SAP R-3 IDES 4.71 installation with Oracle9i
Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....
ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9776 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c 2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W0 (pid 2328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W5 (pid 2368) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W2 (pid 2344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W1 (pid 2336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W3 (pid 2352) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c 7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 589824 K
Config. maximum size : 1179648 K
Avail. maximum size : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1670224 K
Commit Charge Limit : 1676596 K
Commit Charge Peak : 1670376 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages : 0 K
Total heap size : 10729 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4108 K
Allocated heap memory : 4406 K
Moveable heap memory : 24 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR tskh_init: ThIPCInit
M *
M * TIME Sat May 18 00:29:02 2030
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c 346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting...
Similar Messages
-
SAP R/3 IDES 4.7 installation guide help.
Dear All,
My hard disk capacity is 160 GB.
I want to install SAP R/3 IDES 4.7 on Windows 2003 server.Let me know what should be partition size required for operation system and SAP.
Also forward installation guide for the above configuration to my email id [email protected] or forward the URL that have installation guide
Regards,
S.SureshHi ,
Please have a look
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sapr3.html
http://docs.mandragor.org/files/Operating_systems/BSDs/FreeBSD_Handbook/sapr3.html
This might help you.
Cheers
Deepanshu -
IDES ECC60 tib installation with Aronis
Hi all:
Here is the background, can anybody help me? Really appreciate!
Today I tried to install the ECC60 version with Aronis twice(restore one large tib file(about 47.1G) to my external portable hard disc). After 2 hours' recovery, I see 2 partitions on my portable hard disc, and there is no error during the installation. But after that, I can not start ECC server. Per the installation guide, I see from the pic that there are some shotcut on the desktop, while I can see nothing. So then I double click the SAP Management.exe from the folder, to see the error message like ".dll failed to register on drive C".
I see from one thread that may need to reboot from the disc where you restore the tib file to(in my case, that is my mobile disc). But I remember that XP and window2003 do not allow to boot computer with an external hard disc. Is the guide right?
Can anybody tell me: after the recovery, is there any other step needed? Many thanks~
Below are the steps I install:
1. Desktop with 120G's hard disc with 2 partitions. Drive C installed windows2003 while Drive D contain the large tib file(around 47G).
2. Restore the tib to the empty external hard disc(960G), after recovery, the hard disc is automatically formatted into 2 partition: DIRVE(C) and DIRVE(D), C with the operating system while D with SAP. The whole process is successful, no error.
3. After that, when I tried to launch SAP Management.exe, error message popper up which says the dll not registered on Drive C.
Thanks and Best regards
Tim> The Sap Management.exe resides in my external hard disc. There are 2 C drivers on my computer: one is where my operating system resides, that is the internal disc. the other is the recoveried system. I use Aronis to restore one .tib file to my external hard disc, after that, my external hard disc was automatically formatted into 2 partitions: C Driver and D Driver, and I launched the Sap Management.exe on the C Drive of my external disc.
So that means you have "two" C: drives?
> Did anybody once install ECC60 with Aronis? Or know what to do after recovery? I guess there should be some additional steps after recovery, since now there are 2 operating system on my computer: one is the original operating system while the other is the restored file system, but I don't know how to boot into that system.
I suggest you contact the backup software vendor how to use the software properly. You may need to enter a boot.ini entry to boot the second operating system. Also keep in mind that some windows filesystems are shared and that the latter installation may have overwritten parts of the first installation.
Markus -
SAP ECC 6.0 and EHP5 Installation with DIMP functionatilty
Hi Frineds,
We are installaing ECC6.0 and EHP5 fresh installation and looking for DIMP functionality too active in the system.
If we do only installation only Central Application Usage type then we can directly install EHP5 system (Central Application consist of SAP_APPL & EA-APPL).
But My question can we get the DIMP also after this installation type or we need to first install ECC6.0 and then upgrade EHP to get the DIMP function..I have not seen this answer any where in the guide or in SDN...
Thanks.Hi Manas,
ECC-DIMP is a add-on to ECC so you can install this add-on or perform a delta upgrade.
Relevant installation and support packages are available on SAP Service Marketplace.
Check Note 874473 - Release strategy for ECC-DIMP as of ECC 6.0
Many Thanks.
Ravindra Mirashi -
HELP ME IN step by step installation for sap 4.7 IDEAS AND sap 4.7 EE
HI
EXPERTS CAN ANYBODY GIVE STEP BY STEP INSTALLATION PROCESS FOR BOTH
SAP 4.7 IDEAS AND EE VERSIONS I AM NOT THAT MUCH PROFICIENT IN INSTALLING I HOPE U R GUIDLINES CAN MAKE ME CLEAR IN INSTALLING I HAVE SOME QUESTIONS RATHER THAN THIS TO ANSWER
1.IS THE ISTALLATION PROCESS OF ALL SAP VERSIONS ARE SAME?
2.WHAT IS AN OBJECT IN SAP?
3.WHAT IS THE DIFFERENCE BETWEEN COMPOSITE ROLE AND A DERIVED ROLE?
YOU CAN SEND ANSWERS TO MY MAIL ID:<b>[email protected]</b>
THANK YOU TO ALL IN ADVANCEHey Rajesh,
answers:
1) Yes, the installations procedures is almost the same for all SAP versions, however its advisible to use follow the installation guides which comes with the DVD or is also available in SAP marketplace..
2) Object is SAP is almost everything in Sap.
object could be anything like
TABLES
PROGRAMS
VIEW
FUNTTION MODULES
DOMAIN
DATA ELEMENT
STRUCTURE
and so on
3)Composite role is the combination of two or more roles(be it 2 or more single roles or combination of two or more composite roles or permutation of single and composite role).. whereas derived roles can inherit all authorization objects from the parent role and can have its own authorization objects as well..
Hope this clears your doubts.
Revert for any clarifications..
Please reward for usefull post.
Regards,
Anand. -
SAP 4.7 IDES Installation Procedure
Guys I request you to provide me with step by step procedure of installing SAP 4.7 IDES. I will be happy if u can help me in this.
[email protected] is my email ID.
Thanks & bye
srinivashello Srinivas,
Please check the installation guide at SAP Marketplace. It is the best possible documentation IMHO.
Please visit:
https://websmp102.sap-ag.de/instguides
Then select SAP Components---> SAP R/3 Enterprise.
Select the appropriate node for you and then in the list of installation guides that come up choose the one that is for your Database and OS combination. infact you should always provide this info.
Please award points if the answer was useful for you.
Regards.
Ruchit. -
SAP GUI 710 installation with BW 3.5 addon - BW Browser has disappeared
Dear all,
I hope someone can help with a BW 3.50 add-on problem following SAP GUI patching.
I'm doing a local installation of SAP GUI 710 Compilation 3.
I have selected the following three options:
1. SAP GUI for Windows 7.10 (Compilation 3)
2. BW 3.50 Add-On for SAP GUI 7.10
3. Business Explorer
(We require both BW add-ons for version reasons.)
Following this I have applied the SAP GUI Level 13 Patch (gui710_13-10002995.exe).
Up to this point, everything works as expected and I can still see the BW Browser at Start --> Programs --> Business Explorer --> Business Explorer (SAP BW 3.x) --> Browser (SAP BW 3.x)
However, when I apply the BW 3.50 Add-On Level 6 Patch (bw350gui710_6-10004473.exe) the Browser disappears from the menu and I can't locate it anywhere. A reboot wasn't required although I did this anyway with no visible effect.
I did try uninstalling everything and attempted the same process, but with SAP GUI Patch Level 12, and combinations with BW 3.50 Add-On Patch Level 4 but with the same result.
Has anyone else come across this issue, or know what has happened?
Thanks.We have a similar setup, utilizing all 3 as you do.
Since we are currently at Browser patch 4, eventually headed to patch 6, I threw your situation into our VM enviroment and tested the installation of Browser patch 6. Interesting enough, a clean install of Windows XP, Office 2003, and then GUI 7.10 with patch 13 and Browser 3.5 sp4 works as normal. Once I applied SP6 for the Browser, I still have the icon under the Start menu but the wdbbapp.exe is gone.
Thanks to the VM test enviroment, I was able to recreate the scenario in a few moments and this time prior to installing the patch 6 for the Browser, I set it up to catch all the changes the SAP installer makes when applying sp6.
The installation performed the following activity:
13 files added
4 files deleted
141 files updated
363 registry entries added
522 registry entries deleted
129 registry entries updated
Of the 4 files deleted, one of them is the BEx Browser (wdbbapp.exe) - which is why my shortcut won't work
Of the 13 added, none of them are the file being replaced.
Of the 141 modified, none are this file either.
I am still going through the log but have not seen anywhere it will make a difference if the file is not there.
Again, I am not saying there is a problem, perhaps they changed the way it is accessed, I am not fully up on the process of the BEx Browser. SAP may have something mentioned about it on their GUI/BEx site or a note, this is just my preliminary findings.
Regards,
Zecher -
Which files are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra SaktiHi Bhipra,
You need below DVDs for ERP 6.0 EHP6 IDES
51041985_11
DB2 USER ENV
70SWPM10SP06_4-20009707.sar
70SWPM10SP06
51044815_1
BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51044815_10
BD IDES SAP ERP 6.0 EHP6 Inst. Export 10 of 40
51044815_11
BD IDES SAP ERP 6.0 EHP6 Inst. Export 11 of 40
51044815_12
BD IDES SAP ERP 6.0 EHP6 Inst. Export 12 of 40
51044815_13
BD IDES SAP ERP 6.0 EHP6 Inst. Export 13 of 40
51044815_14
BD IDES SAP ERP 6.0 EHP6 Inst. Export 14 of 40
51044815_15
BD IDES SAP ERP 6.0 EHP6 Inst. Export 15 of 40
51044815_16
BD IDES SAP ERP 6.0 EHP6 Inst. Export 16 of 40
51044815_17
BD IDES SAP ERP 6.0 EHP6 Inst. Export 17 of 40
51044815_18
BD IDES SAP ERP 6.0 EHP6 Inst. Export 18 of 40
51044815_19
BD IDES SAP ERP 6.0 EHP6 Inst. Export 19 of 40
51044815_2
BD IDES SAP ERP 6.0 EHP6 Inst. Export 2 of 40
51044815_20
BD IDES SAP ERP 6.0 EHP6 Inst. Export 20 of 40
51044815_21
BD IDES SAP ERP 6.0 EHP6 Inst. Export 21 of 40
51044815_22
BD IDES SAP ERP 6.0 EHP6 Inst. Export 22 of 40
51044815_23
BD IDES SAP ERP 6.0 EHP6 Inst. Export 23 of 40
51044815_24
BD IDES SAP ERP 6.0 EHP6 Inst. Export 24 of 40
51044815_25
BD IDES SAP ERP 6.0 EHP6 Inst. Export 25 of 40
51044815_26
BD IDES SAP ERP 6.0 EHP6 Inst. Export 26 of 40
51044815_27
BD IDES SAP ERP 6.0 EHP6 Inst. Export 27 of 40
51044815_28
BD IDES SAP ERP 6.0 EHP6 Inst. Export 28 of 40
51044815_29
BD IDES SAP ERP 6.0 EHP6 Inst. Export 29 of 40
51044815_3
BD IDES SAP ERP 6.0 EHP6 Inst. Export 3 of 40
51044815_30
BD IDES SAP ERP 6.0 EHP6 Inst. Export 30 of 40
51044815_31
BD IDES SAP ERP 6.0 EHP6 Inst. Export 31 of 40
51044815_32
BD IDES SAP ERP 6.0 EHP6 Inst. Export 32 of 40
51044815_33
BD IDES SAP ERP 6.0 EHP6 Inst. Export 33 of 40
51044815_34
BD IDES SAP ERP 6.0 EHP6 Inst. Export 34 of 40
51044815_35
BD IDES SAP ERP 6.0 EHP6 Inst. Export 35 of 40
51044815_36
BD IDES SAP ERP 6.0 EHP6 Inst. Export 36 of 40
51044815_37
BD IDES SAP ERP 6.0 EHP6 Inst. Export 37 of 40
51044815_38
BD IDES SAP ERP 6.0 EHP6 Inst. Export 38 of 40
51044815_39
BD IDES SAP ERP 6.0 EHP6 Inst. Export 39 of 40
51044815_4
BD IDES SAP ERP 6.0 EHP6 Inst. Export 4 of 40
51044815_40
BD IDES SAP ERP 6.0 EHP6 Inst. Export 40 of 40
51044815_5
BD IDES SAP ERP 6.0 EHP6 Inst. Export 5 of 40
51044815_6
BD IDES SAP ERP 6.0 EHP6 Inst. Export 6 of 40
51044815_7
BD IDES SAP ERP 6.0 EHP6 Inst. Export 7 of 40
51044815_8
BD IDES SAP ERP 6.0 EHP6 Inst. Export 8 of 40
51044815_9
BD IDES SAP ERP 6.0 EHP6 Inst. Export 9 of 40
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
Hope this helps.
Regards,
Deepak Kori -
SAP ECC6.0 installation with Oracle RAC
Hi Expert,
Current we working on SAP ECC6.0 installation with Oracle 10G RAC on AIX 5.3. The RAC are running on two nodes (servers). And we are using GPFS filesystem (not running on HACMP).
Overall we had completed the Oracle RAC installation (CRS+RDBMS) and tested the oracle failover and it work find. Now we want to start with the SAP installation (with HA). In the SAP installation documentation, it did request to create a virtual hostname on the node and execute the sapinst scripts with below command line.
#./sapinst SAPINST_USE_HOSTNAME=ascs00
But if we are running on Oracle RAC + GPFS do we need to specify the virtual hostname? If not, which hostname i should use to install the HA for SAP? Please advice.
Regards.And then I'd continue with the documentation at:
SAP on Oracle => SAP on Oracle Real Application Clusters (RAC)
There you can find several installation guides for windows/UNIX/Linux -
Which file are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra SaktiHi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti -
SAP ECC6.0 IDES Installation on VMware ESX
SAP Experts...
I am having problem installing SAP ECC6.0 IDES (with oracle) to VMware ESX server due to limitation of vmware create space up to 250GB max. SAP required at least 288GB for database space.
what I want to do is install IDES as local machine with ABAP + Java.
Does anyone have experience with install IDES as local machine on VMware? any clue, solution or sapnote is greatly appreciated.
Thanks in advance.
Irianto.> I am having problem installing SAP ECC6.0 IDES (with oracle) to VMware ESX server due to limitation of vmware create space up to 250GB max. SAP required at least 288GB for database space.
VMWare ESX can use LUNs up to 2 TB. You could also create two disks and configure a RAID-5 on Windows.
Oracle is not supported under VMWare.
Markus -
Problem in SAP Server installation with Oracle DB
Hi,
We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying to download in Service market place. But we could not get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
We are struck with our SAP Server installation. Please consider this issue as very urgent.
thanks in advance.
Regards,
Mohankumar.GHello Mohan,
Please specify which installation your are doing otherwise it is difficult to provide you
the correct path.
For eg if you are doing NW04's installation then path will be
downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
hope it helps..
Regards,
Jafer -
Sap ides 4.7 installation on win xp
hi guru's
well i was looking for the document on how to nstsall SAP IDES 4.7 on WINDOWS XP..
can anyone please lemme know the process i have ides 4.7 dvds with me
[email protected]
thank you .what you are asking is completely illegal. anyways, look on your DVD for PDF files. install guide is there.
and... SAP server products are not supported on Windows XP. only client products such as SAPGUI are supported on XP. -
Delete SAP Installation with SAPMaxDB under Windows2003
Hi,
The SAP ID "DEC" with SAPMaxDB is now only bringing in the status Offline or Admin but not in status Online.
Now I have a time problem.
I will delete this SAP Instanz manuelly and after then I will start a "new" installation with the same SAP SID and DB ID (DEC). But witch entry in the Windows I must delete. I don't know.
Thank you for your help.
Regards
Richard> The SAP ID "DEC" with SAPMaxDB is now only bringing in the status Offline or Admin but not in status Online.
Did you try to figure why it is failing? Logs (knldiag? KnlMsg)?
> Now I have a time problem.
> I will delete this SAP Instanz manuelly and after then I will start a "new" installation with the same SAP SID and DB ID (DEC). But witch entry in the Windows I must delete. I don't know.
What application is that? you can use sapinst to uninstall.
Markus -
SAP Installation with DB2/LINEX ,User creation error
Dear All,
I have started sap installation with DB2/lLinex at the moment i am struggling in step 2:Creating user for sap system
Error:Invalid password DIAGNOSIS .The password you specified for user db2ec1 is wrong .(CJS -20004 :Invalid password DIAGNOSIS)
Solution:Enter the correct password .
Please advice how to correct the issue ..
Thanks,
Rajmohan .sHi Dinesh Sadasivan,
While doing the sap installation please avoid using special character in password. Use the simple password like password123.
One more thing is that also cross check the password policy from your os admin, like complexity lenth etc. If its there then tell him to temporary disable the policy.
Regards,
Kamal
Maybe you are looking for
-
Dropdown list in WebDynpro for ABAP
Hello, I develop programs by using WebDynopro for ABAP and Interactive Forms. I'd llike to use Drop-downs UI elements on Interactive Forms. SAP material says "The WebDynpro Drop downs UI elements in the LiveCycle designer do not work in ABAP WD" see
-
ORA-20100: File o0298639.tmp creation for FND_FILE failed in 11.5.10.2
Hi I need Some help here. User DO NOT have any issues running the concurrent Programs (11.5.10.2) with 10.2.0.4 database on HP_UNIX. But have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749
-
Creating keyboard shortcuts in acrobat 9
Hi All, Is there a method for a user to create their own keyboard shortcuts in Acrobat 9? Or is there a add-on/program that'll let one do that? Thanks, Starsky
-
Hello, I am trying to calculate the coherence of a stimulus and response signal using the Network Functions (avg) VI's. The problem is that I always get a coherence of "1" at all frequencies. This problem is already known (see KnowledgeBase document:
-
Hi I want to know that if an RFC is synchronous or asynchronous processing? Thank You