SAP R/3 connection from KM Component

Hello,
We have the following requirement which we are trying to explore if it would be a possibility. Our Org Management structure in SAP R/3 stores information like User's manager and other details. Now we would like to install KM component within EP and make use of this Org structure as part of R/3 to decide who should be receiving the document(s) based on user authentication( Dynamic approver identification).
Is this possible within KM ? Can KM talk to SAP R/3 to fetch these kind of details ? or are we trying to aim too high ?
Regards
Swami Bala

Hi Swami,
JCo: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap java connector - jco - client programming
JCA: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/jca on ep6 building portal applications.zip
More documents can be found by just typing JCo / JCA into the SDN search for SDN Content...
Hope it helps
yours sincerely search engine
Detlev
PS: Please consider awarding some points for helping answers by clicking on the yellow star at the reply-postings... Thanks in advance...

Similar Messages

  • Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

    Dears,
    I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
    I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
    ==========================================================================================
    **** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
    Error:  >Mon Jul 14 11:20:24,636<    RfcException: [null]
        message: Connect from SAP gateway to RFC server failed
    Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
    LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
    ERROR       hostname 'cpe1601' unknown
    TIME        Mon Jul 14 16:20:25 2014
    RELEASE     740
    COMPONENT   NI (network interface)
    VERSION     40
    RC          -2
    MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
    LINE        193
    DETAIL      NiHLGetNodeAddr: hostname cached as unknown
    COUNTER     3
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    ==========================================================================================
    This problem happens when my app executes the line:
    JCoServer myServer = JCoServerFactory.getServer(myServerName);
    My system properties:
    jco.client.lang=EN
    jco.destination.peak_limit=10
    jco.client.client=800
    jco.client.passwd=********
    jco.client.user=********
    jco.client.sysnr=01
    jco.destination.pool_capacity=3
    jco.client.ashost=/H/155.56.49.28/H/cpe1601
    jco.server.connection_count=3
    jco.server.gwhost=/H/155.56.49.28/H/cpe1601
    jco.server.progid=VSPAGUE
    jco.server.gwserv=sapgw01
    jco.server.repository_destination=VSPAGUE
    Using SAP Logon i can connect to server cpe1601 system E16 without problems.
    Please, I really need some help, because my knowledge on SAP platform is minimum.

    Hi Markus,
    Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
    As you could see, the host I'm connecting is from SAP RAC Service.
    Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
    System Connection Parameters
    Description: SAP ECC 6.0
    Application Server: cpe1601
    Instance Number: 01
    System ID: E16
    SAProuter String: /H/155.56.49.28/H/
    Below the connection information I received from SAP RAC SUPPORT for testing purposes:
        E16 System:
        SID: E16
        Client: 800
        System Number: 01
        Server: cpe1601
        Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
        User: ********
       Password: ********
       SAProuter String:
       If you don't plan to use SAPRouter at your end,
       /H/155.56.49.28/H/    

  • Crystal report- Connect from SAP gateway to RFC server failed

    Hi All,
    I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
    Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
    Error :
    Logon failed.
    Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
    Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
    Location SAP-gateway on host ply.log.com/sapgw30
    Error timeout during allocate
    TIME ....
    Release 700
    Component SAP Gateway
    Version 2
    RC 242
    Module gwr3cpic.c
    LINE 1996
    Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
    Can you please help us solving this error.
    Thanks
    Chetan

    Hi Stratos,
    The SAP Version is ECC 6.0.
    The below transports have been imported.
    u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
    u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
    u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
    u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
    u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
    Thanks & Regards,
    Chetan

  • Connect from SAP gateway to RFC server failed

    Good day and a happy new year to you all!
    I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
    >>>>>Start<<<<<<<<<<
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
    LOCATION    SAP-Gateway on host bwsys / sapgw02
    ERROR       timeout during allocate
    TIME        Sat Dec 31 13:16:19 2005
    RELEASE     640
    COMPONENT   SAP-Gateway
    VERSION     2
    RC          242
    MODULE      gwr3cpic.c
    LINE        1785
    DETAIL      no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
    COUNTER     2
    >>>>>>>>>END<<<<<<<<<<<<
    I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
    Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
    What could be wrong or missing in my configuration?
    Regards,
    Joao.

    hi Joao,
    check if oss note 447882 relevant
    you may ask basis for help
    Symptom
    You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
    Other terms
    SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
    Reason and Prerequisites
    The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
    Solution
    Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
    An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
    The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.

  • Error: Connect from SAP gateway to RFC Server failed

    Hi
    I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
    Please kindly help.
    Erro: Connect from SAP gateway to RFC server failed.
    Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
    LOCATION  SAP-Gateway on host hostname / sapgw03
    ERROR       timeout during allocate
    TIME Wed Oct 31 05:31:45 2007
    RELEASE 640
    COMPONENT SAP-Gateway
    VERSION 2
    RC 242
    MODULE gwr3cpic.c
    LINE 1795
    DETAIL no connect of TP sapdp03 from host hostname after 22 sec
    COUNTER 3

    Hi K Patil,
    Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
    to make this work you have to make entry in the SLD of your server
    fort that plesae acess this link.
    Re: JCo connection Error
    Re: wt is SLD.. how to do configure it
    Please Reward Points if Helpfull.
    Regards
    Vinit
    Edited by: Vinit Soni on Dec 19, 2007 7:20 AM

  • HTTPs connection from SAP WebAS

    Hello,
    I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
    The iSaSiLk authentication is based on client certificates.
    I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated  with no errors. When testing the connection we're getting the following error message:
    SAP icm log:
    [Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
    [Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
    [Thr 1087400256]      in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
    [Thr 1087400256]     out: sssl_hdl = 0x1a3310c0
    [Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
    [Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
    [Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
    [Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
    [Thr 1087400256]   SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
    [Thr 1087400256]      in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
    [Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
    [Thr 1087400256]      in: hostname = "<remoteServer_to_be_accessed>"
    [Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
    [Thr 1087400256]   SapISSLUseSessionCache(): Creating NEW session (0 cached)
    [Thr 1087400256] Tue Jan 13 10:10:22 2009
    *[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
    [Thr 1087400256]    session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
      secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
    [Thr 1087400256] >>            Begin of Secude-SSL Errorstack            >>
    [Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
    [Thr 1087400256] <<            End of Secude-SSL Errorstack
    [Thr 1087400256]   SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
    [Thr 1087400256]   No certificate request received from Server
    [Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
    [Thr 1087400256] ->> SapSSLErrorName(rc=-57)
    [Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
    [Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
    On the iSaSiLk server we're getting:
    ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
    ssl_debug(2): Received v3 client_hello handshake message.
    ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
    ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
    ssl_debug(2): CipherSuites supported by the client:
    ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
    ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
    ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
    ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
    ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
    ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
    ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
    ssl_debug(2): CompressionMethods supported by the client:
    ssl_debug(2): NULL
    ssl_debug(2): Sending server_hello handshake message.
    ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
    ssl_debug(2): Selecting CompressionMethod: NULL
    ssl_debug(2): Sending certificate handshake message with server certificate...
    ssl_debug(2): Sending certificate_request handshake message...
    ssl_debug(2): Sending server_hello_done handshake message...
    ssl_debug(2): IOException while handshaking: Connection closed by remote host.
    ssl_debug(2): Sending alert: Alert Fatal: handshake failure
    ssl_debug(2): Shutting down SSL layer...
    ssl_debug(2): Closing transport...
    From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
    Can anyone give me any suggestion?

    Hello Olivier,
    Thanks for your answer.
    I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
    Filename            SAPSSLSPHTID.pse
    PIN                 <no>
    Signature           X
    Encryption          X
    Profile Parameter
    DIR_INSTANCE                   /usr/sap/XID/DVEBMGS00                       /usr/sap/XID/D00
    sec/dsakeylengthdefault                                                     1024
    sec/libsapsecu                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
    sec/rsakeylengthdefault                                                     1024
    ssf/name                       SAPSECULIB
    ssf/ssf_md_alg                                                              SHA1
    ssf/ssf_symencr_alg                                                         DES-CBC
    ssf/ssfapi_lib                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
    ssf2/name
    ssf2/ssf_md_alg                                                             SHA1
    ssf2/ssf_symencr_alg                                                        DES-CBC
    ssf2/ssfapi_lib
    ssf3/name
    ssf3/ssf_md_alg                                                             SHA1
    ssf3/ssf_symencr_alg                                                        DES-CBC
    ssf3/ssfapi_lib
    Environment variables
    USER                xidadm
    SECUDIR             /usr/sap/XID/DVEBMGS00/sec
    PSE
    Validity            18.12.2008 19:47:04   18.12.2009 19:47:04
    Algorithm           RSA (OID 1.2.840.113549.1.1.1)
    Test signature
    Signature OK
    Verification OK
    Test encryption
    Encryption OK
    Decryption OK
    As you can see, the cipher algorithm used is RSA. Any suggestion... ?
    An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
    Once again thanks for your answer.

  • Dbcon connection from sap db2 to external sql server

    Hi ,
    I am trying to connect from my sap server which is in unix platform with DB2 database to external SQL server using DBCON as  MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>. But while running ADBC_TEST_connection i am getting the error . When i check the error log it says
    Loading DB library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so' ...
    M  *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dbmssslib.so") FAILED
      "Unable to find library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so'."  [dlux.c       445]
    M  {root-id=002655A9DCD21EE3B89D69F99DF39F0D}_{conn-id=00000000000000000000000000000000}_0
    B  *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dbmssslib.so'
    How to resolve this issue. As it was mentioned in few forum we need to download the dbsl library from kernel patches and to load in kernel path. As my  db is DB2  can  we download dbmssslib.so this library and load in kernel file? Is it will work?
    Regards,
    Rai

    Hi Rai,
    This error indicates that the ABAP stack could not find the SAP DBSL for SQL Server (dbmssslib.dll) in the kernel directory. If you encounter this error on a Unix - based server the root cause is clear: the DBSL does not exist for other platforms than Windows or Linux x84_64. In this case use a Windows-based or a Linux x86_64-based SAP Application Server to establish the connection. If your system does not contain a Windows-based or a Linux x86_64-based Application Server you need to setup a small one as workaround. If you encounter this error on a Windows Application Server or a Linux x86_64 based Application Server make sure that the DBSL is properly installed in the kernel directory as explained in the document below.
    For more details on configuration and troubleshooting refer to below SCN document
    How to access an external Microsoft SQL Server database
    Hope this helps.
    Regards,
    Deepak Kori

  • No connection from SAP EP to Raytion SAP Connector

    Hello,
    The Raytion SAP connector 1.5.1 has been deployed without any problems on the customer SAP EP (Production). We see that no connection can be made from the SAP EP to this SAP Connector.
    Extract from the log file: (10.54.17.63 is the IP address from the Raytion SAP Connector server.)
    2008-04-03 13:30:40,082 DEBUG resource allowed by watched repository filter: true
    2008-04-03 13:30:40,097 DEBUG resource allowed by hidden filter: true
    2008-04-03 13:30:40,097 DEBUG resource allowed by size filter: true
    2008-04-03 13:30:40,097 DEBUG resource allowed by Exclude RegEx filter: true
    2008-04-03 13:30:40,097 DEBUG resource released by timebased service: true
    2008-04-03 13:30:40,097 DEBUG resource released by statemanagement service: true
    2008-04-03 13:30:40,191 INFO about to post /Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml
    2008-04-03 13:30:42,082 WARN could not connect to connector server at http://10.54.17.63:16050/DataSource. http://portaal:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml not sent! com.caucho.hessian.io.HessianProtocolException:
    2008-04-03 14:47:32,552 INFO Start security update initiated by Connector Server
    2008-04-03 14:47:34,240 WARN could not connect to security cache at http://10.54.17.63:16050/Security. Start update notification not sent! com.caucho.hessian.io.HessianProtocolException:
    2008-04-03 14:47:34,240 ERROR Could not send security synchronisation start notification. No server available.
    The contractor that installed this, thinks the next area to look to is to see if the SAP EP has been configured somehow to stop outgoing http traffic from applications running within it... Maybe the EP is blocking outgoing HTTP access, although other components from the EP are working OK.
    How can we check this?
    Please advise.
    Kind regards.

    Check the following Links:
    I want an explanation for this connection between R/3, CRM and IPC ??????
    Document flow from R/3 to CRM
    BP Changes From CRM to R/3
    BP Changes From CRM to R/3
    Reward Points if useful.

  • Remote Connection from SAP to MS-SQL server

    Hello Experts,
    We have been following 2 options so far and we have come across some issues
    The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
    We have been able to test this scenario successfully from SQL Server side
    However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
    While calling the stored procedure from the ABAP Code we have an error
                The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
                 "Access to the remote server     is denied because the current security context is not trusted."
    This issue is new after the SQL Server 2005.
    We are trying to resolve that.
    Secondly we have been trying the DBCON option as well as per OSS Note 323151
    We have a few things thatu2019s impacting our scenario:
    The remote servers are in a different domain
    The remote servers are located  in DIZ
    Remote server is a named instance
    Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
    The Database name starts with a numeric value
    Due a combination of factors as mentioned above the standard approach does not work
    Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
    Thanks in advance,

    Yes,
    DBConnect & UDConnect.
    Works like a charm.
    We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql).

  • RFC connection from SAP Data services to SAP ECC

    We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
    From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP  gateway and service is name is correct.
    Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
    Thanks in advance for helping to solve the RFC connection issue.
    Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

    I am new to SAP and we have just started work on Data Services.
    I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
    Thanks for your help and time.

  • Designer Connection from SAP R3

    Today it is possible to have connection from Designer to SAP R3, if possible I can send documentation about this issue is very important to our company know of their viability.
    I appreciate your help.
    Greetings

    Hi Ingo;
    We have SAP R/3 system running on Oracle Database. What I would like to ask is, is it possible to connect directly to the oracle to build a universe using R/3 tables in Oracle?
    Thanks in advance
    Dogus

  • SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database

    Dear All,
    Greetings!
    I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
    I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
    Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
    Thank you
    Regards,
    Vineeth Damodar

    Short answer: this does not work.
    Long answer: To connect directly to the database you need
    - a database client for the source system
    - a database interface library for the source system
    Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
    What you can do is: add a Windows application server to your  BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
    Markus

  • Connection from SAP ERP 6 to B1i2007

    Hello,
    the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
    The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
    Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
    I thought B1i would register automatically on the SAP with the name of the programm-id entered.
    Do we have to change someting in the tomcat-server or where to find the problem?
    Thank you,
    Peter

    Hello Eddy,
    thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
    And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
    I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
    I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
    Best regards,
    Peter

  • Connection from SAP to our systems involving 2 saprouters

    connection from SAP to our systems involving 2 saprouters
    we have 1 saprouter inside a dmz and another for connecting to our systems.
    we are guessing that this is possible
    SAP (sapserv2) -
    SNC----> saprouter1 (DMZ, SNC connection) -
    > saprouter2 (P * * 3200) ---> SAP1, SAP2...
    But how could we do that?
    How can we let SAP know that they need to connect to 2 saprouters instead of 1?
    The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
    And how should be the saproutettab of the 2 saprouters?
    saprouter1:
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
    P * saprouter2 3299
    saprouter2:
    P * * 3200
    P * * 3600
    is that possible?
    Many thanks !!

    Hi
    As far as my experience goes with this you have to maintain both router information in oss1 tcode
    Also mention second router on the second router tab on the SMP data
    I hope it should work with that as it will automatically create router table

  • Connection from DP to SAP PI 7.11 via SOAP/https failed

    Hello Guys,
    we have a problem with connection from DP to SAP PI via SOAP/https.
    DP send a request and get a timeout. timeout is 2 or 3 minutes.
    DP and SAP PI authentificated with certificates.
    Our Problems:
    DP get now failure code
    in commnication channel monitoring in RWB from SAP PI I see no entry, no error
    in java default trace I see no error.
    What could be the Problem? What must we configure for https communication via SOAP Adapter?
    Which Log get me some information?
    Thanks and regards
    Martin

    Hi Neetesh,
    I have check all, but it resolved not my problem.
    I will describe my scenario again:
    scenario:
    syncronous request from system A over DataPower ->SAP PI to SAP system.
    communication DataPower to PI: SOAP over https
    DataPower located in other network zone.
    port is activated in firewall.
    called URL from DataPower:
    https://<host>:5<instance number>01/XISOAPAdapter/MessageServlet?
    channel=:<business system>:<interface>
    Problem:
    authentication looks like ok. No error in ICM Trace, in default java
    trace login from DataPower IP-adress ok.
    but no message is to see in the communication channel.
    no message in the adapter engine, no message in the integration engine
    DataPower get a timeout. (Timeout 2  minutes)
    we find no error, but also no message
    What could be the error? And where find I some information in SAP PI.
    Thanks and regards
    Martin

Maybe you are looking for