SAP R/3 MMC Problem

Hello Seniors,
When I am opening the R/3 MMC, I am getting the console. but in that I am unable to expand the console. I am unable to see my server and hence unable to start my server. I am using R/3 4.7. I have this installed in P4 system with 512RAM, 160GB. It got installed well and worked fine for some days but now I am facing some problem with it. This problem started after I shut my system without stopping the server. Please provide a solution for this as i haven't uninstalled it yet.
Thank You,
Sagar.

Hi Sagar,
Check my reply to your another thread.
Regards
Ganesh

Similar Messages

SAP Adapter has a problem, SOD violations will not be checked

Hi,
In our ides server whenever i click save button in su01 i get the following error ,
"SAP Adapter has a problem, SOD violations will not be checked !
Please check with your system Administrator
Technical Info:
Error when opening an RFC connection "
we didn't have this problem before . can anybody help me to resolve the issue
Also I am getting this error only if I click save in su01. in other t code. I don't get this error
Thanks in Advance
Edited by: gajula jhansi on Apr 11, 2011 11:28 AM

You need to restart your sap adapter in GRC front end from configurations tab-->Sap adapter >choose the one for your back end system> if it's grayed out or even green still, click on it and let it restart and turn green again.
Then you go back to your backend ECC system and in SM59 , choose the RFC connection for the Risk Terminator (the one you have saved in the Risk Terminator transaction /VIRSA/ZRTCNFG in backend system).. and test the connection. It should pass the connection test if your adapter is working and set up correctly. Then when you do save in SU01 or make changes in PFCG and have Risk Terminator activated for the backend system, it will check the SOD violations against those transactions from RAR front end.
If you don't want Risk Terminator to check for SOD violations in front end RAR, then you need to set your settings to 'NO' for all in the Risk Terminator transaction. You can get all this info in the GRC config guide for RAR and SPM area.
Regards,
Alley

Sap MMC problem

DEAR ALL,
today morning after 2hrs of office start, users session was automatically logged off
i tried to check with login in SIDADM & i found that all processes were in stopped status & instance was greyed out
i check services, & database connectivity both working fine hence i restart server
then i come to know that all content in sap mmc was vanished it was very horrible & i am getting panic foe that
is anybody has any idea why this is happening
Edited by: amol_dounde30 on May 13, 2011 2:27 PM
Edited by: amol_dounde30 on May 13, 2011 2:27 PM

Dear All,
Problem Solved
Thanks

SAP MMC problem on database instance

Hi,
We successfully installed the solution manager ehp1 on distributed environmnet(windows with sql) and also iam able to login SAP,but iam unable to see the system on SAP MMC on database instance.
Thanku

Can you please download and install new SAP MMC.
You can manually configure it to see all systems you installed..
But SAP MMC will not automatically install on DB instances.
Yogesh

Solution Manager MMC Problems

HI Gurus
I have installed SAP Solution Manager, Installation successfull..
I have stopped and started the SAP MMC.. give errors in
kindly look below the developer trace i have pasted
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid S40
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 4060
Thu Jun 05 12:25:08 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4060) [dpxxdisp.c 1237]
 shared lib "dw_xml.dll" version 75 successfully loaded
 shared lib "dw_xtc.dll" version 75 successfully loaded
 shared lib "dw_stl.dll" version 75 successfully loaded
 shared lib "dw_gui.dll" version 75 successfully loaded
 shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Jun 05 12:25:12 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SOLMON_S40_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07790040, size: 4647736)
DpShMCreate: allocated sys_adm at 07790040
DpShMCreate: allocated wp_adm at 07791E40
DpShMCreate: allocated tm_adm_list at 07794FC0
DpShMCreate: allocated tm_adm at 07794FF0
DpShMCreate: allocated wp_ca_adm at 07B64290
DpShMCreate: allocated appc_ca_adm at 07B6A050
DpShMCreate: allocated comm_adm at 07B6BF90
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07BECE50
DpShMCreate: allocated gw_adm at 07BECE90
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07BECEC0
DpShMCreate: allocated wall_adm at 07BECEC8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
ERROR => DpForkExec: CreateProcess (123: Unknown error) [dpntdisp.c 1441]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess123) [dpntdisp.c 1443]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 23054336 K
Config. maximum size : 25149440 K
Avail. maximum size : 25149440 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
2095104 K
2
d:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
3
e:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
4
f:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
5
g:\pagefile.sys
8388608 K
8388608 K
8388608 K
8372224 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1682380 K
Commit Charge Limit : 24979372 K
Commit Charge Peak : 2989120 K
Phys.Memory Total : 54 K
Phys.Memory Available : 88721880 K
File Cache : 1946181504 K
Kernel Memory Total : 2084091208 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 88721908 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1082640 K
Private Pages : 0 K
Total heap size : 13970 K
Virtual memory regions : 0 K
Uncommitted heap memory : 7124 K
Allocated heap memory : 6729 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
3616
msg_server.EXE
[MS] S40_00
8132 K
8132 K
10272 K
10272 K
2
3624
enserver.EXE
[**] S40_00
13764 K
13764 K
54392 K
54392 K
3
612
sapstartsrv.exe
16228 K
16264 K
18432 K
18472 K
4
4052
msg_server.EXE
[MS] S40_01
8464 K
8464 K
10660 K
10660 K
2
4060
disp+work.EXE
34084 K
34148 K
65916 K
66020 K
8
4072
igswd.EXE
[**] S40_01
2960 K
3192 K
1488 K
1756 K
0
1976
igsmux.exe
12092 K
12092 K
13264 K
13264 K
2
2024
igspw.exe
2828 K
2828 K
2420 K
2420 K
0
2068
igspw.exe
2828 K
2828 K
2420 K
2420 K
0
3580
gwrd.EXE
3208 K
3208 K
5924 K
5924 K
0
3160
icman.EXE
3452 K
3452 K
6652 K
6652 K
0
Sum
108040 K
191840 K
DpJ2eeStart: j2ee state = INIT
ERROR => DpProcCreate: DpJ2eeStart failed [dpxxdisp.c 12251]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( SOLMON) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >SOLMON_S40_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Jun 05 12:25:15 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
can anyone help me in this
regards

Hi Ronald,
It seems to me that ABAP is running but J2EE startup framework have some problems.
Can you confirm that? What WP's can you see? Can you observe the windows processes
on startup (most suitable with ProcessExplorer from [Sysinternals|http://technet.microsoft.com/de-de/sysinternals/default(en-us).aspx]). What happen on startup?
Additionally can you update the kernel? Patchlevel 75 is a little bit old, the most current is ~161.
Regards
Holger

SAP 4.7 IDES problem

Hi,
I am using SAP 4.7 IDES version. It was working fine. But all of the sudden I found entire tree in the server start up page was missing and I am unable start my SAP server. Can anybody help me how to rectify this problem?
Narendra

hi
Try the following command , logging as sidadm.
sapstartsrv.
Give the exact details , client System number, profile . You will get the tree in the MMC
If the answer is helpful, please reward with points
Regards
Prasanna.B.S

SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7

Hi,
I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
"dev_w1" 456 lines, 18662 characters
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid KZP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 22022
M
M
M Fri Jan 29 15:11:00 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c 1144]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/KZP/920_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPKZP's password
C Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Got SAPKZP's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
C Now I'm disconnected from ORACLE
C Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100129 151100 sapkzpn2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Jan 29 15:11:07 2010
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff7597a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xffffffff62000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff75db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff71f00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7bc00000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 1, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Fri Jan 29 15:11:08 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106aa11e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Fri Jan 29 15:11:09 2010
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
I *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c 1525]
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
[2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
[3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
[4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
[5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
[6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
[7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
[8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
[9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
[10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
[11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
A
A Fri Jan 29 15:11:10 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil) [mmxx.c 2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Fri Jan 29 15:11:10 2010
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
A Function ab_pbinit Line 1754.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
A
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15213]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c 9696]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M ThErrPrivHandle: set th_errno (5)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c 10129]
M
M Modeinfo for User T1/M0
M
M
M call ThrShutDown (1)...
A Saving PXA statistics.
M -
C-STACK -
[0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
[1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
M -
M ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c 902]
M in_ThErrHandle: 2
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c 9717]
M -
C-STACK -
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
[2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
[3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
[4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
[6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
c
[7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
[8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
[10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
[11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
M -
M Fri Jan 29 15:11:11 2010
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c 318]
Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
Best regards,

Also dev_disp is like below:
sid KZP
systemid 370 (Solaris on SPARCV9 CPU)
relno 6400
patchlevel 0
patchno 221
intno 20020600
make: single threaded, Unicode, 64 bit
pid 22016
***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c 1104]
 shared lib "dw_xml.so" version 221 successfully loaded
 shared lib "dw_xtc.so" version 221 successfully loaded
 shared lib "dw_stl.so" version 221 successfully loaded
 shared lib "dw_gui.so" version 221 successfully loaded
 shared lib "dw_mdm.so" version 221 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >sapkzpn2_KZP_00 <
DpShMCreate: sizeof(wp_adm) 10752 (1344)
DpShMCreate: sizeof(tm_adm) 3728952 (18552)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpShMCreate: sizeof(comm_adm) 316000 (632)
DpShMCreate: sizeof(vmc_adm) 0 (560)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff70c00000, size: 4181592)
DpShMCreate: allocated sys_adm at 0xffffffff70c00000
DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff70fea208
DpShMCreate: allocated wall_adm at 0xffffffff70fea210
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Jan 29 15:11:07 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1490]
***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Jan 29 15:11:08 2010
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
Fri Jan 29 15:11:29 2010
ERROR => W0 (pid 22021) died [dpxxdisp.c 12698]
ERROR => W2 (pid 22023) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W3 (pid 22024) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W4 (pid 22025) died [dpxxdisp.c 12698]
ERROR => W5 (pid 22028) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W6 (pid 22030) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W7 (pid 22038) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa1 --> 0x81
Fri Jan 29 15:12:08 2010
ERROR => W1 (pid 22022) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-22021 (SIGUSR2)
ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-22022 (SIGUSR2)
ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-22023 (SIGUSR2)
ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-22024 (SIGUSR2)
killing W7-22038 (SIGUSR2)
ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:18 2010
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Jan 29 09:12:18 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 22021 Ended no 1 0 78 SAPSYS
1 DIA 22022 Ended no 1 0 78 SAPSYS
2 UPD 22023 Ended no 1 0 78 SAPSYS
3 ENQ 22024 Ended no 1 0 78 SAPSYS
4 BTC 22025 Ended no 1 0 78 SAPSYS
5 BTC 22028 Ended no 1 0 78 SAPSYS
6 SPO 22030 Ended no 1 0 71 SAPSYS
7 UP2 22038 Ended no 1 0 71 SAPSYS
Dispatcher Queue Statistics Fri Jan 29 09:12:18 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Fri Jan 29 09:12:18 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Jan 29 09:12:18 2010
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:23 2010
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >sapkzpn2_KZP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing proc (22019) (SOFT_KILL)
Stop icman
killing proc (22020) (SOFT_KILL)
Terminate gui connections
kill(22019,0) successful -> process alive
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:24 2010
NiISelect: TIMEOUT occured (1000 ms)
kill(22019,0) -> ESRCH: process died
kill(22020,0) -> ESRCH: process died
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00 <)
NiIMyHostName: hostname = 'sapkzpn2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 1, 3 )
ShmKeySharedMMU( 1 ) = 0 (octal)
ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 2, 3 )
ShmKeySharedMMU( 2 ) = 0 (octal)
ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 3, 3 )
ShmKeySharedMMU( 3 ) = 0 (octal)
ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmProtect( 4, 3 )
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmProtect( 14, 3 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
ShmProtect( 11, 3 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmProtect( 19, 3 )
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmProtect( 33, 3 )
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmProtect( 41, 3 )
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmKeySharedMMU( 40 ) = 0 (octal)
ShmProtect( 40, 3 )
ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
ShmProtect( 42, 3 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmKeySharedMMU( 31 ) = 0 (octal)
ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 1 (type=2)
NiICloseHandle: shutdown and close hdl 1 / socket 8
DpDelSocketInfo: del info for socket 2 (type=1)
NiBufClose: clear extensions for hdl 2
NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 2 / socket 9
***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c 9033]
shutdown completed - server stopped ***
Good Bye .....
Could you please help me about this issue?
Best regards

SAP Business Connector certificate problem

We are trying trying to send data from SAP to bank via SAP business connector using bank URL. We have configured the certificates in SAP BC which are authenticated by bank on the basis of private key generated from our server. Now when we trying to post data to bank it is giving below error.
java.lang.RuntimeException: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by TrustDecider
Any idea? Please give me some suggestions to resole this problem.
Thanks and Regards

Normally I do not like to give documentation references, but in this case I think it makes sense. Certificate handling is an ugly and complicated topic, so many things can go wrong. Please check the SAP BC 4.7 Administration Guide, page 103 onwards ("Securing communications with the server"). It explains very well what needs to be done. Make sure you configured everything correctly.
CSY

SAP Note Number 1535966 problem with IDWTFILE_US_1042.XML

Dear Colleagues,
I have installed the new SAP note for the 1099 from for Tax year of 2010 (note Nr.1535966).
at Step 7 when I upload the IDWTFILE_US_1042.XML file, the activation of this files fails and gives the following error messages:
Error in node WH Agent Contact: source field IDWTADD-US_AGENT_NAME does not exist
Message no. DMEE_ABA306
Error in node WH Agent Dept.: source field IDWTADD-US_DEPT_TITLE does not exist
Message no. DMEE_ABA306
My Platform is as follow:
SAP_ABA     700     0013     SAPKA70013     Cross-Application Component
SAP_BASIS     700     0015     SAPKB70015     SAP Basis Component
PI_BASIS     2005_1_700     0013     SAPKIPYJ7D     PI_BASIS 2005_1_700
ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
SAP_BW     700     0015     SAPKW70015     SAP NetWeaver BI 7.0
SAP_AP     700     0009     SAPKNA7009     SAP Application Platform
SAP_APPL     600     0010     SAPKH60010     Logistics and Accounting
SAP_HR     600     0018     SAPKE60018     Human Resources
FI-CA     600     0010     SAPK-60010INFICA     FI-CA
FI-CAX     600     0010     SAPK-60010INFICAX     FI-CA Extended
Have you had this problem? do you know of a solution? It seems to me that the relevant IDWTFILE_US_1042.XML file must be incorrect!
Help is greatly appreciated.
Thank you.
Regards;
Hameed

Hi Cheryl,
I used the trx SMARTFORMS to upload all of the forms mentioned. This earlier thread with one of my questions answered might be helpful to you.
OSS Note 1535966 - a Smartforms question
Also, you may need to change the package for some of the forms to ID-FI-US as the note suggests. Use trx SE03 to change the package for a form that might not already be in package ID-FI-US.
We only use form MISC and none of the others, but I uploaded and did the note steps for all anyway.
I think this note lacks a bit of clarity.
Thanks
Jeremy

User migration vom SAP DB to LDAP: Problem when userId not equal to logonId

Hello
I have to write a migration tool which migrates the users stored in the SAP DB to LDAP. Thereby the logon ID of the users in the SAP DB is not equal to the user ID.
The migration works fine and in SAP Identity Management (IDM) everything is ok.
But when I try to log onto the portal with a migrated user, the portal tells me that no portal role is assigned to the user. But the IDM shows clearly that the portal role is assigned to the user.
Investigation showed that when I create in the LDAP a user with the same logon ID and user ID, the log onto the portal works ok. As soon the logon ID differs from the user ID, the portal does not find the assigned portal role anymore, although in IDM everything works.
How can I solve this problem? It is important that the logon ID and the user ID are different as otherwise all the stored data has wrong references.
Greetings
Rolf
Edited by: Rolf Grüninger on Jul 19, 2011 6:08 PM

Problem solved:
The naming attribute of the user account has to be set to the same attribute as the one of the user object and not to the user logon ID.

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its ->webgui
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

SAP Web AS Connection Problem

Hi Gurus,
I am now facing one problem about creating a system in EP.
My system is Netweaver 04s with AS,EP and BI with SP13. All run in one single server.
I maintained the SAP Web AS, and tested the connection, got the following message:
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.2.62:50000)
5. The host name 192.168.2.62 was resolved successfully.
6. The server 192.168.2.62 could not be pinged successfully.
Strange that the ping fails, cause all the instances are running in the same server.
"Connection Test for Connectors" works fine for me by using SSO from portal to abap.
Please give the solution.
Thanks & Regards

Hi,
You mean to say you are using IP address to login to portal. Using IP address has caused many problems. I am not sure if this would solve your issue but it is always recommended to use fully qualified domain name as host while accesssing portal. You can check using that too.
Regards,
Harini S

SAP Business One Speed problem

Hello All
We are using a SAP B1 2007 PL12 and facing a very big problem of performance or Speed currently our database size is more than 50gb and now our consultant recommend us to upgrade 2007 to 8.8. can this upgrade resolve our problem or not?

Dear,
Check : upgrading sap business one version 800232 is not allowed
This may give you helpful information.
Regards,
Syed Hussain.

SAP Business One Hanging Problem

Dear Sir,
We are using SAP B1 2005 on Windows 2003 Server Enterprise Edition. We have 13 users and there is an issue that SAP hang 5 to 7 times in a day on Server end also on clients end. That's we are facing too problem because due to this problem we are restarting the server when SAP hang. I have also checked the internet speed it comes 2.2Mbps. Now it become a big issue. So, I hope that we will surely get a best response from you for the same.
Thanks,
Pardeep Verma
09250046562

Dear Sir,
We are using SP1 2005 and running it on WINDOWS 2003 SERVER ENTERPRISE EDITION SP2.
h1 .ldf is 170 GB
H2 and, .mdf is 11 GB.
Server's configuration are:
INTEL(R) XEON CPU
E5507 @2.27GHZ
8GB OF RAM
and SQL Version is 2005
Thanks,
Pardeep Verma

SAP java connector SAPJCO problem..

Hi Friends..
 
*Can some one help me to solve this problem, 
I am just trying to connect our SAP server using SAPJava connector i,e, sapjco3. in windows (XP) platform. 
I am facing below mentioned problem...*
 
 
checkTID called for TID=0A0211C64C364B8158DA000C 
>>> Error occured on IDS800 connection 1-axsids00|sapgw00|IDS800 
com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "??????????????????????????u2020 u2020" with extension " PAYSAPIDL LS_CO ???" is unavailable. 
 at com.sap.conn.idoc.rt.DefaultIDocDocument.<init>(DefaultIDocDocument.java:126) 
 at com.sap.conn.idoc.jco.rt.JCoIDocDocument.<init>(JCoIDocDocument.java:90) 
 at com.sap.conn.idoc.jco.rt.JCoIDocDocument.createIDocDocument(JCoIDocDocument.java:168) 
 at com.sap.conn.idoc.jco.rt.JCoIDocRuntime.createIDocDocumentList(JCoIDocRuntime.java:78) 
 at com.sap.conn.idoc.jco.JCoIDoc$DefaultJCoIDocRuntime.createIDocDocumentList(JCoIDoc.java:198) 
 at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:96) 
 at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:153) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3276) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2756) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2574) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2465) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2286) 
 at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:270) 
 at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:333) 
 at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:231) 
 at java.lang.Thread.run(Thread.java:619) 
rollback called for TID=0A0211C64C364B8158DA000C>>> Error occured on IDS800 connection 1-axsids00|sapgw00|IDS800
com.sap.conn.jco.JCoException: (104) RFC_ERROR_SYSTEM_FAILURE: IDocException occurred(Raised by D00120|a_rfc) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException(MiddlewareJavaRfc.java:639) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2371) 
 at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:270) 
 at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:333) 
 at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:231) 
 at java.lang.Thread.run(Thread.java:619) 
Caused by: RfcException: [D00120-DCCCMS|a_rfc] 
 message: IDocException occurred 
 Return code: RFC_FAILURE(1) 
 error group: 104 
 key: RFC_ERROR_SYSTEM_FAILURE 
Exception raised by D00120-DCCCMS|a_rfc 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2761) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2574) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2465) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2286) 
 ... 4 more 
Caused by: RfcException: [D00120|a_rfc] 
 message: IDocException occurred 
 Return code: RFC_FAILURE(1) 
 error group: 104 
 key: RFC_ERROR_SYSTEM_FAILURE 
Exception raised by D00120|a_rfc
 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3305) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2756) 
 ... 7 more 
Caused by: com.sap.conn.idoc.IDocRuntimeException: IDocException occurred 
 at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:140) 
 at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:153) 
 at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:3276) 
 ... 8 more
Caused by: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "??????????????????????????u2020 u2020" with extension " PAYSAPIDL LS_CO ???" is unavailable.
 at com.sap.conn.idoc.rt.DefaultIDocDocument.<init>(DefaultIDocDocument.java:126) 
 at com.sap.conn.idoc.jco.rt.JCoIDocDocument.<init>(JCoIDocDocument.java:90) 
 at com.sap.conn.idoc.jco.rt.JCoIDocDocument.createIDocDocument(JCoIDocDocument.java:168) 
 at com.sap.conn.idoc.jco.rt.JCoIDocRuntime.createIDocDocumentList(JCoIDocRuntime.java:78) 
 at com.sap.conn.idoc.jco.JCoIDoc$DefaultJCoIDocRuntime.createIDocDocumentList(JCoIDoc.java:198) 
 at com.sap.conn.idoc.jco.rt.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:96) 
 ... 10 more
 
 
 
Regads,
Salil

Hi Mani,
Please if u can help me. Do let me know how you got the solution for it.Please
Regards
Laku

SAP R/3 MMC Problem

Similar Messages

Maybe you are looking for