOSIS : for details see output file with invalid objects invalid_object.txt and log file object)checker.log. SOLUTION : Normally it indicates the data load error but in some special cases ( for example if some object were created or loded externally ) you can press OK to continue.
then i have checked both log file and it is..
*invalid_objects.log*
checkObjects=
dbType=ORA
strDirs=F:\SAP_BI\BI_EXP_1\1\EXP1\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP2\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP3\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
package object type action status
SAPAPPL1 ?N pkey create
SAPDFACT ?N pkey create
*object_checker.log*
INFO: 2009-01-02 03:09:19
Object Checker is started.
CONFIG: 2009-01-02 03:09:19
Application options:
checkObjects=
dbType=ORA
strDirs=F:\SAP_BI\BI_EXP_1\1\EXP1\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP2\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP3\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
CONFIG: 2009-01-02 03:09:19
List of packages with table structure: 'SAP0000'.
INFO: 2009-01-02 03:09:19
18 packages found in 'F:\SAP_BI\BI_EXP_1\1\EXP1\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP2\DATA;F:\SAP_BI\BI_EXP_2\2 & 3\EXP3\DATA' directories.
TRACE: 2009-01-02 03:09:20 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'STXH~TDN' found in STR file for 'SAPAPPL0' package.
TRACE: 2009-01-02 03:09:20 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'DB6CSTRACE~1' found in STR file for 'SAPAPPL1' package.
TRACE: 2009-01-02 03:09:21 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'VARIS~DB6' found in STR file for 'SAPAPPL2' package.
TRACE: 2009-01-02 03:09:22 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DBPROPERTIES' from STR file for 'SAPSDIC' package.
TRACE: 2009-01-02 03:09:22 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DDLOG' from STR file for 'SAPSPROT' package.
ERROR: 2009-01-02 03:09:22
2 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
INFO: 2009-01-02 03:09:22
Object Checker is stopped.
So Any one please help me out.Hi Dear,
First you have to Retry the installation and if you will get same error then you have to check logs SAPSDIC package and invalid_objects.txt in C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS. i have also faced like these errors and if the installation continued after Retry then ok otherwise you have to reinstall the sapinst.
Regards, -
Error in Deploying java components - SAP NW CE 7.2 installation on Windows
Hi,
I am installing NW CE 7.2 on a windows machine. I opted for custom installation. I get the below error at "Deploy java components step. Any clue on why is this happening and how to resolve ?
<html> <head> </head> <body> <p> An error occurred while processing option SAP NetWeaver 7.2 Developer Edition > Install > Custom Server Installation( Last error reported by the step :Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW72\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jce.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host L-156007555 --port 50004' aborts with return code 104. Error message is <b>'undefinedStatus:AlreadyDeployedDescription: 1. Already deployed component has version:1000.7.20.1.0.20091117001100.</b> SOLUTION: Check 'undefined' and '' for more information.). You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM. </p> </body></html>
Regards,
RukmaniThe below msg is from sapinst_dev.log
<html> <head> </head> <body> <p> An error occurred while processing option SAP NetWeaver 7.2 Developer Edition > Install > Custom Server Installation( Last error reported by the step :Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW72\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jce.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host L-156007555 --port 50004' aborts with return code 104. Error message is <b>'undefinedStatus:AlreadyDeployedDescription: 1. Already deployed component has version:1000.7.20.1.0.20091117001100.</b> SOLUTION: Check 'undefined' and '' for more information.). You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM. </p> </body></html> -
SAP R/3 4.6C installation on HP-UX 11.31
Hi Export
We have the old system based IBM server with HA environment, Cluster software is HACMP.
Now, the goal is: Migrate the SAP R/3 4.6C system to HP hardware.
Hardware: HP rx6600 & rx8640 server with MC/SG (cluster software);
DB& SAP R3 version: Oracle 9.2.0.6, R/3 4.6C non-unicode;
Here is my question:
Could you give me some wise recommendations regarding how to implement the new installation of SAP R/3 on HP-UX 11.31 with MC/SG?
Because I am confused that how to configure the Oracle RAC on MC/SG(of HP).
I try to find the installation documents for R/3 4.6C,
but I could not find the detail configuration for cluster environment, especial for HP's MC/SG.
If somebody could share the installation manual or recommendations to me, I would appreciate your great support!
Many thanks.
Best regards from
Charles Yu>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime. -
SAP EP 6.0 SR1 installation
Hi!
I have problem with SAP EP 6.0 SR1 (SP9) installation on WinXP SP2. HW: Intel P4 2.6GHz, 2Gb RAM. Oracle 9.2.0.5 installed locally.
Installation stopped on stage "Load Java Database Content" with string "Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)" in the status line.
Last record in sapinst_dev.log:
INFO 2005-07-14 17:05:30
CJSlibModule::writeInfo_impl()
Output of D:java14/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:oracleIL1920/jdbc/lib/classes12.jar;D:/usr/sap/IL1/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/IL1/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/IL1/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/IL1/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/IL1/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'IL1,jdbc/pool/IL1,D:usrsapIL1SYSglobal/security/data/SecStore.properties,D:usrsapIL1SYSglobal/security/data/SecStore.key' '-dataDir' 'S:/install/_SAP/NetWeaver/NW04-SR1/02_j2eeJ2EE_OSINDEPJ2EE-ENG/JDMP' '-job' 'D:Appsapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST/IMPORT.XML' '-log' 'D:Appsapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST/jload.log' is written to the logfile D:Appsapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST/jload.java.log.
In the file jload.java.log:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
Does anybody know where the problem can be or how to investigate it?
WBR, Ivan.Hi Praveen,
I know that XP doesn't supported officialy, but we have successfully installed SAP EP SR1 on other XP workstations. The problem with this particular workstation. It's standart NW'04 SR1 installation.
The next problem that during installation occurs windows error of Oracle TNS Listener process This error still exist after Oracle (9.2.0.5) reinstallation.
So I don't know where the problem is... In Oracle or XP configuration...
WBR, Ivan. -
SAP Strategy management and Netweaver installation
Hi experts,
i want to install SAP strategy management 10.0 on windows for SQL Server. I was reading through the installation guide and one of its prerequisite is to install netweaver and also deploying FCP and other components.
Below is the files i downloaded but i dont get any file to install. There's no installation files after extracting the downloaded files. Also i dont know where to get the JSPM to deploy the SCA components.
Urgent Help on how to get this installations done successfully will be appreciated with possibly screenshots.
Regards
JusticeHi Les Smith,
Thanks for the reply. I also want to Know the software i am downloading whether they are the right ones? which of the netweaver should i download?
The EHP1 or just the normal Netweaver?
The normal one does not have any installation file.
Please help me on that too.
Maybe you are looking for
-
CRVS2010 beta - How to email a report from the viewer
So, I know I can export and print a report directly from the report viewer, but I need to be able to click a button on the viewer and then email a PDF version of the report. Is this, or something like this, possible?
-
Hi all, 11.2.0.3 I am dropping a user with QUEUE objects but I got error SQL> / drop user Q_ADMIN ERROR at line 1: ORA-00604: error occurred at recursive SQL level 1 ORA-01406: fetched column value was truncated Please help... Thanks, pK
-
Quick Link to .xlsm file
Hello everyone, I'm having hard time when trying to create Quick Link. I'm using Quick Link to Element which is supposed to open another .xlsm workbook from server. It doesn't seem to work properly though as every time I press the link I get the foll
-
Are there any free safe anti-virus downloads
are there any free safe anti-virus downloads compatible w/windows 2000
-
I can not execute a dynamic action if I execute a BI
I am executing an infotype in Batch input with a call transaction and the dynamic actions don't work. Any ideas. Thank you.