SAP R/3(IDOC) to SAP XI to HTTP and RETURN Through SAP XI to SAP R/3

Hello Friends,
i have to do this object..
i am not familiar with this subject...
 SAP R/3 to SAP XI to HTTP Server then it comes back through SAP XI to SAP R/3
1.What i have to use?
2.how can i configure?
3.which adapters,servers etc..i have to use?
4. where i have to use?
please explain from scratch ...
when i send P.O (IDOC) request that goes to HTTP server then that particular request takes data from that HTTP server then it comes back to SAP R/3..
can i use BPM?
how can i use BPM ?
so, please give full details ..if ther any object please forward to me..
i am waiting for your response?
thank you very much,
Regards,
sharath

You will use the HTTP adapter and the IDoc adapter.
I would recommend checking out a blog that shows XI from scratch. Such as this one:
/people/james.guanzon/blog/2006/02/22/how-to-support-industry-standards-in-xi-part-i-of-iii--interfaces

Similar Messages

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to save file in SAP fold

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

Call external URL from ABAP userexit, capture data and return it to SAP?

My apologies if this question has been asked before, but I've searched for a few hours today and haven't found anything directly related to my question. Thank you in advance for any help you may be able to provide!
I would like to be able to make a call from an SAP userexit during Sales Order Entry in the VA01 transaction in the SD module to an external website, allow the user to capture some data in the external site and then pass that data back into the userexit where I can use it to populate internal tables, etc.
I'm completely unfamiliar with Web Dynpro programming, but this seems like a good place to start my search for a solution.
Does this sound like a problem that can be solved with Web Dynpro and what documentation or code examples should I reference to go about building such a solution.
I should also note that I'm hoping to build a solution that could be called from any userexit in R/3, SAP ERP, SAP CRM, etc. and would obviously need to learn about what dependencies to consider (ex: SAP GUI version, SAP product release number, Web AS release, etc.).
Eric

Thank you for the response. Let me provide some additional information.
The external application will be a Hosted Web page. It is not an SAP system.
The external application will be a web page served by a separate system outside of the company domain(shouldn't matter what the technology is I would think - but the web page will be hosted by a different company than the one calling the URL) that would appear as a web page in which the user will enter data, logic will be performed on that data and then some or all of the data would need to be passed back to the calling point in SAP.
For practical discussions it doesn't matter to me if the call in ABAP occurs in an SD userexit, in a custom report, in an HR screen or in a CRM business partner screen. There will be many places where this external application may be called from and I'm just trying to figure out how to call an external HTTPS URL and return data from that web page to the calling point in ABAP.
I hope that clarifies my question.
Thanks!
Eric

Configuration SAP EP systems in HTTPS and SSL

Hi,
Can anyone tell me the regarding the configuration SAP EP systems in HTTPS and SSL.
The scenario is Client -->Application gateway( Web Dispatcher) -->EP6
Regards,
Moulinath Ray

Hi,
I am giving to you the steps we do for our securization (EP 7.0):
Prerequisites:
-Download SAP Cryptographic ToolKit at http://service.sap.com/ swdc and -> SAP Crypto-graphic Software -> SAP JAVA CryptoToolkit (J2EE Engine as of Release 6.30)
-Unzip it with SAPCAR
Logon in SDM and deploy the file
Check in Visual Admin -> Dispatcher/Server -> Libraries -> core_libs iaik_jce.jar is included
Loof for SSL Service in Config Tool in Server and Dispatcher, it should be "always"
Steps:
-Asking for a certificate
Visual Admin -> Cluster -> Server (central instance ) -> Services -> Key storage -> Service_ssl -> Create
Fill in all the data, and be careful with the common name:
-It shouldn´t have "http" or "https" on it
-It shouldn´t have port number on it
For example: "https
www.myportal.domain:port", the common name should be "www.myportal.domain"
Visual Admin -> Key Storage -> service_ssl -> Select your certificate and u201CGenerate CSR Requestu201D
Send the file to a CA
-Importing the validated certificate:
Visual Admin -> Key Storage -> Import CSR Response
In each Server, under SSL Provider, assign the certificate to port 50001, in each Dispatcher
Now, the portal is secure, and you can check it now.
A last step would be export the certificate and send it to your Network Team, so they can export it in the load balancing server, reverse proxy, etc.
You can have a look at this link:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Some of the threads link:
/message/5568001#5568001
/thread/853387
Regards,
Niraj
Edited by: Niraj Kumar on Jan 22, 2009 3:59 PM

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Difference in idoc adapter header mapping between SP14 and SP19

Hi All,
i have a very strange problem.......i have 2 XI systems : XI-sandbox and XI-dev.....
XI-sandbox is on XI3.0 SP19 whereas XI-dev is on XI3.0 SP14...........
I have a file->XI->idoc scenario which is same on both XI-sandbox and XI-dev....
in receiver idoc adapter, i am using header mapping for sender service and in the sender service i am using XPATH of a field of control rec of idoc.........
this scenario works fine on XI-sandbox which is on SP19 and the idocs are sent to SAP R/3 sandbox...........but this scenario on XI-dev gives error in SXMB_MONI in XI-dev of Call adapter - "No party conversion found".........
So my question is that is there any difference in idoc adapter header mapping between SP14 and SP19.........
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA

>so i cant use apply control rec values from payload.........
rajeev,
I know this has nothing to do with the original problem but please do bear.
If I undertood you posts correct, the Sender Partner Name is set in the Idoc Control record in the field SNDPRN in the mapping using some mapping logic.
Now, this is the partner name with which the idoc is to be posted to thge R3 system.
if yes, then like I have pointed above, using "Take Sender From Payload" in the Receivcer Idoc Adapter is a better option as pointed in the SAP help as well.
As you are already populating the idoc control ecord with SNDPRN just make the SNDPRT as LS and then select "Take Sender from Payload" in the receiver Idoc adapter and the Sender Partner Name will not be taken from SDNPRN just as you want.
This is different from "Apply Control Records From Payload" .
Regards
Bhavesh
PS : you can ignore this reply if the situatios is too late to make this change and thanks for the patience.

Diff... between ALE, IDOC, RFC, BAPI, BADI --- Not clear and clarify

Hi All
    I am learning XI and the difference between " ALE, IDOC, RFC, BAPI, BADI "
    Not clear and when to use what and how in point of XI ?
   Pl..clarify me
Adv..thanks and points
--- Rakesh Behera

Hi
This will expalin you every thing ...pl..go through
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
I hope this will help you to understand the difference bet..those
regards
--- prasad

How to tranfer IDOC and BAPI through LSMW

Hi friends,
I need documents regarding processing of IDOC and BAPi through LSMW,
Thanks In advance,
Regards,
charan

Hi
LSMW-BAPI
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed
It is given in screen shot.
http://www.****************
LSMW-IDOC
see this and do accordingly
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
Go through the steps
Hi please go through the following steps for IDOC method
Step 1. Run the transaction ( /nlsmw ) you will reach to the screen
Here you have to specify
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( MEssage type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign)
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Reward points for useful Answers
Regards
Anji

Mapping Street2 and Street3 through idoc CREMAS

Hi
Is there a way to populate the fields STREET2 and STREET3 through the idoc CREMAS05?
Thanks
Nag

Hi Kris
Thanks for the info. But i could not find any table structure in the BAPI_BUPA_ADDRESS_CHANGE fn which holds the STREET2 and STREET3. Can you provide further info?
Thanks for your inputs so far.
Nag

Want to trigegr an idoc only if done manual intervention and not automatic

We have a requirement where the idoc needs to be generated only if a user creates the it, and not through automated process.
The particular idoc is the delivery idoc.We can manually create delivery, then only the delivery idoc should be created,else it should not be created.We have process in place by which you can automate the creation of delivery by inbound processes.We do not use any workflow in oursystem.
Any Help would be greatly appreciated.

Hi,
Firstly i didnt get the diff b/w manual and automatic.
If automatic does mean Background job running, check the field BATCH in the structure SYST.
IF sy-batch IS INITIAL. " This is foreground.
check for the other variables in the structure syst and find the diff b/w these fields in manual and automatic modes; and use IF conditions appropriately.
reward if helpful,
regards,
teja.

Any IDOC in CRM available to exchange delivery data through EDI

Hi CRM guyz,
Is there any IDOC available post the delivery data with third party from CRM.
FYI
We are using CRM 5.0.
Communication is through EDI signals.
Order status(like delivery etc) is flows to CRM from from R/3
Thank you,
Pavan Pagolu

Hi Raju,
If you are using Idoc WMMBXY02 or any WMMBXY* ,and if you want to receive against the delivery, you have to populate the Idoc field E1MBXYI-KZBEW with 'B' and populate field E1MBXYJ-VLIEF_AVIS with your delivery number (don't forget to pad with leading two zeros).
This will work. Try it and let me know. I am sure it will work.
Rajesh

Sendind idoc tcode foe msg type WVINVE and WPUUMS

Dear All,
What is the tcode for sending phy inventory data through IDOC message typy WVINVE, and also for message type WPUUMS POS interface: Upload sales data (Compressed)
Ex: BD10 for sending material.
Thanks and regards,
Arun.

Hi,
Wpuums is inbound IDOC so you can crete this IDOC with the help of We19
and for testing purpoase u can use WPUK tcode
Thanks
Amit Shivhare

Standard Idoc for Goods Issue from MIGO and standard BADI to do the MIGO-GI

Hi Gurus
What is the standard IDoc for Goods Issue from MIGIO and standard BADI that takes care of Goods Issue from MIGO?
Thanks

BADI :
MB_MIGO_ITEM_BADI
MB_MIGO_BADI
Idocs:
/ISDFPS/GOODSMVT_SAPCREATE01
/CWM/MBGMCR01

SAP ECC Interface w/ IDOC-XML using TCP/IP, HTTP, or FTP to 3rd-Party Syst.

I am trying to understand if the following interface options can occur (without the use of SAP PI or any other middleware):
Option 1A: Can I process an SAP ECC outbound IDoc in XML using TCP/IP to a non-SAP 3rd party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 1B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used TCP/IP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 2A: Can I process an SAP ECC outbound IDOC in XML using HTTP to a non-SAP 3rd-party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 2B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used HTTP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 3A: Can I process an SAP ECC outbound IDOC in XML using FTP to a non-SAP 3rd-party system? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?
Option 3B: Can I process an SAP ECC inbound XML-IDOC from a non-SAP calling system that used FTP? Can you please explain the reason for why I can or can NOT do this. If possible, please provide supporting documentation on how-to do this?

Hello Kirk ,
The answers for your question are:
Option 1A: Yes you can .you can use TCP/IP but you must have a middleware component for that such as BC/JCO .
Please see the link : [http://help.sap.com/saphelp_nw04/helpdata/EN/09/c88442a07b0e53e10000000a155106/frameset.htm]
Option 1B: See the link above.
Option 2A: You can use ABAP code :
[http://help.sap.com/saphelp_nw04/helpdata/EN/e5/4d3514c11411d4ad310000e83539c3/frameset.htm]
Option 2B: [http://help.sap.com/saphelp_nw04/helpdata/EN/90/4f3c2ec3c511d6b2b400508b6b8a93/frameset.htm]
Option 3A: Only with ABAP code :[Reg: FTP Connection;
Option 3B: See the link of Option 3A.
Good Luck,
Boaz
Edited by: Boaz Ornan on Feb 21, 2010 4:33 PM

Query and return attributes from SAP R/3

Hi All,
Please help in how to fetch attributes from SAP R/3 and display in IDM.
There is an attribute which will have list of names and id's in SAP R/3 we need to fetch that information from SAP R/3 and display that information in SUN IDM.
We are Using JCO adapter.
Pls help me in this.

You can get a list of users on an SAP system with the bapi function "BAPI_USER_GETLIST". I don't see that function used by the resource adapter for SAP. You can write some Java code to call "BAPI_USER_GETLIST" and write a rule to access it.

SAP R/3(IDOC) to SAP XI to HTTP and RETURN Through SAP XI to SAP R/3

Similar Messages

Maybe you are looking for