SAP R/3 application component issue

Hi all,
My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA are assigned under not defined node as individual node.
Not only this when i replicate the data sources in BI side in QA these data sources are replicated but come under unassigned nodes because of the missing main node.
So can any body help me in removing this main node from the $TMP folder and save this in a transpotable package to transport that to QA ECC and the same to replicate in BI.
Regards,
Prabhakar.

Hi Markus,
This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
So please suggest me the approach to resolve this issue.
Regards,
Prabhakar.

Similar Messages

  • JSP application component issue

    I have an existing documentation repository, accessible through java classes. I'd like to use the portal content management features (folders, shared editorial/publication rights) to manage these documents. Can JSPs (created as application components for the content area) take advantage of my existing java classes. Am I permitted to create the sort of application links of the type allowed in the pl/sql application components? Note: this is not a question about web providers, but JSP item in content area.. Thanks for any advice.
    GReg

    Hi Markus,
    This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
    So please suggest me the approach to resolve this issue.
    Regards,
    Prabhakar.

  • Configuration of SAP R/3 application component in Source system of SAP BW

    Hi , Can someone guide me through the installation of SAP R/3 application components in SAP BW. It will highly appreciated if I can get some guidance on it.
    Subramanian

    Hi,
    Please check the link below.
    http://help.sap.com/bestpractices/BBLibrary/documentation/B03_BB_ConfigGuide_EN_DE.doc
    Rgds,
    Suman

  • SAP Webdynpro ABAP Application Caching Issues

    Hi All,
    We have developed custom applications using Webdynpro - ABAP, using FPM and accessing those applications through SAP Netweaver Portal 7.0. I have deactivated all the caching techniquies in Portal @ iview level and Page level, Portal Runtime and ContentFetch side, But still causing the same problem.
    I have a doubt, wether this is happening because of SAP Logon Caching @ SAP WAS system level. I have checked the SSO parameter settings in RZ10 Profile parameters. Our basis people have set both accept and create parameter value = 1. Is this causing issue?
    Or Is there any other settings which is required to do in Portal or SAP system level. Please let us know , really appreciate your value suggestions and help.
    Please find the below links, which im referring to...
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/d2/91553b4d53273de10000000a114084/frameset.htm
    http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/48/69eb40e8a607d6e10000000a42189c/content.htm
    Thanks in Advance
    PRadeep

    Hi-
    (though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
    It is required to have a parameter WI_ID (as an Application parameter) in your WDA. And via this Application parameter WDA will receive the workitem id, when the task is exceuted from UWL (provided configuration is done in swfvisu)
    Could you confirm, there is no Application parameter (WI_ID) in your WDA?
    It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id
    If you defined WI_ID in Application parameter and there is an option to provide value and it seems, you have defined some value over there or other way might be in your method (inbound plug), you may gave default value to WI_ID in the parameter
    If your application is working properly from UWL and for testing purpose, you could put a breakpoint and change the workitem id, when executing from se80
    Vinoth

  • How to create application component in SAP R/3

    Hi gurus,
                 I have created one custom defined master data in SAP R/3.I need to replicate it in BW.So I need to create one application component by own.is it possible to create custom application component instead of assigning it to SAP R/3 application component?.
    Thanks & Regards,
    Bharath

    To my knowledge you cannot create an application component of your own. Assign it to an existing appropriate app component.

  • Can not create an Application Component on SAP R/3 system

    I have a source as SAP R/3 ( ECC 6.0 ) and Target as SAP BW 7.0
    a)Log on to SAP BW 7.0 and used  the “ID3CLNT400”  source system ,  by using  Modeling --
    > Source System  --  choose “Customizing Extractors”  from the context menu of the source system “ID3CLNT400”
    In the transaction  SBIW  on the SAP Source system , choose  the Business Information Warehouse -- > Post Processing of DataSources
         > Edit DataSources and Application Component Hierarchies.
    Choose the “IMG Activity “ Here , I am getting one warning.
    "NO Valid Application Component Exists"
    When I hit the continue button .
    Here when I create an Application Component and “SAVE”  the changes, I am getting the following error.
    Package "Z_Train" doesnt exists. Chose "Display Object " or "Cancel"
    Because of this , I couldn’t creat an Application component and also couldnot load any thing on the SAP BW side. Also , I am no way connected to the "Z_TRAIN" Package

    can u pls tell me how u solved it
    I am working on  Production system  when I go to rsa5 it displaying the msg
    No valid application component hierarchy exists
    Message no. R8053
    Diagnosis
    Currently no application component hierarchy ("APCO_MERGED", database table RODSAPPL and RODSAPPLT) exists in the system. This is required in BW so that the DataSources can be displayed correctly in the source system tree.
    Procedure
    Copy the application component hierarchy from the Content using transaction RSA9.
    In development system I went to RSA9 & transferred the application componet then its asks or pkg name I have given the pkg  name also before use the datasrcs , I have transported the same thing to production before transporting the datasrcs but in production the application component herarachy did not get transported I think that why its giving the msg No valid application component hierarchy exists but my datasrcs got transported ,pls suggest me what has to be done
    Should I import the same request in to production again
    Or shall I run rsa9 again & transfer the application component hierarchy again & transport it to production id I do this will already transported datarscs have any effect in production

  • Application Deloyment issue...

    hi,
    i am getting this Deployment error...
    we got two servers one for developers at offshore and
    one at the onsite...
    the strange thing is that it is deploying n running fine on the offshore server.
    but not getting deployed on the onsite server!!!
    i have put the required references required and
    checked them too...!!!
    regards,
    -Amol Gupta
    Oct 18, 2007 11:11:04 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [004]Deployment aborted
    Settings
    SDM host : bp1xeuaa558
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
    Aborted: development component 'exmpl/supplier_lds_create_adobe'/'bp.com'/'LOKAL'/'0.2007.10.18.11.10.17'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application bp.com/exmplsupplier_lds_create_adobe.. Reason: Clusterwide exception: Failed to deploy application bp.com/exmplsupplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application bp.com/exmpl~supplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted

    >
    I have oracle PL/SQL application performance issue. To open a screen populated with 7,000 records takes 5 minutes.
    I have used SQL Analyze to get Index recomendation. Indexing did not help that much.Switch on a trace on a user who is just about to run that screen - let them rip.
    Stop your trace. Get your trace file. Run it through TKProf.
    Read the book by Cary Millsap that Sybrand recommends (or take a look
    at Chris Lawson) - i.e. read up on trace files and looking at them.
    Get the SQL that is run by the user and try running it from SQLPlus
    on the server (no network or app issues) - set timing on.
    That would be my approach.
    Do you think upgrading or replacing with newer machine can improve performance? Getting a newer machine often satisfies the geek's primeval urge to
    get his grubby little paws onto fancy shiny hardware - it may well
    work for a while, however you're not tackling the underlying cause
    of your problem, and it will (probably) reappear when the limits
    of the new RAM/CPU have been hit.
    If you what is suggested above, at least you'll be able to say
    to your management - "well, if we get a new server, performance
    will improve by this much, until we have (say) 14.000 records in
    the table, when performance will go back to the way it was before".
    Until you run a trace, you will have no idea if the problem will
    scale linearly with the no. of records or how it will
    behave into the future.
    You cannon manage what you cannot measure.
    Paul...
    Taf

  • Transport Error on Data Mart Application Component

    Hi All,
    I have to transportthe export data source for my DSOs. I did use transport collection to make sure all the relevent objects are collected. When I transport the export data sources everything is going fine, but the DM (Application Component for the export data sources fail and put the object in repair status).
    The 8* data sources are active and available in the myself source system and the update rules from the DSO to Cube is also active, but the info source is not there because the Data Mart - Application component failed. It says as follows in the transport log.
    'Object R3TRAPCODM is in repair status. Therefore, it cannot be imported'.
    If the object is in repair status, can I ask the basis guys to re-import with over-write option? will it fix the issue. I could not see the repair statuis on the object as it is an SAP component.
    Or
    anyone tell me how to transport export data sources. I am in BI 7.0 but using RSA1OLD setup.
    Anyclues....?
    Thanks,
    Alex(Arthur Samson)

    I am closing this question. Identified the cause of the error.

  • Datamart application component  tree invisible

    Is the R/3 application component hierarchy and BW application component hierarchy same
    I read on service sap ,its NOT
    so how to get the Datamart tree visible with all the 8*datasources ,as of now its not visible but if i go to RSA6 ,i see all those datasources under the component called DM and DM-IO
    now how to get this DM and DM-IO from RSA6 to appear in the datamart tree section from below path
    RSA1>Sourcesystem>Datamart-->Datasource overview
    currently nothing appears here ,BUT R/3 application component is visible properly under
    RSA1>Sourcesystem>R/3-->application component
    thanks

    None of the answers are correct,I  do have mentioned clearly am talking of here the DATAMART (8*)appl comp  hierarchy and not R/3 appl comp  hierarchy ,R/3 is visible.
    Also its not that just one or two 8* datasource do not appear in the datamart appl comp  hierarchy ,the whole tree itself is dissappeared,it was visible just a day back,so the tool-->settings replied do not solve the issue ,it was already tried though.
    R/3 and datamart appl comp hierarchy both are separate totally.
    thanks

  • Error: No valid application component hierarchy exists in RSA5

    Hi Gurus,
    We have recently installed SAP R/3 for BW. when i get in to RSA5 i am getting error message "no valid application component hierarchy exists" .  Do i need to do any settings here. When click enter later on, i can see all the data sources under new_hier_root.
    And under new_hier_root i have unassinged notes
    New_Hier_root -> unassigned notes -> application components.
    Thanks in Advance,
    Jameel

    Jameel,
    first we need to transfer application hierarchy.
    try this one SBIW>Business Content DS>Transfer Application Component Hierarchy or RSA9.
    Hope this help.
    Regards,
    Nagesh Ganisetti.

  • Error while executing SAP E-Commerce Application with UME system

    When attempting to login to the B2B application (http://hostname:port/b2b/init.do), we receive the following error:
    Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
    I checked the defaultTrace log and every time the login page is called the following messages are displayed:
    #System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The output is committed.
    #System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###  at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:354)#
    another 40 lines of similar text
    When a login is attempted, the following messages are appended to the trace file:
    #tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#Guest#0##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='begin' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin'#
    tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='end' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin' [forward]='/login.do' [exectime]='42'#
    #tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofuncionexecution]='begin' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM'#
    #tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##<hostname>_CJM_678801250#USER1#f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofunctionexecution]='end' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM' [exectime]='12'#
    I have modified the userid and hostname in the above trace output.
    Does anyone know how we can debug this issue further?
    Thanks,
    Setu

    Hi,
    Are you using UME login type for your B2B Scenario?
    In your B2B XCM setting have you selected UME related login type?
    eCommerce Developer

  • Listing logical database for a given application component

    hi
    which function module will return the logical database for a given application component from the SAP hierarchy.
    Example:
    Input- application component- LO
    output- MSM, etc.,
    Thank you.
    your time and answers will be compensated with points.

    Why dont you use two selects to get the required information#
    TAble <b>APADEVC</b>
    Here you will get the link from Application Component to Package
    Application Class - Packet
    Package           - Devclass
    Then if you go into Table <b>TADIR</b>
    and give the following input
    PGMID = R3TR
    OBJECT = LDBA
    DEVCLASS = package name
    you will get all the Logical Databases for that Application Component.
    Here obj_name will be the Name of the LDB's
    Message was edited by:
            Dominic Pappaly

  • Download Webdynpro ABAP application(component) on desktop

    Hi All,
    How do I download Webdynpro ABAP application(component) on desktop(hard drive) from SAP system? I couldn't find a feature in SAP that I could use to achieve this functionality. Also after downloading the  Webdynpro ABAP application(component), I would like to upload it back into the SAP system. Any ideas?
    Regards,
    Tom

    Hello Tom,
    you can use SAP link to download or upload ABAP objects. check out this link
    http://code.google.com/p/saplink/wiki/pluginList
    BR, Saravanan

  • RE: Application component is BLANK in PSA for 2LIS_03_UM

    User perform settlement thru K088. I performed RSA3 to check the data. The application component and transaction key is filled with value.
    I checked the BI prod and look into the PSA for the same accounting document. Here, the application component is missing and so is the transaction key. Becuase of it, there is  no update on the revaluation to the SOH value.
    Can some one tell me why it is happening like that.?
    I did a similiar check on my DR system (copy of LIVE data) and does a similiar operation and extract it to my development BI box.
    In this setup, both the Dr and BI development shows that the application component is filled. so is the transaction key.
    Is there some patches missing in my SAP PROD.box?
    Bye

    Hi,
    Please activate the process keys.
    1. select industry sector in T.CODE: MCB_( process keys will be activated)
    2. select NDI and BW options in TCODE: BF11.
    after that recheck it again
    Best Regards,
    M.H.REDDY

  • Error: No SAP Business one application is running

    Hi
    I got error "No SAP Business one application is running" when try to start our Add-on from SBO Client using remote desktop.
    Problem Description: Add-on has been installed on server successfully. I want to access remote desktop of the client machine, and when login remotly to the client machine and open SBO client and start our addon from addon manager then it gives the above error.
    If we dont access the client machine remotely and login to the client machine directly then addon connected well.
    suggest me what to do to resolve this error.
    Thanks...

    Hi
    I was just approached by someone else with such an issue...
    We use Windows Terminal Services Client to access training systems - without issues.
    Do you use sth like Citrix with load balancing?
    There such issues might happen, but I don't have a real good idea what the issue might be in your case.
    Maybe someone else has experienced the same problem - and resolved it?
    regards,
    Frank

Maybe you are looking for